sunpower panel spec
TRANSCRIPT
The planet´s most powerful solar panel.
The SunPowerTM 320 Solar Panel provides today’s highest efficiency
and performance. Utilizing 96 back-contact solar cells, the SunPower
320 delivers a total panel conversion efficiency of 19.6%. The 320
panel’s reduced voltage-temperature coefficient, anti-reflective glass and
exceptional low-light performance attributes provide outstanding energy
delivery per peak power watt.
E19 / 320 SOLAR PANELMAXIMUM EFFICIENCY AND PERFORMANCE
SPR-320E-WHT-D
BENEFITS
Highest EfficiencySunPowerTM Solar Panels are the most efficient photovoltaic panels on the market today.
More PowerOur panels produce more power in the same amount of space—up to 50% more than conventional designs and 100% more than thin film solar panels.
Reduced Installation CostMore power per panel means fewer panels per install. This saves both time and money.
Reliable and Robust DesignProven materials, tempered front glass, and a sturdy anodized frame allow panel to operate reliably in multiple mounting configurations.
SunPower’s High Efficiency Advantage
0%
5%
10%10%
14%15%
20%
Thin Film Conventional SunPowerE18 Series
SunPowerE19 Series
18% 19%
CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT.Visit sunpowercorp.com for details
SUNPOWER and the SUNPOWER logo are trademarks or registered trademarks of SunPower Corporation. © September 2010 SunPower Corporation. All rights reserved. Specifications included in this datasheet are subject to change without notice.
sunpowercorp.comDocument #001-64281 Rev** / LTR_EN
Electrical DataMeasured at Standard Test Conditions (STC): irradiance of 1000W/m², AM 1.5, and cell temperature 25° C
Peak Power (+5/-3%) Pmax 320 W
Efficiency η 19.6 %
Rated Voltage Vmpp 54.7 V
Rated Current Impp 5.86 A
Open Circuit Voltage Voc 64.8 V
Short Circuit Current Isc 6.24 A
Maximum System Voltage UL 600 V
Temperature Coefficients Power (P) -0.38% / K
Voltage (Voc) -176.6mV / K
Current (Isc) 3.5mA / K
NOCT 45° C +/-2° C
Series Fuse Rating 15 A
Tested Operating Conditions
Temperature -40° F to +185° F (-40° C to + 85° C)
Max load 113psf 550 kg/m² (5400 Pa), front (e.g. snow) w / specified mounting configurations 50 psf 245 kg/m2 (2400 Pa) front and back – e.g. wind
Impact Resistance Hail 1 in (25 mm) at 51mph (23 m/s)
Warranties and Certifications
Warranties 25 year limited power warranty
10 year limited product warranty
Certifications Tested to UL 1703. Class C Fire Rating
Mechanical DataSolar Cells 96 SunPower all-back contact monocrystalline
Front GlassHigh transmission tempered glass with anti-reflective (AR) coating
Junction Box IP-65 rated with 3 bypass diodes
Dimensions: 32 x 155 x 128 (mm)
Output Cables 1000mm length cables / MultiContact (MC4) connectors
FrameAnodized aluminum alloy type 6063 (silver); stacking pins
Weight 41.0 lbs (18.6 kg)
1000 W/m² at 50° C
800 W/m²
500 W/m²
1000 W/m²
200 W/m²
Current/voltage characteristics with dependence on irradiance and module temperature.
Voltage (V)
Curr
ent (
A)
E19 / 320 SOLAR PANELMAXIMUM EFFICIENCY AND PERFORMANCE
Dimensions
2X 153560.45
4X 12.47
2X 91536.02
4X 32212.69
6X 100239.45
2X 11.0.43
2X 261.510.30
8 4.2.17
12 6.6.26
2X 57722.70
4X 230.89.09
4X 1807.07
2X 120047.24
461.81
[.17]2X 4.2
2X 301.18
2X 26210.30
4X 3.2 *.13
104641.18
155961.39
4X 399 *15.70MM
(IN)
* STACKING PIN LOCATIONS
SHEET OFSCALE
SIZE REV.DOCUMENT NUMBER
B
AA
BB
C C
D D
1
12
23
3
4
4
001-53961
MODULE ASSEMBLY, 96-CELL WITH STACKING PIN, DATASHEET DRAWING
**1:12 11
THIS DOCUMENT CONTAINS PROPRIETARYINFORMATION OF THE SUNPOWER CORPORATION, AND ITS RECEIPT ORPOSSESSION DOES NOT CONVEY ANY RIGHTSTO REPRODUCE, DISCLOSE ITS CONTENTS,OR TO MANUFACTURE, USE, OR SELLANYTHING IT MAY DESCRIBE.REPRODUCTION, DISCLOSURE, OR USEWITHOUT SPECIFIC WRITTEN AUTHORIZATIONOF THE SUNPOWER CORPORATION ISSTRICTLY FORBIDDEN.
DRAWN DATE
CHECKEDZ. Kinyon 6/10/09
MATERIAL
FINISH
ALL FILLET RADII .25 MAX
DO NOT SCALE DRAWING
DECIMALS ANGLESNONE 3.X 1.5
1
WITHIN 1/2 SUM TOLERANCES TIR
REMOVE BURRS & SHARP EDGES .25 MAX.
DATE
3939 NORTH FIRST STREETSAN JOSE, CA 95134 USA(408) 240-5500
UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MMTOLERANCES ARE:
001-04212 DRAWING TEMPLATEB SIZE MILLIMETER
Grounding HolesStacking Pins
I-V Curve