supine to prone in one motion - zing · rainbow unicorn sea creatures fancy pants elephants zing...

PRODUCT CATALOG

SUPINE TO PRONE IN ONE MOTION

• Pivot points are in line with the hips, promoting proper alignment in the hips, knees and feet

• Feet maintain the angle with the rest of the legs - no wedges needed and no additional adjustment to the knees or foot plates

• Up to 30 degrees of abduction per leg - accomplished through a single knob

• Promotes musculoskeletal development for children during critical growth years

• Abduction can be adjusted and used throughout the entire positioning range

Zing

True Multi-Position Stander• The MPS and MPS TT allow supine, vertical and prone positioning without flipping foot plates or pads, moving the tray or transferring out and back in the stander

• Smooth transition from a flat-to-load transfer position, supine, vertical and 20 degrees prone - all in one motion, thanks to the unique pivoting action of the Zing MPS and MPS TT

• Provides therapeutic opportunities not possible with other multi-position standers - use prone for head control and when fatigue sets in, simply move to a slight supine position to rest but remain in the standing position

• Frame will only go supine and upright with Prone Position Lockout engaged

True Hip Pivot Leg Abduction

Plenty of Growth• Size 1: Fits children from infancy to 44", and up to 70lbs

• Size 2: Fits children from 40"-60", and up to 154lbs • Can easily grow with the child and adapt to their changing needs

• Many supports, pads and straps are available in multiple sizes

• Comfortable transfer height of 32" makes transfers more manageable as children grow

MPS, Supine, MPS TT(Tilt Table), Supine TT(Tilt Table), Vertical, & Prone The

The Zing line of single and multi position standers were designed to fit the widest range of children and accommodate positioning challenges few other standers can. The Zing line features independent leg abduction up to 30 degrees on each model. The Zing can be configured with a simple padded strapping system to ease set up time in multi-user environments or when more individual positioning and support is required, additional components can be added to fit the users needs.

page 1

Zing MPS-Size 1

Remarkably Modular• Can be configured as a simple stander or fit a child with the most complex needs

• Designed to grow with the child – options can be added as needed

• Great for a multi-user facility or school

Supine Standing

Unique Lift Mechanisms• Dual controls are available allowing angle adjustment by foot pedal or hand control

• Gas Spring Lockout prevents an inadvertent change of position, especially important when around other children

• The Pow'r Up Lift option on Size 2 brings the user to the standing position with the touch of a button

Advantage

Accommodating Contractures• No special modifications are needed to accommodate children with contractures

• Using the multi-adjustable foot plates, multi-adjustable knee pads and the independent calf pads, it is possible to adjust for contractures in one or both sides

Zing Prone-Size 1

page 2

Easy Adjustment• Tool-free adjustment of all components

• Every adjustment can be made with a simple turn of a knob or ratchet handle

Multi-Use Tray• The MPS, Supine, MPS TT and Supine TT feature a multi-use tray that is angle adjustable and swings away either direction

• Tray can remain attached during transfers

• More activities are possible by swinging tray away during standing therapy

Zing TT MPS-Size 2

Supine Lying

ZingMPS, Supine, MPS TT(Tilt Table), Supine TT(Tilt Table), Vertical, & Prone

Health Benefits• Improve/maintain range of motion

• Decrease joint/muscle contractures

• Management of atrophy in the trunk and leg muscles

• Improve strength to trunk and lower extremities

• Decrease muscle spasms

• Promote proper muscle skeleton development

• Improve/maintain bone integrity/skeletal development

• Lessen/manage the progression of scoliosis

• Manage pressure (ulcers) through changing positions

• Improve bowel function and regularity

• Aid in kidney and bladder functions

• Strengthen cardiovascular system and build endurance

• Improve circulation

• Reduce swelling in lower extremities

ProneVerticalSupine

SUPINE TO PRONE

cardio + circula�on

kidney func�on

bowel func�on

contractures

bone strength

reduce swelling

build strength

page 3

MPS Models Size 1 and Size 2

Zing Vertical-Size 1

Supine Standing

Frame Colors

GREEN PURPLE

WHITE ORANGE

SPACE RACE ALL SMILES ANIMALS

RAINBOW UNICORN SEA CREATURES FANCY PANTS ELEPHANTS

Zing MPS TT

page 4

Hygienic Covers• Available in 5 fun patterns for the pelvic, upper body, lateral, head and tray areas

• Prevents stander from getting soiled, especially during feeding

• Easily removed and washable

Supine Standing

Zing Prone-Size 1

Zing MPS-Size 1

MPS (Multi-Position Stander) Supine MPS TT (Tilt Table)

additional specifications at zingstanders.com

The Zing MPS is the only multi-position stander that can seamlessly transition from supine to prone without having to transfer the child out and reposition foot plates, pads or trays.

The Zing Supine features a comfortable 32" transfer height and provides all the positioning and support features of the MPS, minus prone.

The Zing MPS TT is identical to the MPS from a positioning standpoint, but features larger, wider support pads and options for padded strapping, that can simplify transferring and securing children.

70 lbs. (32kg)

up to 44" (112cm)

32"(81cm)

7"-22" (18-56cm)

4" (10cm)

5" (13cm)

55 lbs (25kg)

20"x28" (51x71cm)

Available

0-90°

0°-20°

E0641

Supine, Vertical, Prone

Adjustable, Swing-AwayIndividual Positioning Components,

Padded StrappingAvailable

Available

Flat-to-Load

Yes

70 lbs. (32kg)

up to 44" (112cm)

32" (81cm)

7"-22" (18-56cm)

4" (10cm)

5" (13cm)

55 lbs (25kg)

20"x28" (51x71cm)

Available

0-90°

n/a

E0638

Supine, Vertical



Available

Flat-to-Load

Yes

70 lbs. (32kg)

up to 44" (112cm)

32" (81cm)

7"-22" (18-56cm)

4" (10cm)

5" (13cm)

55 lbs (25kg)

20"x28" (51x71cm)

Available

0-90°

0°-20°

E0641




Available

Flat-to-Load

Yes

Zing-Size 1MPS, Supine, MPS TT(Tilt Table), Supine TT(Tilt Table), Vertical, & Prone

SIZE 1SPECIFICATIONS

page 5

Weight Limit

Height Range*

Transfer Height

Pelvic Support to Foot Plate Range

Upper Body Support Height Range

Knee Pad Depth Range

Weight of Basic Unit

Frame Footprint

30º Independent Leg Abduction

Supine

Prone

HCPCS

Positions

Tray

Support

Dual Control

Gas Spring Lockout

Transfer Aid

Tool Free Adjustment

*Height ranges are approximate, seat to footplate measurements are more accurate measurements to determine the correct size frame.

Zing MPS-Size 1

Supine TT (Tilt Table) Vertical Prone

The Zing Supine TT features the larger pads and padded strapping options of the MPS TT and positioning from flat to load supine to vertical.

The Zing Vertical is a single position stander that features a Padded Quick Strap to ease upright transfers. It's also one of the only vertical standers to offer anatomically correct independent leg abduction.

The Zing Prone is a single position stander but is one of the few tooffer a flat-to-load transfer position at a comfortable height of 32". Prone positioning from 0-90 degrees.

70 lbs. (32kg)

up to 44" (112cm)

32" (81cm)

7"-22" (18-56cm)

4" (10cm)

5" (13cm)

55 lbs (25kg)

20"x28" (51x71cm)

Available

0-90°

n/a

E0638

Supine, Vertical



Available

Flat-to-Load

Yes

70 lbs. (32kg)

up to 44" (112cm)

n/a

7"-22" (18-56cm)

4" (10cm)

5" (13cm)

55 lbs (25kg)

20"x28" (51x71cm)

Available

n/a

n/a

E0638

Vertical

AdjustableIndividual Positioning Components,

Padded Strappingn/a

n/a

n/a

Yes

70 lbs. (32kg)

up to 44" (112cm)

32" (81cm)

7"-22" (18-56cm)

4" (10cm)

5" (13cm)

55 lbs (25kg)

20"x28" (51x71cm)

Available

n/a

0°-90°

E0638

Vertical, Prone



Available

Flat-to-Load

Yes

page 6

B

Centering the Hip (A):The user's hip should be centered in line with the pivot point of the stander ensuring proper hip alignment when using abduction, adjust support components up or down based hip position.

Foot Plate Height (B):Measure the distance from the hip of the user to the bottom of the foot.

Knee Pad Height (C):Measure the distance from the hip of the user to center of the knee.

CFITTING THE ZING

A

Supine Standing

Zing TT MPS-Size 1

Zing MPS (Multi-Position Stander)

Zing SupineSize 1-Options

PA5624, PA5626, PA5628Multi-Adjustable Foot Plates

Adjustable in height. Foot holders and foot straps can be added for more precise positioning of the feet.

PA5536 Platform Foot Plate

Great for transporting stander. Directionally locks one caster while leaving the other three free to swivel.

PA5608 Directional Locking Caster

Locks gas spring in any position from lying down to fully upright, supine and prone positions.

PA5614 Gas Spring Lift Lockout

Mast is the base for support and positioning components and allows for 0-30º of independent leg abduction. Multi-adjustable knee pads or posterior knee pads and multi-adjustable foot plates required for leg abduction.

PA5532 Mast with Leg Abduction

Mast is the base for positioning options including foot plates, knee supports, pelvic supports, upper body supports and head supports.

PA5530 Mast

Comes with four swivel locking casters, foot operated gas spring, mast receiver. MPS base comes with prone position lockout.

PA5520 Zing MPS Base PA5522 Zing Supine Base

Cushioned pad covered with Neoprene®. Pad sizes: PA5562-5"Hx7"W (13x18cm),PA5564-5"Hx9"W (13x23cm).

PA5562 Planar Pad-5"Hx7"WPA5564 Planar Pad-5"Hx9"W

Provides anterior knee support with the strap and posterior knee support with the pad. PA5734 inside width is 3.5" (9cm) and PA5736 inside width is 5" (13cm). Not available with any other knee support options or calf pads.

PA5734 Posterior Knee Pads 3.5" PA5736 Posterior Knee Pads 5"

Multi-adjustable knee pads are adjustable in swivel, height +/-.75" (2cm), PA5556 inside width 2.5" (6cm), PA5558 inside width 3.25" (8cm), PA5729 inside width 4.25" (11cm) and PA5730 inside width 5" (13cm). With a depth range of 5" (13cm).

PA5556, PA5558, PA5729, PA5730Multi-Adjustable Knee Pads

4"x10" (10x25cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure, provides calf/knee stability for user. Fits circumference up to 24" (61cm). Gives support from the back of the calf/knee. Adjustable in height and fore/aft.

PA5550 Calf/Knee Pad with Strap

Velcro® and D-ring adjustment holds feet in alignment with multiple attachment slots for proper foot positioning. Straps measured in length over top of foot, with approximately 1.5" (4cm) of Velcro® overlap.

PA5548 Foot Straps-8"LPT50080 Foot Straps-10"L

Velcro® and D-ring adjustment holds feet securely in place at ankles and toes with multiple attachment slots for proper foot positioning. Straps measured in length over top of foot, with approximately 1.5" (4cm) of Velcro® overlap.

PA5546 Secure Foot Straps-8"LPT50082 Secure Foot Straps-10"L

Use with the platform foot plate, gives added positioning of users feet. Foot holder sizes: PA5540-6"Lx3"W (15x8cm), PA5542-7.75"Lx3.25"W (20x8cm), PA5544-9.75"Lx4"W (25x10cm).

PA5540, PA5542, PA5544Foot Holders for Platform Foot Plate

Keeps the hips in symmetrical alignment. Adjustable from 6"-10" (15-25cm) with fore/aft 4" (10cm). Pad size is 3.5"x3.5" (9x9cm). For planar pads only.

PA5574 Hip Supports

Form to fit pad can be custom fit to the user. Pad sizes: PA5566-5"Hx10"W (13x25cm) PA5570-5"Hx12"W (13x30cm). Not recommended with leg abduction mast.

PA5566 Form to Fit Pad-5"Hx10"WPA5570 Form to Fit Pad-5"Hx12"W

The MPS (multi-position stander) base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring • Mast Receiver with Prone Position Lockout

5"x8" (13x20cm) pad attached to a 2" (5cm) belt, Velcro® belt with a D-Ring closure. Fits circumference up to 24" (61cm).

PA5610 Pelvic Padded Positioning Strap

2" (5cm) wide belt has a Velcro® belt with a D-Ring closure, provides hip stability for user. Fits circumference up to 24" (61cm).

PA3011 Pelvic Positioning Belt

70 lbs(32 kg)

up to

44"

(112

cm)

Foot plates are adjustable forward/aft +/- .75" (2cm) +extra 1.5" (3.8cm), plantar/dorsi +/- 20°, toe-in/toe-out, swivel 30° left/right and in height. Foot holder sizes: PA5624-6"Lx3"W (15x8cm), PA5626-7.75"Lx3.25"W (20x8cm), PA5628-9.75"Lx4"W (25x10cm).

Allows both foot and hand control of the gas spring lift. Push handle PA5594 required.

PA5612 Dual Control

page 7

Size 1The Supine base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring • Mast Receiver

Great for adapting to knee contractures. Gives support from the back of the calf. Adjustable in height with knee pad and fore/aft 4" (10cm) independently. Must order multi-adjustable knee pads.

PA5560 Multi-Adjustable Calf Pads 3.5" PA5678 Multi-Adjustable Calf Pads 4.5"

For multi-adjustable knee pads and posterior pads only.

PA5731 Knee Depth Stop

Neoprene® with camlock adjustment provides anterior trunk support for child.

PT50086 X-Style Chest Vest-9.5"Lx9"W PT50088 X-Style Chest Vest-11"Lx9.5"W

Great for loading and bringing to upright. Works with both planar and form to fit upper body supports. Height and width adjustable.

PA5630 Elbow Stop with Arm Rest

Swing-away tray is accessible in all positions and provides anterior support as user moves from supine to upright and prone positions. Adjustable in depth, height and tray angle. Tray size is 11"Lx19"W (28x48cm).

PA5600 Black Molded Swing-Away Tray-11"Lx19"W

Tray is accessible in all positions and provides anterior support as user moves from supine to upright and prone positions. Adjustable in depth and height. Tray size is 11"Lx19"W (28x48cm).

PA5596 Black Molded Tray-11"Lx19"W

Works as a lateral support, elbow rest and armrest. Great for the supine, upright and prone position. For planar pads only. Height and width adjustable.

PA5580Lateral Supports w/Elbow Stop/Arm Rest

Works as a lateral support and elbow rest. Great for the supine position. For planar pads only.

PA5578 Lateral Supports with Elbow Stop

Keeps the upper torso in symmetrical alignment. Adjustable from 7-11"(18-28cm) with a 3.5" (9cm) height range. Pad size is 3.5"Hx3.5"W (9x9cm). For planar pads only.

PA5576 Lateral Supports

Cushioned pad covered with Neoprene®. Pad sizes: PA5562-5"Hx7"W (13x18cm), PA5564-5"Hx9"W (13x23cm). PA5616-7"Hx7"W (18x18cm), PA5618-7"Hx9"W (18x23cm).

PA5562 Planar Pad-5"Hx7"WPA5564 Planar Pad-5"Hx9"WPA5616 Planar Pad-7"Hx7"WPA5618 Planar Pad-7"Hx9"W

Washable slip on cover available in five different patterns. For planar pads PA5562 and PA5564 and form to fit pads PA5566 and PA5570.

PA3028, PA3029, PA3030, PA3032Hygienic Covers

Washable slip on cover available in five different patterns. For PY5626, PY5628 and PA5586.

PA3035, PA3036, PA3037 Hygienic Covers

Cushion size 5"Hx10"W (13x25cm). Depth range is -2.5" (6cm) to +1.5" (4cm) from backrest. Maximum height from top of upper body pad is 8" (20cm).

PA5586 Head Support-Form to Fit

Cushion size is 5"Hx8"W (13x20cm), 6"Hx10"W (15x25cm). Depth range is -2.5" (6cm) to +1.5" (4cm) from backrest. Maximum height from top of upper body pad is 8" (20cm).

PY5626 Head Support-5"Hx8"W PY5628 Head Support-6"Hx10"W

Washable slip on cover available in five different patterns. For lateral supports PA5576.

PA3039 Hygienic Covers for Lateral Supports

5"x8" (13x20cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 24" (61cm).

PA5610Upper Body Padded Positioning Strap

Holds the assembly tools provided with the stander. Attaches to unit with Velcro® straps.

P80809 Tool Pouch

Makes pushing the stander easier for the caregiver and also aids in lifting andlowering the child. Required for dual control.

PA5594 Push Handle

Provides additional arm and hand support and alignment. Easily movable for precise arm positioning. Attaches with suction cups. Clear tray required.

PNG50042 Hand Grips

Washable slip on cover is padded and available in five different patterns.

PA3038 Hygienic Padded Cover

Forearm wings give additional area to rest arms when in standing position.

PA5606 Forearm Wings-Clear Tray


PA5604 Forearm Wings-Black Molded Tray


PA5602 Clear Swing Away Tray-11"Lx19"W

Magnetic angle locater can be utilized for standing progress and leg abduction.

P80246 Angle Locator

Form to fit pad with built in lateral support that can be custom fit to the user. Pad size for PA5568-5"Hx10"W (13x25cm), PA5620-7"Hx10"W (18x25cm), PA5572-5"Hx12"W (13x30cm) and PA5622-7"Hx12"W. (18x30cm).

PA5568 Form to Fit Pad-5"Hx10"WPA5620 Form to Fit Pad-7"Hx10"W PA5572 Form to Fit Pad-5"Hx12"WPA5622 Form to Fit Pad-7"Hx12"W

page 8

Washable slip on cover available in five different patterns. For planar pads PA5562, PA5564, PA5616, PA5618 and form to fit pads PA5568, PA5572, PA5620, PA5622.

PA3028, PA3029, PA3045, PA3046, PA3031, PA3033, PA3047, PA3048 Hygienic Covers

Keeps the upper torso in symmetrical alignment. Adjustable from 7-11" (18-28cm) with a 3.5" (9cm) height range. Pad size is 4"Hx6"W (10x15cm)-Curved Pad 4"Hx6.25"W (10x16cm)-Flat Pad. For planar pads only.

PA5743 Lateral Supports with Flat PadsPA5744 Lateral Supports with Curved Pads

Washable slip on cover available in five different patterns. For lateral supports PA5743 and PA5744.

PB3049 Hygienic Covers for Lateral Supports


PA5522 Zing Supine TT Base PA5520 Zing MPS TT Base


Adjustable in height. Foot holders and foot straps can be added for more precisepositioning of the feet.






Mast is the base for support and positioning components and allows for 0-30º of independent leg abduction. Multi-adjustable knee pads, leg supports, or posterior knee pads and multi-adjust-able foot plates required for leg abduction.


Mast is the base for support and positioning components.

PA5632 Mast

4"x6" (10x15cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 15" (38cm). Adjustable in height. For leg supports PA5644, PA5646, PA5648.

PA5666, PA5668, PA5670 Knee Strap



Washable slip on cover available in five different patterns. For planar pads PA5644, PA5646, PA5648.


Cushioned Neoprene® pad for leg support. Pad sizes:PA5644-4"Hx6"W (10x15cm)PA5646-6"Hx6"W (15x15cm)PA5648-8"Hx6"W (20x15cm)

PA5644, PA5646, PA5648Leg Support Planar Pads







Great for adapting to knee contractures. Gives support from the back of the calf. Adjustable in height with knee pad and fore/aft -1"-4" (-2.5-10cm) independently. Must order multi-adjustable knee pads.

PA5560 Multi-Adjustable Calf Pads 3.5" PA5678 Multi-Adjustable Calf Pads 4.5"


PA5556, PA5558, PA5729, PA5730Multi-Adjustable Knee Pads

Washable slip on cover available in five different patterns. For planar pads PA5638, PA5640, PA5642.


Cushioned pad covered with Neoprene®. Pad sizes:PA5638-14"Hx14"W (36x36cm)PA5640-16"Hx14"W (41x36cm)PA5642-18"Hx14"W (46x36cm)

PA5638, PA5640, PA5642 Planar Pad



PA5612 Dual Control

page 9

Zing MPS TT(Tilt Table)

Zing Supine TT(Tilt Table)Size 1-Options

The MPS (multi-position stander) TT base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring • Mast Receiver with Prone Position Lockout

The Supine TT base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring • Mast Receiver

70 lbs(32 kg)

up to

44"

(112

cm)

Size 1

Provides anterior knee support with the strap and posterior knee support with the pad. PA5734 inside width is 3.5" (9cm) and PS5736 inside width is 5" (13cm). Not available with any other knee support options or calf pads.

PA5734 Posterior Knee Pads 3.5" PA5736 Posterior Knee Pads 5"



Cushion size is 5"Hx8"W (13x20cm), 6"Hx10"W (15x25cm). Depth range is -2.5" (6cm) to +1.5" (4cm) from backrest. Maximum height from top of upper body pad is 8" (20cm).

PY5626 Head Support-5"Hx8"W PY5628 Head Support-6"Hx10"W

Washable slip on cover available in five different patterns. For lateral supports PA5745, PA5746, PA5747 and PA5748.


Washable slip on cover for tray is padded and available in five different patterns.

PA3038 Hygienic Padded Tray Cover






PT50086 X-Style Chest Vest-9.5"Lx9"WPT50088 X-Style Chest Vest-11"Lx9.5"W


PA5674Upper Body Padded Positioning Strap

Keeps the upper torso in symmetrical alignment. PA5652 Adjustable from 4"-8" (10-20cm), PA5654 Adjustable from 7"-11" (18-28cm) with a 3.5" (9cm) height range.Pad size is 3.5"Hx3.5"W (9x9cm).

PA5652 Lateral Supports-4"-8" Range Square PadsPA5654 Lateral Supports-7"-11" Range Square Pads

5"x8" (13x20cm) pad attached to a 2" (5cm) belt. Fits circumference up to 24" (61cm).



PA3062 Pelvic Positioning Strap

Keeps the hips in symmetrical alignment. Adjustable from 6"-10" (15-25cm) with fore/aft 4" (10cm). Pad size is 3.5"x3.5" (9x9cm).

PA5636 Hip Supports Forearm wings give additional area to rest arms when in standing position.



PA5602 Clear Swing Away Tray-11"Lx19"W


PA5600 Black Molded Swing-Away Tray-11"Lx19"W



Washable slip on cover available in five different patterns. For head supports PA5650, PY5626, PY5628, PA5586.

PA3066, PA3035, PA3036, PA3037Hygienic Covers

For use of alternative manufacturer's head supports.

PA5676 Headrest Mounting Bracket






P80809 Tool Pouch


PA5594 Push Handle


PNG50042 Hand Grips

page 10

Keeps the upper torso in symmetrical alignment. PA5745 Adjustable from 4"-8" (10-20cm), PA5746 Adjustable from 7"-11" (18-28cm) with a 3.5" (9cm) height range. Pad size 4"Hx6.25"W (10x16cm).

PA5745 Lateral Supports-4"-8" Range Flat PadsPA5746 Lateral Supports-7"-11" Range Flat Pads

Keeps the upper torso in symmetrical alignment. PA5747 Adjustable from 4"-8" (10-20cm), PA5748 Adjustable from 7"-11" (18-28cm) with a 3.5" (9cm) height range. Pad size 4"Hx6"W (10x15cm).

PA5747 Lateral Supports-4"-8" Range Curved PadsPA5748 Lateral Supports-7"-11" Range Curved Pads

Cushioned Neoprene® pad for head support. Pad size 8"Hx8.5"W (21x22cm).

PA5650 Head Support-Planar Pad







PA5530 Mast

Comes with four swivel locking casters and a mast receiver.

PA5524 Zing Vertical Base

For multi-adjustable knee pads only.PA5731 Knee Depth Stop

4"x6" (10x15cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 15" (38cm). Adjustable in height. For PA5688, PA5690, PA5727 and PA5728.

PA5726 Knee Strap


PA5688 PA5690, PA5727, PA5728Multi-Adjustable Knee Pads










PA5574 Hip Supports

Form to fit pad can be custom fit to the user. Pad sizes: PA5566-5"Hx10"W (13x25cm) PA5570-5"Hx12"W (13x30cm).


The Vertical base includes: • Four Swivel Locking Casters • Mast Receiver





Washable slip on cover available in five different patterns. For planar pads PA5562, PA5564, PA5616, PA5618.

PA3028, PA3029, PA3045, PA3046 Hygienic Cover

5"x8" (13x20cm) pad attached to a 2"(5cm) belt has a airline style buckle for quick closure. Fits circumference up to 24"(61cm).

PA3093 Padded Quick Strap

2" (5cm) wide belt has a airline style buckle for quick closure, provides hip stability for user. Fits circumference up to 24" (61cm).

PA3092 Quick Strap




page 11

Zing Vertical

Size 1-Options

70 lbs(32 kg)

up to

44"

(112

cm)

Size 1



Keeps the upper torso in symmetrical alignment. PA5702 Adjustable from 4"-8" (10-20cm), PA5704 Adjustable from 7"-11" (18-28cm) with a 3.5" (9cm) height range. Pad size is 3.5"Hx3.5"W (9x9cm). For planar pads only.

PA5702 Lateral Supports-4"-8" Range Square PadsPA5704 Lateral Supports-7"-11" Range Square Pads

Form to fit pad with extra sternum positioning. Built in lateral support that can be custom fit to the user. Pad sizes are: PA5698-7"Hx10"W (18x25cm), PA5700-7"Hx12"W (18x30cm).


Tray provides anterior support. Adjustable in depth, height and tray angle. Tray size is 11"Lx19"W (28x48cm).

PA5716 Multi-Adjustable Black Molded Tray-11"Lx19"W

Tray provides anterior support. Adjustable in depth and height. Tray size is 11"Lx19"W (28x48cm).


Form to fit pad with extra sternum positioning. Built in lateral support that can be custom fit to the user. Pad sizes are: PA5694-5"Hx10"W (13x25cm), PA5696-5"Hx12"W (13x30cm).


Form to fit pad with built in lateral support that can be custom fit to the user. Pad sizes are: PA5566-5"Hx10"W (13x25cm), PA5570-5"Hx12"W (13x30cm).


Cushioned pad covered with Neoprene®. Pad sizes:PA5692-5"Hx5"W (13x13cm)PA5562-5"Hx7"W (13x18cm)PA5564-5"Hx9"W (13x21cm)PA5616-7"Hx7"W (18x18cm)PA5618-7"Hx9"W (18x21cm)

PA5692, PA5562, PA5564, PA5616, PA5618 Planar Pad

Washable slip on cover available in five different patterns. For form to fit pads PA5566 and PA5570.

PA3030, PA3032 Hygienic Cover

Washable slip on cover available in five different patterns. For face apertures PA5706 and PA5708.

PA5710 Hygienic Cover

Pad size is 9"Hx3"W (23x8cm). With a 5" (13cm) or 7" (18cm) range from the upper body support, individual face aperture pads are adjustable. Supports the head.

PA5706 Face Aperture-5"HPA5708 Face Aperture-7"H

Washable slip on cover available in five different patterns. For form to fit pads PA5694, PA5696, PA5698 and PA5700.




Washable slip on cover available in five different patterns. For planar pads PA5692, PA5562, PA5564, PA5616 and PA5618.

PA3084, PA3028, PA3029, PA3045, PA3046 Hygienic Cover




PA5610 Upper Body Padded Positioning Strap








PA5718 Multi-Adjustable Clear Tray-11"Lx19"W

Makes pushing the stander easier for the caregiver.

PA5720 Push Handle for Tray


PNG50042 Hand Grips


P80809 Tool Pouch

Magnetic angle locater can be utilized for leg abduction.


page 12






PA5751 Lateral Supports-4"-8" Range Curved PadsPA5752 Lateral Supports-7"-11" Range Curved Pad






Locks gas spring in any position from lying down to fully upright and supine positions.


Mast is the base for support and positioning components and allows for 0-30º of independent leg abduction. Multi-adjustable knee pads and multi-adjustable foot plates required for leg abduction.



PA5530 Mast

Comes with four swivel locking casters, foot operated gas spring and a mast receiver.

PA5522 Zing Prone Base



4"x6" (10x15cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 15" (38cm). Adjustable in height. For PA5688, PA5690, PA5727 and PA5728.

PA5726 Knee Strap


PA5688 PA5690, PA5727, PA5728Multi-Adjustable Knee Pads










PA5574 Hip Supports

Form to fit pad can be custom fit to the user. Pad sizes: PA5566-5"Hx10"W (13x25cm )PA5570-5"Hx12"W (13x30cm).


The Prone base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring • Mast Receiver





2" (5cm) wide belt has a airline style buckle for quick closure, provides hip stability for user. Fits circumference up to 24" (61cm).

PA3092 Quick Strap



PA5725 Dual Control

page 13

Zing Prone

Size 1-Options

70 lbs(32 kg)

up to

44"

(112

cm)

Size 1

Zing Prone


Keeps the upper torso in symmetrical alignment. PA5702 Adjustable from 4"-8" (10-20cm), PA5704 Adjustable from 7"-11" (18-28cm) with a 3.5" (9cm) height range. Pad size is 3.5"Hx3.5"W (9x9cm). For planar pads only.


Form to fit pad with extra sternum positioning. Built in lateral support that can be custom fit to the user. Pad sizes are: PA5694-5"Hx10"W (13x25cm), PA5696-5"Hx12"W (13x30cm). PA5698-7"Hx10"W (18x25cm), PA5700-7"Hx12"W (18x30cm).

PA5694 Form to Fit Pad-5"Hx10"WPA5696 Form to Fit Pad-5"Hx12"W PA5698 Form to Fit Pad-7"Hx10"WPA5700 Form to Fit Pad-7"Hx12"W


PA5716 Multi-Adjustable Black Molded Tray-11"Lx19"W



Form to fit pad with extra sternum positioning. Built in lateral support that can be custom fit to the user. Pad sizes are: PA5566 5"Hx10"W (13x25cm), PA5570 5"Hx12"W (13x30cm).


Cushioned pad covered with Neoprene®. Pad sizes:PA5692-5"Hx5"W (13x13cm)PA5562-5"Hx7"W (13x18cm)PA5564-5"Hx9"W (13x21cm)PA5616-7"Hx7"W (18x18cm)PA5618-7"Hx9"W (18x21cm)

PA5692, PA5562, PA5564, PA5616, PA5618 Planar Pad



Washable slip on cover available in five different patterns. For planar pads PA5562, PA5564, PA5616, PA5618.


5"x8" (13x20cm) pad attached to a 2"(5cm) belt has a airline style buckle for quick closure. Fits circumference up to 24"(61cm).

PA3093 Padded Quick Strap

Washable slip on cover available in five different patterns. For face apertures PA5706 and PA5708.


Pad size is 9"Hx3"W (23x8cm). With a 5" (13cm) or 7" (18cm) range from the upper body support, individual face aperture pads are adjustable. Supports the head.

PA5706 Face Aperture-5"HPA5708 Face Aperture-7"H

Washable slip on cover available in five different patterns. For form to fit pads PA5694, PA5696, PA5698 and PA5700.




Washable slip on cover available in five different patterns. For planar pads PA5692, PA5562, PA5564, PA5616, and PA5618.

PA3084, PA3028, PA3029, PA3045, PA3046 Hygienic Cover


PB3049 Hygienic Cover for Lateral Supports


PA5610 Upper Body Padded Positioning Strap


PNG50042 Hand Grips




PA5718 Multi-Adjustable Clear Tray-11"Lx19"W

Makes pushing the stander easier for the caregiver and also aids in lifting andlowering the child. Required for dual control. Not available with PA5712.

PA5720 Push Handle for Tray


P80809 Tool Pouch




PA5604 Forearm Wings-Black Molded Tray PA5606 Forearm Wings-Clear Tray

page 14


PA3039 Hygienic Cover for Lateral Supports




PA5751 Lateral Supports-4"-8" Range Curved PadsPA5752 Lateral Supports-7"-11" Range Curved Pad

MPS (Multi-Position Stander) Supine MPS TT (Tilt Table)additional specifications at zingstanders.com

Weight Limit

Height Range*

Transfer Height

Hip to Foot Plate Range

Upper Body Support Height Range

Knee Pad Depth Range

Weight of Basic Unit

Frame Footprint

30º Independent Leg Abduction

Supine

Prone

HCPCS

Positions

Tray

Support

Dual Control

Gas Spring Lockout

Transfer Aid

Tool Free Adjustment

Pow'r Up Lift Option

The Zing MPS is the only multi-position stander that can seamlessly transition from supine to prone without having to transfer the child out and reposition foot plates, pads or trays.

The Zing Supine features a comfortable 31" transfer height and provides all the positioning and support features of the MPS, minus prone.

The Zing MPS TT is identical to the MPS from a positioning standpoint, but features larger, wider support pads and options for padded strapping, that can simplify transferring and securing children.

154 lbs. (70kg)

40"-60" (102-152cm)

31" (79cm)

34" (86cm)

6" (15cm)

7" (18cm)

82 lbs (37kg)

26.75"x39.75" (68x101cm)

Available

0-90°

0°-20°

E0641




Available

Flat-to-Load

Yes

Yes

154 lbs. (70kg)

40"-60" (102-152cm)

31" (79cm)

34" (86cm)

6" (15cm)

7" (18cm)

82 lbs (37kg)

26.75"x39.75" (68x101cm)

Available

0-90°

n/a

E0638

Supine, Vertical



Available

Flat-to-Load

Yes

Yes

154 lbs. (70kg)

40"-60" (102-152cm)

31" (79cm)

34" (86cm)

6" (15cm)

7" (18cm)

82 lbs (37kg)

26.75"x39.75" (68x101cm)

Available

0-90°

0°-20°

E0641




Available

Flat-to-Load

Yes

Yes

Zing-Size 2MPS, Supine, MPS TT(Tilt Table), Supine TT(Tilt Table), & Prone

SIZE 2SPECIFICATIONS

page 15

*Height ranges are approximate, seat to footplate measurements are more accurate measurements to determine the correct size frame.

Zing MPS-Size 2

Supine TT (Tilt Table) Prone

The Zing Supine TT features the larger pads and padded strapping options of the MPS TT and positioning from flat to load supine to vertical.

The Zing Prone is a single position stander but is one of the few tooffer a flat-to-load transfer position at a comfortable height of 31". Prone positioning from 0-90 degrees.

154 lbs. (70kg)

40"-60" (102-152cm)

31" (79cm)

34" (86cm)

6" (15cm)

7" (18cm)

82 lbs (37kg)

26.75"x39.75" (68x101cm)

Available

0-90°

n/a

E0638

Supine, Vertical



Available

Flat-to-Load

Yes

Yes

154 lbs. (70kg)

40"-60" (102-152cm)

31" (79cm)

34" (86cm)

6" (15cm)

7" (18cm)

82 lbs (37kg)

26.75"x39.75" (68x101cm)

Available

n/a

0°-90°

E0638

Vertical, Prone



Available

Flat-to-Load

Yes

Yes

Supine Standing

Zing MPS-Size 2

B

Centering the Hip (A):The user's hip should be centered in line with the pivot point of the stander ensuring proper hip alignment when using abduction, adjust support components up or down based hip position.

Foot Plate Height (B):Measure the distance from the hip of the user to the bottom of the foot.

Knee Pad Height (C):Measure the distance from the hip of the user to center of the knee.

C

A

FITTING THE ZING

page 16

Supine Standing

Zing Prone-Size 2

PB5518 Platform Foot Plate

Great for transporting stander. Directionallylocks one caster while leaving the otherthree free to swivel.

PB5510 Directional Locking Caster



Allows both foot and hand control of the gas spring lift. Push handle PB5560required.

PB5516 Dual Control

Mast is the base for positioning optionsincluding foot plates, knee supports, pelvicsupports, upper body supports and headsupports.

PB5512 Mast

Comes with four swivel locking casters, Pow'r Up Lift, mast receiver. MPS base comes with prone position lockout.

PB5504 Zing MPS Base Pow’r Up Lift PB5506 Zing Supine Base Pow’r Up Lift


PB5500 Zing MPS Base Gas Spring Lift PB5502 Zing Supine Base Gas Spring Lift

Provides anterior knee support with the strap and posterior knee support with the pad. PB5646 inside width is 5" (13cm), PB5648 inside width is 7" (17cm) and PB5650 inside width is 8" (20cm). Not available with any other knee support options or calf pads.

PB5646 Posterior Knee Pads 5" PB5648 Posterior Knee Pads 7" PB5650 Posterior Knee Pads 8"

Multi-adjustable knee pads are adjustable in swivel, height +/-.75" (2cm), PA5530 inside width 3.25" (8cm), PA5532 inside width 4.25" (11cm) and PB5534 inside width 5" (13cm). With a depth range of 7" (18cm).

PB5530, PB5532, PB5534Multi-Adjustable Knee Pads

17.5"x5.5" (44x14cm) pad attached to a 2"(5cm) Velcro® belt with a D-Ring closure, provides calf/knee stability for user. Fits circumference up to 28"-38" (71-97cm). Gives support from the back of the calf/knee. Adjustable in height and fore/aft.

PB5528 Calf/Knee Pad with Strap

Velcro® and D-ring adjustment holds feetin alignment with multiple attachment slotsfor proper foot positioning. Strapsmeasured in length over top of foot, withapproximately 1.5" (4cm) of Velcro®overlap.

PT50080 Foot Straps-10"L PY5636 Foot Straps-15"L PNG50505 Foot Straps-21"L

Velcro® and D-ring adjustment holds feetsecurely in place at ankles and toes withmultiple attachment slots for proper footpositioning. Straps measured in lengthover top of foot, with approximately 1.5"(4cm) of Velcro® overlap.

PT50082 Secure Foot Straps-10"LPY5638 Secure Foot Straps-15"LPNG50506 Secure Foot Straps-21"L

Use with the platform foot plate, providesadded positioning of users feet. Footholder sizes: PA5542 7.75"Lx3.25"W (20x8cm),PA5544 9.75"Lx4"W (25x10cm), PB5526 11.75"Lx5"W (30x13cm).

PA5542, PA5544, PB5526Foot Holders for Platform Foot Plate

Foot plates are adjustable forward/aft +/-.75" (2cm) +extra 1.5" (3.8cm), plantar/dorsi +/- 20°, toe-in/toe-out, swivel 30° left/right and in height. Foot holder sizes: PB5520 7.75"Lx3.25"W (20x8cm), PB5522 9.75"Lx4"W (25x10cm). PB5524 11.75"Lx5"W (30x13cm).

PB5520, PB5522, PB5524 Multi-Adjustable Foot Plates

Form to fit pad can be custom fit tothe user. Pad sizes: PB3004 10"Hx11"W(25x28cm) PB3006 10"Hx13"W(25x33cm). Not recommended with legabduction mast.

PB3004 Form to Fit Pad 10"Hx11"WPB3006 Form to Fit Pad 10"Hx13"W

Cushioned pad covered with Neoprene®.Pad sizes: PB3000-10"Hx11"W (25x28cm)PB3002-10"Hx13"W (25x33cm)

PB3000 Planar Pad 10"Hx11"WPB3002 Planar Pad 10"Hx13"W

The MPS (multi-position stander) base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring or Pow'r Up Lift • Mast Receiver with Prone Position Lockout


PT30066 Pelvic Positioning Strap

Keeps the hips in symmetrical alignment.Adjustable from PB5538 7"-13" (18-33cm) and PB5540 12"-18" (30-46cm) withfore/aft 4" (10cm). Pad size is 4.5"x4"(11x10cm). For planar pads only.

PB5538, PB5540 Hip Supports

Adjustable in height. Foot holders and footstraps can be added for more precise positioning of the feet. Platform 16.75"Wx11.5"L (29-43cm).


PB5514 Mast with Leg Abduction

page 17

The Supine base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring or Pow'r Up Lift • Mast Receiver

Zing MPS (Multi-Position Stander)

Zing SupineSize 2-Options

154 lbs(70 kg)

40"-6

0"(1

02-1

52cm

)

Size 2

Great for adapting to knee contractures.Gives support from the back of the calf.Adjustable in height with knee pad and fore/aft +3"/-2" (+8cm/-5cm) independently. Must order multi-adjustable knee pads.

PA5678 Multi-Adjustable Calf Pads 4.5"PB5536 Multi-Adjustable Calf Pads 5.5"




PNG30170 X-Style Chest Vest-11"Lx9.5"W PNG30056 X-Style Chest Vest-14.5"Lx10.5"W PNG30171 Y-Style Chest Vest-17.5"Lx11.5"WPNG30021 Y-Style Chest Vest-20.5"Lx12.5"W


PB5556 Black Molded Swing-Away Tray-21"Lx24"W


PB5554 Black Molded Tray-21"Lx24"W

Great for loading and bringing to upright. For planar pads only. Height and width adjustable.

PB5552 Elbow Stop with Arm Rest

Works as a lateral support, elbow rest and armrest. Great for the supine, upright and prone position. For planar pads only. Height and width adjustable.

PB5550Lateral Supports w/Elbow Stop/Arm Rest

Works as a lateral support and elbow rest. Great for the supine position. Range: 7"-11" (18-28cm) with planar pad B3053 10"-17" (25-43cm) with planar pad B3001 and 12"-19" (30-48cm) with planar pad B3003. For planar pads only.

PB5548 Lateral Supports with Elbow StopPB5639 Lateral Supports with Elbow Stop

Form to fit pad with built in lateral support that can be custom fit to the user. Pad size for PB3005 is 8"Hx11"W (20x28cm) and PB3007 is 8"Hx13"W (20x33cm).

PB3005 Form to Fit Pad-8"Hx11"WPB3007 Form to Fit Pad-8"Hx13"W

Washable slip on cover available in five different patterns. For form to fit pads PB3004 and PB3006.

PB3027, PB3028 Hygienic Cover

Washable slip on cover available in five different patterns. For planar pads PB3000 and PB3002.


6"x10" (15x25cm) pad attached to a 2"(5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 35" (89cm).

PB5542 Pelvic Padded Positioning Strap

Washable slip on cover available in five different patterns. For PY5626, PY5628 PY5630 and PA5586.

PA3035, PA3036, PB3033, PA3037Hygienic Cover



Cushion sizes are: PY5626 5"Hx8"W (13x20cm), PY5628 6"Hx10"W (15x25cm), PY5630 7"Hx14"W (18x36cm). Depth range is +1" to -2.75" (+2 to -7cm) from backrest. Maximum height from top of upper body pad is 10" (25cm).

PY5626 Head Support 5"Hx8"WPY5628 Head Support 6"Hx10"WPY5630 Head Support 7"Hx14"W

Washable slip on cover available in five different patterns. For PB5653, PB5654, PB5544 and PB5546. Not available with elbow stop or arm rest.


Washable slip on cover available in five different patterns. For planar pads PB3053, PB3301 and PB3003 and form to fit pads PB3005 and PB3007.

PB3054, PB3029, PB3030 Hygienic Cover PB3031, PB3032 Hygienic Covers


PB5542 Upper Body Padded Positioning Strap


P80809 Tool Pouch


PNG50042 Hand Grips

Washable slip on cover is padded andavailable in five different patterns.

PNG30295 Hygienic Padded Cover

Additional padded support surface on theblack molded or clear tray. 9.25" (24cm), 11" (28cm) and 13" (33cm) cutout width. Overall width 21.5" (55cm), pad extends back 3.75" (10cm) posterior from current table edge for additional upper body/extremity support.

PT50156 Elbow Pad-9.25" CutoutPT50160 Elbow Pad-11" CutoutPY5582 Elbow Pad-13" Cutout


PB5558 Clear Swing Away Tray-21"Lx24"W



Keeps the upper torso in symmetrical alignment. For planar pads only. Adjustable Range: PB5653 5"-7.25"W with PB3053, 7"-11"W with PB3001 and 9"-13"W PB3003. PB5554 8"-10.25"W with PB3053, 10"-14"W PB3001 and 12"-16"W PB3003 with a 3.5" (9cm) height range. Pad size is 4"Hx6"W (10x15cm).

PB5653 Lateral Supports Flat PadsPB5654 Lateral Supports Flat Pads

Cushioned pad covered with Neoprene®. Pad size for PB3053 is 8"Hx8"W (20x20cm). Pad size for PB3001 is 8"Hx11"W (20x28cm) and PB3003 is 8"Hx13"W (20x33cm).

PB3053 Planar Pad-8"Hx8"WPB3001 Planar Pad-8"Hx11"WPB3003 Planar Pad-8"Hx13"W

page 18


PB5560 Push Handle

Keeps the upper torso in symmetrical alignment. For planar pads only. Adjustable Range: PB5544 5"-7.25"W with PB3053, 7"-11"W with PB3001 and 9"-13"W PB3003. PB55546 8"-10.25"W with PB3053, 10"-14"W PB3001 and 12"-16"W PB3003 with a 3.5" (9cm) height range. Pad size is 4"Hx6.25"W (10x16cm).

PB5544 Lateral Supports with Curved PadsPB5546 Lateral Supports with Curved Pads

Provides anterior knee support with the strap and posterior knee support with the pad. PB5646 inside width is 5" (13cm), PB5648 inside width is 7" (17cm) and PB5650 inside width is 8" (20cm). Not available with any other knee support options or calf pads.

PB5646 Posterior Knee Pads 5" PB5648 Posterior Knee Pads 7" PB5650 Posterior Knee Pads 8"

Size 2-Options

154 lbs(70 kg)

40"-6

0"(1

02-1

52cm

)

Size 2






Great for transporting stander. Directionallylocks one caster while leaving the otherthree free to swivel.





PB5516 Dual Control

Mast is the base for positioning optionsincluding foot plates, knee supports, pelvicsupports, upper body supports and headsupports.

PB5512 Mast


PB5502 Zing TT Supine Base Gas Spring Lift PB5500 Zing TT MPS Base Gas Spring Lift 17.5"x5.5" (44x14cm) pad attached to a 2"

(5cm) Velcro® belt with a D-Ring closure,provides calf/knee stability for user. Fitscircumference up to 28"-38" (71-97cm). Gives support from the back of the calf/knee. Adjustable in height and fore/aft.


Washable slip on cover available in fivedifferent patterns. For planar padsPB5570, PB5572, PB5574.

PB5600, PB5602, PB5604 Hygienic Covers

Cushioned Neoprene® pad for legsupport. Pad sizes:PB5570- 9"Hx7.5"W (19x23cm)PB5572-12"Hx7.5"W (19x30cm)PB5574-15"Hx7.5"W (19x38cm)

PB5570, PB5572, PB5574Leg Support Planar Pads

Use with the platform foot plate, givesadded positioning of users feet. Footholder sizes: PA5542 7.75"Lx3.25"W (20x8cm), PA5544 9.75"Lx4"W (25x10cm), PB5526 11.75"Lx5"W (30x13cm).






4"x6" (10x15cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 19" (48cm). Adjustable in height. For leg supports PB5570, PB5572, PB5574.

PB5576, PB5578, PB5580 Knee Strap

Cushioned pad covered with Neoprene®. Pad sizes:PB3012-19"Hx16"W (48x41cm)PB3015-22"Hx16"W (56x41cm)PB3018-25"Hx16"W (64x51cm)

PB3012, PB3015, PB3018 Planar Pad

Great for adapting to knee contractures.Gives support from the back of the calf.Adjustable in height with knee pad and fore/aft 4" (10cm) independently. Must order multi-adjustable knee pads.

PA5678 Multi-Adjustable Calf Pads 4.5"PB5536 Multi-Adjustable Calf Pads 5.5"

Adjustable in height. Foot holders and footstraps can be added for more precise positioning of the feet.

Mast is the base for support and positioning components and allows for 0-30º of independent leg abduction. Multi-adjustable knee pads, leg supports or posterior knee pads and multi-adjust-able foot plates required for leg abduction.


page 19

PB5562 Zing MPS TT Base Gas Spring Lift PB5564 Zing Supine TT Base Gas Spring Lift

Comes with four swivel locking casters, Pow'r Up Lift, mast receiver. MPS base comes with prone position lockout.

PB5502 Zing TT Supine Base Gas Spring Lift PB5500 Zing TT MPS Base Gas Spring LiftPB5566 Zing MPS TT Base Pow’r Up LiftPB5568 Zing Supine TT Base Pow’r Up Lift

Zing MPS TT(Tilt Table)

Zing Supine TT(Tilt Table)Size 2-Options

The MPS (multi-position stander) TT base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring or Pow'r Up Lift • Mast Receiver with Prone Position Lockout

The Supine TT base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring or Pow'r Up Lift • Mast Receiver



Washable slip on cover available in five different patterns. For PB5588 and PB5599.

PB3049 Hygienic Cover

6"x10" (15x25cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to PB5596 45" (114cm) and PB5598 57" (145cm).

PB5596 Upper Body Padded Positioning Strap PB5598 Upper Body Padded Positioning Strap


PB5558 Clear Swing Away Tray-21"Lx24"W


PB5556 Black Molded Swing-Away Tray-21"Lx24"W


PNG30171 Y-Style Chest Vest-17.5"Lx11.5"WPNG30021 Y-Style Chest Vest-20.5"Lx12.5"W


PNG30170 X-Style Chest Vest-11"Lx9.5"W PNG30056 X-Style Chest Vest-14.5"Lx10.5"W

6"x10" (15x25cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to PB5592 45" (114cm) and PB5594 57" (145cm).

PB5592 Pelvic Padded Positioning StrapPB5594 Pelvic Padded Positioning Strap

2" (5cm) wide belt has a Velcro® belt with a D-Ring closure, provides hip stability for user. Fits circumference up to PA3011 45" (114cm) and PB3052 57" (145cm).

PA3062 Pelvic Positioning StrapPB3052 Pelvic Positioning Strap

Keeps the hips in symmetrical alignment.Adjustable from PB5538 7"-13" (18-33cm) and PB5540 10"-16" (25-41cm) withfore/aft 4" (10cm). Pad size is 4.5"x4"(11x10cm).


Washable slip on cover available in fivedifferent patterns. For planar padsPB3012, PB3015, PB3018.

PB3035, PB3036, PB3037 Hygienic Cover



Washable slip on cover available in five different patterns. For PA5586.


Washable slip on cover available in five different patterns. For PY5626, PY5628 and PY5630.

PA3035, PA3036, PB3033 Hygienic Covers

Washable slip on cover available in five different patterns. For PB5582.

PB3038 Hygienic Cover for Head Support Planar Pad



Cushion sizes are: PY5626-5"Hx8"W (13x20cm), PY5628-6"Hx10"W (15x25cm), PY5630-7"Hx14"W (18x36cm). Depth range is +1" to -2.75" (+2 to -7cm) from backrest. Maximum height from top of upper body pad is 10" (25cm).

PY5626 Head Support 5"Hx8"WPY5628 Head Support 6"Hx10"WPY5630 Head Support 7"Hx14"W

Cushioned Neoprene® pad for head support. Pad size 9"Hx10"W (23x25cm).

PB5582 Head Support Planar Pad


PNG30295 Hygienic Padded Cover

Additional padded support surface on theblack molded or clear tray. 13" (33cm) cutout width. Overall width 21.5" (55cm), pad extends back 3.75" (10cm) posterior from current table edge for additional upper body/extremity support.

PY5582 Elbow Pad-13" Cutout


PT50160 Elbow Pad-11" Cutout

Additional padded support surface on theblack molded or clear tray. 9.25" (24cm) cutout width. Overall width 21.5" (55cm), pad extends back 3.75" (10cm) posterior from current table edge for additional upper body/extremity support.

PT50156 Elbow Pad-9.25" Cutout

page 20




P80809 Tool Pouch


PB5560 Push Handle


PNG50042 Hand Grips

Keeps the upper torso in symmetrical alignment. Adjustable from PB5655 7-11"(18-28cm) and PB5656 10-16" (25-41cm) with a 3.5" (9cm) height range. Pad size is 4"Hx6"W (10x15cm). For planar pads only.

PB5655 Lateral Supports-7"-11" Range Flat PadsPB5656 Lateral Supports-10"-16" Range Flat Pads

Keeps the upper torso in symmetrical alignment. Adjustable from PB5655 7-11"(18-28cm) and PB5656 10-16" (25-41cm) with a 3.5" (9cm) height range. Pad size is 4"Hx6.25"W (10x16cm). For planar pads only.

PB5588 Lateral Supports-7"-11" Range Curved PadsPB5590 Lateral Supports-10"-16" Range Curved Pads

154 lbs(70 kg)

40"-6

0"(1

02-1

52cm

)

Size 2


Adjustable in height. Foot holders and foot straps can be added for more precisepositioning of the feet.




Locks gas spring in any position from lying down to fully upright and supine positions.


Mast is the base for support and positioning components and allows for 0-30º of independent leg abduction. Multi-adjustable knee pads and multi-adjustable foot plates required for leg abduction.



PB5512 Mast

Comes with four swivel locking casters, foot operated gas spring and a mast receiver.

PB5606 Zing Prone Base Gas Spring Lift

Cushioned pad covered with Neoprene®. Pad sizes: PB3000 10"Hx11" (25x28cm ) PB3002 10"Hx13"W (25x33cm).

PB3000 Planar Pad-10"Hx11"WPB3002 Planar Pad-10"Hx13"W

4"x6" (10x15cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fits circumference up to 19" (48cm). Adjustable in height. For PB5622, PB5624 and PB5626.

PB5636 Knee Strap



17.5"x5.5" (44x14cm) pad attached to a 2"(5cm) Velcro® belt with a D-Ring closure,provides calf/knee stability for user. Fitscircumference up to 28"-38" (71-97cm). Gives support from the back of the calf/knee. Adjustable in height and fore/aft.






Use with the platform foot plate, givesadded positioning of users feet. Footholder sizes: PA5542 7.75"Lx3.25"W (20x8cm),PA5544 9.75"Lx4"W (25x10cm), PB5526 11.75"Lx5"W (30x13cm).


Keeps the hips in symmetrical alignment.Adjustable from PB5538 7"-13" (18-33cm) and PB5540 12"-18" (30-46cm) withfore/aft 4" (10cm). Pad size is 4.5"x4"(11x10cm). For planar pads only.


Form to fit pad can be custom fit to the user. Pad sizes: PB3004 10"Hx11"W (25x28cm) PB3006 10"Hx13"W (25x33cm).

PB3004 Form to Fit Pad-10"Hx11"WPB3006 Form to Fit Pad-10"Hx13"W

The Prone base includes: • Four Swivel Locking Casters • Foot Operated Gas Spring or Pow'r Up Lift • Mast Receiver


PB5542Pelvic Padded Positioning Strap


PT30066 Pelvic Positioning Strap



PB5640 Dual Control

page 21

Comes with four swivel locking casters, Pow'r Up Lift, mast receiver.

PB5608 Zing Prone Base Pow’r Up Lift

Zing Prone

Size 2-Options


Washable slip on cover available in five different patterns. For lateral supports PA5627 and PB5627.


Washable slip on cover available in five different patterns. For form to fit pads PA3079, PB3046, PA3081 and PB3047.

PA3086, PB3050, PA3088, PB3051 Hygienic Cover

Provides additional arm and hand support and alignment. Easily movable for precise arm positioning. Attaches with suction cups.

PNG50042 Hand Grips


PT30093 Hygienic Padded Cover

Washable slip on cover available in five different patterns. For planar pads PA3006, PA3007, PA3041 and PA3042.

PA3028, PA3029. PA3045, PA3046 Hygienic Cover

6"x10" (15x25cm) pad attached to a 2" (5cm) Velcro® belt with a D-Ring closure. Fts circumference up to 35" (89cm).

PB5542Upper Body Padded Positioning Strap

Keeps the upper torso in symmetrical alignment. Adjustable range of 7"-12" (18-30cm) with 7"W planar pads, 9"-14" (23-36cm) with 9"W planar pads. Pad size is 4"Hx6.25"W (10x16cm). For planar pads only.

PB5627 Lateral Supports Curved Pads

Form to fit pad with extra sternum positioning. Built in lateral support that can be custom fit to the user. Pad sizes are: PA3079-5"Hx12"W (13x30cm) PB3046-6"Hx13"W (15x33cm PA3081-7"Hx12"W (18x30cm) PB3047-10"Hx13"W (25x33cm

PA3079, PB3046, PA3081, PB3047Form to Fit Pad

Cushioned pad covered with Neoprene®. Pad sizes:PA3006-5"Hx7"W (13x18cm)PA3007-5"Hx9"W (13x21cm)PA3041-7"Hx7"W (18x18cm)PA3042-7"Hx9"W (18x21cm)

PA3006, PA3007, PA3041, PA3042Planar Pad

Washable slip on cover available in five different patterns. For form to fit pads PB3004 and PB3006.


Washable slip on cover available in fivedifferent patterns. For planar padsPB3000 and PB3002.



PY5582 Elbow Pad-13" Cutout


PT50160 Elbow Pad-11" Cutout

Additional padded support surface on theblack molded or clear tray. 9.25" (24cm) cutout width. Overall width 21.5" (55cm), pad extends back 3.75" (10cm) posterior from current table edge for additional upper body/extremity support.

PT50156 Elbow Pad-9.25" Cutout


PB5630 Clear Tray-21"Lx24"W



Washable slip on cover available in five different patterns. For face aperture PB5638.


Pad size is 9"Hx3"W (23x8cm). With a 7" (18cm) range from the upper body support, individual face aperture pads are adjustable. Supports the head.

PB5638 Face Aperture-9"HMakes pushing the stander easier for the caregiver and also aids in lifting andlowering the child. Required for dual control.

PB5632 Push Handle for Tray


P80809 Tool Pouch



page 22

Keeps the upper torso in symmetrical alignment. Adjustable range of 7"-12" (18-30cm) with 7"W planar pads, 9"-14" (23-36cm) with 9"W planar pads. Pad size is 4"Hx6"W (10x15cm). For planar pads only.

PB5657 Lateral Supports Flat Pads

Standing technology should only be used under the guidance of a physician with recommendations for standing program protocol and any medical precautions. Standing programs should be monitored by the attending therapist. AMI maintains a policy of continual product improvement and reserves the right to change features, specifications and prices without prior notification. Check with AMI for latest information.

FORM ZINGCAT031120 REV D Copyright © 2020 Altimate Medical, Inc. All rights reserved. Printed in the USA.

Altimate Medical, Inc. 262 West First StreetMorton, MN 56270 USATel: 800.342.8968 • 507.697.6393Fax: 877.342.8968 • 507.697.6900 [email protected] • zingstanders.com

Check out all the brands.

supine to prone in one motion - zing · rainbow unicorn sea creatures fancy pants elephants zing...

Documents