summer 2015 arms & adapters catalog
TRANSCRIPT
SUMMER 2015
ARMS & ADAPTERS CATALOG
Beneath the Surface
632 west Palm Ave.
Redlands, CA. 92393
909-633-2887
www.beneaththesurface1.com
BtS Ball-Jointed Arm and Clamp Systems At Beneath the Surface (BtS) our design team philosophy is simple. Create the best functioning product, make it
out of the finest materials available and then test it repeatedly in the environment continually refining it to ensure
that it stands up to the rigors of the underwater realm. Our stainless steel ball-jointed arm sets, with their aluminum
alloy clamps do just that. BtS arms and clamps outperform all others and are the best arm set value on the market
today.
Arm Features and Benefits: Streamlined/Low Drag - Tubular stainless steel design allows them to have the smallest surface area of any arm.
Lightweight - BtS arms are lightweight due to their smaller profile and hollow core. They are perfect for the traveling
diver.
High strength - Manufactured of 304 stainless steel tubing, BtS ball-jointed arms are much stronger and more dura
ble than aluminum alloy arms. The hard anodized, 6061 aluminum ball ends are pressed on at 5000 psi, then the ends
are sealed with stainless steel cap screws.
EPDM O-rings - We use the toughest rubber o-rings available. Ethylene propylene diene monomer (EPDM) M-class,
rubber O- rings. They withstand the shear forces and friction between ball end and clamp better than any other.
Arm Clamps – BtS arm clamps offer stronger hold and better arm retention because of their specially beveled
cut, which increases the contact area between ball and clamp. They do not require extreme clamp tension like
some arms to maintain arm position. Finger tight is all you’ll need.
Easy to Maintain – The same as your dive gear, just rinse and soak in fresh water after use.
Limited Lifetime Warranty We stand behind our products at BtS with a limited lifetime warranty to the original
purchaser.
Made in USA - We can proudly say that all of our products are 100% made and assembled here in the USA.
3”
5”
8”
10”
5”
DOUBLE BALL ARMS
SINGLE BALL ARMS
Part # MSRP
DBA-3 29.95
DBA-5 39.95
DBA-8 44.95
DBA-10 44.95
Part # MSRP
SBA-5-YS 47.95
SBA-8-YS 50.95
***NEW for 2015*** BLACK NON REFLECTIVE BtS ARMS
These arms arm machined from 6061 solid aluminum round
bar, they are then assemble the same as our stainless steel arms.
These arms are even lighter than are stainless arms by more
than a 1/2 ounce and will not reflect light underwater.
DBA-5-BLK MSRP $39.95
DBA-8-BLK MSRP $44.95
**Same great price just all black!!**
BtS *Buoyancy* Float System Our float system is easy to install, adjustable to suit personal needs, lightweight. Each 2.5" BtS or Ultralight float segment yields up to 4 oz. of positive buoyancy per float in fresh water, so even the heaviest underwater camera system will be "lightened up" substantially. Our floats are manufactured from a new high-tech, high density foam and have been thoroughly tested to well beyond sport diving depths.
#BF-1 1 single float for BtS arms MSRP $15.95 #BF-5 5 piece float set for BtS Arms MSRP $49.95 #BF-7 7 piece float set for BtS Arms MSRP $59.95 #BF-1-ultra 1 single float for Ultralight arms MSRP $15.95 #BF-5-ultra 5 piece float set for Ultralight Arms MSRP $59.95 #BF-7-ultra 7 piece float set for Ultralight Arms MSRP $69.95
Now
available
For
*Ultralight* Arms
**Tested**
**To 160 Feet** (No water retention dries in minutes!!!)
BtS BALL CLAMPS
#ACS
#ACB
#ACT
Part # MSRP
ACS 29.95
ACB 32.95
ACT 34.95
ACS-LONG 39.95
#ACS-LONG
NEW long arm clamp
(#ACS-LONG) Shown
here with (#CSBM) and
big blue video light
The strongest clamps
on the market today!
BtS Flex Arm Systems
Beneath the Surface flex arms are the premium flex arm on the market today. We offer more important features
and options than any other manufacturer. With over 60 different models available, BtS has the flex arm solution for
everyone. BtS flex arms are designed to fit the most popular strobes and LED lights available. We have models
that will accept lights from Big Blue, Light & Motion (Sola), Underwater Kinetics (Aqualite) as well as any
round shaped lights in our Universal mount. We also offer either a double ball ended flex arm that can be used
with any 1” arm clamps, or a single ball ended flex arm with a YS type light mount adapter for Sea and Sea
strobes.
Arm Features and Benefits: Flexibility - Our uniquely designed flex arms allow countless positioning of your strobe, or light very, even while
shooting. This gives you the widest variety of possible lighting angles and positions for creative effect.
Safety Cable – All BtS flex arms come with a built-in 1/16" vinyl coated stainless steel safety cable that runs
through the entire arm ensuring that you will never lose your valuable lighting equipment even if you accidentally
disconnect the arm.
Quick Disconnect - Is available on most of our flex arm models. This feature makes it fast and easy to break your
system down, or to change lighting arrangement either in or out of the water. Ends - All of our flex arm ends and light mounts are machined out of solid Delrin bar stock to maintain our high
quality standards.
Easy to Maintain – The same as your dive gear, just rinse and soak in fresh water after use.
Lightweight - BtS flex arms are the lightest available. They are perfect for traveling divers!
Limited Lifetime Warranty - We stand behind our products at BtS with a limited lifetime warranty to the original
purchaser.
Made in USA - We can proudly say that all of our products are 100% made and assembled here in the USA.
*** We Have added NEW arms this Year***
Part # Length Arm Di-
ameter Head Type Base Type MSRP
FA-3-UNI-CSM 3" 1/2" UNIVERSAL COLD SHOE MOUNT 60.00
FA-4-SOLA-NB1.0 4" 1/2" SOLA (NEW) 1/4", 5/16", 8mm 49.95
FA-4-YS-NB 4" 1/2" YS 1/4", 5/16", 8mm 39.95
FA-4-BIGB-NB 4" 1/2" BIG BLUE 1/4", 5/16", 8mm 49.95
FA-4-AL-NB 4" 1/2" (UK) AQUALITE 1/4", 5/16", 8mm 39.95
FA-4-UNI-NB 4" 1/2" UNIVERSAL 1/4", 5/16", 8mm 59.95
FA-4-SOLA-CSM1.0 4" 1/2" SOLA (NEW) COLD SHOE MOUNT 79.95
FA-4-GP-QD 4" 1/2" SOLA QUICK DISCONNECT 69.95
FA-6-SOLA-NB1.0 6" 1/2" SOLA (NEW) 1/4", 5/16", 8mm 49.95
FA-6-SOLA-CSM1.0 6" 1/2" SOLA COLD SHOE MOUNT 69.95
FA-6-SOLA-QD1.0 6" 1/2" SOLA (NEW) QUICK DISCONNECT 79.95
FA-6-GP-QD 6" 1/2" GOPRO QUICK DISCONNECT 69.95
FA-6-GP-CSM 6" 1/2" GOPRO COLD SHOE MOUNT 59.95
FA-6-YS-CSM 6" 1/2" YS COLD SHOE MOUNT 59.95
FA-6-YS-IKE-NB-75 6" 3/4" YS 1/4", 5/16", 8mm 39.95
FA-6-SOLA-NB-NAU 6" 1/2" SOLA 1/4" W/NAU ADPT 79.95
FA-6-YS-NB-75-NAU 6" 3/4" YS 1/4" W/NAU ADPT 69.95
NOTE: (BIGB) arms fit the following models of Big Blue lights only, VL5800P, VTL5000P, VL15000PM,
VL25000P, AL1800WP, VTL2800P, VL2500P
FA-6-YS-NB 6" 1/2" YS 1/4", 5/16", 8mm 39.95 FA-6-YS-CSM.75 6" 3/4" YS COLD SHOE MOUNT 59.95
FA-6-BIGB-CSM 6" 1/2" BIG BLUE COLD SHOE MOUNT 69.95
FA-6-AL-CSM 6" 1/2" (UK) AQUALITE COLD SHOE MOUNT 59.95
FA-6-UNI-CSM 6" 1/2" UNIVERSAL COLD SHOE MOUNT 79.95
FA-8-DBA-50 8" 1/2" BMA 1" BALL & JOINT 49.95 FA-8-GP-CSM 8" 1/2" GOPRO COLD SHOE MOUNT 59.95
FA-10-SOLA-QD1.0 10" 1/2" SOLA (NEW) QUICK DISCONNECT 69.95 FA-10-SOLA-NB1.0 10" 1/2" SOLA (NEW) 1/4", 5/16", 8mm 49.95
FA-10-YS-NB 10" 1/2" YS 1/4", 5/16", 8mm 39.95
FA-10-BIGB-NB 10" 1/2" BIG BLUE 1/4", 5/16", 8mm 49.95
FA-10-CSM 10" 3/4" YS COLD SHOE MOUNT 59.95
FA-10-UNI-CSM 10" 1/2" UNIVERSAL COLD SHOE MOUNT 59.95
FA-12-SOLA-QD1.0 12" 1/2" SOLA (NEW) QUICK DISCONNECT 79.95 FA-12-AL-QD 12" 1/2" (UK) AQUALITE QUICK DISCONNECT 69.95
FA-12-AL-BMA 12" 1/2" (UK) AQUALITE 1" BALL& JOINT 59.95 FA-12-AL-CSM 12" 1/2" (UK) AQUALITE COLD SHOE MOUNT 69.95
FA-12-UNI-QD 12" 1/2" UNIVERSAL QUICK DISCONNECT 79.95 FA-12-SOLA-NB1.0 12" 1/2" SOLA (NEW) 1/4", 5/16", 8mm 59.95
FA-12-YS-NB 12" 1/2" YS 1/4", 5/16", 8mm 49.95
FA-12-YS-QD 12" 1/2" YS QUICK DISCONNECT 69.95 FA-12-BIGB-NB 12" 1/2" BIG BLUE 1/4", 5/16", 8mm 59.95
FA-12-SOLA-CSM1.0 12" 1/2" SOLA (NEW) COLD SHOE MOUNT 69.95
FA-12-SOLA-IKEQD1.0 12" 1/2" SOLA (NEW) IKELITE QUICK DISCON-
NECT
69.95
FA-12-BIGB-QD 12" 1/2" BIGBLUE QUICK DISCONNECT 69.95 FA-12-DBA-50 12" 1/2" BMA 1" BALL & JOINT 59.95
FA-14-SOLA-BMA 14" 3/4" SOLA (NEW) 1" BALL & JOINT 69.95 FA-14 14" 3/4" YS BtS BASE 49.95
FA-14-NB 14" 3/4" YS 1/4", 5/16", 8mm 39.95 FA-14-DBA-75 14" 3/4" BMA 1" BALL & JOINT 59.95
FA-14- SEALIFE 14" 3/4" SEALIFE 12-24 BtS BASE 59.95
FA-14- SEALIFE-VIDEO 14" 3/4" SEALIFE 1/4" BtS BASE 59.95 FA-14-SEALIFE-VIDEO 14" 3/4" SEALIFE 1/4", 5/16", 8mm 59.95
FA-14-DSLR 14" 3/4 YS FOR DSLR HANDLES 59.95 FA-14-QD 14" 3/4" YS QUICK DISCONNECT 69.95
FA-14-BMA 14" 3/4" YS 1" BALL & JOINT 59.95
FA-14-YS-IKEQD 14" 3/4" YS IKELITE QUICK DISCON-
NECT
69.95
FA-16-DBA-50 16" 1/2" BMA 1" BALL & JOINT 69.95
FA-16-SOLA-QD1.0 16" 1/2" SOLA (NEW) QUICK DISCONNECT 79.95 FA-16-SOLA-NB1.0 16" 1/2" SOLA (NEW) 1/4", 5/16", 8mm 49.95
FA-16-YS-NB 16' 1/2" YS 1/4", 5/16", 8mm 49.95
FA-16-YS-QD 16' 1/2" YS QUICK DISCONNECT 69.95 FA-16-BIGB-NB 16" 1/2" BIG BLUE 1/4", 5/16", 8mm 59.95
FA-16-AL-NB 16' 1/2" (UK) AQUALITE 1/4", 5/16", 8mm 49.95 FA-16-AL 16' 1/2" (UK) AQUALITE BtS BASE 59.95
FA-16-GP-NB 16' 1/2" GOPRO 1/4", 5/16", 8mm 59.95
FA-18-DBA-75 18" 3/4" BMA 1" BALL & JOINT 69.95 FA-21 21" 3/4" YS BtS BASE 59.95
FA-21-NB 21" 3/4" YS 1/4", 5/16", 8mm 59.95 FA-21-QD 21" 3/4" YS QUICK DISCONNECT 79.95
FA-21-BMA 21" 3/4" YS 1" BALL & JOINT 69.95 FA-22-DBA-75 22" 3/4" BMA 1" BALL & JOINT 79.95
BIG BLUE:
To mount a Big Blue light on a BtS arm: (1) Remove the ball mount from the light. (2) Using the hardware and wrench provided, attach the
light to the arm with the 4mm x 16mm cap screw with the lock washer and the flat washer. *NOTE: Add a small amount of Blue Loctite #242
to the thread before security before installing screw.
SOLA:
To mount the Light&Motion SOLA light on a BtS arms, remove any factory mount from the light, and slide the light onto the BtS arm using
the 10-32 x 1/4" screw provided. *NOTE: Add a small amount of Blue Loctite #242 to the thread for security
UNIVERSAL:
Our Universal light mount (UNI) will fit any round light that is 3/4" to 1 1/4" in diameter.
AQUALITE:
Our Aqualite arms come with the attachment hardware needed to connect the light to the BtS arm.
YS:
Our YS arms come ready to attach any YS compatible light no additional parts are needed.
***New for 2015 Flex Arm Floats***
*Buoyancy* For
1/2”
and
3/4”
loc-line
Flex Arms
1/23/4”
**TESTED TO 160 FEET** Our float system is easy to install, adjustable to suit personal needs, lightweight. Each of the .50” Loc-line arm floats will give you 2.75 oz. of positive buoyancy per float in fresh water, the .75” Loc-line float will give you 2.25 oz. of positive buoyancy per float in fresh water, so even the heaviest underwater camera system will be "lightened up" substantially. Our floats are manufactured from a new high-tech, high density foam and have been thoroughly tested to well beyond sport diving depths.
#BF-FLEX.50-1 1 piece float for ½” locline arms MSRP $15.95 #BF-FLEX.75-7 7 piece float set for ¾” locline arms MSRP $59.95 #BF-FLEX.50-1 1 piece float for ½” locline arms MSRP $15.95 #BF-FLEX.75-7 7 piece float set for ¾” locline arms MSRP $59.95
ADAPTERS All of our BtS adapters are machined from the highest quality materials 6061 aluminum and Delrin. All aluminum
adapter parts are hard anodized for low maintenance, hardware is 18-8 stainless steel , we use EPDM (ethylene
propylene diene monomer (M-class) rubber) O-rings on everything we build they will far outlast any standard rub-
ber
Part # MSRP
BMA 21.95
BMA-1420 21.95
BMBA 25.00
ISA 22.95
IKEBM 29.95
IKESA 29.95
UKLA/BM 28.95
CSBM 39.95
FLM/BMA 39.95
NAUTICAM BUSHINGS 13.95
SSOSA 22.95
SSOSAL 25.95
ALYSA 22.95
IFASA 26.95
Nauticam Bushing
Converts the 10mm metric
thread on top of the Nuaticam
housings to 1/4-20 for use of
many standard adapter. #BMA #BMA-1420
#IKEBM
This ball mount work
for factory Ikelite quick
disconnect handles.
#FLM?BMA
For UK Super-Q and other
1” diameter lights
#IFASA
This converts a Inon
strobe to YS
#CSBM
Cold Shoe Ball
Mount
#IKESA
Ikelite Strobe Adapter
#UKLA/BM
Underwater Kinetics Light
Canon type lights.
#ISA
Inon Strobe Adapter
#BMBA
This is for factory
DSLR handles
#SSOSAL
Long YS Strobe Adapter
#SSOSA
YS Strobe Adapter
#ALYSA
This converts a UK
Aqualite to YS
Limited Lifetime Warranty
Warranty Beneath the Surface warrants this underwater camera tray or accessory components to be free from defects in material and
workmanship for the life of the product to the original purchaser with proof of purchase. If you discover a defect in a product
covered by this warranty, we will at our option replace the entire tray system or just the defective component.
Exclusions This warranty covers defects in manufacturing discovered while using the product as intended by BtS. The warranty does not
cover loss of theft, nor does coverage extend to damage caused by misuse, abuse, unauthorized modifications, improper storage
conditions, corrosion of striped threads. This warranty does not cover parts that are subject to normal wear and tear replacement
requirement, such as O rings and nylon webbing.
Limits of Liability Should the product(s) fail your sole recourse in replacement, as described in the preceding paragraphs. We will not be held
liable to you or any other party for any damages that result from the failure of this product. Damages excluded include, but not
limited to, lost profits, lost equipment, damages to other equipment, and incidental or consequential damages arising from the
use, or inability to use this product. In no event will Beneath the Surface be held liable for more than the amount of your pur-
chase price, not to exceed the current list price of the product and excluding tax, shipping and handling charges.
Disclaimer Beneath the Surface disclaims any other warranties, express or implied. By using this product, the user accepts the terms de-
scribed herein.
How to obtain service under this warranty
Contact us using the following methods.
By telephone (909)633-2887. 8am to 5pm PST
By email warranty @beneath the surface1.com
Requirements
Return shipping cost to be paid for by the buyer of the product. Replacement shipping will be paid for by Beneath the Surface.
WARNING Do not over tighten screws or bolts. Striped threads are not covered under manufacturer warranty. Please see torque specs
below.
Spec. for 18-8 Stainless Steel
10-32 (23.0 in-lbf ) (2.6 nm.)
1/4-20 (75.0 in-lbf ) (8.5 nm.)
5/16-18 (140.0 in-lbf) (16.0 nm.)
Corrosion
Manufacturer does not warranty product to be corrosion proof. The aluminum used in the manufacturing of these products are
finish in a type 3 hard anodized finish which by its self will protect the aluminum parts from corrosion, but whenever you intro-
duce a unlike metal to one another you will get a reaction in salt water. (I.E.) BtS tray components are connected with stainless
steel hardware, both the tray and the screws are corrosion resistant by themselves but when you put them together in salt water
you get a reaction, so the following is required to keep your tray free from corrosion and working great for years to come.
#1 Apply a small amount of silicone grease to threads of screw every time they are assembled. (DO NOT OVER TIGHTEN
ANY FASTENER).
#2 After use completely disassemble tray and soak in hot soapy water to help remove salt crystals and rinse thoroughly, let all
parts dry before storage.
#3 Some parts you cannot disassemble (I.E.) arms and strobe adapters. These parts with get a buildup of a white powdery cor-
rosion around where the stainless steel rod is pressed into the aluminum ball or adapter this is NORMAL. Follow the same pro-
cedure as stated above except use a soft tooth brush to scrub around connection point rinsing with warm water in between
scrubbing.
#4 All stainless steel hardware can be brushed free of any white corrosion with a small brass or stainless steel brush available at
most hardware stores.
#5 O rings will last for years with good maintenance and storage techniques if however you need a replacement they are avail-
able from Beneath the Surface in bags of 10 please call to order in an emergency you could use a size #209 O ring available at
any hardware store.
#6 Nylon webbing soak and rinse well after every use let dry completely before storage. Inspect for abrasions and ware after
every use.
#7 Delrin components rinse in warm water and let completely dry before storage. Delrin is in the plastic family there is no need
to apply silicone grease to screw threads as it has no corrosion issues.
#8 Clamps remove the “T” handle by unscrewing it from the bolt being careful not to lose the nylon washer or the spring use
your ss brush to clean the treads of the bolt then apply a small amount of silicone grease and reassemble. Do this after every use
and this clamp will last a lifetime.