summit aerospace | aircraft maintenance repair and...
TRANSCRIPT
-
a. The certificate holder, in accordance with the reference paragraphs, is authorized to:
b. The certificate holder is not authorized and shall not:
A004 . Summary of Special Authorizations and Limitations HQ Control: 09/23/1998HQ Revision: 010
ReferenceParagraphs
Use an approved electronic recordkeeping system, electronic/digital signature, and/or electronic media. A025
Perform work, including continuous operations, at additional locations other than at its primary fixed location. A101
Conduct operations choosing to have an antidrug and alcohol misuse prevention program. A449
ReferenceParagraphs
Use Exemptions. A005Perform maintenance with NAA ratings where the scope of work is authorized by a BASA/MIP. A060
Perform maintenance in accordance with foreign repair station geographic authorizations. B050
Perform work, excluding continuous operations, at additional locations other than at its primary Fixed Location. D100
Perform line maintenance for cert. holders conducting operations under Parts 121 and 135 and for foreign carriers/persons operating U.S. registered aircraft in common carriage under Part 129, apart from D100 which authorizes that work away from station.
D107
U.S. Department of Transportation Federal Aviation Administration Operations Specifications
Print Date: 4/9/2010 A004-1Summit Aerospace, Inc.
Certificate No.: E6QR207X
-
U.S. Department cifTransportation Federal Aviation Administration Operations Specifications
1. Issued by the Federal Aviation Administration. 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator .
.:!1I111.0-UJ9117:3}1;31 C:clllmi J);I)lighl TiJll~ lill'alill1l; \V~hl)PSS Digilally Siglll'd hy Thumas W I hlJl:illll, I'rinl'ipal ;'\'lainil.!ll:IllI.'l.! -Inspcdnr (SO I'}i
4. Date Approval is effective: 04/0912010 Amendment Number: 9 5. I hereby accept and receive the Operations Specifications in this paragraph.
Encalada, Rodrigo, Director of Quality
Print Date: 4/91201 0 AOO4-2 Summit Aerospace, Inc,
Date: 04/09/2010
Certificate No.: E6QR207X
-
Table 1
d. Limitations and Provisions.
The certificate holder has 50 or more safety-sensitive employees.
FAA Drug an Alcohol Registration number CONN898B
A449 . Antidrug and Alcohol Misuse Prevention Program HQ Control: 07/17/2009HQ Revision: 00a
a. The Part 145 repair station certificate holder has elected to implement an Antidrug and Alcohol Misuse Prevention Program, because the certificate holder performs safety-sensitive functions for a 14 CFR Part 121, and 135 certificate holder and/or for a 14 CFR Part 91 operator conducting operations under Section 91.147.
b. The certificate holder certifies that it will comply with the requirements of 14 CFR Part 120 and 49 CFR Part 40 for its Antidrug and Alcohol Misuse Prevention Program.
c. Antidrug and Alcohol Misuse Prevention Program records are maintained and available for inspection by the FAA’s Drug Abatement Compliance and Enforcement Inspectors at the location listed in Table 1 below:
Location & Telephone of Antidrug and Alcohol Misuse Prevention Program Records:
Telephone Number: A1 (305) 888-4050Address: 4483 NW 36th StreetAddress: N/A
City: MiamiState: FL
Zip code: 33166
(1) Antidrug and Alcohol Misuse Prevention Program inspections and enforcement activity will be conducted by the Drug Abatement Division. Questions regarding these programs should be directed to the Drug Abatement Division.
(2) The certificate holder is responsible for updating this operations specification when any of the following changes occur:(a) Location or phone number where the Antidrug and Alcohol Misuse Prevention
Program Records are kept.(b) If the certificate holder’s number of safety-sensitive employees goes to 50 and
above, or falls below 50 safety-sensitive employees.(3) The certificate holder with 50 or more employees performing a safety-sensitive
function on January 1 of the calendar year must submit an annual report to the Drug Abatement Division of the FAA.
(4) The certificate holder with fewer than 50 employees performing a safety-sensitivefunction on January 1 of any calendar year must submit an annual report upon request of the Administrator, as specified in the regulations.
U.S. Department of Transportation Federal Aviation Administration Operations Specifications
Summit Aerospace, Inc. A449-1Amdt. No: 7
Certificate No.: E6QR207X
-
u.s. Department of Transportation Federal Aviation Administration Operations Specifications
I. Issued by tbe Federal Aviation Administration. 2. These Operations Specifications are approved by direction of tbe Administrator.
•
Digitally signed by John Kirkland on behalf of HANSON, THOMAS W, Principal Maintenance Inspector (SO 19) [I] EFFECTIVE DATE: 9116/20 13, [2] AMENDMENT#: 7 DATE: 2013.09. 1612:19:42 -05:00
3. I hereby accept and receive the Operations Specifications in this paragraph.
~Et. \(0) 2 ~\.3.
·Espinoz anager, 145 Date
Summit Aerospace, Inc. A449-2 Certificate No.: E6QR207X Amdt. No: 7
-
EASA Form 3 – U.S. Approval Certificate Rev 1
Page 2 of 2
U.S. APPROVAL CERTIFICATE
EASA.145.5462
Taking into account the provisions of Article 12 of Regulation (EC) 216/2008 of the European Parliament and of the Council and the bilateral agreement currently in force between the European Community and the Government of the United States of America, the European Union Aviation Safety Agency (EASA) hereby certifies:
Summit Aerospace, Inc. FAA NUMBER: E6QR207X
8130 NW 74th Ave. Medley, Florida 33166
United States of America
as a Part-145 maintenance organization approved to maintain the products listed in the FAA Air Agency Certificate and associated Operations Specifications and issue related certificates of release to service using the above reference, subject to the following conditions:
1. The scope of the approval is limited to that specified on the 14 CFR part 145 repair station Air Agency Certificate, and the associated Operations Specifications for work carried out in the United States (unless otherwise agreed in a particular case by EASA).
2. The approval scope shall not exceed the permitted EASA Part-145 ratings as detailed in Regulation EC (No) 1321/2014.
3. This approval requires continued compliance with 14 CFR part 145 and the differences as specified in the Maintenance Annex Guidance (MAG), including the use of the FAA Form 8130-3 for release/return to service of components up to and including power plants.
4. Certificates of return to service must quote the EASA Part-145 approval reference number quoted above and the 14 CFR part 145 Air Agency Certificate number.
5. Subject to compliance with the foregoing conditions, this approval shall remain valid until:
01 May 2022
unless the approval is surrendered, superseded, suspended or revoked.
Date of issue: 08 April 2020
Signed
For EASA
-
.>>>>>>>>>>>
ISO 9001:2015 + AS9110C
Inspection, test, repair of design, and overhaul of aircraft power generation components, accessories, landing gears and avionics for commercial and military applications.
Certificate No.: CERT-0129798 Original Certification Date: May 3, 2013 File No.: 1640747 Certification Effective Date: May 3, 2019 Re-Issue Date: May 23, 2019 Certification Expiry Date: May 2, 2022
SUMMIT AEROSPACE 8130 NW 74th Avenue, Medley, Florida 33166 USA
The above organization has been audited in accordance with the requirements of AS9104/1:2012. QMI-SAI Canada Limited (SAI Global) located in Toronto, Ontario, Canada is accredited under the Industry Controlled Other Party (ICOP) scheme. The certificate is issued at the accreditation location in Toronto, Canada.
This is to certify that
operates a
which complies with the requirements of
for the following scope of certification
Quality Management System
________________________________________________________________________________
Registered by: QMI-SAI Canada Limited, (SAI Global) 20 Carlson Court, Suite 200, Toronto, Ontario M9W 7K6 Canada. This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request. To verify that this certificate is current, please refer to the SAI Global On-Line Certification Register: www.qmi-saiglobal.com/qmi_companies/
CERTIFICATE OF REGISTRATION
AS9110C
Heather Mahon Global Head of Technical Services SAI Global Assurance
http://www.qmi-saiglobal.com/qmi_companies/
-
Certïficate of Accreditatïon
Reference number
MAA-NLD A-145-025
Pursuant to the Netherlands Military Aviation Authority fMAA-NLD) Policy on Accreditation of anOrganisation not part of the Netherlands Ministry of Defence and subject to the conditions specified below,the MAA-NLD declares that
Summit Aerospace mc.
8130 N.W. 741H AvenueMedley, FL 33166 USA
is accredited as a MAA-NLD Accredited Maintenance Organisation performing identified services andactivities applicable to those specific products in service with the Netherlands Ministry of Defence listed onthe attached Overview of Accreditation.
Conditions
1. This accreditation is valid whilst the MAA-NLD A-1 45-025 maintenance organisation remains incomptiance with the current SUMMIT (14 CFR 145) RSM/QCM, the European Aviation Safety Agency(EASA) Part 145 Suppiement, the AS91 1 CC QSM and its related procedures, and the NetherlandsNLD-MAR-1 45 Supplement;
2. The MAA-NLD A-1 45-025 maintenance organisation notifies the MAA-NLD in casa of a change in the
Military Capability List and of significant changes regarding its organisation, key personnel and
documented procedures. The MAA-NLD A-145-025 maintenance organisation updates its
documented procedures resulting from any change to regulations in a timely manner to ensure
effective implementation and will inform the MAA-NLD accordingly. Notification e-mail address is
3. The MAA-NLD A-145-025 maintenance organisation maintains a program of continued surveillance
and intemal quality monitoring;
4. The MM-NLD is granted access to the MAA-NLD A-1 45-025 maintenance organisation facilities;
5. As long as the MAA-NLD A-1 45-025 maintenance organisation is in compliance with the foregoingconditions, this accreditation remains valid until December 31, 2023 (refer to Contract 4600122465,Appendix A), unless the accreditation has previously been surrendered, superseded, suspended orrevoked.
Place and date of issue
Den Haag, 19 November 2019
].P.Air
For the Netherlandsthe Director Military
MAA-NLD Forni 304 Certticate of Organisation Accreditation (version 1) 1/3
Air Agency CertificateOps Spec Part AOps Spec A001-1Ops Spec A001-2Ops Spec A002-1Ops Spec A002-1Ops Spec A002-2Ops Spec A002-3Ops Spec A003-1Ops Spec A003-2Ops Spec A004-1Ops Spec A004-2Ops Spec A007-2Ops Spec A007-1Ops Spec A00-2Ops Spec A025-1 Ops Spec A101-1Ops Spec A449Ops Spec A449-2EASA ApprovalEASA Renewal LetterEASA CertificateANAC Landing Gear ANAC SummitANAC CertificateRepublic of IndonesiaOps Spec DAC Form 145-3Ops Spec Class RatingOps Spec DGCA Specialized ServicesISO 9001:2008 CertificateAS9110 CertificateLAO Airlines CertificateThailand CertificateLufthansa Technik Philippines Certificate2013-03-06 Lion Air Quality Assurance.pdfCertificate of ApprovalApproval LetterFAA Dimond AwardFAA AMT Program2018-9-05 Summit Aerospace Op Specs.pdfAir Agency CertificateOps Spec Part AOps Spec A001-1Ops Spec A001-2Ops Spec A002-1Ops Spec A002-1Ops Spec A002-2Ops Spec A002-3Ops Spec A003-1Ops Spec A003-2Ops Spec A004-1Ops Spec A004-2Ops Spec A007-2Ops Spec A007-1Ops Spec A00-2Ops Spec A025-1 Ops Spec A101-1Ops Spec A449Ops Spec A449-2EASA ApprovalEASA Renewal LetterEASA CertificateANAC Landing Gear ANAC SummitANAC CertificateRepublic of IndonesiaOps Spec DAC Form 145-3Ops Spec Class RatingOps Spec DGCA Specialized ServicesISO 9001:2008 CertificateAS9110 CertificateLAO Airlines CertificateThailand CertificateLufthansa Technik Philippines Certificate2013-03-06 Lion Air Quality Assurance.pdfCertificate of ApprovalApproval LetterFAA Dimond AwardFAA AMT Program
Summit Aerospace Op Specs.2019-03-11.pdfAir Agency CertificateOps Spec Part AOps Spec A001-1Ops Spec A001-2Ops Spec A002-1Ops Spec A002-1Ops Spec A002-2Ops Spec A002-3Ops Spec A003-1Ops Spec A003-2Ops Spec A004-1Ops Spec A004-2Ops Spec A007-2Ops Spec A007-1Ops Spec A00-2Ops Spec A025-1 Ops Spec A101-1Ops Spec A449Ops Spec A449-2EASA ApprovalEASA Renewal LetterEASA CertificateANAC Landing Gear ANAC SummitANAC CertificateRepublic of IndonesiaOps Spec DAC Form 145-3Ops Spec Class RatingOps Spec DGCA Specialized ServicesISO 9001:2008 CertificateAS9110 CertificateLAO Airlines CertificateThailand CertificateLufthansa Technik Philippines Certificate2013-03-06 Lion Air Quality Assurance.pdfCertificate of ApprovalApproval LetterFAA Dimond AwardFAA AMT Program2018-9-05 Summit Aerospace Op Specs.pdfAir Agency CertificateOps Spec Part AOps Spec A001-1Ops Spec A001-2Ops Spec A002-1Ops Spec A002-1Ops Spec A002-2Ops Spec A002-3Ops Spec A003-1Ops Spec A003-2Ops Spec A004-1Ops Spec A004-2Ops Spec A007-2Ops Spec A007-1Ops Spec A00-2Ops Spec A025-1 Ops Spec A101-1Ops Spec A449Ops Spec A449-2EASA ApprovalEASA Renewal LetterEASA CertificateANAC Landing Gear ANAC SummitANAC CertificateRepublic of IndonesiaOps Spec DAC Form 145-3Ops Spec Class RatingOps Spec DGCA Specialized ServicesISO 9001:2008 CertificateAS9110 CertificateLAO Airlines CertificateThailand CertificateLufthansa Technik Philippines Certificate2013-03-06 Lion Air Quality Assurance.pdfCertificate of ApprovalApproval LetterFAA Dimond AwardFAA AMT Program