surge protection devices surge protection devices · 2020. 6. 12. · the lsp3 surge protection...

2
WWW.HATCHLIGHTING.COM • 7821 W OO DLAN D C E NT ER B LVD . T AMPA, FL 33614 • P H: 813.288.8006 • FX: 813.288.8105 • S AL E S @H ATCH L IGHTING . COM REV :11122019 ® LSP3 Family LSP10-SM SNAP LOCK TM LSP4 Family Field or Factory Installable Field or Factory Parallel-type SPDs Installable Surge Protection Devices WWW.HATCHLIGHTING.COM ● 7821 Woodland Center Blvd. Tampa, FL 33614 ● PH: 813.288.8006 ● FX: 813.288.8105 ● [email protected] ● REV: 05262020 SURGE PROTECTION DEVICES Hatch surge protection devices (SPDs) were designed with the lighting indus- try in mind. All are parallel-type SPDs and are UL-recognized per UL1449. These SPDs are available in a wide variety of protection levels and form factors and provide complete parallel protection for all equipment integrated into luminaires including drivers, ballasts, occupancy sensors and other mod- ules connected to line voltage. The Hatch LSP3 surge protection devices are available in 120-277V and 347-480V models. The LSP3-10(L) model provides single phase protection for line/neutral, line/ground and neutral/ground in accordance with recommenda- tions in IEEE C62.41.2-2002 Category C Medium Exposure and the surge limits and testing requirements specified in ANSI C82.77 for lighting equipment, Cate- gory C medium exposure level. The LSP3-20(L) model provides protection per ANSI C82.77 for lighting equipment, Category C high exposure level. The LSP3 series offers protection for LED luminaires and includes integrated thermal protection and an EOL (end-of-life) LED indicator that monitors the protection status for L/N, L/G, and N/G. The LSP3 surge protection device is a Type 4CA SPD in a small, flat form factor. The Hatch LSP4 surge protection devices are available in 120-277V and 347-480V models. These SPDs provide 20kA differential-mode and 10kA com- mon-mode single phase protection for line/neutral, line/ground and neu- tral/ground in accordance per surge recommendations in IEEE C62.41.2-2002 Category C Medium Exposure and the surge limits and testing requirements specified in ANSI C82.77 for lighting equipment, Category C medium exposure level. The LSP4 is a Type 5 SPD and is rated for IP65 environmental exposure levels. The LSP10-SM is designed to be used in conjunction with LED drivers and fixtures to provide an additional level of protection against powerline disturbanc- es in industrial, commercial, and residential applications per surge recommen- dations in IEEE C62.41.2-2002 Category C Medium Exposure and the surge limits and testing requirements specified in ANSI C82.77 for lighting equipment, Category C medium exposure level. The LSP10-SM features an easy-to-inte- grate SNAPLOCK housing and integrated thermal fusing. This SPD provides a 10kA single phase protection for line/neutral, line/ground and neutral/ground and is a Type 4CA SPD for field or factory installation. End-of-life Indicator LED LED illuminated: SPD is protecting LED is dark: Replace SPD

Upload: others

Post on 01-Oct-2020

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SURGE PROTECTION DEVICES Surge Protection Devices · 2020. 6. 12. · The LSP3 surge protection device is a Type 4CA SPD in a small, flat form factor. The Hatch LSP4 surge protection

WWW.HATCHLIGHTING.COM • 7821 W OO DLAN D C E NT ER B LVD . T AMPA, FL 33614 • P H: 813.288.8006 • FX: 813.288.8105 • S AL E S @H ATCH LIGHTING .COM REV :11122019

®

LSP3 Family

LSP10-SM

SNAPLOCKTM

LSP4 Family

Field or FactoryInstallable

Field or Factory

Parallel-type SPDs

Installable

Surge Protection Devices

WWW.HATCHLIGHTING.COM ● 7821 Woodland Center Blvd. Tampa, FL 33614 ● PH: 813.288.8006 ● FX: 813.288.8105 ● [email protected] ● REV: 05262020

SURGE PROTECTION DEVICES

Hatch surge protection devices (SPDs) were designed with the lighting indus-try in mind. All are parallel-type SPDs and are UL-recognized per UL1449. These SPDs are available in a wide variety of protection levels and form factors and provide complete parallel protection for all equipment integrated into luminaires including drivers, ballasts, occupancy sensors and other mod-ules connected to line voltage.

The Hatch LSP3 surge protection devices are available in 120-277V and 347-480V models. The LSP3-10(L) model provides single phase protection for line/neutral, line/ground and neutral/ground in accordance with recommenda-tions in IEEE C62.41.2-2002 Category C Medium Exposure and the surge limits and testing requirements specified in ANSI C82.77 for lighting equipment, Cate-gory C medium exposure level. The LSP3-20(L) model provides protection per ANSI C82.77 for lighting equipment, Category C high exposure level. The LSP3 series offers protection for LED luminaires and includes integrated thermal protection and an EOL (end-of-life) LED indicator that monitors the protection status for L/N, L/G, and N/G.

The LSP3 surge protection device is a Type 4CA SPD in a small, flat form factor.

The Hatch LSP4 surge protection devices are available in 120-277V and 347-480V models. These SPDs provide 20kA differential-mode and 10kA com-mon-mode single phase protection for line/neutral, line/ground and neu-tral/ground in accordance per surge recommendations in IEEE C62.41.2-2002 Category C Medium Exposure and the surge limits and testing requirements specified in ANSI C82.77 for lighting equipment, Category C medium exposure level.

The LSP4 is a Type 5 SPD and is rated for IP65 environmental exposure levels.

The LSP10-SM is designed to be used in conjunction with LED drivers and fixtures to provide an additional level of protection against powerline disturbanc-es in industrial, commercial, and residential applications per surge recommen-dations in IEEE C62.41.2-2002 Category C Medium Exposure and the surge limits and testing requirements specified in ANSI C82.77 for lighting equipment, Category C medium exposure level. The LSP10-SM features an easy-to-inte-grate SNAPLOCK housing and integrated thermal fusing.

This SPD provides a 10kA single phase protection for line/neutral, line/ground and neutral/ground and is a Type 4CA SPD for field or factory installation.

End-of-life Indicator LED

LED illuminated: SPD is protectingLED is dark: Replace SPD

Page 2: SURGE PROTECTION DEVICES Surge Protection Devices · 2020. 6. 12. · The LSP3 surge protection device is a Type 4CA SPD in a small, flat form factor. The Hatch LSP4 surge protection

Model Number LSP10-SM LSP4-UNV LSP4-480 LSP3-10-UNV* LSP3-20-UNV* LSP3-20-480*Input Voltage 120-277V 120-277V 347-480V 120-277V 120-277V 347-480VMaximum Continuous Voltage 320V 320 550 385 385 550Pulse Rating (8 x 20 uSec) 10kA **10kA **10kA 10kA 20kA 20kANominal Discharge Current 5kA 5kA 5kA 5kA 10kA 10kAThermal Protection

Field Wiring

UL Type 4CA 5 5 4CA 4CA 4CA

SPECIFICATIONS

TYPICAL WIRING DIAGRAM

*Models available with end-of-life indicator. Ex: LSP3-10L-UNV** Line-Neutral Pulse Rating 20kA

Pulse Rating (8 x 20 μSec)

Surge Level

# of Strikes

*L-N L-G, N-G

10,000A *2 1

6,500A 4 2

5,000A 30 15

2,000A 200 100

700A 2000 1000

*1 strike at 20,000A

LSP4-UNV, LSP4-480

IEEE 62.41 PULSE RATINGS

WWW.HATCHLIGHTING.COM • 7821 W OO DLAN D C E NT ER B LVD . T AMPA, FL 33614 • P H: 813.288.8006 • FX: 813.288.8105 • S AL E S @H ATCH LIGHTING .COM REV :11122019

Pulse Rating(8 x 20 μSec)

Surge Level

# of Strikes

L-N, L-G, N-G

10,000A 16,500A 2

5,000A 15

2,000A 100

700A 1000

Pulse Rating(8 x 20 μSec)

Surge Level

# of Strikes

L-N, L-G, N-G

20,000A 115,000A 2

10,000A 15

4,000A 100

1,400A 1000

LSP10-SM, LSP3-10-UNVLSP3-20-UNV, LSP3-20-480

®

HATCHSPDs

WWW.HATCHLIGHTING.COM ● 7821 Woodland Center Blvd. Tampa, FL 33614 ● PH: 813.288.8006 ● FX: 813.288.8105 ● [email protected] ● REV: 05262020

SURGE PROTECTION DEVICES