swh standard rail swh ecolite rail
TRANSCRIPT
9628 Valley Blvd. Rosemead, CA 91770 | Phone 626-579-3288 | [email protected]
SWH Racking System Data Sheet Version 12.10.v2
Splice bar material: 6005-T5 extruded aluminum alloyFinish: Clear or black anodizedSelf-tapping screw material: 304 stainless steelSplice bar weight: 0.32 lbs A thermal break is required every 40 feet of continously connected rail. For additional concerns on thermal breaks in your specific project, please consult a licensed structural engineer.Expansion joints prevent buckling of rails due to thermal expansion. Splice bars may be used for thermal expansion joints. To create a thermal expansion joint, slide the splice bar between the rail segments. Secure the splice bar with two screws on one side only. Footings (such as L-brackets or standoffs) should be secured normally on both sides of the splice. No PV module or mounting hardware component should straddle the expan-sion joint.
•••••
•
SWH 6” F Splice Barfor Standard Rail & Ecolite Rails
MFG-PN: MR-SW-SB-03M, MR-SW-SB-03B
SWH Ecolite Rail
6” F Splice bar
Self-tapping screws
SWH Standard Rail
6 inches
CONFORMS TO UL SUB 2703
4009330