swing gate openers - black box...
TRANSCRIPT
M O V E M E N T B R I N G S M O R E
Swing gate openers
- 2 -
Expertise through experience.The advantage.
With the expertise of 30 years of experience ELKA presents aconvincing range of innovative swing gate openers.
ELKA supplies convenient technology in an elegant design forthe varied gate installations.
ELKA swing gate openers are TÜV-testet according to EN 13241-1.
Our sales engineers on the phone support you in selecting thesuitable swing gate opener, answer detailed questions, andprovide the requested offer near-term.
We are there for you.
- 3 -
Responsible production.Our standard.
- 4 -
Our skills.
KOMET / EDLinear-rack gate openers
For gates up to 6,000mm und 500kg per wing
TERRA-SUnderfloor gate openerFor gates up to 3,500mm und 500kg per wing
ZENIT-SGate opener with articulated armFor gates up to 4,500mm und 450kg per wing
Product lines for a sophisticated
- 5 -
FOKUSin an aluminium gatepostor for gateposts on siteFor gates up to 3,000mm und 250kg per wing
ROLLERAny opening angleFor gates up to 4,000mm und 250kg per wing
M 315 - E 205 - E 202Locking devicesUp to 150mm stroke
and competitive choice.
- 6 -
������������ �������� ���������� ����������������
ZENIT-Sfor gates up to 4,500mm length per wing
- 7 -
* A perfect fixation of the gate in position OPEN and CLOSED is only possible with external stops.
Technical data
Max. length of wing with max. 50% wind resistanceMax. surface area of wing with max. 50% wind resistanceMax. weight of wingRequires electromagnetic bolt / motor lockEmergency releaseRunning time: depending on the opening angle and thespeed level (1-8) selected on the controllere. g. opening angle 90°, selected level 8 (fastest)Max. opening angleInternal stopsExternal stops required at GATE OPEN position*External stops required at GATE CLOSED position*Power supplyMotor voltageDuty cycle
3,000mm7.5sqm300kg
no
approx. 12s
yesno
recommended*230V/50Hz
24V dc50%
4,500mm10.0sqm450kg
yes
approx. 12s
yesnoyes
230V/50Hz24V dc50%
on the side of the articulated arm
up to 120°, depending on the mounting dimensions
InnovativeThe ZENIT-S is a durable swing gate opener with articulated arm, which convinces at firstsight.The accurately adjusted recirculating ballscrew ensures an even pass of motion of thegate.The easily adjustable internal stops permit the use without external stops for GATE OPEN.For gates with up to 3,000mm length per wing, even for GATE CLOSED external stopsare not required.
FlexibleThe ZENIT-S is suitable for the varied installation situations – four different articulatedarm versions are available. For more information see pages 20 and 21.
ProfessionalThe controller MO 36 with its future-orientated logic meets nearly all possible customerrequirements. For more information see page 17.
ZENIT-S 300for gates with one wing
ZENIT-S 302for gates with two wings
ZENIT-S 450for gates with one wing
ZENIT-S 452for gates with two wings
- 8 -
������������ ����������������������� ����������������
TERRA-Sfor gates up to 3,500mm length per wing
- 9 -
* A perfect fixation of the gate in position OPEN and CLOSED is only possible with external stops.
Technical data
Max. length of wing with max. 50% wind resistanceMax. surface area of wing with max. 50% wind resistanceMax. weight of wingRequires electromagnetic bolt / motor lockEmergency release, opener installed under the gateEmergency release, opener installed next to the gateRunning time: depending on the opening angle and thespeed level (1-8) selected on the controllere. g. opening angle 90°, selected level 8 (fastest)Max. opening angleInternal stopsExternal stops required at GATE OPEN position*External stops required at GATE CLOSED position*Power supplyMotor voltageDuty cycle
2,500mm6.25sqm500kg
no
approx. 12s
yesno
recommended*230V/50Hz
24V dc50%
3,500mm8.75sqm500kg
yes
approx. 12s
yesnoyes
230V/50Hz24V dc50%
from inside and outside
up to 180°, depending on the mounting dimensions
from inside
InnovativeThe TERRA-S is a unique underfloor gate opener, which convinces due to its solidworkmanship.The accurately adjusted recirculating ballscrew ensures an even pass of motion of thegate.The easily adjustable internal stops permit the use without external stops for GATE OPEN.For gates with up to 2,500mm length per wing, even for GATE CLOSED external stopsare not required.
DurableThe stable frame structure transfers the weight of the gate and the torsional force intothe foundation.The support plate of the mechanics is connected with the plastic bowl by the manufacturer.The housing is hermetically sealed through the grinded cover plate made of stainlesssteel. For adjusting purposes a comfortable opening is provided.
FlexibleThe TERRA-S is suitable for the varied installation situations. For more information seepages 22 and 23.
ProfessionalThe controller MO 36 with its future-orientated logic meets nearly all possible customerrequirements. For more information see page 17.
TERRA-S 350for gates with one wing
TERRA-S 352for gates with two wings
TERRA-S 250for gates with one wing
TERRA-S 252for gates with two wings
- 10 -
KOMETfor gates up to 6,000mm length per wing
- 11 -
ElegantThe KOMET is a robust gate opener with linear-rack-technology in an elegant housingmade of anodized aluminium and impact-resistant ABS.
InnovativeThe linear-rack and the toothed wheels made of galvanized steel make the difference.They ensure a reliable and exemplary silent operation. The emergency release from topand bottom are another feature. A convincing technology.
DurableThe stable substructure withstands vertical compressive force up to 150kg.
FlexibleThe KOMET is suitable for the varied installation situations. One reason is the swivellingconnection for rising terrain. For more information see pages 24 and 25.
ProfessionalThe controller MO 36 with its future-orientated logic meets nearly all possible customerrequirements. For more information see page 17.
* A perfect fixation of the gate in position OPEN and CLOSED is only possible with external stops.
Technical data
Max. length of wing with max. 50% wind resistanceMax. surface area of wing with max. 50% wind resistanceMax. weight of wingMax. strokeRequires electromagnetic bolt / motor lockEmergency release at the gate openerRunning time: depending on the stroke and thespeed level (1-8) selected on the controllere.g. A) utilised stroke 280mm, level 8 (fastest)e.g. B) utilised stroke 350mm, level 8 (fastest)e.g. C) utilised stroke 500mm, level 8 (fastest)Max. opening angleInternal stopsExternal stops required at GATE OPEN position*External stops required at GATE CLOSED position*Power supplyMotor voltageDuty cycle
2,000mm5.0sqm200kg
370mmno
approx. 12sapprox. 16s
-
noyesyes
230V/50Hz24V dc50%
2,800mm7.0sqm300kg
370mmno
approx. 12sapprox. 16s
-
yesnono
230V/50Hz24V dc50%
4,000mm10.0sqm400kg
370mmyes
approx. 12sapprox. 16s
-
noyesyes
230V/50Hz24V dc50%
6,000mm12.0sqm500kg
500mmyes
--
approx. 24s
noyesyes
230V/50Hz24V dc50%
from top and bottom
up to 120°, depending on the mounting dimensions
KOMET 200for gates with one wing
KOMET 202for gates with two wings
KOMET 280for gates with one wing
KOMET 282for gates with two wings
KOMET 400for gates with one wing
KOMET 402for gates with two wings
KOMET 600for gates with one wing
KOMET 602for gates with two wings
- 12 -
FOKUS
for gates up to 3,000mm length per wing
the swing gate opener in analuminium gatepost
For the gate builder:You wish to configure your own gatepost? In this case ELKA suppliesthe complete operator unit and the controller.
Illustration: FOKUS 155, custom colour anthracite greyExtras: Intercom system, doorbell, light, terminal row, loop detector
The perfect combination.Your gate leaf - our gate opener
- 13 -
* A perfect fixation of the gate in position OPEN and CLOSED is only possible with external stops.
Technical data
Max. gatepost heightGatepost dimensions outsideGatepost dimensions inside min.Max. length of wing with max. 50% wind resistanceMax. surface area of wing with max. 50% wind resistanceMax. weight of wingup to 2,000mm length of wingup to 2,500mm length of wingup to 3,000mm length of wingRequires electromagnetic bolt / motor lockEmergency releaseRunning time: depending on the opening angle and thespeed level (1-8) selected on the controllere.g. opening angle 90°, level 8 (fastest)Max. opening anglea) standard installationb) gatepost turned 90°External stops required at OPEN and CLOSED position*a) standard designb) with optional internal stops up to 2,500mmPower supplyMotor voltageDuty cycle
1,250mm200x200mm
-3,000mm3.75sqm
250kg200kg150kg
inside gatepost
approx. 14s
95°180°
yesno
230V/50Hz24V dc50%
for 2,500mm length of wing and larger
FOKUS 125for gates with one wing
FOKUS 125/2for gates with two wings
FOKUSDrive assembly
for gatepostson site
1,550mm200x200mm
-3,000mm4.65sqm
200kg160kg120kg
inside gatepost
approx. 14s
95°180°
yesno
230V/50Hz24V dc50%
2,500mm-
194x194mm3,000mm7.5sqm
250kg250kg250kg
inside gatepost
approx. 14s
95°180°
yes4.65sqm and larger
230V/50Hz24V dc50%
ElegantWhether made of wrought iron, plastic material, steel, or wood – the FOKUS suits everygate leaf. The gate layout keeps its original appearance. The complete drive unit is notvisible – just like an underfloor gate opener.
ConvenientThe gatepost of the FOKUS is made of raw aluminium. Upon request ELKA supplies thegatepost in any RAL colour. You may configure the gatepost according to your client’srequest, e.g. with a doorbell, an intercom system, or with lighting.ELKA will gladly assemble the complete gatepost according to your requirements.
FlexibleThe FOKUS is suitable for the varied installation situations. When the gate post is turned90°, an opening angle of max. 180° is possible.
ProfessionalThe controller MO 36 with its future-orientated logic meets nearly all possible customerrequirements. For more information see page 17.
FOKUS 155for gates with one wing
FOKUS 155/2for gates with two wings
- 14 -
ROLLER for any opening anglefor gates up to 4,000mm length per wing
- 15 -
Technical data
Max. length of wing with max. 50% wind resistanceMax. surface area of wing with max. 50% wind resistanceMax. weight of wingRequires electromagnetic bolt / motor lockEmergency releaseRunning time: depending on the opening angle and thespeed level (1-5) selected on the controllere. g. opening angle 90°, wing length 2,500mm,level 5 (fastest)
Max. opening angleExternal stops required at GATE OPEN positionExternal stops required at GATE CLOSED positionPower supplyMotor voltageDuty cycle
4,000mm6.0sqm250kg
recommendedat the gate opener, to engage
approx. 11sanyyesyes
230V/50Hz24V dc30%
Simply differentWithin 15 years of permanent enhancement the ROLLER matured into a high-qualityswing gate opener with many advantages. Just install it at the gate leaf using four screws.The silent rolling technology is convincing. An inexpensive solution for privately usedgates.
InnovativeThe ROLLER overcomes bumps and rising terrain up to 180mm. The wheel is pressed tothe ground by spring force, so that a maximum of adhesion is ensured.
FlexibleThe ROLLER is suitable for the varied installation situations and for any required openingangle. For more information see page 27.
ProfessionalThe controller MO 36 with its future-orientated logic meets nearly all possible customerrequirements. For more information see page 17.
ROLLER 1for gates with one wing
ROLLER 2for gates with two wings
- 16 -
ED 180 - ED 182for gates up to 1,800mm length per wing
Technical data
Max. length of wing with max. 50% wind resistanceMax. surface area of wing with max. 50% wind resistanceMax. weight of wingMax. strokeRequires electromagnetic bolt / motor lockEmergency releaseRunning time: depending on the stroke and thespeed level (1-8) selected on the controllere. g. utilised stroke 270mm, level 8 (fastest)
Max. opening angle
Internal stops at GATE CLOSED position*External stops required at GATE CLOSED positionExternal stops required at GATE OPEN positionPower supplyMotor voltageDuty cycle
1,800mm2.7sqm150kg
270mmno
at the gate opener
approx. 12sup to 110°, depending on the mounting dimensions
optionalyes (not when using internal stops)
yes230V/50Hz
24V dc30%
ED 180for gates with one wing
ED 182for gates with two wings
* A perfect fixation of the gate in position OPEN and CLOSED is only possible with external stops.
QualityThe ED 180 is a proven gate opener with linear-rack-technology for privately used gates. It is equippedwith a high-quality hood made of anodized aluminium and impact-resistant ABS.
InnovativeThe linear-rack and the toothed wheels made of polyamide B ensure a silent operation.
FlexibleThe ED 180 is suitable for the varied installation situations. For more information see page 26.
ProfessionalThe controller MO 36 with its future-orientated logic meets nearly all possible customer requirements.For more information see page 17.
- 17 -
Controller MO 36for all ELKA swing gate openers, 24V
Professional details
Obvious detailsFor swing gate openers with 1 or 2 wingsPower supply 230V/50HzMotor voltage 24V dcSoft-start and soft-stop, stagelessOne button or three button inputSpeed selectable in 8 steps for OPEN andCLOSE separately for each gate wingForce adjustable for OPEN and CLOSEseparately for each wingStop and reversing for a short distance oncontact with an obstaclePedestrian opening function, selectableAutomatic closure, programmable (1-299s)Pre-warning prior to opening and closingseparately selectable (4s)Warning light connection, potential free,max. 230V/60WTraffic light connection (red), potential free,max. 230V/60WTraffic light connection (green), potentialfree, max. 230V/60WLED-display for motor voltage, safety contactprofiles, photo-cells, and all command inputs
Two separate photo-cell systems for insideand outside installation with patentedtesting function for up to 6 photo-cells each.Lockage function by photo-cells, selectable.Safety contact profile detection for OPENand CLOSE separately, 8.2kOhmMulti-functional relay for third radio remotecontrol channel, e.g. for exterior lightingPressure relief of electromagnetic bolt –deactivation possibleGust suppression selectable (1 to 9s – onlywith safety devices)Emergency mode by button on the controllerin case of failure of a safety device, afterapprox. 10s via dead man’s function
����������
Connection for optionaltraffic light module
Socket for optional ELKAradio remote control receiver, 434MHz,channel 1 for complete openingchannel 2 for partial opening
Socket for optionalELKA 7-day-timer module
Plug-terminals for easy installation
- 18 -
Locking devicesMotor lock M 315Stainless steel floor bolt Ø 30mmMax. stroke 150mm
Dimensions (wxlxh)146x146x440mm
Dimensions (wxlxh)E 205: 58x92x298mmE 202: 54x51x210mm
Electromagnetic boltsE 205 E 202Stainless steel boltØ 20mmStroke 50mm
Stainless steel boltØ 20mmStroke 15mm
Max. stroke 150mm
Stroke 50mm Stroke 15mm
The ELKA motor lock M 315 is designed to lock swinggates. For applications with highest requirements forsafety and functionality, the M 315 is the best choice.
Emergency release by swivelling lever lock with profilecylinder.
The controller MO 90 is equipped with three control inputs– potential free, 24V, or 230V. An input for the reversingfunction of the floor bolt, a running time limitation up to3s, and a stop contact round out the profile. Reportingback for OPEN and CLOSED connectable.
The ELKA electromagnetic bolts E 205 and E 202 aredesigned to lock swing gate openers in connection withthe controller MO 36.
For 230V controllers ELKA supplies a matching transformerupon request.
The bolts lock either down or sideways – with the E 202also upwards.
- 19 -
Accessories
SK MIDIwith code switch, very goodrange, 1- to 4-channel,with eyelet hole for keyring,434MHz
SK WDwith code switch, very goodrange, 1-, 2-, and 4-channel,with eyelet hole for keyring,weatherproof casing,434MHz
SKI MAXIwith code switch, very goodrange, 1- to 4-channel,industrial size,434MHz
SKJ MINIwithout code switch, code sto-ring only in connection with SK-,SKX-, or SKI-transmitter, goodrange, 2-channel, the ideal se-cond transmitter for keyring,434MHz
Radio remote control transmitters
Code switcheswith stainless steel keypad(vandalism protected)
Card reader ZUKO 1000to insert cards, for max. 1000coded magnetic cards
Key switchflush or surface mounting
Intercom system
Access control
Flashing light230V, 40W
Traffic lights230V, 40W, red or green
Photo-cells24V, transmitter and receiver
Safety contact profileActivation at 19 or 41mmcompression
Signal lights and safety
- 20 -
Swing gate opener ZENIT-S
��������
��������������������������������� ������������������������������
��������������������������������� �����������������������������������
- 21 -
��������!���������
����������������������������
����������������������������
�������������������������
������������������������������
- 22 -
Swing gate opener TERRA-S
��������
��������� ��������������� ����������������������"�������������#$%
��������������������������������������� ��������������������������������
- 23 -
�����!���������� ��������������� �����!����������������������"�������������!��#$%
�����!��������������������������������������� �����!���������������������������������
- 24 -
Swing gate opener KOMET
��������
�����������������&'(�)��$$*��#$*�����$$+���� ���������,
�����������������&'(�)�-$$+���� ���������,
���������������������� �����!�&'(�)��$$�-$$
- 25 -
Installation dimensions - Opening angles
Table of opening angles KOMET 200 corresponding to the measurements A and BOpening angle
90° 95°100°105°110°115°120°
A / B *180 / 180180 / 170
-----
A / B *140 / 140140 / 130150 / 130160 / 130170 / 130180 / 130180 / 120
A / B *150 / 150150 / 140160 / 140170 / 140180 / 140
--
A / B *160 / 160160 / 150170 / 150180 / 150
---
A / B *170 / 170170 / 160180 / 160
----
Table of opening angles KOMET 280 corresponding to the measurements A and BOpening angle
90° 95°100°105°110°115°120°
A / B *180 / 180180 / 170
-----
A / B *150 / 150150 / 140160 / 140160 / 130170 / 130180 / 130180 / 120
A / B *160 / 160160 / 150170 / 150170 / 140180 / 140
--
A / B *170 / 170170 / 160180 / 160180 / 150
---
Table of opening angles KOMET 400 corresponding to the measurements A and BOpening angle
90° 95°100°105°110°115°120°
A / B *180 / 180180 / 170
-----
A / B *160 / 160160 / 150170 / 150170 / 140180 / 140180 / 130180 / 120
A / B *170 / 170170 / 160180 / 160180 / 150
---
Table of opening angles KOMET 600 corresponding to the measurements A and BOpening angle
90° 95°100°105°110°115°120°
A / B *225 / 225225 / 210225 / 195225 / 180240 / 180240 / 165240 / 150
A / B *240 / 240240 / 225240 / 210240 / 195
---
* Measurements in mm
- 26 -
Swing gate opener ED 180
��������
.�������������� �����!����
�����������������+������� ��
Opening angle 95° 100° 105°
A / B*130 / 130130 / 120130 / 110
'���������������#$����������������������������/����0
.������������������!����
1���������������
- 27 -
Swing gate opener ROLLER
'2���������������!!��������!����"�#$��
��������
'����������3$% '�����������#$%
'������������,%
Please request detai led brochures - f ree of charge
We reserve the right to make technical alternations.
M O V E M E N T B R I N G S M O R E
M O V E M E N T B R I N G S M O R E
Barrier systemsSlide gate openers