Surrogate Key Generator Implementation in Datastage 8.1, 8.5 and 9.1

The Surrogate Key Generator stage is a processing stage that generates surrogate key columns and maintains the key source.A surrogate key is a unique primary key that is not derived from the data that it represents, therefore changes to the data will not change the primary key. In a star schema database, surrogate keys are used to join a fact table to a dimension table.Surrogate key generator stage uses:1. Create or delete the key source before other jobs run2. Update a state file with a range of key values3. Generate surrogate key columns and pass them to the next stage in the job4. View the contents of the state file

Generated keys are 64 bit integers and the key source can be stat file or database sequence.

Surrogate keys are used to join a dimension table to a fact table in a starschema database.

When the SCD stage performs a dimension lookup :A) If a matching record is found, it retrieves the value of the existingsurrogate key.B)If a match is not found, the stage obtains a new surrogate key value byusing the derivation of the Surrogate Key column on the Dim Update tab. If you want the SCD stage to generate new surrogate keys by using akey source that you created with a Surrogate Key Generator stage asdescribed in Surrogate Key Generator. If you want to use your own method to handle surrogate keys, youshould derive the Surrogate Key column from a source column.You can replace the dimension information in the source data stream with thesurrogate key value by mapping the Surrogate Key column to the output link.

Creating the key Source :

Drag the surrogate key stage from palette to parallel job canvas with no input and output links.

Double click on the surrogate key stage and click on properties tab.

Properties:Key Source Action = createSource Type : FlatFile or Database sequence(in this case we are using FlatFile)When you run the job it will create an empty file.If you want to the check the content change the View Stat File = YES and check the job log for details.skey_genstage,0: State file /tmp/skeycutomerdim.stat is empty.if you try to create the same file again job will abort with the following error.skey_genstage,0: Unable to create state file /tmp/skeycutomerdim.stat: File exists.Deleting the key source:

Updating the stat File:To update the stat file add surrogate key stage to the job with single input link from other stage.We use this process to update the stat file if it is corrupted or deleted.1 1.Open the surrogate key stage editor and go to the properties tab.

If the stat file exists we can update otherwise we can create and update it.We are usingSkeyValue parameter to update the stat file using transformer stage.

Generating Surrogate Keys:

Now we have created stat file and will generate keys using the stat key file.Click on the surrogate keys stage and go to properties add add type a name for the surrogate key column in theGenerated Output Column Nameproperty.

Go to ouput and define the mapping like below.

Rowgen we are using 10 rows and hence when we run the job we see 10 skey values in the output.I have updated the stat file with 100 and below is the output.

If you want to generate the key value from begining you can use following property in the surrogate key stage.

A.If the key source is a flat file, specify how keys are generated: 1.To generate keys in sequence from the highest value that was last used, set theGenerate Key from Last Highest Valueproperty toYes. Any gaps in the key range are ignored.2.To specify a value to initialize the key source, add theFile Initial Valueproperty to the Options group, and specify the start value for key generation.3.To control the block size for key ranges, add theFile Block Sizeproperty to the Options group, set this property to User specified, and specify a value for the block size.B.If there is no input link, add theNumber of Recordsproperty to the Options group, and specify how many records to generate.