sublimate - escosublimate ® 4 sublimate®, a world-class laboratory freeze dryer, engineered to be...
TRANSCRIPT
SubliMate®SubliMate® Benchtop Laboratory Freeze Dryer Model FDL-5__
Benchtop Laboratory Freeze Dryers
Benchtop Laboratory Freeze Dryers
SubliMate®
22
Vacuum Port NW16 and SocketVacuum port connects to the vacuum pump
Power socket for the power supply cable
SmarTouchTM Large Touchscreen Control TechnologyUser-friendly interface with touchscreen controller offering a simple range of submenus for freeze drying, defrosting, language selection, pressure, temperature units, data-logging files, and a real-time clock
Clear, bright LCD display placed on a raised lip and seal for protection against drips due to condensation from flasks on drying manifolds
Equipped with pre-freezing function which allows samples to be frozen before freeze drying
Powder CoatEasy to clean external surface coated with IsocideTM to eliminate 99.9% of surface bacteria within 24 hours of exposure
Large Cooling Compressor½ HP cooling compressor with a conventional refrigeration system for optimum cooling
Guarantees sufficient cooling capacity to maintain the low temperatures needed, even under heavy loads when large sample numbers are dried
Low power consumption
CFC-free and HCFC-free refrigerant used to meet demands of global market requirements
33
LusterClearTM fully flushed and clean ice condenser surface design
One-piece stainless steel ice condenser with smooth walls
Protects the cooling coils from damage during ice core removal
Designed for rapid trapping of vapour for better mass transport and vapour flow within the system
Improves freeze drying process time
Delivers fast, efficient and reproducible freeze drying performance
IceOutTM Active Defrost SystemSimple active-heat defrost system to ensure a quick and simple ice core removal at the end of the cycle, allowing for back-to-back drying cycles
Built-in drain valve allows for simple draining
Vacuum Break ValvePrevents oil backstreaming from entering the system when either the vacuum pump or the freeze dryer is shut down
Drain Release ValveDesigned for easier removal of unwanted and excess water from defrosting
Benchtop Laboratory Freeze Dryers
SubliMate®
44
SubliMate®, a world-class laboratory freeze dryer, engineered to be perfect for your laboratory needs. Models were designed to reach low condensation temperatures of -55°C for removing aqueous solutions, and up to -90°C for eliminating organic solvents from your precious samples.
Control System
The SmarTouchTM Large Touchscreen is a user-friendly interface where primary buttons for pre-freezing, freeze drying, and defrosting are conveniently located on one side. It also features clear readouts of both temperature and pressure for process guidance and sample security.
Features:Designed to provide all necessary information about the equipment at a glance.
Instrument-grade precision platinum temperature probes and pressure sensors are finely tuned and tested to ensure the most reliable readout and longest operating lifespan possible. Minimum pressure can reach 0.001 mBar.
Efficient refrigeration system and tuned control ensure fast cooling time and stable temperatures once the set point is achieved.
Equipped with warning message and mutable alarm to remind users not to open vacuum line before correct temperature and pressure are reached.
Diagnostic functions provide condenser’s historical data to simplify equipment service.
Password protection can be set up to restrict access from unauthorized users.
Easy settings allow user to choose unit of temperature (°C or °F), unit of pressure (mBar or Pascal), change date and time, and enable/set ring-back timer.
Available menu languages include English, German, Italian, Spanish, and French.
Typical applications for Esco SubliMate®:
Preservation of biological agents such as bacteria and viruses
Preservation of tissue samples
Protein purification
Concentration for chemical products
Displays current screen name
Displays the current temperature of the condenser
Pre-freezing button runs pre-freezing process to freeze samples before freeze drying
Displays the current pressure of the vacuum
Freeze dry button begins freeze drying process
Displays the calculated temperature of the product
Graph button views the history of condenser temperature and vacuum pressure at a certain period of time
Displays the status of the compressor
Defrost button begins defrosting cycle
Displays current date and time
Home button:
To return to the home screen
Menu button:
Access the menu screen to change settings, password protection, and data log
Diagnostic button:
Access the Diagnostic Read Screen and the Event Log Screen
Help button:
Displays the explanation of the buttons found on the interface
Mute button:
Enable / Disable alarm sound
55
MoDEL CoDE DESCripTion
FDL-2S8(130001)
SubliMate® 2 Benchtop Laboratory Freeze Dryers, 2 Kg, -55°C, 220-230 VAC, 50/60 Hz
FDL-5S8(130002)
SubliMate® 5 Benchtop Laboratory Freeze Dryers, 5 Kg, -55°C, 220-230 VAC, 50/60 Hz
FDL-5L8(130003)
SubliMate® 5LT Benchtop Laboratory Freeze Dryers, 5 Kg, -90°C, 220-230 VAC, 50/60 Hz
FDL-2S9(130004)
SubliMate® 2 Benchtop Laboratory Freeze Dryers, 2 Kg, -55°C, 115 VAC, 50/60 Hz
FDL-5S9(130005)
SubliMate® 5 Benchtop Laboratory Freeze Dryers, 5 Kg, -55°C, 115 VAC, 50/60 Hz
FDL-5L9(130006)
SubliMate® 5LT Benchtop Laboratory Freeze Dryers, 5 Kg, -90°C, 115 VAC, 50/60 Hz
orDEring inForMaTion
1. Acrylic Jar with plain Flat Cover2. SmarTouchTM Touchscreen Control System3. Gasket for sealing Chamber4. Body5. Vacuum Break Valve6. Drain Release Valve7. Base Foot8. Power Switch9. Vacuum Port NW1610. Socket for Power Supply Cable
330
mm
(13.
0")
790
mm
(31.
1")
470 mm (18.5")
460
mm
(18.
1")
400 mm (15.7")
ø 270 mm (10.6”)
4
3
5
6
7 10
9
8
2
1
SubliMate® Benchtop Laboratory Freeze Dryer Model FDL-5__
Benchtop Laboratory Freeze Dryers
SubliMate®
66
Note: Performance specifications (-55°C) are based on units operating under optimum conditions.
TECHniCaL SpECiFiCaTionS
Model Code
230 VaC, 50/60 HzFDL-2S8(130001)
FDL-5S8(130002)
FDL-5L8(130003)
115 VaC, 50/60 HzFDL-2S9(130004)
FDL-5S9(130005)
FDL-5L9(130006)
External Dimensions (W x D x H) 400 x 500 x 395 mm(15.7” x 19.7” x 15.6”)
400 x 500 x 475 mm(15.7” x 19.7” x 18.7”)
400 x 500 x 475 mm(15.7” x 19.7” x 18.7”)
Ultimate Condenser Temperature -55°C -90°C
ice Capacity(24 hrs / Maximum Condenser Capacity)
2 Kg / 2 Kg(4.4 lbs / 4.4 lbs)
2.5 Kg / 5 Kg(4.4 lbs / 11.0 lbs)
Condenser Volume 3.5 L 7 L
Condenser area 0.1 m2
(1.1 ft2)0.15 m2
(1.6 ft2)
pressure Measurement range 0.001 - 100 mBar
Condenser Chamber Material AISI 304 mirror polished Stainless Steel
Display 5.7” touchscreen
Cooling Media CFC-free
Maximum power Consumption 330 W 630 W
net Weight 36 Kg(79.4 lbs)
40 Kg(88.2 lbs)
Shipping Weight 41 Kg(90.4 lbs)
46 Kg(101.4 lbs)
Shipping Dimensions (W x D x H) 495 x 573 x 395 mm(19.5” x 22.6” x 15.6”)
495 x 573 x 543 mm(19.5” x 22.6” x 21.4”)
77
accessories and options
Vacuum
Vacuum Pump, 115 VAC, 60 HzVP-115
1370022
Vacuum Pump, 220 VAC, 50/60 HzVP-220
1370029
Vacuum Pump Oil Mist FilterVF-1
1370030
High Vacuum Grease, 150 g/tubeVVG-1501370028
Manual Vacuum Stop ValveVSV-1
1370031
Vacuum Hose 1.5 m, including standard flange NW/KF 16 both sides and NW25 adapter for vacuum pump
VVH-11370032
Vacuum Pump Oil 1 LVVO-1
1370033
Spare Pirani Vacuum Gauge (pressure sensor)VPS-1
1370034
Chambers and Shelf Systems
Acrylic Jar with plain flat coverCSS-AJ
1370025
Shelf System with 4 traysCSS-SS4T1370026
Mini Shelf System (for pre-freezing)CSS-MSS1370035
Stoppering System, with 4 traysCSS-STS41370016
Heated Shelf System, with 2 traysCSS-HSS21370017
Acrylic Basic Cylinder, without coverCSS-ABC1370018
Acrylic Cover with 8 Valves (normal design)CSS-AC81370007
Stand Stand with Wheels and BrakesSTAND
1370027
Manifold, Valves, and adaptors
Basic Bottom to hold ManifoldMVA-BM1370009
4 Valves ManifoldMVA-4VM1370010
4 Valves ExtensionMVA-4VE1370011
Spare Valve for Flask Freeze Drying (normal design)MVA-SVF1370008
Adaptor1 for Socket size 34/35 flaskMVA-AD11370012
Adaptor2 for Socket size 29/32 flaskMVA-AD21370013
Adaptor3 for Socket size 24/29 flaskMVA-AD31370014
ampoule / Tube Connector
16 Tube ConnectionAMP-161370015
VP-_
STAND
MVA-SVFMVA-4VE AMP-16
VVO-1 CSS-ABC
VF-1
MVA-BM
VSV-1
MVA-AD_
VPS-1
VVG-150
VVH-1
CSS-SS4T
9010
180_
Subl
imat
e_Fr
eeze
_Dry
er_B
roch
ure_
A4_
vB_0
3/11
/201
5Es
co c
an a
ccep
t no
resp
onsib
ility
for p
ossib
le e
rror
s in
cata
logu
es, b
roch
ures
and
oth
er p
rint
ed m
ater
ials.
Esc
o re
serv
es th
e ri
ght
to a
lter i
ts p
rodu
cts a
nd sp
ecifi
catio
ns w
ithou
t not
ice.
All
trad
emar
ks an
d lo
goty
pes i
n th
is m
ater
ial a
re th
e pro
pert
y of
Esc
o an
d th
e re
spec
tive c
ompa
nies
.
Life Science • Chemical Research • Assisted Reproductive Technology (ART) • Pharmaceutical Equipment • General Equipment
The Esco Group of Companies is a global life sciences tools provider with sales in over 100 countries. The group is active in lab equipment, pharma equipment and medical devices. Manufacturing facilities are located in Asia and Europe. R&D is conducted worldwide spanning the US, Europe and Asia. Sales, service and marketing subsidiaries are located in 12 major markets including the US, UK, Singapore, Japan, China and India. Regional distribution centers are located in the US, UK, and Singapore.
ESCO GLOBAL NETWORk
ART EquipmentBiological Safety CabinetsCO2 IncubatorsCold StorageCompounding Pharmacy EquipmentContainment / Pharma ProductsDuctless Fume HoodsLab Animal Research ProductsLaboratory Fume HoodsLaboratory IncubatorsLaboratory OvensLaminar Flow CabinetsLaboratory Freeze DryersPCR CabinetsPCR Thermal CyclersPowder Weighing Balance Enclosures
Esco Technologies, Inc. • 903 Sheehy Drive, Suite F, Horsham, PA 19044, USAToll-Free USA and Canada 1-877-479-3726 • Tel 215-441-9661 • Fax [email protected] • www.escolifesciences.us
Esco Micro Pte. Ltd. • 21 Changi South Street 1 • Singapore 486 777Tel +65 6542 0833 • Fax +65 6542 6920 • [email protected]
Esco Global Offices: Sydney, Australia | Manama, Bahrain | Beijing, China | Chengdu, China | Guangzhou, ChinaShanghai, China | Kowloon, Hong Kong | Bangalore, India | Delhi, India | Mumbai, India | Jakarta, Indonesia | Rome, ItalyOsaka, Japan | Kuala Lumpur, Malaysia | Melaka, Malaysia | Manila, Philippines | Singapore | Midrand, South Africa Seoul, South Korea | Bangkok, Thailand | South Yorkshire, United Kingdom | Philadelphia, PA, USA | Hanoi, Vietnam
PT Esco Bintan IndonesiaCert. No: 651333/E
Esco Micro Pte Ltd Cert. No: 651076
PT Esco Bintan IndonesiaCert. No: Q2N130383797001