supported devices

AirWave 8.0Supported Infrastructure Devices

AirWave provides a range of features to manage network infrastructure devices fromArubaNetworks and othervendors. This document describes the supported product families, software versions, and feature set for thefollowing product sets:

l "Wireless LAN APs and Controllers" on page 1

n "ArubaOS" on page 1

n "Cisco® Devices" on page 2

n "Motorola® Devices" on page 4

n "HP® Devices" on page 5

n Juniper® Devices

n Meru® Devices

l "Wired Ethernet Switches" on page 6

n "ArubaMobility Access Switches" on page 6

n "Other Switches" on page 6

l "Other Devices with Monitoring Support" on page 7

Wireless LAN APs and Controllers

ArubaOSAirWave supports all Aruba controllers andmost access points that are running ArubaOS 6.4.0.x and all priorversions that have not reached the End of Support milestone. The AP-80M series of access points is notsupported by AirWave.

Refer to http://www.arubanetworks.com/support-services/end-of-life-products for the complete list of end-of-life products.

FIPSControllers running ArubaOS 6.0.x through 6.4.x FIPS and all prior versions that have not reached the End ofSupport milestone are supported by this version of AirWave, including themanagement of global configurationprofiles and software upgrades.

InstantAruba Instant IAPs running software versions 6.3.1.0-4.0.0.x and prior are also supported, including themanagement of configuration settings and software upgrades. The following table showswhen each new versionof Instant was initially supported in AirWave.

InstantVersion

Support For TemplateConfiguration

Support for IGCConfiguration

Instant 4.1 AirWave 8.0 (Future AirWave release)

Instant 4.0 AirWave 8.0 and AirWave 7.7.10 AirWave 7.7.8

Instant 3.4 AirWave 7.7.3 AirWave 7.7.8

Table 1: Instant Support in AirWave

AirWave 8.0 | Supported Infrastructure Devices 0511089-12 | March 2015

InstantVersion

Support For TemplateConfiguration

Support for IGCConfiguration



Instant 3.1 AirWave 7.5.6 N/A

Instant 3.0 AirWave 7.5 N/A

Table 1: Instant Support in AirWave (Continued)

AirMeshAruba AirMesh outdoor products runningMeshOS 4.2 are supported formonitoring and for software upgrades.

Aruba Mobility Controller 651ArubaMobility Controller 651 running 6.2.0 and prior versions are supported.

Cisco® Devices

Autonomous APs running IOSThe following IOS AP product families are supported formonitoring, configuration, and software upgrades.

Thefirmware versions listed in the table below represents the latest firmware version verified as fullysupportedby AirWave 8.0. Informal testing shows that AirWave supports devices runningmore recent versionsof firmware, but full support for these later versions is not guaranteed.

Firmware Version Model Type

Validated up to IOS 12.3(11)JA

l 350 seriesl 1110 seriesl 1130 seriesl 1140 series

Validated up to IOS 12.4(21a)JA1

l 350 seriesl 1040 seriesl 1100 seriesl 1130 seriesl 1140 seriesl 1200 seriesl 1210 seriesl 1230 seriesl 1240 seriesl 1250 seriesl 1260 seriesl 1300/1400 series bridgesl 871W (excluding software upgrade

support)l 881 seriesl 881GWAP seriesl 891 series

Table 2: Supported Firmware for autonomous APs running IOS

2 AirWave 8.0 | Supported Infrastructure Devices


Validated up to IOS 12.4(23c)JA2 1941 series AP

Validated up to IOS 12.4(25d)JA2 801 AP

Validated up to IOS 15.(22)JB 801 AP

Validated up to IOS 15.0(1)M7l 881W seriesl 891W series

Validated up to IOS 15.1(4)M3 881GW series

Validated up to IOS 15.2(3)T 1941W series

Validated up to IOS 15.3(2)T2l 880 seriesl 890 seriesl 1900 series

Validated up to IOS10.2.111.0 (IOS: 15.3(3)JN3)

l 1700l 2700l 702W

Table 2: Supported Firmware for autonomous APs running IOS (Continued)

Support is also available for the following product:

l 860 series

Wireless LAN Controllers and Access PointsThe following controllers and thin APs are supported formonitoring, configuration, and software upgrades.

Firmware Version Device Type

Validated up to software version 7.6.110.0 (Bootloader:7.0.116.0)

l Standalone 2500 SeriesController


l 7500 Flex Controllerl 1040 Series APl 1130 Series APl 1140 Series APl 1200 Series APl 1550 Series APl 1600 Series APl 1700 Series APl 2600 Series APl 2700 Series APl 3500 Series APl 3600 Series APl 3700 Series AP

Validated up to software version 7.0.235.0 (Bootloader:7.0.235.0)



Table 3: Wireless LAN Controllers and Access Points

AirWave 8.0 | Supported Infrastructure Devices 3

Firmware Version Device Type

Validated up to software version 3.2.0 Standalone 5760 Controller

Validated up to software version 03.06.01El 3650l 3850

Validated up to software version 7.4.121.0 8510

Table 3: Wireless LAN Controllers and Access Points (Continued)

Support is not available for the following products:

l Mobility Services Engine

l 500 series APs

Support for legacy Cisco devices is described at the end of the document.

Motorola® DevicesThe followingMotorola (formerly Symbol) controllers and autonomous APs are supported formonitoring,configuration, and software upgrades up to software version 5.4.20-30R.


Device Type Model Type

Controllers

l RFS4000 (validated up to 5.4.2.0-30R)l RFS6000l RFS7000l WS2000 (validated up to 2.4.5)l WS5100 (validated up to 3.3.4)l Wing5 RFS controllers

Autonomous APs

l 5131l 5181l 7131l 6532*l 6522*l 6521*l 621l 622l 6532l 6521l 6522l 7161

* These AP and controller models may require adjustments to the AirWaveSNMP timeouts to compensate for known SNMP issues on these devices.

Table 4: Motorola supported firmware and devices

Support for legacy Motorola/Symbol devices is described at the end of the document.


HP® DevicesThe following HP devices are supported formonitoring and software upgrades. These devices are availablewithin the VisualRF product catalog and can be selected when setting up device-specific triggers and alerts. Inaddition, these devices can be set up as trap receivers, and the SNMP traps can be seen on the System > Syslog& Traps page.

InVisualRF, the utilization value for HP devices will be 0 because AirWavedoes not get utilization values forthesedevices.


Validated up to software version 5.7.2.0

l HPMSM430l HPMSM460l HP MSM466l HP MSM720

(controller)

Validated up to software version 5.5.3.0-01-10326 HP MSM710 (controller)

Table 5: HP supported firmware and devices

Support for additional HP devices is described at the end of the document.

Juniper® DevicesThe following Juniper products are supported for controller and AP discovery andmonitoring.


9.1.0.6.0

l WLA321l WLA322l WLA522l WLA532l WLA632l WLC100l WLC2l WLC2800l WLC8l WLC800l WLC880l WLC JunosV

Table 6: Supported Firmware for Wireless LAN Controllers and Access Points


Meru® DevicesThe followingMeru controllers and APs are now supported in VisualRF.


6.1.1-25

l AP302l AP320il AP332il AP433il AP433isl AP822el AP822il AP832el AP832il RS4000l MC1550l MC3200l MC4200

Table 7: Supported Firmware for Wireless LAN Controllers and Access Points

VisualRF support for the for the AP433i, AP433e, AP433is, AP822i, and AP822e is not included in AirWave8.0.6

Wired Ethernet SwitchesAny standalone Ethernet access switch that supports the standard SNMPMIB-II objects for wired switches canbemonitored by AirWave.

AirWavewill collect the uptime and name/location/contact information for switches (or any device that supportsSNMP). For port information, AirWave relies on the IF-MIB to collect byte counts.

MAC addresses are collected from the BRIDGEMIB and RFC1213 MIB (ARP table) in order to determine AP portassignments and identify possible rogue dvices on the network.

Aruba Mobility Access SwitchesThe Aruba series of Mobility Access Switches (S3500, S2500, and S1500) are supported for profile configuration,monitoring, and software upgrades.

In addition to the port statistics supported formost Ethernet switches with the supported firmware describedbelow, AirWave also tracks the activity of authenticated wired clients on Aruba switches.

Firmware Version Switch Type

Validated up to 7.3.0.0 Standalone and stacked switches

Table 8: Aruba MAS Supported Firmware and Devices

Other SwitchesSome switches have additional support in AirWave:

Ciscol Automated discovery through SNMP


l Model & software version identification

l CDP neighbor information and extended port error stats

l 3750 stack information

Juniper®l Automated discovery through SNMP


l Rogue AP detection is supported using theQ-BRIDGEMIB

HP ProCurvel Automated discovery through SNMP


Alcatel-Lucent OmniSwitch™ (6250 and 6450)l Automated discovery through SNMP


l Stack information

l Firmware version 6.6.1.859.R01

Brocadel Automated discovery through SNMP


l Firmware version 07.4.00cT7f1

Force10l Model & software version identification

l Firmware version 8.4.2.9

Other Devices with Monitoring SupportThis version of AirWave supportsmonitoring for a variety of devices with software versions listed in the tablebelow.


Device Supported Firmware

BelAir 200 main.2005.03.29

Brocade ICX switches 07.4.00cT7f1

Cisco 4800 (Pre-VxWorks) 8.65.2

Table 9: Other Supported Devices


Device Supported Firmware

HPMSM7xx and APs 5.5.3.0-01

HP ProCurve 420 2.0.38 - 2.2.5

HP ProCurve 530 WA.01.16-WA.02.19

HP ProCureve 2626-PWR H.10.35 (ROM H.08.02)

HP 5406 zl Switch K.12.43 (ROM:K.12.12)

HP WESM controllers & APsl xll zl

l WS.01.05 – WS.02.19l WT.01.03 – WT.01.28

Juniper Switch 11.4R1.6 and 12.2R4.5

Meru MC1000, MC3000, MC5000 3.3-118 – 3.6.1-49

Proxim AP-600/700

Proxim AP 2000/40002.0 – 4.0.2

Proxim Tsunami MP.11 QB 954-x, 2454-x, 4954-x, 5054-x 2.3.0 – 4.0.0

Symbol 3021 04.01-23 – 04.02-19

Symbol 4121/4131 3.51-20 – 3.95-04

Symbol 5131/5181 1.1.0.0.045R – 2.5.0.0

Trapeze MXR-2, MXR-8, MXR-20, MXR-2xx, MX-400,MP-3x2, MP-422

5.0.12.2 – 7.0.5.6

Tropos 3/4/5210/5320/9422/9532 5.1.4.7 – 6.6.1.3

Table 9: Other Supported Devices (Continued)


supported devices

Documents