superstrut quick reference guide - tnb.comtnblnx3.tnb.com/emalbum/albums/us_resource/quick... · 2...
TRANSCRIPT
Superstrut ® Quick Reference Guide
www.tnb.com
2
Metal Framing Channels — Overview
New Trivalent GoldGalv® Finish Is RoHS CompliantThomas & Betts is proud to introduce the new and improved Trivalent GoldGalv® finish. GoldGalv® finish is a combination of .5 mils electro-plated Zinc and a gold Trivalent Chromium finish.
®
®
®
®
®
® ®
®
Formed Hot Rolled Steel
Electro-PlatedZinc Coating
Gold Trivalent Conversion Coat
GoldGalv®
The standard GoldGalv® finish is made up of a multi-step electrogalvanizing and Zinc Dichromate process. The Trivalent Chromium finish is applied over the Zinc, producing a chemically bonded non-porous barrier for protection from moisture and air. The .5 mil electro-plated Zinc and gold Trivalent Chromium finish provide all of the features and protection of Hexavalent Chromium without the use of the chemical.
SilverGalv®
Electro-Galvanized Finish From Superstrut®
Protection is the name of the game and SilverGalv® delivers a winning combination of features designed to meet the most exacting specifications. SilverGalv® offers the ultimate in corrosion protection versatility and performance, including…
Strong Abrasion Resistance ®
Clean Finish ®
®
Interchangeable Silver Color. ®
Paintable Surface ®
No More White Rust. ®
Punched Holes and Cut Ends Are Protected.
® ®
www.tnb.com
3
Finishes
“Soak Degreasing” Chemical solution removes bulk of oil and grease buildup.
“Electro Cleaner” The metal is
negatively chargedto remove minute surface particles.
“Rinse” Live, clear water rinse.
“Sulfuric Acid Bath” Prepares the metal by etching the surface for
the zinc application.
“Rinse” Live, clear water rinse.
“Chromate Dip” Chromate conversion
coat is applied.
“Rinse” Live, clear water rinse.
“Dryer” Hot air is forced
around strut until dry.
“Rinse” Live, clear water rinse.
“Zinc Tank” Electrically applies
the zinc metal coating.
“Rinse” Chemically treated
rinse water.
“Rinse” Live, clear water rinse.
Metal Framing Channel FinishCorrosion-Resistant Testing, ASTM B117
IndustryEnamelGreen
EpoxyGreen
Pre-GalvanizedG90
EG-SilverGalv
Trivalent GoldGalv
11001000
900800700600500400300200100
0
www.tnb.com
4
Metal Framing Channels — Overview
Other FinishesGreen or White Urethane Powder Coated (Suffix GR or WH)
Urethane powder resins are applied electrostatically to the steel after fabrication. Once the material is completely covered with the powder-form urethane, it proceeds through a 400˚ F baking process for ten minutes, creating a chemical bond. This results in a minimum of 1.5 mil thickness of urethane coating, providing excellent resistance to chipping or peeling.
Pregalvanized (Suffix PG)
A Zinc coating is applied by hot-dipping the steel coil at the mill prior to fabrication. Once the material is worked by roll-forming, cutting or punching, minimal protection is provided for raw edges. This weakness is typical with precoated material and affects the channel section around holes, extreme ends and the edges of the “U” shape lips. Superstrut® pregalvanized material is in conformance with ASTM A-525/G-90 specification standards, representing 0.90 ounces of Zinc per square foot of steel. This finish is often referred to as “hot-dipped mill galvanized” or “mill galvanized”.
Hot-Dipped Galvanized (Suffix HDG)
The material is Zinc coated after fabrication, providing total product protection on all surfaces. The fabricated channel or fitting is suspended and then dipped into tanks of hot Zinc for a prolonged period, creating a coherent bond. The result is superior corrosion resistance as compared to pregalvanized material. Hot-dipped galvanizing is not recommended for threaded products, considering the Zinc coating thickness will often disrupt the threads. Superstrut® hot-dipped galvanized is in conformance with ASTM Specifications A-123 (formerly A-386) and A-153. Superstrut® channels maintain a minimum 1.5 ounces of Zinc per square foot of steel or 2.5 mils (ASTM A-123, Thickness Grade 65). This finish is also referred to as “hot-dipped galvanized after fabrication”.
PVC Coated (Suffix PVC)
A Polyvinyl Chloride (PVC) plastic coating is fused to the channel, fitting or accessory after fabrication by immersing the part in fluidized PVC tanks. The fused-melt mixed powder PVC coating thickness is 15 mils (.015" ) plus or minus five mils. PVC material is a thermoplastic and will soften in high temperatures. An inherent weakness with PVC coatings occurs when field alterations are applied, such as cutting or drilling. These acts disrupt the sealed PVC product and warrant field touch-up. Thomas & Betts cannot be held responsible for field-altered PVC coated products.
Copper Plated (“T” inserted as the second digit of the part number; Example: CTL-710-2)
Plain steel proceeds through a series of rinse tanks to clean the material surface. Once cleaned, the fabricated part is etched by dipping into an acid pickle bath to prepare the surface for adhesion. Copper is electrically applied by submerging in a copper bath. To seal the finish, the product continues to a sealer tank and is then dried by forced hot air.
Black (Suffix B)
A black finish is raw steel with only a light oil finish as supplied by the steel manufacturer. There is no protection against red rust.
Stainless Steel (Suffix SS)
Superstrut® channel is supplied in type 304 stainless steel when required. Type 316 stainless steel may be available upon request.
Aluminum (Suffix AL)
Superstrut® channel and hardware are available in aluminum.
Warning:
Load tables, charts and design criteria provided in this catalog are intended as guides only. Selection of proper product, installation intervals, erection and placement are the responsibility of the user.
Superstrut® products are intended to be used for the support and bracing of fixtures, cable, pipe and conduit. Improper use or installation may result in injury to persons or damage of property.
Material and finish specifications are subject to change without notice.
www.tnb.com
5
Channels
Product Code SampleProduct Identification Code Selection and Example
When specifying or ordering a Thomas & Betts channel product from the catalog, specify the product series models number as shown, select gauge, if needed specify hole designation such as HS for half-slot, then length and finally the material finish suffix shown to the right such as SS for stainless steel.
Example: To specify a 12 gauge, 15⁄8" channel with a half slot in stainless steel, 10', your code designation would be A-1200-HS-10-SS.
Note: If no other finish is selected, our standard GoldGalv® finish will be provided.
A-1200-HS-10-SS
CODE DESCRIPTION
A Product Series Number
1200 Gauge Thickness
HS Hole Configuration Type (If No Holes are Required Leave Blank)
10 Length in feet
SS Material finishes suffix (SS for Stainless Steel)
Hole Configurations
Half-Slot Channel (HS)
CAT NO. DESCRIPTION
A-1200-HS 15⁄8" x 15⁄8"
B-1200-HS 15⁄8" x 13⁄16"
C-1200-HS 15⁄8" x 13⁄8"
E-1200-HS 15⁄8" x 27⁄16"
H-1200-HS 15⁄8" x 31⁄4"
A-1400-HS 15⁄8" x 15⁄8"
B-1400-HS 15⁄8" x 13⁄16"9⁄ 1⁄8
Punched Channel (P)
CAT NO. DESCRIPTION
A-1200-P 15⁄8" x 15⁄8"
B-1200-P 15⁄8" x 13⁄16"
H-1200-P 15⁄8" x 31⁄4"
A-1400-P 15⁄8" x 15⁄8"
B-1400-P 15⁄8" x 13⁄16"9⁄ 7⁄8
Slotted Channel (S)
CAT NO. DESCRIPTION
A-1200-S 15⁄8" x 15⁄8"
B-1200-S 15⁄8" x 13⁄16"
A-1400-S 15⁄8" x 15⁄8"
B-1400-S 15⁄8" x 13⁄16"7⁄
Channel w/ Knockouts (KO)
CAT NO. DESCRIPTION
A-1200-KO 15⁄8" x 15⁄8"
A-1400-KO 15⁄8" x 15⁄8"1⁄
Steel Channels7⁄8
Material
Channels are cold formed from hot-rolled pickled and oiled strip steel.
Material Thickness
All Series 1200 12 gauge materialAll Series 1400 14 gauge material
Standard Lengths
Standard lengths for channel are 10 ft. and 20 ft.Standard length tolerance ± 1⁄8".Shorter lengths are available at a small cutting charge.
H-1200A-1200 (12 ga.)A-1400 (14 ga.)
A Series
15⁄8"7⁄8"
⁄8"
15⁄8"
9⁄ "
B-1200 (12 ga.)B-1400 (14 ga.)
B Series
15⁄8"7⁄8"
⁄8"9⁄ "
⁄ "
C-1200
C Series
15⁄8"7⁄8"
⁄8"9⁄ "
1 ⁄8"
E-1200
E Series
7⁄8"⁄8"
9⁄ "
H Series
7⁄8"⁄8"
9⁄ "
www.tnb.com
6
RA-GP Gusset Plate RAC — Portable Cutter
Rigid and Swivel Casters
RA-RC Rigid Center RA-SC Swivel Caster
Nuts Serrated for Self Locking — RABN
Concrete Inserts/Other Items
452-Spot Insert
Knockout
B-302 Concrete Insert
B-804 End Cap
15⁄8"
13⁄16"
C-302 Concrete Insert
C-804 End Cap
15⁄8"
13⁄8"
Combination Channels“A” Series Section (Also available in “B”, “E”, “H”, & “C” Series sections)
A1202 A1202-A A1202-B A1202-C A1203-A A1203-B A1203-C
5⁄8
Slotted Angle
RA-160 Slotted Angle
CAT NO. LENGTH
RA-160-10 10"
RA-160-12 12"
Type RA-16015⁄8 5⁄8
RA-255 Slotted Angle Heavy Duty
CAT NO. LENGTH
RA-225-10 10"
RA-225-12 12"
Type RA-225⁄8 5⁄8
RA-300 Slotted Angle Extra Heavy Duty
CAT NO. LENGTH
RA-300-10 10"
RA-300-12 12"
Type RA-3001⁄ 5⁄8
Combination Channels/Slotted Angle/Concrete Inserts
www.tnb.com
7
Channel Nuts/Seismic Bracing
UC-100Nylon Cone Nut
A-100Regular Spring Nut
B-100Short Spring Nut
AB-100Springless Nut
A-182 to A-185Regular Spring Stud Nut
C-749-N-7⁄8Seismic Brace
C-749-NStandard Seismic Brace
ES-142 — 1⁄2 x 11⁄2Seismic Bracing Rod Stiffener
Connector
C-749-N-1-1⁄8Standard Seismic Brace
C-749-N-5⁄8Standard Seismic Brace
Channel Nuts
Seismic Bracing
CM-100 Nylon Cone Nut H-100 Long Spring Nut
www.tnb.com
8
Standard Finish – GoldGalv ®, unless otherwise stated.
⁄
17⁄8
9⁄
5⁄8
1⁄
Standard Dimensions
Fittings & Brackets
Series 200Material
Superstrut® fittings and brackets are manufactured from hot rolled carbon steel.
Dimensions
The following standard dimensions apply to all fittings except as indicated on the individual drawings.
⁄ "
7⁄8"
9⁄
5⁄8"
1⁄ "
Application Instructions
Parts drawings illustrate a typical use for the fitting, and in many cases other uses for the part are appropriate.
Design Data
Ratings vary when used with 12 or 14 gauge channel and are shown for each channel material.
GoldGalv® hardware finish is standard for all Superstrut®
products. This is a multi-process finish of electro-plated zinc, followed by gold-colored zinc dichromate to give excellent corrosion resistance and a superior paint base. See page 2 for complete description of the GoldGalv® hardware finish. GoldGalv® hardware will be furnished if no other finish is specified.
Nuts and Bolts Required
Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately.
The standard bolt for the 9⁄16" hole is a 1⁄2" hex head cap screw 15⁄16" long. The 15⁄16" length may be used with all series channel.
Standard Finish – GoldGalv ®, unless otherwise stated.
31⁄2"
21⁄4"
AB204
17⁄16"
41⁄8"
31⁄2"
AB213
AB205
13⁄16"
17⁄8"
41⁄8"
17⁄16"
31⁄2"
41⁄8"
AB203
AB206
31⁄2"
AB207
53⁄8"
21⁄4"
AB201
15⁄8"
AB202
2"
17⁄8"
www.tnb.com
9
CAT. NO. A (IN.)STD. CTN.
AB252 1 37⁄8 10
AB252 2 57⁄8 10
AB252 3 77⁄8 10
AB252 4 97⁄8 10
A
17⁄8"
AB252
31⁄2"
17⁄16"41⁄8"
AB254 L
AB-242For use with either 3⁄8"
or 1⁄2" hanger rod
AB253
53⁄8"
53⁄8"
17⁄16"
31⁄2"
41⁄8"
AB214
41⁄8"
31⁄2"
31⁄2"
AB216
31⁄2"
31⁄2"
AB219
53⁄8"
31⁄2"
AB220 AB240
7"
3 5⁄8"
41⁄8"
17⁄16"
31⁄2"
AB254 R
31⁄2"
17⁄8"
2"
AB260 R
17⁄8"
2"
31⁄2"
AB260 L
AB257
5 3⁄8"
31⁄2"
31⁄2"
31⁄2"
AB255
Standard Dimensions
⁄7⁄8
9⁄5⁄8
1⁄Standard Finish – GoldGalv ®,unless otherwise stated.AB284 R
31⁄2"
41⁄8"
53⁄8"
AB299
2"
2"
AB261
53⁄8"
53⁄8"
AB263
53⁄8"
53⁄8"
AB265
53⁄8"
31⁄2"
AB284 L
53⁄8"
41⁄8"
31⁄2"
53⁄8"
AB274
31⁄2"
15⁄8"
21⁄4"
AB-222AB-221
51⁄2"
121⁄32"
9⁄16" Wide Slot to Fit 1⁄2" Bolt
115⁄16"
To Fit 3⁄8" & 1⁄2" Rods
41⁄8"
9⁄16" Wide Slot to Fit 1⁄2" Bolt
121⁄32"
115⁄16"
To Fit 3⁄8" & 1⁄2" Rods
www.tnb.com
10
X201
21⁄2"
21⁄2"
47⁄8"
17⁄8"
X299
11⁄2"
15⁄16"
15⁄8"2 5⁄8"
X289
41⁄8"
3 1⁄2"13⁄8"
31⁄2"
5 3⁄8"
N-219
X207
71⁄4"
9 1⁄8"
X208
Fittings & Brackets
Z Shape Fittings
C209For attaching “C” series channel.
13⁄8"
21⁄8"
11⁄16"
A209For attaching “A” series channel.
11⁄16"
21⁄8"
15⁄8"
B209For attaching “B” series channel.
21⁄8"
11⁄16"
13⁄16"
⁄
7⁄8
5⁄8
1⁄
Standard Finish – GoldGalv®, unless otherwise stated.
Standard Dimensions
EZ209For attaching “E” series channel.
17⁄8"
2 7⁄16"
CZ209For attaching "A" back to back.
17⁄8"
3 1⁄4"
N205
37⁄8"
1"
11⁄16"3 3⁄4"
Series 200
X204Slot size is 9⁄16" x 11⁄2"
63⁄8"
17⁄8"
4"
33⁄4"
11⁄2"
www.tnb.com
11
⁄
7⁄8
5⁄8
1⁄
Standard Dimensions
Standard Finish – GoldGalv ®, unless otherwise stated.
Wing Shape Fittings
A217
121⁄32"15⁄8"
33⁄4"37⁄8"
AW204
2"17⁄8"
A218
121⁄32"15⁄8"
3 7⁄8"
57⁄8"
AW214
17⁄8"
3 7⁄8"
AW205-R
13⁄4"
17⁄8"13⁄4"
17⁄8"
AW205 L
AW219
3 7⁄8"
15⁄8" 121⁄32"
9 5⁄32"
AW220
15⁄8" 121⁄32"
2"
17⁄8"
513⁄32"
AW224
15⁄8"121⁄32"
5 7⁄16"
37⁄8"
AW228
121⁄32"15⁄8"
3 7⁄8"
3 3⁄4"
9 5⁄32"
AW226
121⁄32"15⁄8"
2"
513⁄32"
17⁄8"
www.tnb.com
12
Fittings & Brackets
U Shape Fittings
A208Does not include strut nut or bolts. For “A” series channel.
A210For attaching “A” series channel
A211For attaching “A” series channel.
71⁄4"
15⁄8"
53⁄8"53⁄8"
31⁄4"
B210
53⁄8"
121⁄32"
3⁄16"
Standard Dimensions⁄
7⁄8
9⁄
5⁄8
1⁄
Standard Finish – GoldGalv®,unless otherwise stated.
AB227
11⁄16"
3"45˚
2 5⁄16"
15⁄8"
B
15⁄8"
A
AB-239
21⁄2"
45˚
AB225
Angular Fittings
A212
15⁄8"
15⁄8"3 9⁄32"
7"
AB245 AB-288
39⁄32"
17⁄8"
121⁄32"
11⁄16"
1"
121⁄32"
1⁄4"
10 ga.
11⁄2"21⁄2"
AN211
47⁄8"
53⁄8"
121⁄32"
C210For attaching “C” series channel.
E210For attaching “E” series channel.
121⁄32"
5 3⁄8"
3⁄4"-16UNFThread
A-213
111⁄32"
3⁄32"
4 1⁄2"7⁄8"
13⁄8"
2 7⁄16"
5 3⁄8"121⁄32"
CAT. NO.A
(IN.)B
(IN.)STD.
CAT. NO.
AB239 1 713⁄16 81⁄2 15
AB-239-2 133⁄4 17 10
AB-239-3 193⁄4 251⁄2 10
Standard Finish – GoldGalv®,unless otherwise stated.
13⁄8"
31⁄2"
www.tnb.com
13
Post Bases
AP-232
31⁄2"
111⁄16"15⁄8"
4 Holes3⁄4" Dia.
2 Holes3⁄4" Dia.
AP-235FLAP-234FL
3 1⁄4"
6"
6"
4 Holes3⁄4" Dia.
3 1⁄2"
AP-235
AP-232SQ
111⁄16"
6"
41⁄4" 41⁄4"
6"
31⁄2"
6"6"
41⁄4"
31⁄2"
4 Holes3⁄4" Dia. 35⁄16"
4 Holes3⁄4" Dia.
41⁄4"
AP-235SQAP-206
5"
31⁄2"
15⁄8"
4 Holes7⁄16" Dia.
5⁄8"
Standard Finish – GoldGalv ®, unless otherwise stated.
8"
61⁄2"61⁄2"
31⁄8"
31⁄8"
3 1⁄2"
15⁄8"
15⁄8"
15⁄8"
3 3⁄8"
3 3⁄8"
AP-231
41⁄2"
15⁄8"
111⁄16"
15⁄8"
6"
41⁄2"
4 Holes3⁄4" Dia.
6"
2 Holes3⁄4" Dia.
AP-232FL
3"
61⁄2"
31⁄2"
111⁄16"15⁄8"
8"
AP-231FL
3"
61⁄2"
15⁄8"
111⁄16"15⁄8"
8"
2 Holes3⁄4" Dia.
2 Holes3⁄4" Dia.
AP-234
41⁄2"6"
41⁄2"
15⁄8"
15⁄8"
33⁄8"
6"
AP-231SQ
41⁄2"
15⁄8"
111⁄16"
15⁄8"
6"41⁄2"
4 Holes3⁄4" Dia.
6"
AW-239
15⁄8"
15⁄8"
115⁄16"
33⁄8"
31⁄8"
3⁄4" Dia.
AP-234SQ
15⁄8"
15⁄8"
33⁄8"4 Holes3⁄4" Dia.
41⁄2"6"
41⁄2"6"
4 Holes3⁄4" Dia.
8"
www.tnb.com
14
Fittings & Brackets
23⁄4"
6"
113⁄16"
TR292Frictionless needle bearings.
Design load: 500 lbs. Safety factor of 5.
11⁄4"
9⁄16" Dia.
Q205Q202
21⁄8"
21⁄8"
4"
4"
TR294Frictionless needle bearings.
Design load: 1,000 lbs.Safety factor of 5.
31⁄2"
9⁄16" Dia.
2 3⁄4"
6"
113⁄16"
Standard Dimensions
⁄
17⁄8
9⁄
5⁄8
1⁄
3 5⁄8"
2 7⁄16" 53⁄8"
Q256For 2" standard pipe.
Load 1,500 lbs.
35⁄8"
5 3⁄8" 2 7⁄16"
Q255For 2" standard pipe.
Load 1,500 lbs.
Special Application Fittings
Standard Finish – GoldGalv ®,unless otherwise stated.
Support Brackets
S-222 S-226 S-236 S-201 L, R
S-251 Series S-247 S-248 S-256 Series
S-204 S-205 S-217 S-218
S-250 Series
Q254For 11⁄4" standard pipe.
Load 1,500 lbs.
Q253
www.tnb.com
15
Hardware/Threaded Rod
Threaded RodH-10 Hanger Rod
CAT NO. THREAD SIZE
H-104 — 1/4 X 6H-104 — 1/4 X 10H-104 — 1/4 X 12
1⁄4"–20
H-104 — 3/8 X 6H-104 — 3/8 X 10H-104 — 3/8 X 12
3⁄8" –16
H-104 — 1/2 X 6H-104 — 1/2 X 10H-104 — 1/2 X 12
1⁄2"–13
H-104 — 5/8 X 6H-104 — 5/8 X 10H-104 — 5/8 X 12
5⁄8"–11
++Safety factor of 3.
Hanger Rod Load Chart
ROD SIZEULTIMATE++LOAD IN LBS.
1/4–20 900
3/8–16 1900
1/2–13 3500
5/8–11 6000
H-119 Steel Rod Coupling
CAT. NO. ROD SIZE
H-119–1/4 1⁄4
H-119–3/8 3⁄8
H-119–1/2 1⁄2
H-119–5/8 5⁄8
H-104 Hanger RodContinuous Thread
Standard Finish: GoldGalv ®
AB-241 Square Washer
DIMEN. IN INCHES
CAT. NO. SIZE THICKNESS WT. IN LBS./C
AB-241 — 1/4 1⁄4 1⁄8 8.1
AB-241 — 5/16 5⁄161⁄8 8.0
AB-241 — 3/8 3⁄8 3⁄16 11.50
AB-241 — 1/2 1⁄2 1⁄4 14.36
AB-241 — 5/8 5⁄8 1⁄4 13.50
AB-241 — 3/4 3⁄4 1⁄4 12.50
AB-241 — 7/8 7⁄8 1⁄4 13.0
AB-241Square Washer
H-119 Steel Rod Coupling
AB-242 Saddle-Type WasherFor Rigid Attachment to Rod
to Channel. For Use with either 3⁄8" or 1⁄2" Hanger Rod.
A CAT. NO.ROD SIZE
(IN.)A
(IN.)STD.CTN.
H-119-1/4 X 3/8 1⁄4–3⁄8 11⁄2 50H-119-3/8 X 1/2 3⁄8–1⁄2 11⁄4 50H-119-1/2 X 5/8 1⁄2–5⁄8 11⁄4 50H-119-5/8 X 3/4 5⁄8–3⁄4 11⁄2 50H-119-3/4 X 7/8 3⁄4–7⁄8 13⁄4 50
Reducing Rod Coupling
E-151 — Coach Screw Rod
CAT. NO. ROD SIZE (IN.)STANDARD ROD
LENGTHSSTD.CTN.
E-151-3/8 3⁄8 4, 6, 8, 10, 12 100
E-151-1/2 1⁄2 4, 6, 8, 10 100
AB-241L
CAT. NO. BOLT SIZE (IN.)STD.CTN.
AB-241L-1/4 1⁄4 100AB-241L-5/16 5⁄16 100AB-241L-3/8 3⁄8 100AB-241L-1/2 1⁄2 100AB-241L-5/8 5⁄8 100
Located Square Washer
CAT. NO. DESCRIPTIONSIZE(IN.)
DESIGNLOAD LBS.
STD.CTN.
H 122 1/4 1⁄4" Galv-Krom® 1⁄4 150 50
H 122 3/8 3⁄8" Galv-Krom® 3⁄8 590 50
H 122 1/2 1⁄2" Galv-Krom® 1⁄2 1,080 50
H 122 1/4 EG 1⁄4" SilverGalv® 1⁄4 150 50
H 122 3/8 EG 3⁄8" SilverGalv® 3⁄8 590 50
H 122 1/2 EG 1⁄2" SilverGalv® 1⁄2 1,080 50
H 122 1/4 SS6 1⁄4" Type 316 Stainless Steel 1⁄4 150 50
H 122 3/8 SS6 3⁄8" Type 316 Stainless Steel 3⁄8 590 50
H 122 1/2 SS6 1⁄2" Type 316 Stainless Steel 1⁄2 1,080 50
Trapnut® Strut Fastener
H 122 3⁄8Trapnut ® Strut
Fastener Galv-Krom®
H 122 3⁄8 EGTrapnut ® Strut
Fastener SilverGalv®
www.tnb.com
16
Hardware/Threaded Rod
Threaded Hardware
E-142 Hex Head Cap Screw (less nut)
For Connections of Fittings to Channels, Use H-113-A for 3⁄4" Deep Channels and
H-113-B for all other Channels. GlavKrom® finish.
E-142 Hex Head
CAT. NO. SIZE IN INCHES WT. IN LBS./C
E-142 — 1/4 X 1 1⁄4 x 1 1
E-142 — 1/4 X 1 1/4 1⁄4 x 11⁄4 2
E-142 — 1⁄4 X 1 1/2 1⁄4 x 11⁄2 2
E-142 — 1/4 X 2 1/4 1⁄4 x 21⁄4 3
E-142 — 3/8 X 3/4 3⁄8 x 3⁄4 3
E-142 — 3/8 X 1 3⁄8 x 1 4
E-142 — 3/8 X 1 1/4 3⁄8 x 11⁄4 4
E-142 — 3/8 X 1 1/2 3⁄8 x 11⁄2 5
E-142 — 3/8 X 2 1/4 3⁄8 x 21⁄4 7
E-142 — 1/2 X 15/16 1⁄2 x 15⁄16 9
E-142 — 1/2 X 1 1/4 1⁄2 x 11⁄4 9
E-142 — 1/2 X 1 1/2 1⁄2 x 11⁄2 10
E-142 — 1/2 X 2 1⁄2 x 2 14
E-142 — 1/2 X 2 1/2 1⁄2 x 21⁄2 16
E-145 Hex NutFor Cap Screw Applications.
GalvKrom® Finish.
E-145 Hex Nut
CAT. NO. SIZE IN INCHES WT. IN LBS./C
E-145 — 1/4 1⁄4 1.2
E-145 — 5/16 5⁄16 2.0
E-145 — 3/8 3⁄8 3.2
E-145 — 1/2 1⁄2 5
E-145 — 5/8 5⁄8 9
E-142 — 3/4 3⁄4 13
E-147 Flat Steel Washer
CAT. NO. SIZE IN INCHES WT. IN LBS./C
E-147 — 1/4 1⁄4 .67
E-147 — 5/16 5⁄16 1.2
E-147 — 3/8 3⁄8 2.0
E-147 — 1/2 1⁄2 3.85
E-147 — 5/8 5⁄8 7.70
E-147 — 3/4 3⁄4 9
E-148 Lock Washer
CAT. NO. SIZE IN INCHES WT. IN LBS./C
E-148 — 1/4 1⁄4 .259
E-148 — 3/8 3⁄8 .55
E-148 — 1/2 1⁄2 1.436
E-148 — 5/8 5⁄8 2.587
E-148 — 3/4 3⁄4 4.293
E-149 Slotted Hex Indented Head Machine Screw
CAT. NO. SIZE IN INCHES WT. IN LBS./C
E149 1/4 3/4 1⁄4 x 3⁄4 1.6
E149 1/4 1 1⁄4 x 1 2.0
E149 5/16 1 1/4 5⁄16 x 11⁄4 3.0
E149 3/8 1 1/4 3⁄8 x 11⁄4 7.2
E-150-S Lag Bolt Screw
CAT. NO. SIZE IN INCHES WT. IN LBS./C
E150S 3/8 1 1/2 3⁄8 x 11⁄2 5.0
E150S 3/8 2 3⁄8 x 2 5.6
E150S 3/8 2 1/2 3⁄8 x 21⁄2 8.0
E150S 3/8X3 3⁄8 x 3 9.0
E150S 1/2 1 1/2 1⁄2 x 11⁄2 12.0
E150S 1/2 2 1⁄2 x 2 13.0
E150S 1/2X2 1/2 1⁄2 x 21⁄2 16.0
E150S 1/2X3 1⁄2 x 3 18.0
www.tnb.com
17
Nuts & Bolts
Fender Washer
CAT. NO.SIZE(IN.)
DIA.(IN.)
HOLESTD. (IN.)
STD.CTN.
EF147 1/4 1⁄4 11⁄4 5⁄16 100
EF-147-3/8 3⁄8 11⁄2 7⁄16 100
EF-147-1/2 1⁄4 2 9⁄16 100
EF-147
A-177 to A-180
A
E-120
A
B
Swivel Eye with Stud
CAT. NO.A
(IN.)B
(IN.)DESIGN
LOAD LBS.STD.CTN.
E130 3/8 13⁄8 3⁄8 1,000 25
E-130-1/2 11⁄2 1⁄2 1,800 25
E-130
A
B
Swivel Joint with Stud
CAT. NO.A
(IN.)B
(IN.)
DESIGNLOADLBS.
STD.CTN.
E131 3/8 13⁄8 3⁄8 1,000 25
E-131-1/2 11⁄2 1⁄2 1,800 10
Standard Finish – GoldGalv®, unless otherwise stated.
E-122
A
A
B
E-131
B
A
A
Springless Stud Nut
CAT. NO.BOLT
DIA. (IN.)LENGTHA (IN.)
STD.CTN.
A177 1/4 1 1⁄4 1 50
A-177-1/4 X 1 1/4 1⁄4 11⁄4 250
A-179-3/8 X 1 3⁄8 1 250
A-179-3/8 X 1 1/4 3⁄8 11⁄4 50
A-180-1/2 X 1* 1⁄2 1 250
A-180-1/2 X 1 1/4* 1⁄2 11⁄4 250
* Cannot be used with “B” Series channel.Standard Finish – GoldGalv ®, unless otherwise stated.
Swivel Eye
CAT. NO.A
(IN.)B
(IN.)
DESIGNLOADLBS.
STD.CTN.
E120 3/8 13⁄8 3⁄8 1,000 25
E120 1/2 11⁄2 1⁄2 1,800 25
Swivel Joint
CAT. NO.A
(IN.)B
(IN.)
DESIGNLOADLBS.
STD.CTN.
E122 3/8 13⁄8 3⁄8 1,000 25
E-122-1/2 11⁄2 1⁄2 1,800 10
www.tnb.com
18
703Universal Clamp
C-781Mechanical I-Beam Washer
Cushioned PipeA-716 Tube Series/P-716 Pipe Series
Cushioned Pipe StrapU-716, U-717 Omega Series
S-716Cush-A-Strip
6H Series 6H-B Series
6H-TBThreaded Series
6H-TThreaded Series
6H SeriesConduit and Pipe Hanger
Standard Finish — Electro-Galvanized (EG)
Conduit and Pipe Hangers/Beam Clamps/Hanger Supports
700Thin Wall Conduit Clamp
701OD Tubing Pipe Clamp
702Pipe and Rigid or IMC Conduit Clamp
Conduit and Pipe Hangers
KCPC075King Cobra® Cable and Pipe Clamp
CPC075Cobra® One-Piece Cable and Pipe Clamp
For Use with EMT & Rigid
Conduit or Cable
www.tnb.com
19
C-708-UShort Strap for Channel or Wall
Mounting Carbon Steel
C-710Adjustable Clevis Hanger
C-727Adjustable Ring Standard/NFPA
CL-710Light-Duty Clevis Hanger
C-711“J” Pipe Hanger
C-729Adjustable Steel Yoke Pipe Roll
CR-729Roller Support
RC-729 CR-729A C-728
C-728-H PG-795 M-718 C-785Pipe Saddle Support
C-785-APipe Saddle with U-Bolt
C-786Adjustable Pipe Saddle Support
PG-794Pipe Adjustment Guide
C-789 SeriesPipe Covering Protection Saddle
C-790Insulation Protection Shield
Pipe Hangers (Continued)
C-725Medium Pipe Clamp
C-720Riser Clamp
C-720LOffset Pipe Clamp
M-742-RCeiling Flange
S-720Adjustable Pipe Hanger
www.tnb.com
20
Beam Clamps (Conduit Clamps, Mechanical Beam Clamps for Mounting Channels)
C-736Light Welded Steel Bracket
C-739HHeavy Welded Steel Bracket
C-739MMedium Welded Steel Bracket
500 SeriesBeam Clamp
EC ClampMalleable Iron
RC Clamp — Malleable Iron RSC Clamp — Steel
U-571, U-572Conduit Clamp
PC ClampMalleable Iron
U-560Heavy-Duty Beam Clamp
U-562Beam Clamp
U-563Beam Clamp
U-564Wide-Mouthed
Heavy-Duty Beam Clamp
U-568Beam Clamp Safety Strap
US-563Beam Clamp with Swivel Hanger
Conduit and Pipe Hangers/Beam Clamps/Hanger Supports
Welded Brackets
www.tnb.com
21
US-562Beam Clamps with Swing Hanger
U-577Clevis and Swing Connector
S-541Swing Connector
A-597Channel Support Beam Clamp
C-775LClamp with Lock Nut
U-569Beam Clamp
U-570Beam Clamp with Safety Rod
M-775LClamp with Lock Nut
U-579Ceiling Flange
U-510Channel Support Beam Clamp
M-762Side Beam Connector
M-750Side Beam Bracket
540Side Beam Hanger Clip
Beam Clamps/Hanger Supports
C-777Steel Top Beam Clamp
with Lock Nut
C-778Steel Wide Jaw Top Beam Clamp
with Lock Nut
M-777Junior Top Beam C-Clamp
M-778Top Beam C-Clamp
U-576Hanger Clevis
www.tnb.com
22
542Side Beam Hanger Clip
U-514-AChannel Support Beam Clamp
U-501, U-502Support Channel I-Beam Clamp
512Channel Support Beam Clamp
U-514Channel Support Beam Clamp
U-504Channel Support I-Beam Clamp
U-505Channel Support I-Beam Clamp
C-780 W/O HDWWelded Beam Attachment
without Hardware
C-747Adjustable Beam Attachment
C-755 TStandard Beam Clamp
C-769Side Beam Clamp
U-520 SeriesChannel Support Beam Clamp
U-515Channel Support Beam Clamp
U-515-BChannel Support Beam Clamp
U-543Adjustable Screw End Caps
U-543 Wide Flange Beam
A-1200 Channel
Conduit and Pipe Hangers/Beam Clamps/Hanger Supports
Beam Clamps/Hanger Supports (continued)
www.tnb.com
23
QTY. SUPERSTRUT PART NUMBER PRODUCT DESCRIPTION
Order Form
Thomas & Betts Corporation8155 T&B BoulevardMemphis, TN 38125901.252.8000www.tnb.com
©2011 Thomas & Betts Corporation. All rights reserved. Printed in the U.S.A. 02/11/1M
Modular Metal Framing — Overview
Kindorf® Channel’s 11⁄2" is Much More than a Cross-Section Dimension
The 11⁄2" with Kindorf® channel is truly a modular dimension. The channel height, width and prepunched hole spacings are all 11⁄2". The angle fittings and the bolt holes in the angle fittings are all 11⁄2" dimensions. Scribe marks are located at 11⁄2" intervals to mark the midpoint between holes and every 6" on the side for easy measurement.
Jobsite adaptability and structural integrity are the key factors in making strut channel an economical solution to metal framing needs. Kindorf® channel, with its 11⁄2" modular dimensions, enables the installer to do more work with fewer pieces and less labor dollars.
Here’s What the Modular Dimension Can Do for You
Using a 15⁄8" channel with hole spacings on 17⁄8" centers requires numerous fittings and, in many cases, limits the joint fastening to the open side of the channel. Field drilling and welding, plus the need for extra fittings, become the rule rather than the exception. With constant 11⁄2" dimensions throughout the system, many structural joints can be made with a minimum of fittings. Consider the following:
1. The Entire Section Can be Used.
You are not limited to using only the open-slot side because holes line up on channel and fittings. Using the scribe marks ensures the fittings will work and a straight cut is made.
2. Considerable Field Drilling and Welding Eliminated.
The holes are already there and they are usable. Back-to-back, side-to-back, side-to-side — all combinations that can be made using B-995 Kindorf® channel.
3. Field Cutting and Layout Made Simple.
8 scribe marks = 1 ft. Simply count the marks and cut. Position of holes ensures balanced support for trapezes on every piece, thus keeping waste to an absolute minimum.
4. Modular Fittings Fasten to Bolt Side or Slot Side — Unique Stud Nut.
Kindorf® framing fittings are engineered for versatile use — to meet the greatest number of framing combinations with maximum rigidity and security. Fittings may be fastened to the channel on either the bolt-hole side or the slot side.
The matching 11⁄2" dimensions of channel bolt holes and fitting bolt holes provide a fast alignment and quick bolting. Fastening on the slot side provides infinite placement of the nut to match bolting requirements. Either way results in simple “building block” erection and permits multiple application of fittings. With the B-911SN Stud Nut, blind fastening of angles and fixtures is eliminated.
15⁄8" Strut7⁄8" holes cause misalignment.
Fastening on bolt-hole side.
Clamping nut or hex head nut may be used for attachment and security of
fittings to either side of channel.
11⁄2
11⁄2
Stud nut saves time, reduces labor —like having an extra pair of hands.
Fastening on slot side.
Spring nut holds in position without support. Inserts easily in channel and sets automatically — cannot rotate.
11⁄2
11⁄2
Cuts come where they should:
581 Strut
Kindorf
6" 12" 18"
1'
11⁄2
11⁄2
11⁄2
17⁄8
11⁄2
15⁄8
KindorfChannel
StandardChannel
®
3 ll 6 ll 9 ll 12 ll
Holes in fittings also line up.Kindorf ® 11⁄2All holes line up — all the time.
11⁄2
11⁄2
11⁄2
11⁄2
11⁄211⁄211⁄2
11⁄2
Channel with bolt holes 9⁄16" dia. holes on 11⁄2" centers for 11⁄2" bolts.
Why Kindorf® 11⁄2" Channel Saves You Labor Dollars