STROMBERG CARLSONPRODUCTS INC.

2 3

Manual RV StepsRailingsPROUDLY MADE IN THE USA

Lend A Hand

AM-200 White FinishAM-300 Silver Sparkle Finish AM-800 Black FinishFP-1002-R Replacement WrapAM-250 White Finish (Mini)AM-255 Black Finish (Mini)

AZ-320EZ Open Hand Rail White

AZ-325EZ Open hand Rail Black

EZ Open Handle

Soft Touch

An aluminum assist railing that folds in either direction without tools.

Comes fully assembled. Made in the USA.

It’s nice to grab a handle instead of a strap. With the soft touch molded finger grip handle, stepping into your RV is a pleasure. Made in the USA.

Don’t back down; open your RV door safely from any step.

l32” tall handlelAluminum and nylon parts

never rustlWorks on all paddle handleslPermanently attaches to your

RV doorlMade in the USA

Mini

New adjustable bracket

AP-101 Rail Mate

l Lightweight and easy to install

l Handle measures approximately 38”

l Rail extends approximately 25” from the coach

l Designed for most double, triple and quad entry manual steps

l Made in the USA

Rail MateThe new Rail Mate is specifically designed to give the most support where it’s needed: safely entering and exiting your RV. Manufactured for comfort and ease of use, the Rail Mate is removable, stores during travel and sets up in just minutes.

AH-100 Assist Handle WhiteAH-150 Assist Handle Black

Hickory Springs Aluminum Steps

Hickory Springs Steps

New non-rusting aluminum tread with non-slip safety grit tape saves weight and dresses up any entrance. Made in the USA.

Hickory Springs Manufacturing has the largest OEM supplied step in the RV industry. Best to replace what’s already on your unit.

Quickly and easily replace your old electric or manual RV step

SM-24-10 Single, 7” RiseSM-24-20 Double, 7” Rise SM-24-30 Triple, w/ 7” RiseSM-24-39 Triple, w/ 9” RiseSM-2410-39 Triple, w/ 9” RiseSM-24-40 Quad, w/ 7 1/2” RiseSM-01 Outrigger Installation Kit (Rails, Bolts, Nuts)

SMRA-24-10 Single, 7” Rise

SMRA-24-20 Double, 7” Rise

SMRA-24-30 Triple, 7” Rise

SMRA-24-39 Triple, 9” Rise

SMRA-24-40 Quad, 7” Rise

Stabil-Step

JSS-4 Adjusts 4” to 7-3/4”JSS-7 Adjusts 8” to 13-1/2”JSS-85 Adjusts 8-1/2” to 16”

Stabilize your entry step to eliminate the sway when you enter and leave your coach. Supports up to 750 lbs.

Transportation & Specialty Manufacturing Company

M

ANUFACTURED BY HSM

DISTRIBUTED BY STROMBERG CARLSO

N

Manual Steps by Flexco PROUDLY MADE IN THE USA

PROUDLY MADE IN THE USA

These steps are used at the OEM level and will replace any step on the market. 20” single and double steps are available as well as “low profile” single steps. The sturdiest step in the marketplace. Made in the USA.

SMFP-1100 24” SingleSMFP-1120 20” SingleSMFP-1200 24” Single Low ProfileSMFP-1220 20” Single Low ProfileSMFP-2100 24” DoubleSMFP-2120 20” DoubleSMFP-3100 24” Triple 8” DropSMFP-3200L 24” Triple 9” DropSMFP-4400 24” Quad 8” Drop

4 5

Steps and StoolsFifth Wheel Landing Gear

JACKS AND ACCESSORIES

Safety first when entering and exiting your RV

l8” talll31/2” tall when foldedlPlatform size 19” x 14”lLightweight 7 lbs and store the smallestlMaximum load 1,000 lbs

lBoth steps work at two levels

lAdjusts from 4” and 8” tall

l24” x 16” platform

Best unit to clean your shoes at rustic sites

Each leg adjusts independently for un-level camp sites.

l15/8” leg adjustmentlPlatform size 19” x 14”lAdjusts from 63/8”

to 8” talllMaximum load 1,000 lbs

Our large platforms provide traction, are strong and easy to use.

S-150 Steel Platform Maximum load 300 lbs

JB-20

P-102 Plastic Platformsupported by steel railsMaximum load 500 lbs

PA-100 Aluminum Step

PA-250Adjustable Aluminum Step

Jack-In-A-Box

Electric Tongue Jack Cover

The surprise in this Jack-in-a-Box is that it stabilizes more than 10,000 lbs. Features include:

l Two jacks per cartonl New folding handle

allows jacks to store in small compartments

l Each jack stabilizes over 10,000 lbs

l U-Top fits most framesl All parts are powder-coated

or zinc-plated for corrosion resistance

JB-20 Set of two Jacks Ajusts 20” to 34”

JB-30 Set of two Jacks Adjusts 31” to 45”

This cover keeps the weather off of and out of your electric tongue jack while you are parked or traveling. Fits all electric tongue jacks.

JET-01 Electric Tongue Jack Cover

24" Scissor Jacks

30" Scissor Jacksl Keeps your RV level and stablel Expands from 5” to 30” in heightl Bowtie base sets well on soft surfacesl Holds up to 5000 lbs. per jack

JSC-30 30” Scissor Jack

l Bowtie base sits well on soft surfacesl Expands from 4” to 24” in heightl Keeps your RV level and stableJSC-12 24” Scissor Jack

Holds up to 2500 lbs per jackJSC-24 24” Scissor Jack

Holds up to 5000 lbs per jack

l 3200 lbs, at 32” l Single motor operates both legsl Automatically finds its own center

after each leg touches the groundl Both legs always have equal pressure appliedl Constructed of heavy gauge steel;

precision fabricated partsl Powder Coat Finish

JHD-32 Electric Stabilizer Jack

Electric Stabilizer Jack

Platform StepsPlatform Steps

Step Stool

JB-30

* Replacement motors and landing gear legs are compatible/interchangeable with both Venture and Lippert landing gear

LG-142178

Standard Motor, 5500 lb, 5500 rpm

LG-196308

HD Motor, 6500 lb, 5430 rpm

LG-141893

High Speed Motor, 5500 lb, 7140 rpm

LG-179013

291/2” Lead Leg, Drop Leg and Pin

LG-146059

Lead Leg Repair Kit – Venture only

LG-146060

Follow Leg Repair Kit – Venture only

LG-179015

Aluminum Gear Box

LG-145236

IP Rated Switch

LG-242728

HD Motor and IP Rated Switch

LG-217884*

Standard Motor and IP Rated Switch

LG-5

Dual Power Conversion Kit29.5” Leg 5500 lb Motor

LG-6

Dual Power Conversion Kit33.5” Leg 5500 lb Motor

LG-119225

Foot and Pin (rectangle)

LG-210475

9” Round Foot Pad

LG-XS

1”x1” and ¾” x ¾” Telescoping Tubes

LG-Brackets

Weld-on Brackets, set of 2

LG-119226

Manual Crank Handle

LG-179014

291/2” Follow Leg, Drop Leg and Pin

LG-177202

331/2” Lead Leg, Drop Leg and Pin

LG-177201

331/2” Follow Leg, Drop Leg and Pin

ELECTRIC LANDING GEARLG-129.5” Leg, 5500 lb Motor

LG-233.5” Leg, 5500 lb Motor

LG-329.5” Leg, 6500 lb Motor

LG-433.5” Leg, 6500 lb Motor

MANUAL LANDING GEARLG-18370829.5” Leg

LG-119113

Pull Pins

l15-1/2” high, 11-1/2” wide

lFirst step is 7” from the ground

lMaximum load 330 lbs

lWhen folded: 7” deep, 12” wide, 17-1/2” tall

PA-202 Step StoolBoth aluminum steps support up to 1,000 lbs

6 7

TR-1 Universal Rigid TR-2 Universal Folding

The Stromberg Carlson universal tire carrier works great on travel trailers and fifth wheel travel trailers with no welds to break. The formed column is flanged and gusseted to reduce tire vibration. The folding carrier has a built in stop so the tire won’t fall when tilted down, giving you access to rear storage.

Cargo ManagementElectric Tongue Jack

Made in the USA KV-36 36” deep Tray SlideKV-44 44” deep Tray SlideKV-48 48” deep Tray SlideKV-54 54” deep Tray Slide

CC-100 Cargo CaddyCC-125 Cargo Caddy Bike Rack (Hardware for 2 bikes included)

Trailer Tray

Bike Bunk

Tire Carriers RV Bumper Receiver

Cargo Tray SlidesCargo Caddy

Plywood and carpet not included. Width of finished slide determined by plywood.

Back to back slides cover pass through compartments.(Multiple length combinations can be used to fit any compartment.)

The first trailer tongue cargo carrying system! Adjustable to fit most “A” frame trailers on the road today. Your tow vehicle’s suspension guarantees this is the softest riding area on your trailer. Supports up to 300 lbs. Distance from top of A-frame to top of tray is approx. 305/8”, top of A-frame to bottom of tray is approx. 291/2” tray measures 32” W x 20” D (notched corners). Made in the USA.

CC-255 Trailer Tray

l Platform’s inside dimensions are 23” x 60”l Expanded metal floor drains water offl Supports 500 lbs. of cargol Powder coated to resist rust l Tie down holes are provided l Fits in a 2” receiver

l 18” travell 1 LED lightl Emergency crank through headl 2” heavy wall outer tubel Built-in level

JET-2500 Black JET-3555 WhiteJET-3755 Black

JET-5000 Black

l 18” travel, with an additional 5” drop down foot

l 2 separate LED lightsl Emergency crank through headl 23/16” heavy wall outer tubel Built-in level

l 18” travel, with an additional 5” drop down foot

l 2 separate LED lightsl Emergency crank through headl 23/16” heavy wall outer tubel Built-in level

“No Sweat”trailer hook-ups

5000 Pound Capacity 3500 Pound Capacity2500 Pound Capacity

5 inch drop down foot included

All Stromberg Carlson jacks are covered by a 2 year warranty

Our family just got stronger!Jacks With Built in Motor Protection

to Guard Your Investment

PROUDLY MADE IN THE USA

A raised receiver on the “A” frame is the perfect place to put your bikes. Our Bike Bunk allows any bike rack designed for a 2” receiver to fit. Your application will be determined by turning radius and positioning of the rack. Supports 100 lbsCC-275 Bike Bunk

Fresh Water Hose Caddy

HC-75 Hose Caddy

• 17” wide, 61/2” tall

• Holds up to 75 feet of hose

• Stores hose accessories

• Each hose end unwinds, bulkof hose remains in caddy

TO RV’S FRESH WATER INLET

TO CAMPGROUND WATER SUPPLY

BA-100RV Bumper Receiver

l Fits 4” and 41/2” square bumpersl Provides 2” receiver openingl Supports 200 lbs (always default to your

bumper rating capacity)l Cannot be used for towingl Heavy steel construction and zinc plated hardwarel Can be mounted on top or bottom of

your bumper

8 9

RV LaddersRV Ladders

LA-460 60” LadderLA-466 66” LadderLA-460B 60” Ladder BlackLA-466B 66” Ladder BlackLA-148 Starter Ladder

Universal ExteriorRV Ladder

Get a leg up on climbing your coach’s ladder to access your roof top maintenance with our 48” starter ladder. Supports up to 250 lbs maximum at12˚ angle.*

Starter Ladders Bunk LaddersOur bunk ladders provide small feet easier access to their beds or larger feet easier access to stored materials. Comes with rubber tread covers to provide comfort to bare feet. Use the small hook and extrusion for a positive attachment or the larger hook so no facia board needs to be drilled. Available in multiple lengths and colors. 250 lbs maximum at 11˚ angle.*

Can go on the rear of any RV—straight or contoured. Rugged construction keeps you safe when going up to do maintenance on the roof or just hanging your chairs on the ladder. 250 lbs maximum.*

LA-102 Ladder Bike Rack

LA-104 Ladder Chair Rack

Our bike rack attaches to your RV Ladder and is secured to ensure a “no rattle” rack. Once installed, pins can be

pulled to easily give you access up and down your ladder. Carries up to two bikes. Made from aluminum to match the no rust finish of your RV Ladder.50 lbs maximum.

Ladder Bike Rack

Our RV Ladder Chair Rack gets your style of chair to the campsite or seasonal lot. The strap and buckle secure

your chairs as you travel. This rack does not rattle, and allows traffic to the roof by simply pulling the pins and swinging the storage arms out of the way. Made from aluminum. 50 lbs maximum.

Ladder Chair Rack

LA-148

*Weight ratings are based on proper installation

LA-500 Roof Rail

l Universal roof rail adjusts to fit all RVsl Seven roof stanchions includedl Bright anodized finish

Roof Rail

90”

60”

All Stromberg Carlson ladders are constructed with 1" tubing. All racks for use with Stromberg Carlson 1" tubing ladders.

FST-9975 Nut Only 8540-CP8540-NT8540-NTB

85358535-B

8521-BK85318531-B

8525-BK

8532-CP

FST-9975 Standoff Nut only. Used in the top of bunk ladders and in standoffs. 1 per bag.8540-NT 8540-NTB (black) Replacement treads can be installed without disassembling ladder. 1 per bag.8540-CP End cap only. 1 per bag.

8535 / 8535-B (black) Aftermarket Standoff assembly. 1 per bag. (Stromberg, Top Line, Surco)8531 / 8531-B (black) OEM Standoff assembly. Shipped 12” long, trim to length. Round base. 1 per bag. (Christenson Industries, Atwood and others)8521-BK Roof Mounting Bracket for LA-401 and LA-401BA (black). 1 per bag.8525-BK Swivel Castings for LA-401 and LA-401BA (black). 1 per bag.

RV BUNK LADDER REPLACEMENT PARTS

UNIVERSAL EXTERIOR RV LADDER REPLACEMENT PARTS

REPLACEMENT PARTS FOR ALL STROMBERG LADDERS

8510-CP2460-A

2460-A Hooks for bunk ladders. Both styles in 1 bag.8532-CP Rubber Feet for Bunk Ladders. 2 per bag.8510-CP Rubber tread cover for Bunk Ladders. 1 per bag.(Hinged

feature for non-straight /contoured rear walls)

LA-401 Exterior LadderLA-401BA Extaerior Ladder, Black

10 11

Extend A Line

l Gate improves vision, reduces dragl Accessory louvers available for added privacy l 2 year limited warranty l Glass filled composite materialsl Rotary latches & cables includedl Key locks gate

onto truckl Single handed

releasel Made in the USA

Fifth Wheel Tailgates

Our composite gate is lightweight, strong as steel and has louvers that will never rust

l All steel designl Open design improves visionl Custom fittedl 100 lbs weight limit

Vented Tailgates100 Series

Louvered Tailgates4000 Series

100 Series Tailgate FitsFordVG-97-100 1999 – 2016 F-250 & F-350 Super DutyVG-04-100 2004 – 2014 F-150VG-15-100 2015 – 2016 F-150* Additional gates and fits available

GM/ChevyVGM-99-100 1999-2006 All Series (classic body style)

2007 2500 & 3500 Series (classic body style)VGM-07-100 2007 1500 Series (new body style)

2008 – 2013 All SeriesVGM-14-100 2014 – 2016 All Series (accommodates lift assist)

Dodge VGD-02-100 2002 1500 Series

2003-2008 All Series2009 1500 Series (functional fit)2009 2500 & 3500 Series

VGD-10-100 2010 – 2016 All Series

Toyota VGT-70-100 2007 – 2016 Full Size Tundra only

The Hot Stick

FP-42 The Hot Stick

l Non-conductive wooden handle stays cool to the touch and accommodates 2-handed grip

l Rust resistant stainless steel shaftl 42” long poker to maintain safe distance

from firel Hooked shaft end to maneuver

firewood and stoke embers

GR-1522 Stake & Grill

l Grill measures 15" wide x 22" longl Stake measures 36" longl Adjusts on stake to desired heatl Upturned edges keep even hot dogs

on the grilll Rotates 360˚l Chrome finish cleans easilyl Designed for many seasons of usel Nylon bag included for neat and

tidy storage

Stake & GrillFrom burgers to brats, coffee to tea; this is the way to cook when camping.

l Pivots into your shower stall when not needed

l Can be used to drip dry laundry over your shower basin

l Adds up to 30% more shower space

l Fits tubs 35” - 42”

Extend A Shower“A slide out room for your shower”

VG-97-4000 Ford Super Duty Trucks, 1999 - 2016

VG-04-4000 Ford F150 Trucks, 2004 - 2014

VG-15-4000 Ford F150 Trucks, 2015 - 2016

VGM-99-4000 GM Trucks, 1999 - 2006

VGM-07-4000 GM Trucks, 2007 - 2013

VGM-14-4000 GM Trucks, 2014 - 2016

VGD-02-4000 Dodge Trucks, 2002 - 2009

VGD-10-4000 Dodge Trucks, 2010 - 2016

VGT-70-4000 Toyota Tundra Trucks, 2007 - 2016

PROUDLY MADE IN THE USA PROUDLY MADE IN THE USA

VI-4000, Tailgate Insert

CL-100 Bumper Mounted Clothes Line

l 48” long aluminum uprightsl Can be mounted up to 7’ apartl Strong and durablel Can be removed for travel without tools

Bumper Mount Clothes Line

Extend-A-Line clothes dryer attaches to your RV Ladder in less than a minute, allowing your wet items the fresh air they need to dry.

CL-36 Extend A Line (39” usable line space)

CL-27 Extend A Line (27” usable line space)

CL-01CL-02

Patents Pending

l Six independent arms can carry towels, suits, or clothes on hangers

l Supports 10 lbs per arm, 60 lbs maximum load when evenly spaced

l Chrome plated arms and a plastic body resist rust

l Wall mounted bracket provided for home use, or for RVs without ladders

CL-01 attached on 4” sq bumpers or 2” x 6” A frame

CL-01

CL-02 allows CL-01 to be used in a 2” hitch

CL-02

Model No. CL-27 stores 40”

Model No. CL-36 stores 52”

14”

SATIN FINISH

BRONZE FINISH

WHITE FINISH

EXT-3542ORB Fits tubs 35”- 42” wide in Bronze Finish

EXT-3542 Fits tubs 35”- 42” wide in White Finish

EXT-3542S Fits tubs 35”- 42” wide in Satin Finish

New for 2017

JET-5000 5000 lb Jack

l 5000 lb capacity

l 18” travel, with an additional 5” drop down foot

l 2 separate LED lights

l Emergency crank through head

l 23/16” heavy wall outer tube

l Built-in level

l 2 year warranty

5000 Pound Capacity

BA-100 RV Bumper Receiver

RV Bumper Receiver

Step Stool

Electric Tongue Jack

Our Bumper Receiver can be used with most hitch mounted accessories - bike racks or carriers.

l Fits 4” and 41/2” square bumpersl Provides 2” receiver openingl Supports 200 lbs (always default to

your bumper rating capacity)l Heavy steel construction and zinc

plated hardwarel Cannot be used for towingl Can be mounted to the top or

bottom of your bumper

l151/2” high, 111/2” wide

lFirst step is 7” from the ground

lMaximum load 330 lbs.

lWhen folded: 7” deep x 12” wide x 171/2” tall

lAluminum constructionPA-202 Step Stool

TO RV’S FRESH WATER INLET

TO CAMPGROUND WATER SUPPLY

Fresh Water Hose Caddy

HC-75 Hose Caddy

• 17” wide, 61/2” tall

• Holds up to 75 feet of hose

• Stores hose accessories

• Each hose end unwinds, bulk of hoseremains in caddy