Sewing

StringingCHRISTMAS COLLAR“ANTIQUE GLAMOUR”

Product Group Article No.Article Amount Size Color Color Code

SWAROVSKI ELEMENTS

Gold Chain, 12 cm

Gold Crimping Tube, 8 cm

27x Gold Jump Rings, 5mm

Gold Leather, 6x30 cm

1x Gold Lobster Clasp

Transparent Nylon Thread, 0.35mm, 3m

Gold Ribbon, 2cm, 80cm

Gold Sewing Thread

8x Gold Split Rings, 5mm

Gold Tiger Tail, 0.30mm, 1.2m

Crimping Pliers

Double Sided Tape

Flat Nose Pliers

Glue

Scissors

Sewing Needle

Sheet of Paper

Side Cutter

Tools

Supplies

Supplies & Tools

Round Stones 1201 1 pc. 27 mm 202Aquamarine F

Round Stones 1201 1 pc. 27 mm 502Fuchsia F

Round Stones 1201 1 pc. 27 mm 246Lt Colorado Topaz F

Round Stones 1201 1 pc. 35 mm 280 HEMJet Hematite F

Fancy Stones 4196 1 pc. 30x26 mm 207Montana F

Beads 5328 100 pcs. 4 mm 266Denim Blue

Crystal Pearls 5810 22 pcs. 3 mm 001 600Crystal Petrol Pearl

Crystal Pearls 5810 46 pcs. 8mm 001 600Crystal Petrol Pearl

Pendants 6128 21 pcs. 10 mm 001 COPCrystal Copper

5 cm

STEP 1: Draw a 5cm diameter circle. Stick double sided tape on the back.

STEP 2: Place the pattern on top of a piece of leather and cut out the circle.

STEP 3: Cut a 1m piece of 0.35mm nylon thread. Start stitching from the back of the leather to the front 3mm in from the edge. Stitch on the SWAROVSKI ELEMENTS Crystal Pearl article 5810, 3mm Crystal Petrol Pearl as shown.

1 m0.35 mm

1 m

3mm

Repeat

STEP 4: Pull the nylon threads to get the shape shown below. Remove the tape and fit in the SWAROVSKI ELEMENTS Round Stone article 1201, 35mm Jet Hematite. Tie a double knot with both thread ends. Stitch one thread end to the other side so that there is one thread on both sides.

STEP 5: Cut a nylon thread 50cm long. Stitch four back stitches on one end of the 20cm long piece of ribbon leaving a space of 1.5cm at one end. Then stitch through to the other end leaving a 1.5cm space at this end as well.

0.35mm50cm 1=x4 2

20cm

1/2

1.5cm1.5cm

STEP 6: Stitch the ends together leaving the 1.5cm space as done above. Fold the ribbon ends inward and sew them on to the ribbon as depicted. Repeat steps 5 and 6 three more times to make the other three ribbon pieces.

Repeat steps 5 - 6 x3

STEP 7: Cut a 5cm leather circle. Put this pattern on a leather piece and cut out four circular pieces of leather all together. Stick these leather pieces on the back side of each of the ribbon pieces.

Glu

e

5cm

Repeat step x3

Repeat step x3

STEP 8: Glue the Fancy Stone article 4196, 30 x 26mm Montana from the SWAROVSKI ELEMENTS assortment in the middle of one of the ribbon pieces. Repeat this step with the remaining SWAROVSKI ELEMENTS Round Stones article 1201.

Glu

e

Repeat step x3

STEP 9: Pin all ribbons together as shown and then stitch them together with sewing thread. Stitch the leather piece from step 4 as well as shown using the two loose ends of nylon thread.

STEP 10: Attach the jump ring along with a SWAROVSKI ELEMENTS Pendant article 6128, 10mm Crystal Copper to the ribbon as shown below. Repeat this step 20 more times to attach all the other jump rings and SWAROVSKI ELEMENTS onto the ribbons.

Repeat step x20

STEP 11: Cut four 30cm long pieces of tiger tail. Slide on 23 SWAROVSKI ELEMENTS Crystal Pearls article 5810, 3mm Crystal Petrol Pearls, one crimp tube and one split ring onto one piece of tiger tail. Slide the tiger tail back through the crimp tube. Pull it tight, crimp the crimping tube and cut off the extra tiger tail at this end. Repeat to crimp and fix another split ring to the other end. Repeat this step one more time to get another string of Crystal Pearls.

30cm x4

1/2

3

x23

321

Repeat step 11 x1

STEP 12: Repeat step 11 once more to get two bead strands using Beads article 5328, 4mm Denim Blue from the SWAROVSKI ELEMENTS assortment.

Repeat step 11 x1

STEP 13: Open a jump ring and slide it through the ribbon rosettes and Crystal Pearl and Bead strands on one end. On the other end of these strands attach an extension chain with one more jump ring. Similarly slide on another jump ring through the ribbon rosettes on the other side and attach the other set of Crystal Pearl and Bead strands. On the other end of this strand attach a lobster clasp with one jump ring as show in the illustrations.