sunday 28th august (day...
TRANSCRIPT
10:30 ~ 12:00
Martin PALM , Max-Planck Institute, Germany
13:30 ~ 15:00
Shigehisa NAKA , ONERA, France
15:30 ~ 17:00
Shigenari HAYASHI , Tokyo Institute of Technology, Japan
17:30 ~ 19:00
19:00 ~ 20:00
Mike WEIMER , GE Aviation, USA
20:00 ~ 21:00Welcome Party --------------------------------------------------------------------------------
Oxidation Behavior
Get Together --------------------------------------------------------------------------------
Opening Keynote ---------------------------------------------------------------------------
It Took The World (To Raise a TiAl LPT Blade)Chairperson: Volker GÜTHER , GfE Metalle und Materialien GmbH
Education Seminar 3 -----------------------------------------------------------------------
Sunday 28th August (Day 1)
Education Seminar 1 -----------------------------------------------------------------------
Phase Diagrams and Phase Transformations
Education Seminar 2 -----------------------------------------------------------------------
Mechanical Properties
09:00 ~ 9:20
Chairperson: Masao TAKEYAMA , Tokyo Institute of TechnologyYoshinao MISHIMA 1
1 Tokyo Institute of Technology
09:20 ~ 10:00
Chairperson: Masao TAKEYAMA , Tokyo Institute of Technology
9:20~ PL-01
10:20 ~ 11:30
Chairperson: Rui YANG , Institute of Metal Research
10:20~ 2-01Helmut CLEMENS 1 and Seva MAYER 1
1 Montanuniversität Leoben
10:50~ 2-02
1Helmholtz-Zentrum Geesthacht
11:10~ 2-03Kentaro SHINDO 1
1Mitsubishi Heavy Industries
Monday 29th August (Day 2)
Opening Remarks ---------------------------------------------------------------------------
Plenary Lecture 1 ---------------------------------------------------------------------------
Alloy Development 1 (Wrought Alloys) --------------------------------------------------------------
Plenary Status of Titanium Aluminide for Aero Engine Applications
1 MTU Aero Engines, 2 Montanuniversität LeobenWilfried SMARSLY 1 , Jörg ESSLINGER 1 and Helmut CLEMENS 2
Mechanical Property of Forged Titanium Aluminides
Invited Alloy Design Criteria for Advanced Titanium Aluminides
High Energy X-ray Diffraction as a Tool for TiAl Alloy and Process DevelopmentFlorian PYCZAK 1 , Heike GABRISCH 1 , Michael OEHRING1 , MarcusRACKEL 1 and Andreas STARK 1
13:00 ~ 14:30
Chairperson: Martin PALM , Max Planck Institute
13:00~ 2-04
David HOLEC 1
1 Montanuniversität Leoben
13:30~ 2-05
1 German Aerospace Center
13:50~ 2-06
1 Tohoku University
14:10~ 2-07
Hirotoyo NAKASHIMA1 and Masao TAKEYAMA 1
1 Tokyo Institute of Technology
14:50 ~ 16:00
Chairperson: Bernard BEWLAY , GE Global Research
14:50~ 2-08Antoine PARIS 1 , Dominique DALOZ 2 and Anne DENQUIN1
1 ONERA, 2 Universite de Lorraine
15:20~ 2-09
1 Montanuniversität Leoben
Silicon Distribution and Silicide Precipitation in an Advanced Multi-phase g-TiAl-based Alloy during Annealing
Thomas KLEIN 1 , Boryana RASHKOVA1 , David HOLEC 1 , HelmutCLEMENS 1 and Seve MAYER 1
Microstructures & Mechanical Properties 1 (Microstructure) ----------------------
Invited Silicide Precipitation in Silicon-Doped TiAl Alloys
Fundamentals -------------------------------------------------------------------------------
Invited Application of First Principles Methods in Developments of NovelIntermetallic Alloys
Prediction of High Temperature Deformation Behavior of a g-TiAl Alloy Using aTemperature-sensitive Crystal Plasticity Model
Phase Equilibria, Microstructural Evolution and Mechanical Properties of Ti-Al-C and Ti-Al-Mo-C Alloys
Thermodynamic Calculation of Ti-Al-M Ternary Systems at ElevatedTemperatures
Mohammad Rizviul KABIR 1 and M. Umer ILYAS1
Yuanyuan LU 1 , Masahiro SASAKI 1 , Hidemi KATO 1 and Kyosuke YOSHIMI 1
15:40~ 2-10
Lin SONG1 1 , Hongchao KOU 1 and Jinshan LI 1
1 Northwestern Polytechnical University
16:00 ~ 17:00
Chairperson: Wilfried SMARSLY , MTU Aero Engines
16:00~ 2-11
1 University of Cambridge, 2 Rolls-Royce plc
16:20~ 2-12
16:40~ 2-13
Fantao KONG 1 , Xaiopeng WANG1 and Yuyong CHEN 1
1 Harbin Institute of Technology
Microstructures & Mechanical Properties 2 (Mechanical Properties) ----------------------
Processing, Microstructure and Mechanical Properties of a HighNb Containing TiAl Alloy
Phase Transformation Mechanisms in Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y Alloy afterQuenched from b+a Phase Field and Subsequent Annealing at 800 ºC
Plastic Deformation Behaviour and Crack Initiation Mechanisms of g-TiAl underCompressive and Tensile Uniaxial Loading
Thomas Edward James EDWARDS 1 , Fabio Di GIOACCHINO 1 , Rocio MuñozMORENO1 , Nigel MARTIN 2 , Mark DIXON 2 and William J. CLEGG 1
Deformation at High Temperature of a TiAl Alloy Investigated by TEMJean Phillippe MONCHOUX 1 , Zofia TRZASKA 1 , Alain COURET 1 , DanielCAILLARD 1 and Marc THOMAS 2
1 CEMES-CNRS, 2 ONERA
09:00 ~ 9:40
Chairperson: Shigehisa NAKA , ONERA
9:00~ Pl-02Tomoharu SIKINA 1
1 IHI Corporation
10:00 ~ 11:30
Chairperson: Mike WEIMER , GE Aviation
10:00~ 3-01
Masao TAKEYAMA 1
1 Tokyo Institute of Technology
11:10~ 3-02Koichi SAKAMOTO 1
1 Kobe Steel Ltd
11:40~ 3-03
Satoshi TAKAHASHI 1
1 IHI Corporation
13:00 ~ 14:30
Chairperson: Francis R. PRELI , Pratt & Whitney
13:00~ 3-04
Mauro FILIPINI1 and Stefano BERETTA1
1 Politecnico di Milano
Tuesday 30th August (Day 3)
Plenary Lecture 2 -----------------------------------------------------------------------
Alloy Development 2 (Japanese R&D Project) ---------------------------------------------------------------
Invited Melting Process of Titanium Aluminide
Microstructures & Mechanical Properties 3 (Fatigue) ---------------------------
Invited Activities on TiAl in Japan and Approaches for Jet EngineApplications
Invited The Current Situation and Issues for the Expansion of Applicationof Wrought TiAl Alloys
Plenary Aero-Engine Development and Materials Technology in IHI
Invited Fatigue Cracks in g-TiAl Alloys Produced by AdditiveManufacturing by EBM
13:30~ 3-05
13:50~ 3-06
1 Daido Steel Co., 2 The University of Birmingham
14:10~ 3-07
1 CEMES/CNRS, 2 ICA/CNRS
14:50 ~ 16:00
Chairperson: Sylvia SABBADINI , Avio
14:50~ 3-08
1 Universidad del País Vasco UPV/EHU, 2 Montanuniversität Leoben
15:20~ 3-09
Microstructures & Mechanical Properties 4 (Creep) ---------------------------
Jose San JUAN 1 , Leire USATEGUI 1 , Svea MAYER 2 , Maria L. Nó 1 and HelmutCLEMENS 2
Johannes BRESLER 1 , Marco ZIENER 1 , Steffen NEUMEIER 1 , FlorianPYCZAK 2 and Mathias GÖKEN 1
1 Friedrich-Alexander-Universität Erlangen-Nürnberg,2 Helmholtz-Zentrum Geesthacht
Invited Comparison of creep behaviour in different gamma Ti-Alintermetallics by mechanical spectroscopy
Influence of the Alloying Elements Niobium, Tantalum and Zirconium on theCreep Properties and Microstructure of Fully Lamellar TitaniumAluminides
1 MTU Aero Engine, 2 Aurtrian Academy of Sciences,3 Montanuniversität Leoben
Yoshihiko KOYANAGI 1 , Hiroyuki TAKABAYASHI1 1 , Shigeki UETA 1 , MichaelSWEENEY 2 and Paul BOWEN2
Soumaya NAANANI1 , Jean-Philippe MONCHOUX 1 , Catherine MABRU 2 andAlain COURET 1
R-curve Behaviour of Different Nearly Lamellar Microstructures in anIntermetallic Ti-43.5Al-4Nb-1Mo-0.1B Alloy
High Temperature Crack Propagation Behavior of a Titanium AluminideAlloy Consisting of Lamellar Structure with or without an Equiaxed GammaPhase
Aging and Fatigue Strength of the IRIS Alloy
Martin SCHLOFFER 1 , Thomas LEITNER 2 , Svea MAYER 3 , HelmutCLEMENS 3 , Joerg ESS LINGER 1 , Wilfried SMARSLY 1 and ReinhardPIPPAN 2
15:40~ 3-10
1 Tokyo Institute of Technology
16:00 ~ 17:00
Chairperson: Alain COURET , CEMES
16:00~ 3-11Ji ZHANG 1
1 China Iron and Steel Research Institute Group
16:20~ 3-12
1 University of Birmingham, 2 Rolls Royce plc
16:40~ 3-13
Kuan WANG 1 , Jinshan LI 1 , Jieren YANG 1 and Hongchao KOU 1
1 Northwestern Polytechnical University
A Novel Method to Increase the Ductility of Cast TiAl-Nb Alloys
Microstructures & Mechanical Properties 5 (Mechanical Properties) ----------------------
Flake Boride Precipitates and Their Efffect on Tensile Properties inLamellar TiAl Alloys
Cooling-dependent Microstructure Formation and Tensile Properties of Ti-48Al-2Cr-2Nb Casting Based on Counter-gravity Solidification
Hideki WAKABAYASHI1 , Hirotoyo NAKASHIMA1 , Shigenari HAYASHI 1 andMasao TAKEYAMA 1
Jing LI 1 , Dawei HU 1 , Nigel MARTIN 2 and Mark DIXON 2
Effect of Creep Strain on Dynamic Phase Transformation of TiAl BasedAlloys at 1073 K
09:20 ~ 10:00
Chairperson: Mauro FILIPPINI , Politecnico di Milano
9:20~ Pl-03Bernard BEWLAY 1 , Soumya NAG1 , Akane SUZUKI1 and Mike WEIMER2
1 GE Global Research, 2 GE Aviation
10:20 ~ 11:30
Chairperson: Satoshi TAKAHASHI , IHI Corporation
10:20~ 5-01
Guillaume MARTIN1 and Pierre SALLOT 2
1 SAFRAN SNECMA, 2 SARTAN TECH
10:50~ 5-02Keiji KUBUSHIRO 1 , Satoshi TAKAHASHI 1 and Masao TAKEYAMA 2
1 IHI Corporation, 2 Tokyo Institute of Technology
11:10~ 5-03
13:00 ~ 14:20
Chairperson: Michael SCHUETZE , Dechema
13:00~ 5-04
Rob HAUN1
1 Retech Systems LLC
LMD based Repair Technology for Titanium Aluminide Turbine Blades
1 ACCESS e.V, 2 Fraunhofer Institute for Laser Technology, 3 TLS Technik GmbH undSpezialpulver KG, 4 Laservorm GmbH, 5 Mabotic
Manufactuaring & Processing 1 (Powder production) -------------------------------
Invited Advances in the Systems and Processes for the Production of GammaTitanium Aluminide Bars and Powder
Michael MATHES 1 , Silja RITTINGHAUS 2 , Norbert LUDWIG 3 , Thomas KIMME 4
and Matthias HACKEL 5
Effect of Microstructure on Fatigue Crack Properties in Wrought TiAl Alloy
Thursday 1st Septemer (Day 5)
Plenary Lecture 3 ------------------------------------------------------------------------
Application 1 (LPT) -------------------------------------------------------------------
Plenary TiAl Alloys in Commercial Aircraft Engines
Invited SNECMA Application of Gamma -TiAl Alloys for Low Pressure TurbineBlades: Development Phase, Mass Production and New Opportunities
13:30~ 5-05Richard DOLBEC 1
1 Tekna Plasma Systems Inc.
13:50~ 5-06Paolo FINO 1 , Sara BIAMINO1 and Giorgio BAUDANA 1
1 Politecnico di Torino
14:30 ~ 16:00
Chairperson: Jose San JUAN , University del Pais Vasco
14: 30~ 5-07
15:00~ 5-08Silvia SABBADINI 1
1 Avio Aero SpA
15: 30~ 5-09Vera JUECHTER 1 , Martin FRANKE 2 and Carolin KÖRNER 1
16:20 ~ 17:30
Chairperson: Shigenari HAYASHI , Tokyo Institute of Technology
16:20~ 5-10
Electron Beam Melting of �-TiAl for Automotive Applications
Hiroyuki YASUDA 1 , Tianqi LIU 1 , Mitsuharu TODAI 1 , Ken CHO 1 , KojiHAGIHARA 1 , Takayoshi NAKANO 1 , Ayako IKEDA 2 , Daisuke KONDO 3 , YutoNAGAMACHI 3 , Minoru UEDA3 and Masao TAKEYAMA 4
1 Osaka University, 2 National Institute for Materials Science,3 Metal Technology Co. Ltd., 4 Tokyo Institute of Technology
Production of Spherical Titanium-based Powders Using the Tekna Process
Manufactuaring & Processing 2 (Additive) ---------------------------------------------
Oxidation & Recycling 1 (Recycling & Oxidation) -----------------------------------------
Invited Microstructure and Mechanical Properties of TiAl Alloys AdditivelyManufactured by Electron Beam Melting
Invited Electron Beam Melting of Second and Third Generation TiAl Alloys
Invited Processing of Titanium Aluminides by Selective Electron Beam Melting
1 Universität Erlangen-Nürnberg, 2 Neue Materialien Fürth GmbH
Volker GÜTHER 1 , Holger KEITEL 1 , Joachim KLOSE 2 and Christiane ROTHE 2
1 GfE Metalle und Materialien GmbH, 2 GfE Fremat GmbH
Invited Development of an Industrial Recycling Technology for TiAl Revert
16:50~ 5-11
17:10~ 5-12
1 Helmholtz Zentrum Geestahcht
17:30 ~ 18:50
Chairperson: Guillaume MARTIN , SAFRAN SNECMA
17:30~ 5-13
Michael SCHÜTZE 1
1 DECHEMA
18:00~ 5-14
18:30~ 5-15
1 DECHEMA-Forschungsinstitut, 2 Montanuniversität Leobe
Alexander DONCHEV1 , Raluca PFLUMM1 , Mathias GALETZ 1 , Svea MAYER 2 ,Helmut CLEMENS 2 and Michael SCHÜTZE 1
Daisuke MATSUWAKA 1 , Fumiaki KUDO1 , Tetsushi DEURA 1 ,Yu-ki TANINOUCHI 2 , and Toru H. OKABE 2
1 Kobe Steel Ltd, 2 The University of Tokyo
Jonathan PAUL 1 , Michael OEHRING1 , Fritz APPEL 1
and Florian PYCZAK
Shigenari HAYASHI 1 , Shaaban ALI 1 , Shinji OIKAWA 2 , Takeshi IZUMI 2 , ShinyaIMANO2 , Akira YOSHINARI 2 , Jun SATO2 and Masao TAKEYAMA 1
Invited High Temperature Oxidation Behavior of TiAl Alloys at 800 °C in Air
Protection of TNM-based Alloys against Oxidation by the Fluorine Effect
1 Tokyo Institute of Technology, 2 Mitsubishi Hitachi Power Systems
Near-surface Residual Stress in TiAl after High Temperature Exposure
Invited Protection of TiAl Alloys against Oxidation and EnvironmentalEmbrittlement
Oxidation & Recycling 2 (Oxidation) ----------------------------------------------------
Surface Treatment of TiAl Using Halide Flux
09:00 ~ 9:40
Chairperson: Helmut CLEMENS , Montanuniversität Leoben
9:00~ Pl-04Rui YANG 1
1 Institute of Metal Research
10:00 ~ 11:30
Chairperson: Dawei Hu , University of Birmingham
10:00~ 6-01
10:30~ 6-02
1 Access e.V.
10:50~ 6-03
Janny LINDEMANN 1 , Sebine DECKER 2 , Volker GÜTHER 3 and Lutz KRÜGER 2
11:10~ 6-04Keizo HASHIMOTO1
1 Teikyo University
Necessary Properties for Matrix TiAl in CVD SiC Fiber Reinforced Composites
Friday, September 2nd (Day 6)
Plenary Lecture 4 ---------------------------------------------------------------------------
Manufactuaring & Processing 3 (Processing) ---------------------------------------------------------------------------
Plenary Development of Cost-effective Processes for Gamma-TiAl Application
Invited Research Advances in TiAl Intermetallics Precision Hot Processing
Yuyong CHEN 1 , Fantao KONG 1 , Jing TIAN 1 , Shulong XIAO 1 and Xaiopeng WANG1
1 Harbin Institute of Technology
Todor STOYANOV 1 , Matthias BUENCK 1 , Julio AGUILAR1 and AndreSCHIEVENBUSCH 1
1 GfE Fremat GmbH, Freiberg, 2 Institute of Materials Engineering,3 GfE Metalle und Materialien GmbH
Challenges and opportunities by setting-up a TiAl investment casting technology toreach TRL6
Novel TiAl Particle Reinforced Titanium Matrix Composites - Manufacturing andMechanical Properties
13:00 ~ 14:20
Chairperson: Koichi SAKAMOTO , Kobe Steel Ltd
13:00~ 6-05Masami HOSHI 1
1 Honda R&D co.,Ltd.
13:30~ 6-06Dong LIU 1 , Renci LIU 1 , Yuyou CUI 1 and Rui YANG 1
1 Institute of Metal Research
14:00~ 6-07
14:20 ~ 15:50
Chairperson: Kyosuke YOSHIMI ,Tohoku University
14:20~ 6-08
Oliver MARTIN1
1 MECACHROME
14:50~ 6-09
1 Fraunhofer IFAM, 2 Politecnico di Torino, 3 TWI Limited
15:30~ 6-10
1 Access e.V., 2 WZL
Invited Application of TiAl for Automotive Racing Engine
Invited A New Processing Route for Forged TiAl Automotive Engine Valves
Olivier LEHMANN1 , Holger FELLMANN 1 , Michael BURTSCHER 2 , ThomasKLEIN 2 , Helmut CLEMENS 2 , Svea MAYER 2 , Janny LINDEMANN 3 and VolkerGÜTHER 4
1 Märkisches Werk GmbH, 2 Montanuniversität Leoben,3 GfE Fremat GmbH, 4 GfE Metalle und Materialien GmbH
Burghardt KLÖDEN 1 , Alexander KIRCHNER1 , Thomas WEISSGAERBER1 , BenardKIEBACK1 , Sara BIAMINO2 , Giorgio Baudana 2 and Anita BUXTON 3
Alexander GUSSFELD 1 , Can HUANG 1 , Julio AGUILLAR 1 , Tim HERRIG2 ,Maximilian HOLSTEN 2 and Fritz KLOCKE 2
Manufactuaring & Processing 4 (Automotive) --------------------------------------------------------------------------
Invited g-Titanium Aluminide Machining : MECACHROME IndustrialTestimonial
Processing of RNT650 for Automotive Application by Electron Beam Melting(EBM)
Development of an Investment Casting Process for the Production of Gamma-TiAlTurbocharger Wheels Finishied by Heat-performance ECM- and EDM-machining
Microstructural and Mechanical Characterization of a Hot-extruded TiAl Alloyfor High-performance Rascing Applications
Application 2 (Automotive) --------------------------------------------------------------------------
P-01
Satoru KOBAYASHI 1 and Masao TAKEYAMA 1
1 Tokyo Institute of Technology
P-02Shulong XIAO 1 , Shouzhen CAO1 , Lijuan XU 2 , Jing TIAN 1 and Yuyong CHEN 1
1 Harbin Institute of Technology
P-03Qing JIA 1 , Ronghua LIU 1 , Wei LI 1 , Yuyou CUI 1 and Rui YANG 1
1 Institute of Metal Research
P-04
P-05
Renci LIU 1 , Dong LIU 1 , Yuyou CUI 1 and Rui YANG 1
1 Institute of Metal Research
P-06
1 Tokyo Institute of Technology
P-07Rikako YOSHIDA 1 , Hirotoyo NAKASHIMA1 and Masao TAKEYAMA 1
1 Tokyo Institute of Technology
Centrifugal Investment Casting of Gamma TiAl Automotive Engine Pistons
Monday 29th & Tuesday 30th, August (Day 2 & Day 3)
Poster Presentation ---------------------------------------------------------------------------------------------------------------------------------------------------
Tempering of Martensite Formed by b�a Phase Transformation in g-TiAl Based AlloysContaining a b Stabilizing Element
Study on CaZrO3 as a Facecoat Materials in the Investment Casting of TiAl Alloys
Chairpersons: Satoru KOBAYASHI, Hirotoyo NAKASHIMA , Tokyo Institute of Technology
Applicability of TiAl Forging Alloy for Steam Turbine Blades
Microstructure and Texture Characteristics of Extruded Ti-47Al-2Cr-2Nb-0.15B withDifferent Initial Microstructure of Billets
Phase Equilibria among b-Ti/a2-Ti3Al/g-TiAl Phases in Ti-Al-M Ternary Systems at1273 K
Soft X-ray Spectroscopy of Carbon in Solution in the Phases Present in TiAl Alloys
Shinji Oikawa 1 , Jun SATO1 , Shinya IMANO 1 , Akira YOSHINARI 1 , Takeshi IZUMI 1 ,Shigenari HAYASHI 2 , Ali SHAABAN2 and Masao TAKEYAMA 2
1 Mitsubishi Hitachi Power Systems, LTD., 2 Tokyo Institute of Technology
Loris SIGNORI 1 , Hirotoyo NAKASHIMA1 , Satoru KOBAYASHI 1 and Masao TAKEYAMA 1
P-08
1 Tokyo Institute of Technology
P-09
P-10Kaifeng ZHANG 1 , Yuanxin WANG 1 , Baoyong LI 1, 2 , Wei YAO 2 and Kai WU 2
P-11
1 Harbin Institute of Technology
P-12
Tiebang ZHANG 1 , Zeen WU1 , Hongchao KOU 1 and Jinshan LI 1
1 Northwestern Polytechnical University
P-13
1 ONERA
Petra ERDELY 1 , Peter SRATON2 , Emad MAAWAD 2 , Norbert SCHELL 2 , VolkerGÜTHER 3 , Christiane ROTHE 4 , Joachim KLOSE 4 , Svea MAYER 1 and Helmut CLEMENS 1
1 Montanuniversität Leoben, 2 Helmholtz-Zentrum Geesthacht, Geesthacht,3 GfE Metalle und Materialien GmbH, 4 �GfE Fremat GmbH
1 Harbin Institute of Technology,2 �Beijing Hangxing Technology Development Co. LTD
Jing TIAN 1 , Dongdong ZHANG 1 , Shulong XIAO 1 , Lijuan XU 1 , Jiamchao HAN 1 , ShouzhenCAO 1 , Xiaopeng WANG1 , Ping SUN 1 and Yuyong CHEN 1
High Temperature Deformation Behaviors of Sintered Ti-22Al-25Nb Alloy
The Influence of Adding Nanometer-scale Y2O3 on Microstructure and RoomTemperature Tensile Properties of As-cast Ti48Al2Cr2Nb
Mechanical Properties and Environment Induced Embrittlement of a High NbContaining TiAl Alloy
Influence of Minor Elements Additions on Microstructure and High TemperatureBehaviour of the Ti-43.5Al-1Mo-4Nb-0.1B Alloy
Zhao HUVELIN 1 , Anne DENQUIN1 , Loris SIGNORI 1 , Mikael PERRUT1 , AgnèsBACHELIER-LOCQ1 and Shigehisa NAKA 1
Partitioning of Oxygen among the Phases Present in TiAl Alloys at ElevatedTemperatures
Arata KINOUCHI 1 , Hirotoyo NAKASHIMA1 , Satoru KOBAYASHI 1 and MasaoTAKEYAMA 1
Evolution of Texture and Microstructure in Multi-phase TNM Sheets During Hot Rollingand Subsequent Heat Treatments
P-14
1 Ruhr-Universität Bochum, 2 Deutsches Zentrum für Luft- und Raumfahrt
P-15
Sebastian BOLZ 1 , Marcus DOMINICK1 , Sabine WEIß1 and Marcus RACKEL 2
P-16Carolin PUSCHOLT 1 and Mathias GÖKEN 1
1 Friedrich-Alexander University Erlangen-Nürnberg
P-17
P-18
1 Tokyo Institute of Technology
P-19
Nikolai WIECZOREK 1 , Dennis LANGENKAEMPER 1 , Guillaume LAPLANCHE 1 , ChristophSOMSEN1 , Marion BARTSCH 2 , Klaus NEUKING and Gunther EGGELER 1
1 Technical University Cottbus Senftenberg, 2 Helmholtz-Zentrum Geesthacht
Microstructure Evolution During Long Term Temperature Exposure and its Impact onMechanical Properties
Elementary Deformation Processes During In Situ SEM Microshear Behavior of a Near-g Ti-Al alloy
In-situ TEM Indentation of a2/g Interfaces in Binary TiAl Crystals
Fatigue Properties of TiAl Alloys Prepared by Electron Beam Melting
In-situ Observation of Tensile Deformation and Cracking Behaviour of TiAl based Alloyat 1073 K
Spraying of TiAlNbTa-based Powder and Microstructure Evolution of CoatingsManufactured by Warm Spray Technique
Ken CHO 1 , Ryota KOBAYASHI1 , Hiroyuki Y. YASUDA1 , Mitsuharu TODAI 1 , TakayoshiNAKANO 1 , Ayako IKEDA 2 , Daisuke KONDO 3 , Yuto NAGAMACHI 3 , Minoru UEDA3 andMasao TAKEYAMA 4
1 Osaka University, 2 National Institute for Materials Science,3 Metal Technology Co. Ltd., 4 Tokyo Institute of Technology
Taiki NAKAMURA 1 , Shin USUI 1 , Hirotoyo NAKASHIMA1 , Satoru KOBAYASHI 1 , MasaoTAKEYAMA 1
Maciej GIZYNSKI 1, 2 , Shiho MIYAZAKI 1, 3 , Judyta SIENKIEWICZ 2 , Seiji KURODA1 ,Hiroshi Araki 1 , Hideyuki MURAKAMI1 , Zbigniew PAKIELA 2 and Atsushi YUMOTO 3
1 National Institute for Materials Science, 2 Warsaw University of Technology,3 Shibaura Institute of Technology
P-20
P-21
P-22
P-23Keiji KUBUSHIRO 1 , Satoshi TAKAHASHI 1 and Masao TAKEYAMA 2
1 IHI Corporation, 2 Tokyo Institute of Technology
P-24
Xiaopeng WANG1 , Yu ZHANG 1 , Fantao KONG 1 and Yuyong CHEN 1
1 Harbin Institute of Technology
P-25
Liu RONGHUA 1 , Qing JIA 1 , Wei LI 1 , Yuyou CUI 1 , Paul WITHEY 2 and Rui YANG 1
1 Institute of Metal Research, 2 Rolls-Royce Plc
P-26GELPI THIBAUT 1 , Christophe COLIN 1 and André MALIÈ 2
The Influence of Aerofoil Structure on Metallurgical Quality of Cast TiAl TurbineBlades
Origin of Enhanced Ductility of TiAl Alloys: A Hybrid Study Using In-situ TransmissionElectron Microscopy Experiments and Molecular Dynamics
Atomic Relaxation Processes at High Temperature in Gamma Ti-Al Intermetllics Family
Analysis of Longitudinal Twinning in g-TiAl by Micropillar Compression with Strain andCrystal Orientation Mapping
Effect of Microstructure on Fatigue Crack Properties in Wrought TiAl Alloy
Evaluation of Microstructure and Mechanical Properties of Ti-43Al-9V-Y Alloy Sheet byHot-pack Rolling
Seong-Woong KIM 1 , Seung-Hwa RYU 2 , Young-Sang NA 1 , Seung-Eon KIM 1 , Jong-TaekYEOM 1 and Andew M. MINOR 3
1 Korea Institute of Materials Science, 2 Korea Advanced Institute of Science and Technology,3 Lawrence Berkeley National Laboratory
Jose San JUAN 1 , Leire USATEGUI 1 , Svea MAYER 2 , Maria L. Nó 1 and Helmut CLEMENS 2
1 Universidad del País vasco UPV/EHU, 2 Montanuniversität Leoben
Thomas EDWARDS 1 , Fabio Di GIOACCHINO 1 , Rocio Muñoz MORENO 1 , NigelMARTIN 2 , Mark DIXON 2 and William. J. CLEGG 1
1 University of Cambridge, 2 Rolls-Royce plc
1 MINES ParisTech, PSL Research University, 2 SAFRAN/SNECMA
Development of Crack Free g-TiAl Elaborated by Direct Metal Deposition.
P-27
P-28
P-29
P-30Yusuke Asomura 1 , Masao TAKEYAMA 1 and Shigenari HAYASHI 1
1 Tokyo Institute of Technology
P-31
1 Andong National University, 2 National Research Council of Canada
1 Tokyo Institute of Technology, 2 Mitsubishi Hitachi Power Systems,3 Central Metallurgical Research and Development Institute
Andreas STARK 1 , Marcus RACKEL 1 , Michael OEHRING1 , Norbert SCHELL 1 ,Lars LOTTERMOSER 1 and Florian PYCZAK 1
1 Helmholtz-Zentrum Geesthacht
Katja HAUSCHILDT 1 , Andreas STARK 1 , Norbert SCHELL 1 , Martin MÜLLER 1 andFlorian PYCZAK 1
1 Helmholtz-Zentrum Geesthacht
Ali SHAABAN1, 3 , Shigenari HAYASHI 1 , Masao TAKEYAMA 1 ,� Jun SATO 2 , TakeshiIZUMI 2 , Akira YOSHINARI 2 , Shinji OIKAWA 2 and Shinya IMANO 2
Effect of heat treatment conditions on microstructures of TiAl based alloys with Nb andV additions
Dongyeop KEUM 1 , Dongyi SEO 2 and Daejin KIM 1
Effect of Water Vapor on Oxidation of TNM Alloy
The Effect of Microstructure on the Oxidation Behavior of TiAl-ed Based Alloys
Hot Forming of Titanium Aluminide Alloys Studied by in Situ Synchrotron RadiationExperiments
Microstructure Development and Mechanical Strength of Diffusion Brazed g-TiAl AlloyJoints