surface door closers brochure v2 - tell manufacturing inc.tellmfg.com/finishing touches...

TELL MANUFACTURING, INC.CORPORATE OFFICE: 18 RICHARD DRIVE b LITITZ, PA 17543 b TOLL FREE 800.433.4047 b PHONE 717.625.2990 b FAX 717.625.7095OTHER LOCATIONS: BIRMINGHAM, ALABAMA b MIRA LOMA, CALIFORNIA b ELKHART, INDIANA b HOUSTON & DALLAS, TEXASWEBSITE: WWW.TELLMFG.COM

Professional Grade Residential LocksetsTELL MANUFACTURING, INC.CORPORATE OFFICE: 18 RICHARD DRIVE b LITITZ, PA 17543 b TOLL FREE 800.433.4047 b PHONE 717.625.2990 b FAX 717.625.7095OTHER LOCATIONS: BIRMINGHAM, ALABAMA b MIRA LOMA, CALIFORNIA b ELKHART, INDIANA b HOUSTON & DALLAS, TEXAS

WEBSITE: WWW.TELLMFG.COM

Tell ManufacTuring, inc.

18 Richard Drive k Lititz, PA 17543 k TOLL 800-433-4047 k PHONE 717-625-2990 k FAX 717-625-7095

202 Distribution Drive, Homewood, AL 35209 k Toll 800-433-4047 k Phone 205-942-8409 k Fax 205-942-8410

12481 Riverside Drive, #A, Mira Loma, California 91752 k Toll 800-433-4047 k Fax 951-360-6691

2936 Lillian Drive, Elkhart, Indiana 46514 k Toll 800-433-4047 k Phone 574-970-1070 k Fax 574-970-1066

1018 Avenue M, Grand Prairie, Texas 75050 k Toll 800-433-4047 k Phone 972-660-3000 k Fax 972-660-3001

2505 W 11th Street, Houston, Texas 77008 k Toll 800-433-4047 k Phone 713-956-2725 k Fax 713-683-8695

Website www.tellmfg.com

TerMs & condiTions of sale

MiniMuM order One (1) each

crediT TerMs 1% 10 Ne t 30

laTe fee 1 1/2% per month will be applied to pas t invoices

freighT

Our F OB point is Lititz, PA, or E lkhart, IN, or Hous ton, TX, or Dallas , TX, or Mira Loma, CA or B irmingham, AL.The ship location of your merchandis e is at our company’s dis cre tion. All fre ight charges are prepaid and will beadded to your invoice . The cons ignee pays C .O.D. fre ight charges . If your total invoice exceeds $1,500 NE T,then the full s urface fre ight (UP S or truck) within continental U.S .A. is deductible provided the invoice is paidwithin te rms . Airfre ight and other s pecial s hipments are not deductible . All fre ight allowance methods are at thedis cre tion of Te ll Manufacturing, Inc. We are dis continuing our policy of offe ring free shipping for cas e quantitie s .This policy applie s to hardware s ale s only.

reTurn goods

Cus tomer mus t advis e Te ll Manufacturing, Inc. of merchandis e to be re turned at which time a R GA number willbe is sued. Goods re turned without a R GA number will not be accepted. All re turned merchandis e mus t be ins aleable condition, free of all markings , and in original cartons . R e turns are subject to a re s tocking fee .

liMiTed WarranTy

Te ll Manufacturing, Inc. warrants that its products are free from de fects in workmanship and material undernormal us e and s ervice . This warranty does not cover de fects or damage which occur from impropermaintenance , improper s torage , improper ins tallation, s hipping and handling, ordinary wear and tear, misus e ,abus e , accident, unauthorized s ervice , work done by others , and cons equential damages . Te ll ManufacturingInc’s . only liability, in tort or contract, whe ther under this warranty or otherwis e , is limited to providing repair orreplacement of any product or component part be lieved to be de fective as covered by this warranty. Claimsshould be s ent to Te ll Manufacturing Inc., 18 R ichard Drive , Lititz, PA 17543, and should include claimant’sname and addres s , identification of the product, invoice number and date , and a brie f des cription of the de fect.Upon rece ipt of s uch notice , a Te ll Manufacturing repres entative will contact claimant as to where to s hip suchproduct or component part, s hipping charges prepaid, for examination and, in the event s uch examinationreveals a de fect covered by this warranty, the product will be repaired or replaced. This warranty is in lieu of allother expres s warrantie s . To the extent permitted by law, all implied warrantie s are limited to the duration of theproduct category’s warranty.

FINISHING TOUCHES® TERMS & CONDITIONS

PAGE 16 i

FINISHING TOUCHES®DOOR TRIM

RESIDENTIAL DOOR TRIMb FITS ANY DOORb BUILT TO LASTb LIFETIME MECHANICAL WARRANTY

SOLID DOOR

STOPDT100157,

US15/SATIN NICKEL

DT100165,US3/BRIGHT BRASSDT100164, US10B/OIL RUBBED BRONZE

HINGE PINHINGE PIN STOP

DT100156, US15/SATIN NICKEL

DT100162, US3/BRIGHT BRASSDT100163, US10B/OIL RUBBED BRONZE

DT100158,US15/SATIN NICKEL

DT100167,US3/BRIGHT BRASS

DT100166,US10B/OIL RUBBED

BRONZE

POCKET DOOR LOCK /PRIVACY FUNCTION



* 4 SCREWS, 1 PIN PACK INCLUDED

POCKET DOOR LOCK /PASSAGE FUNCTION



* 4 SCREWS, 1 PIN PACK INCLUDED

FLOOR STOPSSPRING DOOR STOP


Professional Grade Residential LocksetsTELL MANUFACTURING, INC.CORPORATE OFFICE: 18 RICHARD DRIVE b LITITZ, PA 17543 b TOLL FREE 800.433.4047 b PHONE 717.625.2990 b FAX 717.625.7095OTHER LOCATIONS: HOUSTON & DALLAS, TEXAS b ELKHART, INDIANA b MIRA LOMA, CALIFORNIA b BIRMINGHAM, ALABAMAWEBSITE: WWW.TELLMFG.COM

Professional Grade Residential Locksets

PAGE 15 i

FINISHING TOUCHES®HINGES

RESIDENTIAL HINGES a FITS ANY DOOR b BUILT TO LASTb LIFETIME MECHANICAL WARRANTY

1/4” RADIUS(SHOWN ABOVE)

ALSO AVAILABLE IN 5/8”US15/SATIN NICKEL

5/8” RADIUS(SHOWN ABOVE)

ALSO AVAILABLE IN 1/4”US10B/OIL RUBBED BRONZE

5/8” RADIUS

(SHOWN ABOVE)ALSO AVAILABLE IN 1/4”

US3/BRIGHT BRASS

STANDARD HINGE FEATURES:PERFORMANCE Complies with ANSI A156.1, 1999 (plain bearing)

HINGE 3‐1/2" x 3‐1/2" plain bearing (five knuckle) reversible radius corner 5/8” or 1/4”.

MATERIAL Steel with steel pin (.085 gauge steel)

SCREWS Furnished with 12 #12 wood screws

FINISHES US3 (Bright Brass), US15 (Satin Nickel), US10B (Oil Rubbed Bronze).

WARRANTY 1 year

HINGEFINISHES

US3 = Bright Brass

US15 = Satin Nickel

US10B = Oil Rubbed Bronze

STOCKING PROGRAM = US3, US15, US10B

TELL MANUFACTURING, INC.CORPORATE OFFICE: 18 RICHARD DRIVE b LITITZ, PA 17543 b TOLL FREE 800.433.4047 b PHONE 717.625.2990 b FAX 717.625.7095OTHER LOCATIONS: BIRMINGHAM, ALABAMA b MIRA LOMA, CALIFORNIA b ELKHART, INDIANA b HOUSTON & DALLAS, TEXAS




PAGE 14 i

FINISHING TOUCHES® KNOBS

Founded upon a philos ophy

of providing quality profe s s ional grade locks e ts at

competitive price s , FINISHING TOUCHES®

locks e ts feature all me talcomponents , de liver outs tanding

performance , and are quick and eas y to ins tall.

PROFESSIONAL GRADE LOCKSETS a FITS ANY DOOR b BUILT TO LASTb LIFETIME MECHANICAL WARRANTY

EMPIRE (EMP)US15/SATIN NICKEL

PARKLAND (PKD)US3/BRIGHT BRASS

QUALITY

100% Brass

EASY TO

INSTALL3-Pieces

ADJUSTABLE LATCH2-3/8" to 2-3/4" (patented)

ONE PIECE KNOB DESIGNS

Superior Quality and Appearance

KEYABLE

TO

SCHLAGE

OR

KWIKSET

KNOB FINISHESUS3 = Bright Brass

US15= Satin Nickel

US10B= Oil Rubbed Bronze

US32D= Satin Stainless Steel


KNOB DESIGNSParkland / PKD (Stocked item)

Empire / EMP

PAGE 1 i

FINISHING TOUCHES®COMBO PACKS

ENTRANCE3581

ANSI No. F81

Function Name & No. Outside Inside Function Description

Latchbolt operated by knob from either side

Outside knob locked by push button from inside

Unlocked by key from outside or rotating inside knob

When outside knob locked by push and turn button

from inside, key from outside or rotating inside knob retracts latch, does not unlock outside knob

SINGLECYLINDER3051

ANSI No. F75

Deadbolt operated by key outside, thumb turn inside

COMBO PACK FUNCTIONS:

COMBO PACK HOW TO ORDER CHART:





PAGE 13 i PAGE 2 i


ENTRANCE3581

ANSI No. F81

PASSAGEHALL/CLOSET3575

ANSI No. F75

PRIVACYBEDROOM/BATHROOM3576

ANSI No. F76



Outside knob locked by turn button from inside

Unlocked by key from outside or rotating inside knob

When outside knob locked by push and turn button

from inside, key from outside or rotating inside knob retracts latch, does not unlock outside knob

Latchbolt operated by knob from either side at all

times


Outside knob locked by push button on inside

Unlocked by emergency release on outside,

rotating inside knob

SINGLE DUMMY3501

Pull knob one side

No mechanical operation

DOOR RANGE 1‐3/8" to 1‐3/4"BACKSET Adjustable 2‐3/8" or 2‐3/4" LATCH 1" x 2‐1/4", square corner and radius faceplate, 7/8" housing diameter, 1/2" throwSTRIKE 1‐5/8" x 2‐1/4", square corner, full lip

KEYWAY CYLINDER Schlage (SCC) keyway, Kwikset (KW) keyway availableKEYS Two nickel silver cut keys per lock

KNOB FUNCTIONS:

KNOB FEATURES:

FINISHING TOUCHES®COMBO PACKS

SINGLE CYLINDER DEADBOLTUS3/BRIGHT BRASS

DOOR RANGE 1‐3/8" to 1‐3/4"

BACKSET Adjustable 2‐3/8" or 2‐3/4"

LATCH 1" x 2‐1/4", square corner and radius faceplate, 7/8" housing diameter, 1/2" throw

STRIKE 1‐5/8" x 2‐1/4", square corner, full lip

KEYWAY CYLINDER Schlage (SCC) keyway

KEYS Two nickel silver cut keys per lock

KNOB FEATURES:

DOOR RANGE 1‐3/8" to 1‐3/4"BACKSET Adjustable 2‐3/8" or 2‐3/4"

DEADBOLT 1" x 2‐1/4", square corner faceplate, 7/8" housing diameter, 1" throw with anti‐saw

roller bar for added securitySTRIKE 1‐1/8" x 2‐3/4", square corner

KEYWAY CYLINDER Schlage (SCC) keyway KEYS Two nickel silver cut keys per lock

DEADBOLT FEATURES:



COMBO PACKFINISHES

US3 = Bright Brass

STOCKING PROGRAM = US3





PAGE 12 iPAGE 3 i

FINISHING TOUCHES®LEVERSPROFESSIONAL GRADE LOCKSETS a FITS ANY DOOR b BUILT TO LAST

b LIFETIME MECHANICAL WARRANTY

NIAGRA (NGA)US10B/OIL RUBBED BRONZE

CORTLAND (CTL)US26D/SATIN CHROME

Founded upon a philos ophy of providing quality

profe s s ional grade locks e ts atcompetitive price s ,

FINISHING TOUCHES®

locks e ts feature all me tal components ,de liver outs tanding performance , and

are quick and eas y to ins tall.

LEVER FINISHESCortland Lever:

US3 = Bright Brass

US26D = Satin Chrome

Niagra Lever:

US3 = Bright Brass

US15 = Satin Nickel


LEVER DESIGNSNiagra / NGA (Box Pack & Clamshell /

Stocked Item)

Cortland / CTL (Box Pack Only)

HANDING NOTE:

Niagra & Cortland passage, privacy and

entry functions are designed for left and

right hand doors, but handing is required

for handlesets and dummy levers.STOCKING PROGRAM =

US3, US15, US10B

FINISHING TOUCHES®HANDLESETS

HOW TO ORDER CHART





PAGE 11 i PAGE 4 i

FINISHING TOUCHES®HANDLESETS

SINGLE CYLINDER3290

Keyed 1 Side


Deadbolt operated by key outside, thumb

turn inside. Latchbolt retracted by

outside thumbpiece.

HANDLESET FEATURES:

HANDLESET FUNCTION:

HANDLESET Solid forged brassDOOR RANGE 1‐3/8" to 1‐3/4"

BACKSET Adjustable 2‐3/8" or 2‐3/4"DEADBOLT 1" x 2‐1/4" , square corner faceplate,

solid brass cylinder plug and housing,

1" throw with hardened steel anti‐theft

roller bar to prevent sawingSTRIKE 1‐5/8" x 2‐1/4", square corner

KEYWAY CYLINDER Schlage (SCC) keyway,

Kwikset (KW) keyway availableKEYS Two nickel silver cut keys per lock

FINISHING TOUCHES®LEVERSDOOR RANGE 1‐3/8" to 1‐3/4"

BACKSET Adjustable 2‐3/8" or 2‐3/4"

LATCH 1" x 2‐1/4", square corner and radius faceplate, 7/8" housing diameter, 1/2" throw

STRIKE 1‐5/8" x 2‐1/4", square corner, full lip

KEYWAY CYLINDER Schlage (SCC) keyway, Kwikset (KW) keyway available


CERTIFICATION Meets ANSI 156.2, series 4000, grade 3

LEVER FEATURES:

LEVER FUNCTIONS:

ENTRANCE3581

ANSI No. F81

PASSAGEHALL/CLOSET3575

ANSI No. F75

PRIVACYBEDROOM/BATHROOM3576

ANSI No. F76


Latchbolt operated by lever from either side

Outside lever locked by turn button from inside

Unlocked by key from outside or rotating inside lever

When outside lever locked by push and turn button

from inside, key from outside or rotating inside

lever retracts latch, does not unlock outside lever


at all times


Outside lever locked by turn button on inside

Unlocked by emergency release on outside

SINGLE DUMMY3501

Pull lever one side

No mechanical operation


Professional Grade Residential LocksetsTELL MANUFACTURING, INC.CORPORATE OFFICE: 18 RICHARD DRIVE b LITITZ, PA 17543 b TOLL FREE 800.433.4047 b PHONE 717.625.2990 b FAX 717.625.7095OTHER LOCATIONS: BIRMINGHAM, ALABAMA b MIRA LOMA, CALIFORNIA b ELKHART, INDIANA b HOUSTON & DALLAS, TEXAS

WEBSITE: WWW.TELLMFG.COM PAGE 10 iPAGE 5 i

FINISHING TOUCHES® KNOBS & LEVERSACCESSORIES

CL100506

Drive-in latch, non-dead latching, used where face plate not required. 1/2” throw. Backset adjustable 2-3/8” to 2-3/4”, 1” diameter.

CL100505

Drive-in latch, dead latching, used where face plate not required. 1/2” throw. Backset adjustable 2-3/8” to 2-3/4”, 1” diameter.

CL100504US32D

U.L. listed latch bolt with non-deadlatching function. 1/2” throw. Backset adjustable 2-3/8” to 2-3/4”. Fits 160 door prep (2-1/8” hole, 7/8” latch hole) or fits 161 door prep (2-1/8” hole, 1” latch hole).

CL100503 US32D

U.L. listed latch bolt with deadlatching function. 1/2” throw. Backset adjustable 2-3/8” to 2-3/4”. Fits 160 door prep (2-1/8” hole, 7/8” latch hole) or fits 161 door prep (2-1/8” hole, 1” latch hole).

CL100735 — 6 Way Latch, Guarded US26DCL100674 — 6 Way Latch, Unguarded US26D

6 way latch, dead latching and non-dead latching with drive in, square corner and radius face plates. Backset adjustable 2-3/8” to 2-3/4”.

CL100186 — ASA Strike US32DCL100187 — ASA Strike US3CL100415 — ASA Strike US10B

For metal frames. (1-1/4” x 4-7/8” x 3/32”).

CL100191 — T Strike US32DCL100189 — T Strike US3CL100420 — T Strike US10B

For wood frames. (1-1/8” x 2-3/4” x 3/32”).

CL100190 — F Strike US32DCL100192 — F Strike US3CL100581 — F Strike US10B

For wood residential applications. (1-5/8” x 2-1/4” x 3/32”).

FINISHES: US32D=Satin Stainless Steel, US3=Bright Brass, US26D=Satin Chrome, US10B=Oil Rubbed Bronze

FINISHING TOUCHES® HANDLESETS

Founded upon a philos ophy of providing quality

profe s s ional grade locks e ts atcompetitive price s ,

FINISHING TOUCHES®

locks e ts feature all me talcomponents , de liver outs tanding

performance , and are quick and

eas y to ins tall.


WESTLAND (WTD)US15/SATIN NICKEL

NIAGRA (NGA)US3/BRIGHT BRASS

NIAGRA (NGA)US15/SATIN NICKEL

inTerior opTions:


WESTLAND (WTD)US3/BRIGHT BRASS

HANDLESETFINISHES

US3 = Bright Brass

US15 = Satin Nickel






WEBSITE: WWW.TELLMFG.COM PAGE 6 iPAGE 9 i

FINISHING TOUCHES®DEADBOLTS

HOW TO ORDER CHART

FINISHING TOUCHES®LEVERSHOW TO ORDER CHART


HOW TO ORDER CHART





PAGE 8 iPAGE 7 i

FINISHING TOUCHES®DEADBOLTSPROFESSIONAL GRADE LOCKSETS a FITS ANY DOOR b BUILT TO LAST

b LIFETIME MECHANICAL WARRANTY

Founded upon a philos ophy

of providing quality profe s s ional grade locks e ts at

competitive price s ,FINISHINGTOUCHES®

locks e ts feature all me talcomponents , de liver

outs tanding performance , and are quickand eas y to ins tall.

FINISHING TOUCHES® deadbolts are available in a single cylinder and a double cylinder function.

Double cylinder deadbolts provide additional security for doors with glass panels.

SINGLE CYLINDERUS3/BRIGHT BRASS

DOUBLE CYLINDERUS15/SATIN NICKEL

DEADBOLTFINISHES

US3 = Bright Brass

US15 = Satin Nickel


US32D = Satin Stainless Steel


FINISHING TOUCHES®DEADBOLTS

DOOR RANGE 1‐3/8" to 1‐3/4"

BACKSET Adjustable 2‐3/8" or 2‐3/4". 2‐1/4” x 1” faceplate

standard. Drive‐In optional.

DEADBOLT 1" x 2‐1/4", square corner faceplate,

7/8" housing diameter, 1" throw with anti‐saw

roller bar for added security

STRIKE 1" x 2‐1/4", square corner

KEYWAY CYLINDER Schlage (SCC) keyway,

Kwikset (KW) keyway available


DEADBOLT FEATURES:

DEADBOLT FUNCTIONS:

DOUBLE CYLINDER3041

ANSI No. E0413

SINGLECYLINDER3051

ANSI No. F75


Deadbolt operated by key outside, key inside

Deadbolt operated by key outside, thumb turn inside

CL100177Adjustable drive-in latch.

DEADBOLT ACCESSORY:

surface door closers brochure v2 - tell manufacturing inc.tellmfg.com/finishing touches...

Documents