supply & erection schedule (1) strengthening of ht & lt ... · 6 e-clamp no. 3 30 7 33 kv...
TRANSCRIPT
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=
(14+15)
17=
(5X16)
18=
(13+17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subse-quent Storage of following
materials for Strengthening of HT & LT
Network of Baidya-natheshwar Temple
area by Providing 11KV UG Cable,
Replacement of LT Weasel/ Squirrel
Conductor by 95sq mm LT ABC,
Sectionalisers, 2New 200KVA DSS, DP
Structures etc as per TS. Inspection of
the lines to be strengthened , obtain
JSEB's approval for the same and to carry
out the work of 11 kV & LT Lines
including painting of all iron materials
as per TS.(Assorted) Dismantling of
existing LT Line Weasel/ Squirrel
conductor etc and other accessories as
applicable, removing, loading,
transportation, unloading, handing over
the same to JSEB identified store
including proper stacking. [Consisting of
but not limited to the following items,
subject to site requirement]
Sl.
No.Description of Items Unit
Qty.
per
Capacitor
Bank
Total
Qty. for 4
Nos. of
Capacitor
Banks
DSSs
Mode of
Transaction
(Direct or
Bought out
item (D/ BO)
Supply Scheule
Supply & Erection Schedule (1) Strengthening of HT & LT Network of Baidyanatheshwar Temple Area of Deoghar Town.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service tax
(INR)
Total
Value of
Erection
including
Service
Tax (INR)
Supply & Fixing/Erection, Testing &
Commissioning of the following
A 3*300sq mm 11KV UGCable line-
11.10km
1 400Kg PCC Pole 9.0 mtr. No. 4 44
2 D.C.cross- arm of 100 X 50 X 6 mm.
channel 4' centre)
Set 2 22
3 33 KV strain set with hard ware Set 6 67
4 Horizontal and cross bracing 4' centre
with set of four back clamps
Set 2 22
5 G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWG
Set 4 44
6 Concreting of pole including kicking
Block
No. 4 44
7 Concerting of Stay No. 4 44
8 Rod Type Earthing complete No. 4 44
9 Red oxide paint ltr. 5 56
10 Aluminium paint ltr. 5 56
11 Anti climbing devices No. 4 44
12 Danger Boards No. 2 22
13 M.S.Nuts and Bolts Kg. 10 111
14 11kv Underground XLPE Cable (3*300
sq mm)
Km 2.2 24
15 Cable Termination Kit Set 4 44
16 Jointing Kit for cable set 4 44
17 Heat Shrinkable jointing kit for 11 kV
3*300 Sq. mm. XLPE outdoor
Nos. 4 44
18 GI Pipe (80 mm diameter) Mts 30 333
B Additional cable termination Kits for
existing 130Nos of DTRs (3*300sq mm
UGC)
No 520
C Additional Rod type Earthing No 130
D 11KV Sectionalisers No 5
E DP Structures 10 Sets
1 Rail Pole 13.0 mtr, long No. 2 20
2 Stone Pad 300x300x75 mm No. 2 20
3 33 kV top channel 125x65mm 3.2 mtr.
Long
No. 1 10
4 Cross bracing set 50x50x6 mm Set 1 10
5 33 kV Pin Insulator with nut No 3 30
6 E-clamp No. 3 30
7 33 kV Disc Insulator with Hardware
Fittings
Set 6 60
8 Earth wire clamp for 13 mtr. Long Rail
Pole
No. 1 10
9 PP & Clamp for 13 mtr. Long Rail Pole No. 2 20
10 Bracing clamp for Rail pole (Top &
Bottom)
No. 4 40
11 Stay clamp for Rail pole No. 6 60
12 Number plate with clamp No. 1 10
13 Danger board No. 1 10
14 PG clamp for Panther conductor No. 12 120
15 Ms Bolts & nuts off size Kg. 4 40
16 Aluminium binding wire(5mm dia) Kg. 5 50
17 Aluminum Binding tape Kg. 5 50
18 Aluminum paint Ltr 5 50
19 Red oxide paint Ltr 5 50
20 Earthing Pipe 40mm Dia 2mtr long no 1 10
21 GI wire 6SWG Kg. 1 10
22 Barbed wire Kg. 4 40
23 Cement Concreting in 1:3:6 Ratio
including kicking Block
Cub
m
0.678 6.78
24 Rod Type Earthing complete including
GI wire No 6
No 1 10
25 Concerting of Stays with 1:3:6 ratio Nos 6 60
26 Sty Sets complete (1800*20mm) with
Stay Wire 7/10swg
No 6 60
F 11KV Tee Off -10Nos
1 MS Channel 100x50x6 mm. 1525 mm
long
No. 1 10
2 MS Channel clamp with nuts & bolts No. 1 10
3 11 kV Compsite Polymer Disc Insulator
B&S type 70 KN
No. 3 30
4 11 kV Disc fittings B&S type 70 KN No. 3 30
5 PG Clamp for Dog No. 6 60
6 G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWG
No. 2 20
7 Concreting of Stays (1:3:6 Ratio) No. 2 20
G New 11KV/415V 200KVA DSS 11Nos
1 11/0.433 kV 200 kVA Distribution
Transformer
Nos. 1 11
2 400Kg PCC Pole 9.0 mtr. Nos. 2 22
3 Clamps for LT Take off with bolts and
nuts
Nos. 2 22
4 Holding P.P. and clamps with bolts &
nuts for top channel TPMO and fuse sets
etc. with bolts and nuts.
Nos. 10 110
5 MS channel 100x50x2088 mm (Dropper
for fuse)
Nos. 1 11
6 MS channel 125x65x2240 mm (Top) Nos. 1 11
7 MS channel 125x65x1300 mm Tee off Nos. 1 11
8 MS channe 75x75x2028 mm Nos. 2 22
9 11 kV Composite Polymer Disc
Insulators B&S Type 4500 kg with
fitting complete.
Nos. 6 66
10 G.I. Stay Set complete (1800x 20 mm)
with stay wire 7/10 SWG
Nos. 2 22
11 Concerting of Stays with 1:3:6 ratio No. 2 22
12 11 kV G.O. switch. 400 amp. Nos. 1 11
13 11 kV Drop out fuse set. Nos. 1 11
14 11 kV Pin Insulator with pins Nos. 3 33
15 LT Panel with MCCB protection Nos. 1 11
16 DTR Metering Cubical with meter and
modem for communication
Nos. 1 11
17 ACSR Conductor Rabbit for Jumper Mtr. 30 330
18 Danger boards and barbed wire LS 1 11
19 11 kv. Lightening arrester(9 KV 5 KA 1
Phase )
No 3 33
20 Rod type earthing for pole Nos. 2 22
22 Delta Earthing for Transformer body and
LA's separetly
Nos. 2 22
24 50 Sq.mm.,single core `XLPE insulated
un-armoured aluminium conductor cable
Mtr. 80 880
25 1*250 Sq.mm.,single core `XLPE
insulated un-armoured aluminium
conductor cable
Mtr. 120 1320
26 1*400 Sq.mm.,single core `XLPE
insulated un-armoured aluminium
conductor cable
Mtr. 40 440
27 Cement Concreting of Poles in 1:3:6
Ratio including kicking Block
No. 2 22
28 Red oxide paint Ltr 5 55
29 Aluminium paint Ltr 5 55
H Conversion of existing LT line with
95sq mm AB Cable 12km
1 Suspension Clamp assembly including
pole clamps
No. 14 168
2 Dead end clamp assembly including,
pole clamps
No. 6 72
3 Piercing connector Type-I for single
phase
No. 20 240
4 Piercing connector Type-I for three phase No. 40 480
5 Piercing connector Type-II No. 8 96
6 Aerial Bunched Cable of Size
3*95+1*70+1*60 sqmm
Km. 1.03 12.36
7 G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWG
Set 12 144
8 Mid span jointing sleeve(95 sqmm.) No. 4 48
9 Concerting of Stays with 1:3:6 ratio No. 12 144
10 Nuts and bolts supply only Kg. 30 360
11 Dist. Box for housing 5 No. 10Amps
MCCB including accessories for fixing
with pole suitable for AB XLPE Cable-
Three Phase 1 in 3 out
No. 20 240
12 1x35 mm2 XLPE/PVC insulated Al.
cable for energising the distribution
boxes/ kiosks.
Mt. 200 2400
13 1x16 mm2 XLPE insulated Al. cable for
energising the Street light
Mt. 30 360
14 Service rings No. 20 240
15 Four/Five pin cross arm No. 40 480
16 Rod Type Earthing complete No. 20 240
I Additional Poles for existing LT Line
covering AB Cable 50Nos
1 9 mtr. long PCC Pole (WL-200 kg.) No. 1 50
2 Suspension clamp assembly including
suitable clamps
Set 1 50
3 G.I. Wire 5 mm (6 SWG) for Earthing
with G.I Erath Spike & Galvanised Nut
& Bolt as per TS/Drawing
No 1 50
4 Universal hook with Bolts & nuts No 1 50
5 PVC Insulated lugs- CPTAU for 185 sq
mm
Set 1 50
6 Anti climbing Device No 1 50
7 Caution Board No 1 50
8 Stay Set with Guy Insulator & Stay wire
as per TS
Set 1 50
9 M S Bolts & Nuts ( Assorted ) Supply
only
Kg 0.5 25
10 Concreting of Stays (1:3:6 Ratio) No 1 50
1
2
3
4
5
TOTAL
All fabricated material such as clamps, channels etc. shall be galvanized
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
6
7
8
9
10
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB Stores
including proper stacking.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage for R & M of
Distribution Sub Stations. Inspection of
the DSS , obtain JSEB's approval for the
same. Dismantling of existing
(Damaged/ Unserviceable) Distribution
Box, LAs,LT Protection Kit,LT Cable etc
and other accessories as applicable,
removing, loading, transportation,
unloading, handing over the same to
JSEB identified store including proper
stacking and to carry out R & M of DSSs
along with other associated works as per
TS. [Consisting of but not limited to the
following items, subject to site
requirement]
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Supply & Erection Schedule (2) R & M of Distribution Substations: 25 & 20 KVA - 240 Nos, 63 KVA - 13 Nos., 100 KVA - 146 Nos. 7 200 KVA-106 Nos.
Total-505 Nos.
Description of Items Unit
Qty.
per
DSS
Total
Qty.
for
505
Nos.
of
DSSs
Sl.
No.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply & Fixing/Erection, Testing &
Commissioning of the following
1 L.T. Distribution box for suitable
transformer (without TPN switches) with
MCCB on incoming and PF units on
outgoing side
No 1 505
2 DC CrossArm 100*50*6mm- 4feet No 2 1010
3 11KV Lightening Arrester ( 9KV, 5KA,
Single Phase) One set of 3Nos
Set 1 505
4 Two Nos of Protection Unit having 3 nos
of LT Kit Kat 600A of reputed make per
unit with all accessories for two LT
circuits. One Set of 2Nos of Protection
Units
Set 1 505
5 Delta Earthing set complete for Neutral
& T/R Body/LA
No 2 1010
6 LT Cable 4c*25sq mm for 240Nos of
20&25 KVA DSS
Mtr 12 2880
LT Cable 3.5c*70sq mm for 13Nos of 63
KVA DSS
Mtr 12 156
LT Cable 3.5c*150 sq mm for 146Nos of
100 KVA DSS
Mtr 12 1752
LT Cable 1c*400 sq mm for 106Nos of
200 KVA DSS
Mtr 12 1272
1
2
3
4
5
6
TOTAL
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
7 Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other Taxes,
duties &
Levies (to be
specified
Clearly) (INR/
per unit)
Unit F &
I charges
incl. any
tax
(INR/ per
unit)
1 2 3 4 5 6 7 8 9 10 11 12=(7+8+
9+10+11)
13=
5X12
14 15 16=(14+1
5)
17=(5X16
)
18=(13+1
7)
Design, Engineering,
Manufacturing, Assembly,
Inspection, Testing at
manufacturer's works before
Despatch, Packing, Supply,
Delivery at site and subsequent
Storage for Providing additional
Pole in existing LT Line (Required
during conversion from ACSR to
AB Cable). Inspection of the line
to identify the section which need
to be Renovated/Augmented,
obtain JSEB's approval for the
same, to provide additional
Intermediate pole where the
Renovation/Augmentation work of
LT line by LT AB Cable is taken
up as per TS. (Assorted)
[Consisting of but not limited to
the following items, subject to site
requirement]
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply Erection Schedule (3) Providing additional Pole in existing LT Line (Required during conversion from ACSR to AB Cable)-Total Qty. 1030 Nos.
Total
Value of
Supply
and
Erection
Description of ItemsSl.
No.Unit
Qty.
per
Pole
Total
Qty.
for
1030
Nos
of
Poles
Supply Scheule Erection Scheule
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB and
not included in the price at Column (7)
in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Supply & Erection, Testing &
Commissioning of the following
1 9 mtr. long PCC Pole (WL-200
kg.)
No. 1 1030
2 Suspension clamp assembly
including suitable clamps
Set 1 1030
3 G.I. Wire 5 mm (6 SWG) for
Earthing with G.I Erath Spike &
Galvanised Nut & Bolt as per
TS/Drawing
No 1 1030
4 Universal hook with Bolts & nuts No 1 1030
5 PVC Insulated lugs- CPTAU for
185 sq mm
Set 1 1030
6 Anti climbing Device No 1 1030
7 Caution Board No 1 1030
8 Stay Set with Guy Insulator &
Stay wire as per TS
Set 1 1030
9 M S Bolts & Nuts ( Assorted ) Kg 0.5 515
10 Concreting of Stays (1:3:6 Ratio) No 1 1030
1
2
3
4
5
6
7
8
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Total
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR
/ per
unit)
Other
Taxes, duties
& Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F &
I
charges
incl.
any tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Sl.
No.Description of Items Unit
Qty.
per
CKM
Total
Qty.
18.77
CKM
Supply & Erection Schedule (4) Conversion & Rearrangement of existing LT Squirrel/ Weasel Conductor by LT ABC 3C* 35Sq mm-Total Qty 18.77
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
suppl
y
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Augmentation/ Renovation
(Conversion & Rearrangement of
existing LT Squirrel/Weasel
Conductor by LT ABC 3C* 35Sq
mm& Messenger Wire along with
supply of additional pole &
accessories required for
augmentation of line, replacement of
all damaged accessories, if required
to complete the entire work.
Inspection of the line to identify the
section which need to be
Renovated/Augmented, obtain
JSEB's approval for the same,
dismantling of Squirrel/Weasel
conductor and damaged
accessories, removing, loading,
transportation, unloading, handing
over the same to JSEB identified
store including proper stacking and
to carry out the
Renovation/Augmentation work of
LT line by 3*35sq mm LT AB Cable
as per TS.(Assorted )
[Consisting of but not limited to the
following items, subject to site
requirement]
Supply & Erection, Testing &
Commissioning
1Suspension Clamp assembly
including pole clampsNo. 14 263
2Dead end clamp assembly including,
pole clampsNo. 6 113
3Piercing connector Type-I for single
phaseNo. 20 375
4Piercing connector Type-I for three
phaseNo. 40 751
5 Piercing connector Type-II No. 8 150
6Aerial Bunched Cable of Size
3C*35+25 Sq.mmKm. 1.03 19
7G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWGSet 12 225
8 Mid span jointing sleeve(50 sqmm.) No. 4 75
9Nuts and bolts *(Assorted) Supply
onlyKg. 30 563
10
Dist. Box for housing 5 No. 10Amps
MCCB including accessories for
fixing with pole suitable for AB
XLPE Cable-Three Phase 1 in 3 out
No. 20 375
11
1x35 mm2 XLPE/PVC insulated Al.
cable for energising the distribution
boxes/ kiosks.
Mt. 200 3754
121x16 mm2 XLPE insulated Al. cable
for energising the Street lightMt. 30 563
13 Service rings No. 20 375
14 Four/Five pin cross arm No. 40 751
15 Rod Type Earthing complete No. 20 375
16 Concreting of Stays (1:3:6 Ratio) No. 12 225
1
2
3
4
5
6
7
8
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
TOTAL
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F &
I
charges
incl.
any tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Augmentation/ Renovation
(Conversion & Rearrangement of
existing LT Squirrel/Weasel
Conductor by LT ABC 3C* 50Sq
mm& Messenger Wire along with
supply of additional pole &
accessories required for
augmentation of line, replacement of
all damaged accessories, if required
to complete the entire work.
Inspection of the line to identify the
section which need to be
Renovated/Augmented, obtain
JSEB's approval for the same,
dismantling of Squirrel/Weasel
conductor and damaged accessories,
removing, loading, transportation,
unloading, handing over the same to
JSEB identified store including
proper stacking and to carry out the
Renovation/ Augmentation work of
LT line by 3*50sq mm LT AB
Cable as per TS.(Assorted )
[Consisting of but not limited to the
following items, subject to site
requirement]
Supply & Erection Schedule (5) Conversion & Rearrangement of existing LT Squirrel/Weasel Conductor by LT ABC 3C* 50Sq mm-Total Qty :- 130.37 CKm.
Sl.
No.Description of Items Unit
Qty.
per
CKM
Total
Qty.
130.37
cKM
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply Scheule Erection Scheule
Supply & Erection, Testing &
Commissioning of the following
1 Suspension Clamp assembly
including pole clamps
No. 14 1825
2 Dead end clamp assembly including,
pole clamps
No. 6 782
3 Piercing connector Type-I for single
phase
No. 20 2607
4 Piercing connector Type-I for three
phase
No. 40 5215
5 Piercing connector Type-II No. 8 1043
6 Aerial Bunched Cable of Size
3C*50+1*16+1*35 Sq.mm
Km. 1.03 134
7 G.I. Stay Set complete (1800x20
mm) with stay wire 7/10 SWG
Set 12 1564
8 Mid span jointing sleeve(50 sqmm.) No. 4 521
9 Nuts and bolts *(Assorted) Kg. 30 3911
10 Dist. Box for housing 5 No. 10Amps
MCCB including accessories for
fixing with pole suitable for AB
XLPE Cable-Three Phase 1 in 3 out
No. 20 2607
11 1x35 mm2 XLPE/PVC insulated Al.
cable for energising the distribution
boxes/ kiosks.
Mt. 200 26074
12 1x16 mm2 XLPE insulated Al. cable
for energising the Street light
Mt. 30 3911
13 Service rings No. 20 2607
14 Four/Five pin cross arm No. 40 5215
15 Rod Type Earthing complete No. 20 2607
16 Concreting of Stays (1:3:6 Ratio) No. 12 1564
1
2
3
4
5
6
7
TOTAL
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
8 Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+9
+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage of following
materials for Reconductoring of 11kV
Line from Rabbit ACSR to DOG ACSR
as per TS Inspection of the line to
identify the section which need to be
Renovated/Augmented, obtain JSEB's
approval for the same, dismantling of
conductor and damaged accessories,
removing, loading, transportation,
unloading, handing over the same to
JSEB identified store including proper
stacking and to carry out the
Renovation/ Augmentation work of 11
kV line by ACSR DOG Conductor
including painting of all iron materials
& poles as per TS.(Assorted )
[Consisting of but not limited to the
following items, subject to site
requirement]
Description of Items
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply Scheule
Supply & Erection Schedule (6) Reconductoring of existing 11KV RABBIT ACSR of Daburgram I & II & Satsang Feedersby DOG ACSR. Qty:- 47km
Erection Scheule
Unit
Qty.
Per
km.
Total
Qty.
for
47
km.
Mode of
Transaction
(Direct or
Bought out
item (D/ BO)
Sl.
No.
Supply, Erection/Fixing, Testing &
commissioning of the following
1 11kV Pin Insulator with G.I. Pin for 11
kV Pin insulator
No. 12564
2 11 kV Disc Insulator (T&C Type 45
KN) with Hardware Fittings for
Disc Insulator
No. 6
282
3 E- bracket for 11KV No. 2 94
4 G.I. HT Stay Set ( 1800*20mm) , H.T.
Guy insulator & 7/10SWG G.I Stay
wire
No. 12
564
5 G.I. Wire 5 mm (6 SWG) for Rod Type
Earthing with G.I Galvanised Nut &
Bolt as per TS/Drawing
No. 20
940
6 50 sq.mm ACSR DOG Conductor with
3%sag
Km 3.09145
7 PG Clamps suitable for ACSR DOG No. 3 141
8 Caution Board (11 kV) with clamps &
Bolts
No. 20940
9 Aluminium Tape (0.77 x 6.4 mm) Kg. 2 94
10 Aluminium Binding Wire Kg. 3 141
11 Aluminium Jointing Sleeve No. 6 282
12 Red Oxide Paint Ltr 5 235
13 Alluminium Paint Ltr 5 235
14 MS nuts & Bolts (Assorted size ) only
Supply
Kg. 10470
15 Concreting of Stays (1:3:6 Ratio) No. 12 564
Total
1
2
3
4
5
6
7
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
8
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR / per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 11
12=(7+
8+9+10
+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Sl.
No.Description of Items Unit
Qty.
Per
km.
Total
Qty.
for
40.67
km.
Mode of
Transac
tion
(Direct
or
Bought
out item
(D/ BO)
Supply & Erection Schedule (7) Reconductoring of existing 11KV Line provided with WEASEL ACSR by DOG ACSR. Qty:- 40.67
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit
FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply Scheule
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage of following materials
for Reconductoring of 11kV Line from
Weasel ACSR to DOG ACSR as per TS.
Inspection of the line to identify the
section which need to be
Renovated/Augmented, obtain JSEB's
approval for the same, dismantling of
conductor and damaged accessories,
removing, loading, transportation,
unloading, handing over the same to
JSEB identified store including proper
stacking and to carry out the
Renovation/Augmentation work of 11 kV
line by ACSR DOG Conductor including
painting of all iron materials & poles as
per TS.(Assorted )
[Consisting of but not limited to the
following items, subject to site
requirement]
Supply, Erection/Fixing, Testing &
commissioning of the following
1 11kV Pin Insulator with G.I. Pin for 11
kV Pin insulator
No. 12488
2 11 kV Disc Insulator (T&C Type 45 KN)
with Hardware Fittings for Disc Insulator
No. 6
244
3 E- bracket for 11KV No. 2 81
4 G.I. HT Stay Set ( 1800*20mm) , H.T.
Guy insulator & 7/10SWG G.I Stay wire
No. 12
488
5 G.I. Wire 5 mm (6 SWG) for Rod Type
Earthing with G.I Galvanised Nut & Bolt
as per TS/Drawing
No. 20
813
6 50 sq.mm ACSR DOG Conductor with
3%sag
Km 3.09126
7 PG Clamps suitable for ACSR DOG No. 3 122
8 Caution Board (11 kV) with clamps &
Bolts
No. 20813
9 Aluminium Tape (0.77 x 6.4 mm) Kg. 2 81
10 Aluminium Binding Wire Kg. 3 122
11 Aluminium Jointing Sleeve No. 6 244
12 Red Oxide Paint Ltr 5 203
13 Alluminium Paint Ltr 5 203
14 MS nuts & Bolts (Assorted size ) Supply
Only
Kg. 10407
15 Concreting of Stays (1:3:6 Ratio) No. 12 488
Total
1
2
3
4
5
6
7
8
9
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps,
guarding angles etc.. Since poles may be existing or newly rected for only once the changes for pole erection will be dealt with accordingly.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Excise
Duty
(INR/
per unit)
Sales Tax/
VAT
(INR/ per
unit)
Other Taxes, duties
& Levies (to be
specified Clearly)
(INR/ per unit)
Unit F & I
charges incl.
any tax
(INR/ per unit)
1 2 3 4 5 7 8 9 10 1112=(7+8+9+10+
11)13= 5X12
Design, Engineering, Manufacturing, Assembly, Inspection,
Testing at manufacturer's works before Despatch, Packing,
Supply, Delivery at site and subsequent Storage of following
materials for 11 kV Line with RABBIT ACSR & 13 mtr Rail
Poles as per TS (consisting of but not limited to the
following major materials) Detailed Route Survey, Erection
of new poles, fixing of cross arm/ V-Bracket, Top Adaptor,
insulators, stringing of conductors,Guarding,Tee-off testing
& commissioning of Overhead new 11 kV Line on13mtr long
Rail Pole by ACSR Rabbit Conductor for JSEB identified
locations, numbering of poles, painting of all iron material &
poles and preparation actual route map as per TS.(Assorted)
[Consisting of but not limited to the following items, subject
to site requirement]
Supply, Erection/Fixing, Testing & commissioning of the
following
1 Rail Pole 105 lbs 13 mar. Long No. 20 602
2 Earth wire clamp No. 20 602
3G.I. Stay Set complete ( 1800x20mm) with stay wire 7/10
SWGNo. 10 301
4 11 KV Pin Insulators with Pin & Nut No. 60 1807
5 MS Channel Cross arm(100x50x6x1600mm) with nut & bolt No. 20 602
611 kV Compsite Polymer Disc. Insulators B&S type 70 KN
with fitting completeNo. 24 723
7 Gaurding Angle (65x65x6x1900 mm) with Nut & Bolt. No. 20 602
8 Top Phase Clamp No. 20 602
Supply & Erection Schedule (8) New 11KV Line with RABBIT ACSR & RAIL Pole 13mtr long. Quantity :- 30.11 km
Sl.
No.Description of Items Unit
Qty.
Per
Km.
Total
Qty. for
30.11
CKm.
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for transaction between
bidder & NBPDCL and not included in the price at Column
(7) in INR
Total Unit
FOR Dest.
Supply Prices
with all taxes
(INR/ Unit)
Total
value of
supply
(INR)
9 P.P. and clamp with nuts & bolts No. 40 1204
10 G.I. Barbed wire Kg. 40 1204
11 F bracket for 11kV with nut & bolt Nos. 20 602
12 Rod Type Earthing complete No. 20 602
13 Danger Boards No. 20 602
14 Alumunium Binding wire Kg. 8 241
15 Alumunium Binding tape Kg. 8 241
16 ACSR Rabbit Conductor for Phase with 3% sag. Km. 3.09 93
17 Jointing Sleeve for ACSR Conductor No 3 90
18 Concreting of Poles including kicking block (1:3:6 Ratio) No 20 602
19 Concreting of Stays (1:3:6 Ratio) No 10 301
Extra 11 KV TEE-off.
20 MS Channel 100x50x6 mm. 1525 mm long No. 1 30
21 MS Channel clamp with nuts & bolts No. 1 30
22 11 kV Compsite Polymer Disc Insulator B&S type 70 KN No. 3 90
23 11 kV Disc fittings B&S type 70 KN No. 3 90
24 PG Clamp for Dog No. 6 181
25G.I. Stay Set complete ( 1800x20mm) with stay wire 7/10
SWGNo. 2 60
26 Concreting of Stays (1:3:6 Ratio) No. 2 60
Guarding of 11 KV line. 3 spans per km
27 Guarding Channel 100x50mm 3.75mtr Nos. 6 181
28 Eye Bolt 16x190mm length kg. 16 482
29 PP & Clamp with Nut Bolt for Pole Nos. 12 361
30 8 SWG GI wire for guard wires and lacings kg. 27 813
31 6 SWG GI wire for guard wires and lacings kg. 123 3704
32 Nut Bolt off Sizes supply only Kg. 6 181
33 AL Paint Ltr 3 90
34 Red Oxide Paint Ltr 15 452
Total
1
2
3
4
5
6
7
All fabricated material such as clamps, channels etc. shall be galvanized
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies
(to be
specified
Clearly)
(INR/
per unit)
Unit F
& I
charge
s incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 11
12=(7+8
+9+10+
11)
13=
5X1214 15
16=(14+
15)
17=(5X16
)
18=(13+
17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage of following materials
for New 11kV Under Ground line with
3*300 Sq.mm HT XLPE as per TS
(consisting of but not limited to the
following major materials)Detailed Route
Survey, Erection of new poles, fixing of
clamps, stringing of cable, testing &
commissioning of Overhead new 11 kV
Line on 9.0 mtr. PSC pole by 3c x 300
sq.mm U G Cable for JSEB identified
locations, numbering of poles, painting of
all iron material & poles (New & Old) and
preparation actual route map as per AQS
and TS.(Assorted ) [Consisting of but not
limited to the following items, subject to
site requirement]
Sl.
No.Description of Items
Mode of
Transacti
on (Direct
or Bought
out item
(D/ BO)
Supply Scheule
Qty.
Per km.
Total
Qty. for
12.89
km.
Supply & Erection Schedule (9) New 11kV Under Ground line with 3*300 Sq.mm HT XLPE : For Bifurcation : 12.89km . Total 12.89km
Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties
applicable for transaction
between bidder & JSEB and not
included in the price at Column
(7) in INR
Total
Unit
FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
includin
g service
tax
(INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Unit
Supply, Erection/fixing, Laying of cable as
per TS, testing & commissioned of the
following
1 400Kg PCC Pole 9.0 mtr. No. 4 52
2D.C.cross- arm of 100 X 50 X 6 mm.
channel 4' centre)Set 2 26
3 33 KV strain set with hard ware Set 6 77
4Horizontal and cross bracing 4' centre with
set of four back clampsSet 2 26
5G.I. Stay Set complete ( 1800x20mm) with
stay wire 7/10 SWGSet 4 52
6Concreting of pole including kicking
Block
No. 452
7 Concerting of Stay No. 4 52
8 Rod Type Earthing complete No. 4 52
9 Red oxide paint ltr. 5 64
10 Aluminium paint ltr. 5 64
11 Anti climbing devices No. 4 52
12 Danger Boards No. 2 26
13 M.S.Nuts and Bolts Kg. 10 129
1411kv Underground XLPE Cable (3*300 sq
mm) Km 2.2 28
15 Cable Termination Kit Set 4 52
16 jointing Kit for cable set 4 52
17Heat Shrinkable jointing kit for 11 kV
3*300 Sq. mm. XLPE outdoor
Nos. 452
18 GI Pipe (80 mm diameter) Mts 30 387
Total
1
2
3
4
5
6
7
8
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Detailed Survey, Design, Engineering,
Manufacturing, Assembly, Inspection,
Testing at manufacturer's works before
Despatch, Packing, Supply, Delivery at
site and subsequent Storage for 11
kV/0.433 kV Distribution Transformer
substations of 25 kVA mounted on D.P.
Structure Complete & Erection of DSS
with associated Switchgear Equipments as
per TS. testing & commissioning of DSS
(consisting of but not limited to the
following major materials subject to site
requirement)
Supply & Erection, Testing &
Commissioning of the following
1
25 KVA, 11/0.433 kv three phase
Aluminium wound conventional out door
type D.T/Fs. with losses conforming to 4
star rating of B.E.E.
No 1 85
2 PCC Pole 9.0 mtr. No 2 170
Supply & Erection Schedule (10) New 11/0.433 kV, Pole mounted 25 KVA DSS - Total Qty. 85 Nos.
Sl.
No.Description of Items Unit
Qty.
per
DSS
Total
Qty.
for 85
DSSs.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR Total
Value of
Erection
including
Service
Tax
(INR)
Supply Scheule
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
3G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWGNo. 1 85
4 X-mer mounting arrangement set 1 85
5 D.O. mounting Channel 75x40x6 mm No 1 85
611 kv. Lightening arrester(9 KV 5 KA 1
Phase )No 3 255
7 11 KV. D.O. set (Set of 3Nos) Set 1 85
8
Protection cum metering box with 40
Amps MCCB & With GSM modem
having RS-232 communication port & 4
No. three phase meter for 25 KVA X-mer
No 1 85
935 Sq mm. XLPE insulated Single core
Al.cablemtr 315 26775
106 sqmm PVC insulated 4 core armoured
Al.cable mtr 260 22100
11 G.I. Pipe 40 mm (9 mtr per s/s) mtr 9 765
12 G.I. Wire 8 swg kg 60 5100
13 11 kv - pin insulator with pin & nut No 3 255
14Delta Earthing for Transformer body and
LA's separetlyNo 3 255
15 Rod type earthing Nos. 1 85
16 Nuts & bolts assorted size kg 3 255
17 I- bolt - 16 mm no 7 595
18 Red oxide paint Ltr 5 425
19 Aluminium paint Ltr 5 425
20 Concreting of Stays (1:3:6 Ratio) No 1 85
1
2
3
4
5
6
7
8
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
9
10 Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes, duties
& Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F &
I
charges
incl.
any tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Detailed Survey, Design, Engineering,
Manufacturing, Assembly, Inspection,
Testing at manufacturer's works before
Despatch, Packing, Supply, Delivery at
site and subsequent Storage for 11
kV/0.433 kV Distribution Transformer
substations of 25 kVA mounted on D.P.
Structure Complete & Erection of DSS
with associated Switchgear Equipments
as per TS. testing & commissioning of
DSS (consisting of but not limited to
the following major materials subject
to site requirement)
Supply & Erection, Testing &
Commissioning of the following
111/0.433 kV 63 kVA Distribution
Transformer Nos. 1 119
2 400Kg PCC Pole 9.0 mtr. Nos. 2 238
3Clamps for LT Take off with bolts and
nuts Nos.
2238
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply & Erection Schedule (11) 11 kV/0.433 kV Distribution Transformer substations of 63 kVA mounted on D.P. Structure. Total QtyL:- 119Nos
Sl.
No.Description of Items Unit
Qty.
per
DSS
Total
Qty.
for
119
Nos.
DSSs
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
4
Holding P.P. and clamps with bolts &
nuts for top channel TPMO and fuse
sets etc. with bolts and nuts.
Nos.
10
1190
5MS channel 100x50x2088 mm
(Dropper for fuse)Nos.
1119
6 MS channel 125x65x2240 mm (Top) Nos.1
119
7 MS channel 125x65x1300 mm Tee off Nos.1
119
8 MS channel 75x75x2028 mm Nos. 2 238
9
11 kV Composite Polymer Disc
InsulatorsB&S Type 4500 kg with
fitting complete.
Nos. 6 714
10G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWGNos. 2 238
11 11 kV G.O. switch. 400 amp. Nos. 1 119
12 11 kV Drop out fuse set. Nos. 1 119
13 11 kV Pin Insulator with pins Nos. 3 357
14 LT Panel with MCCB protection Nos. 1 119
15DTR Metering Cubical with meter and
modem for communicationNos. 1 119
16 ACSR Conductor Rabbit for Jhumper Mtr. 30 3570
17 Danger boards and barbed wire LS 1 119
1811 kv. Lightening arrester(9 KV 5 KA
1 Phase )Set
3357
19 Rod type earthing for pole Nos. 2 238
20Delta Earthing for Transformer body,
neutral and LA's separetlyNos.
3357
21
50 Sq.mm.,single core `XLPE insulated
un-armoured aluminium conductor
cable
Mtr.
120
14280
22
70 Sq.mm.,single core `XLPE insulated
un-armoured aluminium conductor
cable
Mtr.
40
4760
23 Red oxide paint ltr. 5 595
24 Aluminium paint ltr. 5 595
25 Concreting of Stays (1:3:6 Ratio) Nos. 2 238
Total
1
2
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
3
4
5
6
7
8
9
10
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
Bidder shall arrange for removing,loading & transportation of all dismantled/ released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB Stores
including proper stacking.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works/ items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F &
I
charges
incl. any
tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Detailed Survey, Design, Engineering,
Manufacturing, Assembly, Inspection,
Testing at manufacturer's works
before Despatch, Packing, Supply,
Delivery at site and subsequent
Storage for 11 kV/0.433 kV
Distribution Transformer substations
of 100 kVA mounted on D.P.
Structure Complete & Erection of
DSS with associated Switchgear
Equipments as per TS. testing &
commissioning of DSS (consisting of
but not limited to the following
major materials subject to site
requirement)
Supply & Erection, Testing &
Commissioning of the following
111/0.433 kV 100 kVA Distribution
Transformer
Nos. 1 33
2 400Kg PCC Pole 9.0 mtr.long Nos. 2 66
3 Clamps for LT Take off with bolts and nuts Nos. 2 66
Supply & Erection Schedule (12) New 11/0.433 kV, Pole mounted 100 KVA DSS - Total Qty 33 Nos.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Value of
Erection
including
Service
Tax.(INR
)
Sl.
No.Description of Items Unit
Qty.
per
DSS
Total
Qty.
for 33
DSSs
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
4
Holding P.P. and clamps with bolts &
nuts for top channel TPMO and fuse
sets etc. with bolts and nuts.
Nos. 10 330
5
Steel structure and associated
erection accessories complete
(consisting of but not limited to
the following)
0
5a MS channel 100x50x2088 mm (Dropper for fuse)Nos. 1 33
5b MS channel 125x65x2240 mm (Top) Nos. 1 33
5c MS channel 125x65x1300 mm Tee off Nos. 1 33
5d MS channe 75x75x2028 mm Nos. 2 66
6
11 kV Composite Polymer Disc
Insulators B&S Type 4500 kg with
hardware fitting complete.
Nos. 6 198
7G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWG
Nos. 2 66
8 11 kV G.O. switch. 400 amp. Nos. 1 33
9 11 kV Drop out fuse set.of 3 nos Set 1 33
10 11 kV Pin Insulator with pins & nuts Nos. 3 99
11LT Panel suitable for 100KVA DTR
with MCCB protection
Nos. 1 33
12
DTR Metering Cubical with GPRS
based AMR Compatible meter and
modem for communication
Set 1 33
13 ACSR Conductor Rabbit for Jamper Mtr. 30 990
14 Danger boards and barbed wire Lot 1 33
15 11 kv. Lightening arrester(9 KV 5 KA 1 Phase ) Set of 3NosSet 1 33
16 Rod type earthing for pole Nos. 2 66
17Delta Earthing for Transformer body,
neutral and LA's separetly
Nos. 3 99
18
50 Sq.mm.,single core `XLPE
insulated 1.1 KV class un-armoured
aluminium conductor cable
Mtr. 120 3960
19
70 Sq.mm.,single core `XLPE
insulated 1.1KV class un-armoured
aluminium conductor cable
Mtr. 40 1320
20 Red oxide paint Ltr 5 165
21 Aluminium paint Ltr 5 165
22Concreting of Poles including kicking
block (1:3:6 Ratio)
Nos. 2 66
23 Concreting of Stays (1:3:6 Ratio) Nos. 2 66
Total
1
2
3
4
5
6
7
8
9
10
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F &
I
charges
incl. any
tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Detailed Survey, Design, Engineering,
Manufacturing, Assembly, Inspection,
Testing at manufacturer's works
before Despatch, Packing, Supply,
Delivery at site and subsequent
Storage for 11 kV/0.433 kV
Distribution Transformer substations
of 100 kVA mounted on D.P.
Structure Complete & Erection of
DSS with associated Switchgear
Equipments as per TS. testing &
commissioning of DSS (consisting of
but not limited to the following
major materials subject to site
requirement)
Supply & Erection, Testing &
Commissioning of the following
111/0.433 kV 100 kVA Distribution
Transformer
Nos. 1 4
2 400Kg PCC Pole 9.0 mtr.long Nos. 2 8
3 Clamps for LT Take off with bolts and nuts Nos. 2 8
Supply & Erection Schedule (13) New 11/ 0.433 kV, Pole mounted 200 KVA DSS - Total Qty 4 Nos.
Sl.
No.Description of Items Unit
Qty.
per
DSS
Total
Qty.
for 33
DSSs
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax.(INR
)
4
Holding P.P. and clamps with bolts &
nuts for top channel TPMO and fuse
sets etc. with bolts and nuts.
Nos. 10 40
5
Steel structure and associated
erection accessories complete
(consisting of but not limited to
the following)
0
5a MS channel 100x50x2088 mm (Dropper for fuse)Nos. 1 4
5b MS channel 125x65x2240 mm (Top) Nos. 1 4
5c MS channel 125x65x1300 mm Tee off Nos. 1 4
5d MS channe 75x75x2028 mm Nos. 2 8
6
11 kV Composite Polymer Disc
Insulators B&S Type 4500 kg with
hardware fitting complete.
Nos. 6 24
7G.I. Stay Set complete ( 1800x20mm)
with stay wire 7/10 SWG
Nos. 2 8
8 11 kV G.O. switch. 400 amp. Nos. 1 4
9 11 kV Drop out fuse set.of 3 nos Set 1 4
10 11 kV Pin Insulator with pins & nuts Nos. 3 12
11LT Panel suitable for 100KVA DTR
with MCCB protection
Nos. 1 4
12
DTR Metering Cubical with GPRS
based AMR Compatible meter and
modem for communication
Set 1 4
13 ACSR Conductor Rabbit for Jamper Mtr. 30 120
14 Danger boards and barbed wire Lot 1 4
15 11 kv. Lightening arrester(9 KV 5 KA 1 Phase ) Set of 3NosSet 1 4
16 Rod type earthing for pole Nos. 2 8
17Delta Earthing for Transformer body,
neutral and LA's separetly
Nos. 3 12
18
50 Sq.mm.,single core `XLPE
insulated 1.1 KV class un-armoured
aluminium conductor cable
Mtr. 120 480
19
70 Sq.mm.,single core `XLPE
insulated 1.1KV class un-armoured
aluminium conductor cable
Mtr. 40 160
20 Red oxide paint Ltr 5 20
21 Aluminium paint Ltr 5 20
22Concreting of Poles including kicking
block (1:3:6 Ratio)
Nos. 2 8
23 Concreting of Stays (1:3:6 Ratio) Nos. 2 8
Total
1
2
3
4
5
6
7
8
9
10
All fabricated material such as clamps, channels etc. shall be galvanized
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Stringing of lines of different voltages(33kV, 11kV & LT) with either bare conductor or ABC will be paid appropriately as per rate schedule for stringing & fixing of cross arm, clamps, guarding
angles etc.. Since poles may be existing or newly erected for only once the changes for pole erection will be dealt with accordingly.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated items.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be
specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 11
12=(7+
8+9+10
+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering,
Manufacturing, Assembly,
Inspection, Testing at
manufacturer's works before
Despatch, Packing, Supply, Delivery
at site and subsequent Storage for
Providing New DP Structyres on
13mtr long Rail Poles. Detailed
Route Survey, Erection of DP
Structures identified locations,
numbering of poles, painting of all
iron material & poles and
preparation actual route map as per
TS. (Assorted) [Consisting of but not
limited to the following items,
subject to site requirement
Supply & Erection/fixing of the
following
1 Rail Pole 13.0 mtr, long No. 2 190
2 Stone Pad 300x300x75 mm No. 2 190
3 33 kV top channel 125x65mm 3.2
mtr. Long
No. 195
Supply & Erection Schedule (14): Providing DP Structures with 13Mtr long Rail Poles Qty:-95Nos
Total
Value of
Erection
including
Service
Tax
(INR)
Mode of
Transaction
(Direct or
Bought out
item (D/ BO)
Supply Scheule Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable Total
Unit
FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Sl.
No.Description of Items Unit
Qty.
Per DP.
Total
Qty. for
95 Nos.
4 Cross bracing set 50x50x6 mm Set 1 95
5 33 kV Pin Insulator with nut No 3 285
6 E-clamp No. 3 285
7 33 kV Disc Insulator with Hardware
Fittings
Set 6570
8 Earth wire clamp for 13 mtr. Long
Rail Pole
No. 195
9 PP & Clamp for 13 mtr. Long Rail
Pole
No. 2190
10 Bracing clamp for Rail pole (Top &
Bottom)
No. 4380
11 Stay clamp for Rail pole No. 6 570
12 Number plate with clamp No. 1 95
13 Danger board No. 1 95
14 PG clamp for Panther conductor No. 12 1140
15 Ms Bolts & nuts off size Kg. 4 380
16
Aluminium binding wire(5mm dia)
Kg. 5475
17 Aluminum Binding tape Kg. 5 475
18 Aluminum paint Ltr 5 475
19 Red oxide paint Ltr 5 475
20 Earthing Pipe 40mm Dia 2mtr long no 195
21 GI wire 6SWG Kg. 1 95
22 Barbed wire Kg. 4 380
23 Cement Concreting in 1:3:6 Ratio
including kicking Block
Cubm 0.67864.41
24 Rod Type Earthing complete
including GI wire No 6
No 195
25 Concerting of Stays with 1:3:6 ratio Nos 6570
26 Sty Sets complete (1800*20mm)
with Stay Wire 7/10swgNo 6 570
1
2
3
4
5
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
6
7
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be
specified
Clearly)
(INR/ per
unit)
Unit F &
I charges
incl. any
tax
(INR/ per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+9
+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Supply & Erection Schedule (15: Reconductoring of 33KV Line from DOG ACSR to PANTHER ACSR.--Qty:-09.60 km
Sl.
No.Description of Items Unit
Quan
tity
Per
Km.
Total
Quantity
for 9.60
km.
Mode of
Transacti
on (Direct
or Bought
out item
(D / BO)
Supply Scheule Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the
price at Column (7) in INRTotal Unit
FOR Dest.
Supply
Prices with
all taxes
(INR/Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before
Despatch, Packing, Supply, Delivery
at site and subsequent Storage of
following materials for
Reconductoring of 33kV Line from
DOG ACSR to PANTHER ACSR as
per TS Inspection of the line to
identify the section which need to be
Renovated/Augmented, obtain
JSEB's approval for the same,
dismantling of conductor and
damaged accessories, removing,
loading, transportation, unloading,
handing over the same to JSEB
identified store including proper
stacking and to carry out the
Renovation/Augmentation work of
33 kV line by ACSR PANTHER
Conductor including painting of all
iron materials & poles (old + new) as
per TS.(Assorted ) [Consisting of but
not limited to the following items,
subject to site requirement]
1 Rod Type Earthing complete Nos. 3 29
233 KV Pin Insulator with G.I.Pins &
nutsNos. 24 230
333 KV Disc Insulator (B&S) Type
with fittingNos. 12 115
4ACSR Conductor PANTHER with 3
% SagKms. 3.1 30
5
Jointing Sleeves suitable for 120 Sq.
mm.Al. Eq. ACSR/AAAC conductor Nos. 6 58
6 PG clamp for Panther Nos. 3 29
7
G.I. Stay Set complete (
1800x20mm) with stay wire 7/10
SWG
No. 12 115
8 M.S.Nuts and Bolts ( Assorted ) Kg. 10 96
9Concreting of Stays with 1:3:6 Ratio
No 12 115
1
2
3
4
5
6
7
8
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB Stores including proper stacking.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F &
I charges
incl. any
tax
(INR/ per
unit)
1 2 3 4 5 6 7 8 9 10 11
12=(7+8
+9+10+
11)
13 =
(5X12)14 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Inspection of the Sub-station to
Augment The Power Transformer
obtain JSEB approval for the same,
dismantling of Power
Transformer,VCB,CT,C&R Panel and
other accessories as applicable,
removing, loading, transportation,
unloading, handing over
the same to JSEB identified store
including proper stacking and obtain
JSEB Approval to carry out the
Augmentation of Power Transformer
including painting of all iron materials
as per TS. [Consisting of but not limited 1 Supply, Erection including foundation,
Testing & Commissioning of 33/ 11 kV,
Dyn11, Outdoor type, 10 MVA, 3-
phase, 50 Hz, ONAN Copper wound
conventional type power transformer
along with on-load tap changer as per
TS.
Nos. 1 1
Supply & Erection Schedule (16) : Augmentation of 33/11kV, 5 MVA Power Transformer by 10 MVA Power Transformer with a) New Transformer of 10 MVA and b) replacement of
associated Switchgear 1 Nos for 33KV Baidyanathpur PSS @ Deoghar
Total
value of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax.
(INR)
Sl.
No.Description of Items Unit
Qty.
.1
Total
Qty. for
1 No.
Mode of
Trans-
action
(Direct
or
Bought
out item
(D/ BO)
Supply Scheule Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit
FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
2 Supply, Erection, Testing &
Commissioning of 36KV, 1250 A,
(25KA S.C. rating) for 3 sec, 3-Ph,
Outdoor type Vacuum Circuit Breaker
(with 30V DC tripping/closing coil and
associated control) along with
marshalling box, terminal connectors
and required accessories complete as per
applicable TS (Wherever desirable)
Nos. 1 1
3 12KV, 1250 A, 3-Ph,.Outdoor type
Vacuum Circuit Breaker (30 V DC
tripping/closing coil) and other
accessories etc as per applicable TS
(Incomer Feeder / Bus coupler Panel).
Nos. 1 1
4 33KV Control & Relay panel for
individual control of Power Transformer
(suitable for 30 V DC tripping/closing
coil and associated control) along with
E/F, O/C & Differential relays, Static
energy meter (class 0.5 with
communication port) , Mimic Diagram,
Voltmeter, Ammeter etc. as per TS.
Nos. 1 1
5 Supply, Erection, Testing &
Commissioning of 11 KV Control &
Relay panel for Power Transformer
(suitable for 30 V DC tripping/closing
coil and associated control) along with
E/F, O/C & Differential relays, Static
energy meter (class 0.5 with
communication port) , Mimic Diagram,
Voltmeter, Ammeter etc. as per TS
Nos. 1 1
6 Supply & Erection of 33 kV 800A
Isolator
Nos. 1 1
7 Supply & Erection of Structure for 33
kV Isolator
Set 1 1
8 11 kV Power Cables
8.1 Supply of 11 kV 3C x 400 Sq.mm XLPE
Cable & Laying of cable including cost
of Sand & Bricks
Mtr 30 30
8.2 Supply of 11 kV 3C x 120 Sq.mm XLPE
Cable & Laying of cable including cost
of Sand & Bricks
Mtr 120 120
8.3 Outdoor type cable termination Kit for
3C x 120 Sq.mm XLPE Cable
Nos. 2 2
8.4 Outdoor type cable termination Kit for
3C x 400 Sq.mm XLPE Cable
Nos. 2 2
9 33KV Lightning Arrestor,
30KV,10KA< Single Phase. (1set=3Nos
Set 1
1
10 11KV AB Switch, 630A Nos. 2 2
11 GI Structure for 11KV AB Switch Nos. 2 2
12
Making of 11 kV cable box mounted
with switchgear & transformers Nos. 4 4
Total
1
2
3
4
5
6
7
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F &
I
charges
incl. any
tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=(
5X12)14 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Inspection of the Sub-stations for
Renovation & Modernisation & obtain
JSEB approval for the same, dismantling
of 33KV Isolators, Damaged Insulators,
AB Switches, LAs, Bus, Control cable,
Earthing etc as applicable, removing,
loading, transportation, unloading,
handing over the same to JSEB identified
store including proper stacking and
obtain JSEB Approval to carry out the
Renovation & Modernisation of PSSs
including painting of all iron materials as
per TS. [Consisting of but not limited to
the following items, subject to site
requirement]
1 Reconditioning of power transformers
including filteration, toping of wire,
Changing of Gasket, Meggering etc No.
3
2 Supply & Erection of following
Equipments, Insulators etc to replace
existing Damaged equipments
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Sl.
No.Description of Items Unit
Qty.
per
PSS
Total
Qty.
for
3
PSSs
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Supply & Erection Schedule (17) Renovation & Modernization of Existing 33/11kV substations with replacement of swtichgear in existing substations-03 Nos.
of PSS @ Deoghar
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
2a 33KV isolator (850 A) No. 3
2b 33KV isolator (600 A) No. 2
2c 33KV Post insulator along with hardware
& accessories No. 5
2d 11KV Post insulator along with
hardware & accessories No. 2
2e 11 kV AB Switch ( 850A ) No. 4
2f 11 kV AB Switch ( 630A ) No. 6
2g Lightening Arrestors 11KV No. 2
2h Lighting of yard ( High pressure sodium
Vapour Lamp with fitting ) Lot 1
2i Replacement of Bus from Wolf to Zebra
with Connector mtr 50
2j Different type of connector ( AB
Switch/Isolator, Conductor to pipe, Pipe
to Pipe, etc.) Lot 1
3 Painting of Structures and Equipments Lot 1
4 Patch repairing of cable trench and
control room Lot 1
5 Earthing of Substation Structure No. 5
6 Earthing of Starpoint of CT for 33 kV
and 11 kV No. 6
7 Control Cable Supply & Laying
7a 2.5 mm 12 Core Cu wire (armoured)
1.1kv class for laying with fixing of lugs,
ferrules & termination sockets as per
approved cable schedule. mtr 100
7b 2.5 mm 4 Core Cu wire (armoured) 1.1kv
class for laying with fixing of lugs,
ferrules & termination sockets as per
approved cable schedule. mtr 200
1
2
3
4
5
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
All fabricated material such as clamps, channels etc. shall be galvanized
6
7
8
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB Stores
including proper stacking.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories components parts etc.associated with these works/ items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per unit)
1 2 3 4 5 6 7 8 9 10 11
12=(7+
8+9+10
+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Sl.
No.Description of Items Unit
Qty.
per
VCB
Total
Qty.
for
3VC
Bs.
Mode of
Transaction
(Direct or
Bought out
item (D/ BO)
Supply Scheule
Supply & Erection Schedule (18) : Design , Supply & Erection of 33 kV Motorised VCB/SF6 Breaker with CT & CR Panel to replace existing 33KV VCB & its accessories of all PSSs of
Deoghar Town - Total Qty 3 Nos.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit
FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage of following materials
for Installation of New 33 kV Motorised
VCB/SF6 Breaker with CT & CR Panel to
replace existing 33KV VCB & its
accessories complete as per TS. Inspection
of the Sub-station for erection of 33 KV
VCB obtain JSEB's approval for the same,
dismantling of existing VCB,CT,C&R
Panel and other accessories as applicable,
removing, loading, transportation,
unloading, handing over the same to JSEB
identified store including proper stacking
and to carry out the erection of 33 KV
VCB along with other associate work
including painting of all iron materials as
per TS. [Consisting of but not limited to the
following items, subject to site
requirement]
Supply, Providing foundation, Erection,
Testing & commissioning of following
equipments
1 36KV, 1250 A, (25KA S.C. rating) for 3
sec, 3-Ph, Outdoor type Motorised
Vacuum Circuit Breaker/ SF6 Breaker
(with 30V DC tripping/closing coil and
associated control) along with marshalling
box, terminal connectors, VCB/SF6
Breaker Structure and required accessories
complete as per applicable TS (Wherever
desirable)
No. 1 3
2 33KV Control & Relay panel for
individual control of Single Power
Transformer (suitable for 30 V DC
tripping/closing coil and associated control)
along with E/F, O/C & Diiferential relays,
Static energy meter (class 0.5 with
communication port) , Mimic Diagram,
Voltmeter, Ammeter etc. as per TS.
No. 1
3
3 33KV, 1-PH, 25KA for 3 sec. (800-400-
200/ 1-1 -1 A) outdoor type Current
Transformer having three core along with
terminal connectors, junction box and
required accessories etc. complete as per
applicable TS ( 1 set = 3 nos.)
Set 1
3
4 Supporting structure for CT Set 1 3
5 Modifications/Alteration to foundation of
VCB, C&R Panel, CT structures.
Lot 13
TOTAL
1
2
3
4
5
6
7
8
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage of following
materials for Installation of New 11 kV
Motorised VCB/SF6 Breaker with CT &
CR Panel to replace existing 11KV VCB
& its accessories complete as per TS.
Inspection of the Sub-station for erection
of 11 KV VCB obtain JSEB's approval
for the same,
dismantling of existing VCB,CT,C&R
Panel and other accessories as
applicable, removing, loading,
transportation, unloading, handing over
the same to JSEB identified store
including proper stacking and to carry
out the erection of 11 KV VCB along
with other associate work including
painting of all iron materials as per TS.
[Consisting of but not limited to the
following items, subject to site
requirement]
Supply Scheule
Description of Items Unit
Qty.
per
VCB
Total
Qty.
for 6
VCBs.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Schedule (19) Replacement of 11 KV VCB,C&R Panel CT etc of all 33/11KV PSSs @ Deoghar
Erection Scheule
Total
Value of
Supply
and
Erection
Unit Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Sl.
No.
Supply, Providing foundation, Erection,
Testing & commissioning of following
equipments
1 11KV, 350MVA, (25KA S.C. rating) for
3 sec, 3-Ph, Outdoor type Motorised
Vacuum Circuit Breaker/SF6 Breaker
(with 30V DC tripping/closing coil and
associated control) along with
marshalling box, terminal connectors,
VCB Structure and required accessories
complete as per applicable TS
(Wherever desirable)
No. 1
6
2 11KV Control & Relay panel for
individual control of Power Transformer
(suitable for 30 V DC tripping/closing
coil and associated control) along with
E/F, O/C & Diiferential relays, Static
energy meter (class 0.5 with
communication port) , Mimic Diagram,
Voltmeter, Ammeter etc. as per TS.
No. 1
6
3 11KV, 1-PH, 25KA for 3 sec. (1200-600-
300/ 1-1 -1 A) outdoor type Current
Transformer having three core along
with terminal connectors, junction box
and required accessories etc. complete as
per applicable TS ( 1 set = 3 nos.)
Set 1
6
4 Supporting structure for CT Set 1 6
5
Modifications/Alteration to foundation
of VCB, C&R Panel, CT structures. Lot 1 6
Total
1
2
3
4
5
6
7
8
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works/ items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 11
12=(7+
8+9+10
+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage of following materials
for extension of 11KV Bays @ Daburgram,
Baidyanathpur & college PSS as per TS.
Inspection of the PSSs to identify the section
which need to be Augmented. Obtain JSEB's
approval for the same including painting of
all iron materials as per TS. (Assorted)
[Consisting of but not limited to the
following items, subject to site requirement]
Supply & Erection/fixing of the following
Supply & Erection Schedule (20) Design & Supply of 11kV New Bay Extension for New Bifurcated Feeders at existing power substations Total Qty;- 06 Nos.
Sl.
No.
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit
FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Supply Scheule Erection Scheule
Description of Items Unit
Qty.
Per
Bay.
Total
Qty.
for 6
Bays.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
1
11 kV VCB FDR 350 MVA,
400/200/5A,110V AC, C& R Panel, TVM
Meter (30V DC tripping/closing coil) and
other accessories etc as per applicable TS
(Incomer Feeder / Bus coupler Panel).
Set 1.0 6
2
Outgoing 11kV Double Pole structure of SP-
23 complete with Top & dropper channel &
angle for holding cable & necessary clamps
etc. & Painting of structure
Nos. 1.0 6
3 11 KV Pin insulator with GI pin with nut No. 3.0 18
411 kv. Lightening arrester(9 KV 5 KA 1
Phase )Set 1.0 6
5 11 KV Isolator (600 A.) Set 1.0 6
6Disc. ins for 11Kv Swing bus & Take off
structureNo. 3.0 18
7 PG Clamp for DOG No. 6.0 36
8 M.S.Nuts and Bolts (Assorted) supply only Kg 5.0 30
9 Cable trench for control kiosks L.S. 1.0 6
10 11kV XLPE Cable 3x120sqmm Mtr. 70.0 420
11Heat shrinkable Cable jointing kit for 11kV
XLPE 3x120sqmm.(Indoor)No. 1.0 6
12Heat shrinkable Cable jointing kit for 11kV
XLPE 3x120sqmm.(Outdoor)No. 1.0 6
13GI Pipe 3inch dia for protection of 11kV
CableMtr. 25.0 150
14 Concreting of Structures with 1:3:6 Cmt 1.3 7.80
1
2
3
4 Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
5
6
Bidder shall quote Unit handling, erection & commissioning charges/labour charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be
specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+1
7)
Design, Engineering,
Manufacturing, Assembly,
Inspection, Testing at
manufacturer's works before
Despatch, Packing, Supply,
Delivery at site and subsequent
Storage of following materials
for Installation of HT Fixed
Capacitor Bank 2.4 MVAR
capacity with accessories
complete as per TS. Inspection
of Sub Station & obtain approval
from JSEBfor installing 2.4
MVAR 11KV Fixed Capacitor
along with other associate work
including painting of all iron
materials as per TS. [Consisting
of but not limited to the
following items, subject to site
requirement]
Sl.
No.Description of Items Unit
Qty.
per
Capacitor
Bank
Total
Qty. for 6
Nos.
Capacitor
banks
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Supply & Erection Schedule (21) Installation of 2.4 MVAR HT Fixed Capacitor to 33KV PSSs @ Deoghar Total Quantity:- 6Nos
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Supply & Erection, Testing &
Commissioning of the following
1
12KV, 1250 A, 3-Ph,.Outdoor
type Vacuum Circuit Breaker/
SF6 Breaker (30 V DC
tripping/closing coil) and other
accessories etc as per applicable
TS .
No 1 6
211 KV Control panel complete
set No 1 6
3Structure for installation of
11KV/110V PTNo 1 6
4Structure for installation of
11KV CTNo 3 18
5 11KV/110Volt PT Set 1 6
611KV CTs 800-400-200A/5-5A
No 3 18
7 Out Door Capacitor Bank
2.4MVAR capacity set complete
No. 1 6
8 Structure for Capacitor Bank No 1 6
9 Reactor Voltage Transformer No 1 6
1011 KV H.T. Cable XLPE 3X70
Sqmm..Mtr. 50 300
11 11 KV Cable Box kit No. 4 24
12 Rail Pole 13 mar. Long No. 2 12
13 Stone Pad 300x300x75 mm No. 2 12
1433 kV top channel 125x65mm
3.2 mtr. LongNo. 1 6
15 Cross bracing set 50x50x6 mm Set 1 6
1633 kV Pin Insulator with Pin &
nutNo 3 18
17 E-clamp No. 3 18
1833 kV Disc Insulator with
Hardware Fittings Set 6 36
19Earth wire clamp for 13 mtr.
Long Rail Pole No. 1 6
20PP & Clamp for 13 mtr. Long
Rail PoleNo. 2 12
21Bracing clamp for Rail pole (Top
& Bottom)No. 4 24
22 Stay clamp for S T pole No. 6 36
23 Number plate with clamp No. 1 6
24 Danger board No. 1 6
25 PG clamp for Panther conductor No. 12 72
26Ms Bolts & nuts off size Supply
onlyKg. 4 24
27Aluminium binding wire(5mm
dia)Kg. 5 30
28 Aluminum Binding tape Kg. 5 30
29 Aluminum paint Ltr 5 30
30 Red oxide paint Ltr 5 30
31Earthing Pipe 40mm Dia 2mtr
longno 1 6
32 GI wire 6SWG Kg. 1 6
33 Barbed wire Kg. 4 24
34 Rod Type Earthing complete
including GI wire No 6No 1 6
35Sty Sets complete (1800*20mm)
with Stay Wire 7/10swgNo 6 36
36Cement Concreting 1:3:6 Ratio
of Poles including kicking blockCuM 0.678 4.07
37 Concreting of Stays (1:3:6 Ratio) No 6 36
38Concreting of Structures of
Capacitor Bank,CTs & PTLot 1 6
1
2
3
4
5
6
7
8
All fabricated material such as clamps, channels etc. shall be galvanized
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
9 Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to be
specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Supply Scheule
Description of Items Unit
Qty.
per
Capacitor
Bank
Total
Qty. for
4Nos of
Capacitor
Banks
DSSs
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply & Erection Schedule (22) Installation of 3.6 MVAR HT Fixed Capacitor to 33KV PSS @ Deoghar. Total Quantity: - 04 Nos.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Sl.
No.
Design, Engineering,
Manufacturing, Assembly,
Inspection, Testing at
manufacturer's works
before Despatch, Packing,
Supply, Delivery at site and
subsequent Storage of
following materials for
Installation of HT Fixed
Capacitor Bank 3.6 MVAR
capacity with accessories
complete as per TS.
Inspection of Sub Station &
obtain approval from
JSEBfor installing
3.6MVAR 11KV Fixed
Capacitor along with other
associate work including
painting of all iron
materials as per TS.
[Consisting of but not
limited to the following
items, subject to site
requirement]
Supply & Erection, Testing
& Commissioning of the
following
1
12KV, 1250 A, 3-
Ph,.Outdoor type Vacuum
Circuit Breaker / SF6
Breaker (30 V DC
tripping/closing coil) and
other accessories etc as per
applicable TS (Incomer
Feeder / Bus coupler Panel).
No 1 4
2
11 KV Control panel
complete set & CT and PT
structure for Capacitor
Bank.
No 1 4
3Structure for installation of
11KV/110V PTNo 1 4
4Structure for installation of
11KV CTNo 3 12
5 11KV/110Volt PT Set 1 4
611KV CTs 800-400-200A/5-
5ANo 3 12
7Out Door Capacitor Bank
3.6MVAR capacity .No. 1 4
8Structure for Capacitor
BankNo 1 4
9Reactor Voltage
TransformerNo 1 4
1011 KV H.T. Cable XLPE
3X70 Sqmm..Mtr. 50 200
11 11 KV Cable Box kit No. 4 16
12 Rail Pole 13 mar. Long No. 2 8
13 Stone Pad 300x300x75 mm No. 2 8
1433 kV top channel
125x65mm 3.2 mtr. LongNo. 1 4
15Cross bracing set 50x50x6
mmSet 1 4
1633 kV Pin Insulator with
Pin & nutNo 3 12
17 E-clamp No. 3 12
1833 kV Disc Insulator with
Hardware Fittings Set 6 24
19Earth wire clamp for 13 mtr.
Long Rail Pole No. 1 4
20PP & Clamp for 13 mtr.
Long Rail PoleNo. 2 8
21Bracing clamp for Rail pole
(Top & Bottom)No. 4 16
22 Stay clamp for Rail pole No. 6 24
23 Number plate with clamp No. 1 4
24 Danger board No. 1 4
25PG clamp for Panther
conductor No. 12 48
26Ms Bolts & nuts off size
Supply OnlyKg. 4 16
27Aluminium binding
wire(5mm dia)Kg. 5 20
28 Aluminum Binding tape Kg. 5 20
29 Aluminum paint Ltr 5 20
30 Red oxide paint Ltr 5 20
31Earthing Pipe 40mm Dia
2mtr longno 1 4
32 GI wire 6SWG Kg. 1 4
33 Barbed wire Kg. 4 16
34
Rod Type Earthing
complete including GI wire
No 6
No 1 4
35
Sty Sets complete (1800*
20mm) with Stay Wire
7/10swg
No 6 24
36
Cement Concreting 1:3:6
Ratio of Poles including
kicking block
CuM 0.678 2.71
37Concreting of Stays (1:3:6
Ratio)No 6 24
38Concreting of Structures of
Capacitor Bank,CTs & PTLot 1 4
1
2
3
4
5
6
7
8
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Bidder shall quote Erection prices for the above items. Erection Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering,
Manufacturing, Assembly,
Inspection, Testing at manufacturer's
works before Despatch, Packing,
Supply, Delivery at site and
subsequent Storage of following
materials for providing Gaurding of
11 kV Line (11KV Line/ LT/ Road
crossing) as per TS. Inspection of
the line to identify the section which
need to be provided with Gaurding,
obtain JSEB's approval for the same
and to carry out the Gaurding work
of 11 kV line including painting of
all iron materials as per TS.
(Assorted) [Consisting of but not
limited to the following items,
subject to site requirement]
Supply Scheule
Description of Items Unit
Qty.
per
Guarding
Total
Qty.
35
Nos.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply & Erection Schedule (23) Guarding of 11 kV Line (11KV Line/ LT/ Road crossing) - Total Qty 35 Nos.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Sl.
No.
Supply & Fixing/Erection, Testing
& Commissioning of the following
1 Guarding Channel 100x50mm
3.75mtr
Nos. 2 70
2 Eye Bolt 16x190mm length kg. 5 175
3 PP & Clamp with Nut Bolt for Pole Nos. 4 140
4 8 SWG GI wire for guard wires and
lacings
kg. 9 315
5 6 SWG GI wire for guard wires and
lacings
kg. 41 1435
6 Nut Bolt off Size Supply only Kg. 2 70
7 AL Paint Ltr 1 35
8 Red Oxide Paint Ltr 5 175
1
2
3
4
5
6
7
All fabricated material such as clamps, channels etc. shall be galvanized
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Bidder shall quote prices for the above items. Prices of all accessories,components, parts etc.associated with these works/ items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
TOTAL
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes, duties
& Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+1
5)
17=(5X16
)
18=(13+
17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before
Despatch, Packing, Supply, Delivery
at site and subsequent Storage for
Supply of Trolley ( New Mobile
service Centre ) fitted with 250
KVA DTR & wiring accessoriesas
per TS. [Consisting of but not limited
to the following items, subject to site
requirement]
Supply & Fixing/Erection, Testing &
Commissioning of the following
1 Fabricated TRAILOR with 4tyre
Wheels to house 250KVA
Distribution Transformer
No 1 1.00
2 3*95 mm² 11KV class XLPE Cable. KM 0.01 0.01
Sl.
No.Description of Items Unit
Qty.
per
Trolley
Total
Qty.
1 No.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Supply & Erection Schedule (24) Supply of Trolley ( New Mobile service Centre) fitted with 250 KVA DTR & wiring accessories. - Total Qty. 01 Nos.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
3 Heat shrinkable Termination kits
suitable for 3*95 mm²Xlpe Cable
(out door)
No 2 2.00
4 250 KVA ,11KV/433V Distribution
Transformer self protected.
No 1 1.00
5 250 KVA Distribution Box with
MCBs.
No 1 1.00
6 LT PVC cable 3.5*95mm² 1.1KV
class
KM 0.1 0.10
7 Misc materials such as MS Channels
&Angles of various sizes, Bolts
&Nuts.
Lot 1 1.00
Total
1
2
3
4
5
6
7
8
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+
15)
17=(5X1
6)
18=(13
+17)
Design, Engineering, Manufacturing,
Assembly, Inspection, Testing at
manufacturer's works before Despatch,
Packing, Supply, Delivery at site and
subsequent Storage for Providing
Electronic Energy Meters S phjase 5-30A
in place of existing Electro mechanical
Energy meters ( S phase). Inspection of
the Installations to identify the
Installation which need to be replaced by
Electronic energy Meters, obtain JSEB's
approval for the same. Dismantling of
existing Energy Meter and other
accessories as applicable, removing,
loading, transportation, unloading,
handing over the same to JSEB identified
store including proper stacking and to
carry out the replacement of Meter along
with other associated works as per TS.
[Consisting of but not limited to the
following items, subject to site
requirement]
Total
Value of
Erection
includin
g Service
Tax
(INR)
Sl.
No.
Total
Qty. of
Installation
s
9070 Nos.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Description of Items Unit
Qty.
per
Installatio
n
Supply & Erection Schedule (25) Replacement of 1-Ph EM/ Defective Energy Meter by Electronic Energy meters - Total Quantity - 9070Nos.
Erection Scheule
Total
Value
of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the price
at Column (7) in INR Total Unit
FOR Dest.
Supply
Prices with
all taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
includin
g service
tax
(INR)
Supply & Fixing/Erection, Testing &
Commissioning of the following
1 Electronic Energy Meter S Ph 5-30A with
data Down loading facility
No. 1 9070
2 MCCB (Single Phase 5-30 Amp) No. 1 9070
3 Poly carbonate Meter Box With Suitable
Wooden Board
No. 1 9070
TOTAL
1
2
3
4
5
6
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB
Stores including proper stacking.
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR/
per
unit)
Other
Taxes,
duties &
Levies (to
be
specified
Clearly)
(INR/ per
unit)
Unit F
& I
charges
incl.
any tax
(INR/
per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=(14+
15)
17=(5X1
6)
18=(13+
17)
Design, Engineering, Manufacturing, Assembly,
Inspection, Testing at manufacturer's works before
Despatch, Packing, Supply, Delivery at site and
subse-quent Storage for Providing Electronic
Energy Meters 3 phjase 10-40A in place of existing
Electro mechanical Energy meters (1/3 phase).
Inspection of the Installations to identify the
Installation which need to be replaced by
Electronic energy Meters, obtain JSEB's approval
for the same. Dismantling of existing Energy
Meter and other accessories as applicable,
removing, loading, transpor-tation, unloading,
handing over the same to JSEB identified store
including proper stacking and to carry out the
replacement of Meter along with other associated
works as per TS. [Consisting of but not limited to
the following items, subject to site requirement]
Supply & Fixing/Erection, Testing &
Commissioning of the following
1 Electronic Energy Meter 3 Ph 10-40A with data
Down loading facility
No. 1 3762
Supply & Erection Schedule (26) Replacement of 3-Ph EM/ Defective Energy Meter by Electronic Energy meters - Total Quantity - 3762 Nos.
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable
for transaction between bidder &
JSEB and not included in the
price at Column (7) in INR Total Unit
FOR Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Sl.
No.Description of Items Unit
Quantity
per
Installation
Total
Quantity of
Installations
3762 Nos.
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
2 MCCB (Three Phase 20-30 Amp) No. 1 3762
3 Poly carbonate Meter Box With Suitable Wooden
Board
No. 1 3762
TOTAL
1
2
3
4
5
6
7
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall arrange for removing,loading & transportation of all dismantled / released Materials/Equipments during the execution of work unloading & handing over them to identified JSEB Stores
including proper stacking.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All fabricated material such as clamps, channels etc. shall be galvanized
The special fabrication items such as channels, cross arms for which no rate has been obtained from the contractor, the rate will be governed by per kg weight of the fabricated item
Excise
Duty
(INR/
per
unit)
Sales
Tax/
VAT
(INR
/ per
unit)
Other Taxes,
duties &
levies (to be
specified
Clearly)(INR
/ per unit)
Unit F & I
charges
incl. any
tax
(INR/ per
unit)
1 2 3 4 5 6 7 8 9 10 1112=(7+8+
9+10+11)
13=
5X1214 15
16=
(14+15)
17=
(5X16)
18=
(13+17)
Supply & Erection Schedule (27) Shifting of Energy Meters provided to Installations having 4sq mm service Line to outside premises. Qty:- 1814 Nos.
Sl.
No.Description of Items Unit
Quantity
per
Installation
Total
Quantity for
1814 Nos of
Installations
Erection Scheule
Total
Value of
Supply
and
Erection
Unit
Ex-
Works
Price
(INR)
Total Taxes & Duties applicable for
transaction between bidder & JSEB
and not included in the price at
Column (7) in INR
Total
Unit FOR
Dest.
Supply
Prices
with all
taxes
(INR/
Unit)
Total
value
of
supply
(INR)
Unit
Erection
Charges
(INR)
Service
Tax
(INR/
Unit)
Unit
Erection
Charges
including
service
tax (INR)
Total
Value of
Erection
including
Service
Tax
(INR)
Mode of
Transaction
(Direct or
Bought out
item (D/
BO)
Supply Scheule
Design, Engineering,
Manufacturing, Assembly,
Inspection, Testing at
manufacturer's works before
Despatch, Packing, Supply,
Delivery at site and subsequent
Storage for Shifting of Energy
Meters fixed inside the premise to
outside premises & to replace
existing service Mains by
Armoured cable. Inspection of the
Installations to identify the
Installation whose meter is fixed
inside the premises of installation
& which need to be shifted, obtain
JSEB's approval for the same.
Dismantling of existing Service
Mains and other accessories as
applicable, removing, loading,
transportation, unloading, handing
over the same to JSEB identified
store including proper stacking and
to carry out the shifting of Energy
Meter along with other associated
works as per TS. [Consisting of but
not limited to the following items,
subject to site requirement]
Supply & Fixing/Erection, Testing
& Commissioning of the following
1 2C*4sq mm PVC Insulated 1.1KV
Class Armoured Alluminium Cable
Mtrs. 25 45350
2 1c*1.5sq mm PVC Insulated
Stranded Copper Cable for Internal
wiring.
Mtrs. 10 18140
3 G.I. Wires : 5.0 mm. (6 SWG) Kg. 6 10884
3 Poly carbonate Meter Box With
Suitable Wooden Board
No. 1 1814
Total
1
2
3
4
5
6
Bidder shall include all the taxes and duties in the quoted prices in column 7 for bought out items only.
Bidder shall quote Unit Freight, storage & Insurance for transit & storage charges for both direct as well as bought out items in column 11.
All clamps and connectors used for Bus will be crimped. All the clamps and connectors connecting the equipments shall be of bolted type.
Bidder shall quote Unit handling, erection & commissioning charges/labor charges including road cutting charges etc if applicable in column 14.
Bidder shall quote Supply & Erection Prices seperately in "Supply schedule" & "Erection Schedule" of the Bid Document
Bidder shall quote prices for the above items. Prices of all accessories,components,parts etc.associated with these works / items are to be included in bidder's quoted prices.
Total Capacity
(in KVA)
500 KVA 250 KVA 200 KVA 150 KVA 100 KVA 63 KVA 25 KVA 16 KVA 10 KVA
1 Ranchi 40 0 1230 0 2443 734 395 288 57 571595 218.92 87.57
2 Jamshedpur 7 6 632 2 2128 553 384 1544 1537 427513 163.74 65.50
3 Dhanbad 6 2 580 2 1790 792 175 172 175 357573 136.95 54.78
53 8 2442 4 6361 2079 954 2004 1769 1356681 519.61 207.84Total
Sl. No.
Location of
assets/
Town/Circle
Description of assets
Value in
Rs. CroreNo. of Distribution Transformers (Capacity in KVA)