surface finishing specialists...surface finishing solutions to automotive bodyshops, valeters, boat...

WOOD

Far Simpler... Far Better...

SURFACE

SPECIALISTSFINISHING

1 2

Farécla Products Ltd is a UK, family-owned company, manufacturing surface finishing products which are used on a wide variety of substrates. From compounds and applicators, to paint cups and microfibre cloths, Farécla has provided surface finishing solutions to automotive bodyshops, valeters, boat builders, wood workers, composite manufacturers and other industrial applications since 1952, now in over 120 countries.

ABOUTFARÉCLA

LABOUR SAVING

QUALITY ASSURANCE

COST SAVING

PERMANENT RESULTS

The bespoke Engineered Abrasive Technology we use inour formulations achieves a faster cut rate which deliversa final finish requiring less time and fewer steps.

Our scientists use only the best quality raw materials. Our proprietary formulations are manufactured under tight control to deliver reliability and consistency from the first drop to the last.

Our technology achieves a better result than competitorswhilst using less product, improving productivity to delivergreater value to our customers.

Our products deliver a superior and permanent high gloss finish avoiding the risk of drop back and the need for reworks.

PROFILE COMPOUNDS AND WAXES G MOP APPLICATORSFAR SUPERIOR TECHNOLOGY FAR MORE ADVANCED TECHNOLOGY

FIG. 1 - 54x magnifi cation of the open cell structure of a G Mop High Cut Foam (GMC818).

FIG. 2 - A G Mop High Cut Foam (GMC618) and G Mop Flexible Back Plate (GMB146) easily compounding curved surfaces.FIG. 2 - A Farécla abrasive particle diminishing graph

POLISHING TIME

FIG. 1 - Unique Farécla abrasive powder

Designed by our scientists to provide fast, permanent solutions for surface fi nishing, Farécla’s compounds contain diminishing abrasives that do 2 jobs in 1:PHASE 1 - Abrasive particles mechanically cut away the scratch marks left aft er sanding. Throughout this phase, they steadily diminish in aggression.PHASE 2 - Diminished abrasives polish the surface to a deep gloss fi nish. (See FIG. 2).

The unique abrasive technology in Farécla products have been tailor made for Farécla in order to optimise the fi ne balance between cut and polish, achieving a superb, permanent fi nish in rapid time.

3 4

The material and design of applicator pads are essential to the performance of compounds and the results achieved on surfaces. Farécla G Mop Applicators have been engineered and tested in line with our abrasive products to deliver the best possible performance for surface rectifi cation.OPEN CELL STRUCTURE - For dry use products, allowing airto fl ow through, helping to limit the surface overheating during polishing, and provide more aggresion! (See FIG. 1).CLOSED CELL STRUCTURE - For wet use products, where water can be used to help lubrication and limit overheating.The G Mop Yellow Compounding Foams can be used withor without water.FLEXIBLE AND THIN PADS AND BACK PLATES - For riding swages and compounding evenly over the surface, especially in diffi cult to reach areas. (See FIG. 2).

G Mop Finishing FoamGMF301 (3” / 75mm)GMF601 (6” / 150mm)GMF801 (8” / 200mm) - see page 16CutGloss

G Mop Lambs Wool PadGML301 (3” / 75mm)GML601 (6” / 150mm)GML801 (8” / 200mm) - see page 16CutGloss

G Mop High Cut FoamGMC618 (6” / 150mm)GMC818 (8” / 200mm) - see page 16CutGloss

Profi le Vector Liquid CompoundPRV101 (1 ltr) - see page 10CutGloss

Profi le Advanced Liquid CompoundPRA106 (1 US gallon) - see page 8CutGloss

FAR QUICKER REFERENCE GUIDE FAR QUICKER REFERENCE GUIDEPROFILE COMPOUNDS & WAXES G MOP APPLICATORS

Profi le Finish Liquid CompoundPRF101 (1 ltr)PRF106 (1 US gallon) - see page 11CutGloss

Profi le Polymer UV Wax(designed for machine application)PRW101 (1 ltr) - see page 12CutGloss

Profi le UV Wax(designed for hand application)PRU101 (1 ltr) - see page 13CutGloss

Profi le Premium Liquid CompoundPRL101 (1 ltr)PRL106 (1 US gallon) - see page 9CutGloss

Cut and gloss levels may be aff ected by the surface type and which compound or wax is used.

Cut and gloss levels may be aff ected by the surface type and which applicator is used

5 6

G Mop Flexible Back Platefor 8” Pads - see page 17GMB814 (14mm thread)GMB858 (5/8” thread)GMB816 (16mm thread)

G Mop Flexible Back Platefor 6” Pads - see page 17GMB146 (14mm thread)GMB586 (5/8” thread)GMB166 (16mm thread)

PROFILE

& WAXESCOMPOUNDS

7 8

Farécla’s Stage 1: CUT and Stage 2: FINISH compounds are water-based and use diminishing abrasives, instead of fi llers, to permanently remove scratches and provide a fl awless fi nish quickly.

NOTESPERMANENT RESULTS

• Ideal for high volume polishing of clearcoats, direct gloss and PU lacquers• Removes P1500 or fi ner from all modern paint systems• A long lasting, powerful cutting action• No fi llers, no silicones, no die-back, no reworks• Clean in use, no dusting or splatter. Exceptionally easy and quick to wipe off

Sizes1 US gallon

Qty2

CodesPRA106

FAST RESULTS

POWERFUL CUT

FOR ALL PAINT TYPES

PROFILE ADVANCEDLIQUID COMPOUND

Finish sanding up to P1500 or fi ner

Attach a G Mop High Cut Foam to a polisher GMC618 (6” / 150mm)GMC818 (8” / 200mm)

Spur new pads.Prime new pads

with product.Apply a small amount

of product to thesurface or pad.

Compound at900 - 1300rpm

Wipe away residue with a clean, dry G Plus

Finishing ClothFC-3 (3 x cloths)

FC-100 (100 x cloths)

9 10

RESTORES OXIDISED GEL COATS

• High quality abrasive, stays wet for a long time• Engineered for production gel coats and weathered gel coats• Superb value - quicker application and much less product required versus leading brands• No clogging, extended wool pad life, and clean in use

Sizes1 ltr1 US gallon

Qty62

CodesPRL101PRL106

NO HAZE, NO DIE-BACK

GREAT ON DARK COLOURS

PROFILE PREMIUMLIQUID COMPOUND




CLEAN IN USE

• Water-based, cutting compound• Removes P1500 or fi ner sanding marks from acrylics, polyester coatings and gel coats• For dry use only• Good lubrication prevents excessive friction

Sizes1 ltr

Qty6

CodesPRV101

PERMANENT - NO FILLERS - NO REWORKS

SAFE - SILICONE-FREE - ECONOMY PRODUCT

PROFILE VECTORLIQUID COMPOUND



Attach a G Mop LambsWool Pad to a polisher GML301 (3” / 75mm)GML601 (6” / 150mm)GML801 (8” / 200mm)

Attach a G Mop LambsWool Pad to a polisher GML301 (3” / 75mm)GML601 (6” / 150mm)GML801 (8” / 200mm)







Spread the product on the surface and

compound at1500 - 1800rpm

Spread the product on the surface and

compound at1500 - 1800rpm




11 12

NOWWITH UV

INHIBITORS

Sizes1 ltr

Qty6

CodesPRW101

SPRAYABLE

RAPID RESULTS ON LARGE SURFACES

EASY TO APPLY AND REMOVE BY MACHINE

PROFILE POLYMER UV WAXLIQUID PROTECTION

Allow to dry to a haze Wipe with a clean, dry G Plus Finishing Cloth

FC-3 (3 x cloths)FC-100 (100 x cloths)

*To add some cut, use a G Mop Lambs Wool Pad GML801.

WAIT

GLOSS RESTORER

• Fine compound designed to remove light swirl marks and holograms from high quality painted, lacquered and gel coat surfaces• Restores dull surfaces and enhances colour• Gives a high shine fi nish with good depth and clarity• For a higher cut, use with a G Mop Lambs Wool Pad

Sizes1 ltr1 US gallon

Qty62

CodesPRF101PRF106

SMOOTH, HIGH SHINE FINISH

REMOVES LIGHT DEFECTS

PROFILE FINISHLIQUID COMPOUND

Attach a G MopFinishing Foam*

to a polisherGMF301 (3” / 75mm) GMF601 (6” / 150mm) GMF801 (8” / 200mm)

Attach a G MopFinishing Foam*

to a polisherGMF301 (3” / 75mm) GMF601 (6” / 150mm) GMF801 (8” / 200mm)

Prime new padswith product.

Apply a small amount of product to thesurface or pad.

Prime new padswith product.

Apply a small amount of product to thesurface or pad.

Compound slowlyat 1000rpm

Compound slowlyat 1000 - 1500rpm

Slowly increase speed to 2000rpm.

DO NOT ALLOWTO DRY!




1000rpm 2000rpm

*For a higher cut, use a G Mop Lambs Wool Pad GML801.

• Designed to be applied by machine• Delivers an even, high gloss fi nish with excellent clarity• Quick on large surfaces such as on boats, caravans, trucks and planes• Highly water resistant, providing a durable, protective coating• Protects against UV rays• Can also be applied by hand

13 14

LIQUID PROTECTION

• Fast liquid spray application for a quick clean and that ‘just waxed’ look• Removes surface contaminants including compound residue, light dirt, dust and fi ngerprints• A perfect complement to Profi le Polymer Wax or Profi le UV Wax Liquid Protection when used in combination, aiding protection• Suitable for many surfaces including paintwork, rubber, vinyl, plastic, glass and chrome

Sizes1 US gallon

Qty2

CodesPRD106

QUICK CLEAN - REMOVE FINGERPRINTS AND DUST

VERSATILE

ENHANCES WOOD GLOSS

PROFILE RAPID DETAILERCLEANER & WAX

Shake and fi ll a G Plus Water Spray Bottle

Spray a small amount where needed

Wipe with a clean, dry G Plus Finishing Cloth


G Plus Water Spray Bottle WSB (600ml)

Profi le Rapid Detailer label PRM1146 for WSB

WAIT

HARD-WEARING PROTECTION

• Designed to be applied by hand• Carnauba based wax incorporating special UV inhibitors, protects gel coats and paints exposed to external weathering for up to 3 months• Gives an excellent high gloss fi nish to surfaces• Does not dry out in use in direct sunlight so it can be applied outside• Long-lasting protection

Sizes1 ltr

Qty6

CodesPRU101

WEATHERPROOF

HIGH GLOSS FINISH BY HAND

PROFILE UV WAX

Apply a small amount to the surface or a

G Plus Finishing Cloth*FC-3 (3 x cloths)


Rub on the surface in circular motions

Allow to dry to a haze Wipe with a clean, dry G Plus Finishing Cloth


*Can be applied by machine using a G Mop Finishing Foam GMF801 at low speed (700 - 900rpm).

• High cut and rapid, superb gloss• Superb handling and fl exibility, glides easily over surface contours• Open cell structure for ‘dry use’ compounds• Excellent durability

G MOP HIGH CUTFOAM

GMC618 (6” / 150mm)GMC818 (8” / 200mm)G MOP

APPLICATORSG PLUSANCILLARIES

15 16

Clean applicator pads thoroughly before use to avoid contamination and prevent dried product causing damage to your surface.

TIPAPPLICATOR MAINTENANCE

• Medium cut• Finer fi nish than Twisted Wool Pads

G MOP LAMBS WOOLPAD

GML301 (3” / 75mm)GML601 (6” / 150mm)GML801 (8” / 200mm)

• Soft , open cell structure• Light cut• High gloss fi nish

G MOP FINISHINGFOAM

GMF301 (3” / 75mm)GMF601 (6” / 150mm)GMF801 (8” / 200mm)

GMA014 (14mm thread)GMA058 (5/8” thread)

GMA016 (16mm thread)

• Screw on and off design • For use with double sided pads

G MOP BOLT ADAPTORFOR DOUBLE SIDED PADS

GMB814 (14mm thread)GMB858 (5/8” thread)

GMB816 (16mm thread)

• Flexible for easy use on difficult areas • Ideal for the G Mop High Cut and Lambs Wool Pads

G MOP FLEXIBLEBACK PLATE FOR 8” PADS

GMB146 (14mm thread)GMB586 (5/8” thread)

GMB166 (16mm thread)

• Flexible for easy use on difficult areas • Ideal for the G Mop High Cut and Lambs Wool Pads

G MOP FLEXIBLEBACK PLATE FOR 6” PADS

• Low-lint• Microfibre cloth • Can be washed up to 100 times

G PLUS FINISHING CLOTHEDGELESS MICROFIBRE


AP-5YW (yellow - 5mm nib)

• Non-staining (bodywork and glass) pen• Does not wash off in the rain, but does wipe off with a clean, damp cloth

G PLUS AUTOPENFOR JOB IDENTIFICATION

WSB (600ml)

• Gives an even dispersal of water• Ensures a supply of clean water, minimises contamination

G PLUS WATERSPRAY BOTTLE

• For quick and easy cleaning of pads when spun on a machine • Avoids residue, dried compound and other contaminants imparing your next job• Unclogs foam cells to ensure no drop in cut or gloss

G PLUS SPURRING BRUSHFOR PAD CLEANING 1090005 (for all pads)

17 18

WOOD

19 20

SURFACEPROCESSES

Finish sanding to

P1500or fi ner.

This grade may change if using an alternative

compound or applicatorthan used in this process.

SAND Stage 1: CUT Stage 2: FINISH (optional)

Profi le AdvancedLiquid Compound

PRA106 (1 US gallon)

G Mop Finishing FoamGMF301 (3” / 75mm) GMF601 (6” / 150mm) GMF801 (8” / 200mm)

Profi le AdvancedLiquid Compound

PRA106 (1 US gallon)

G Mop 8” High Cut FoamGMC818

G Mop Flexible Back Plate for 8” PadsGMB814 (14mm thread)GMB858 (5/8” thread)

PAINTED & LACQUEREDWOOD SURFACES

IDEAL FOR HIGH VOLUME JOBS

THE RESULTFlawless, high gloss, defect-free surface.

PAINTED & LACQUERED DETAILEDWOOD SURFACES SURFACE FINISHING

21 22

IDEAL FOR FOCUSED, LOW VOLUME JOBS

THE RESULT

THE RESULTFlawless, high gloss, defect-free surface.

Ideal for compounding into tightareas for a far more detailed fi nish.

Finish sanding to

P1500or fi ner.

This grade may change if using an alternative

compound or applicatorthan used in this process.

SAND Stage 1: CUT Stage 2: FINISH (optional)

Profi le FinishLiquid Compound

PRF101 (1 ltr)PRF106 (1 US gallon)

G Mop Finishing FoamGMF301 (3” / 75mm) GMF601 (6” / 150mm) GMF801 (8” / 200mm)

Profi le Premium Liquid Compound*PRL101 (1 ltr)

PRL106 (1 US gallon)

G Mop High Cut FoamGMC618 (6” / 150mm)GMC818 (8” / 200mm)

G Mop Flexible Back Plate for 8” PadsGMB814 (14mm thread)GMB858 (5/8” thread)

FG-MINIPOL

• Cordless polishing machine (for 3” / 75mm pads)• Lithium-ion battery - life up to 45 minutes• ideal for polishing small areas• Includes charging unit, spare battery and a back plate for 3” / 75mm pads*Ancillaries available

AC DELCOMINI POLISHER

See pages 16 to 17

USE WITHG MOP 3” APPLICATORS

*As an alternative to Profi le Premium Liquid, use Profi le Vector PRV101 (1 ltr).

LIT1

987

(V2

11-2

017)

Farécla Products Limited,Broadmeads, Ware,

Hertfordshire, SG12 9HSEngland

Tel: +44 (0) 1920 465041Fax: +44 (0) 1920 466557

E-Mail: [email protected]

www.farecla.com

fareclaproductsltd

surface finishing specialists...surface finishing solutions to automotive bodyshops, valeters, boat...

Documents