strip blades & accessories machine menu · komax lakes precision inc. strip blades &...

KOMAX

lAKES PRECISION iNC.

STRIP BLADES & ACCESSORIES

MACHINE MENU

< - BACK TO MAIN MENU

- KOMAX 135

- 240

- KOMAX ARA

- KOMAX 62

- BT 700

- KOMAX 40’S

- ALPHA & GAMMA

- 433S, 477& 488

- 33, 34, 35, & 36

-210, 220,230 & 235

- 30 &31

ITEM NUMBER OEM # DESCRIPTION CLASS 122356-6 BLT --------- 0.1 RADIUS TA-V122356-6 TC 030299 0.1 RADIUS TA-V122356-1 TC 033958 0.5 RADIUS TA-V122356-1 BLT 041395 0.5 RADIUS TA-V122356-3 TC 033959 0.75 RADIUS TA-V122356-3 BLT 041396 0.75 RADIUS TA-V122356-4 TC 033960 1.0 RADIUS TA-V122356-4 BLT 041397 1.0 RADIUS TA-V122356-2 TC 033961 1.5 RADIUS TA-V122356-2 BLT 041398 1.5 RADIUS TA-V122356-5 TC 033962 2.0 RADIUS TA-V122356-5 BLT 041399 2.0 RADIUS TA-V


KOMAX ALPHA & GAMMA MACHINE SERIESTANGENT RADIUS “V” STRIP BLADES

CLASS: TA-V

TANGENT RADIUS “V” STRIP BLADES

The sharp edge is ground to an arc whose radius approximates awg wiresize. The entry angle lines meet the arc at a tangent point. This type of blade,when closed, presents a diamond shaped edge profile.

Advantages: by adjusting cutter head shut height, (if insulation materialand wall thickness allow), you can process adjacent wire extrusions.

Disadvantages: inadequate for processing thin wall and/or hard insulationssuch as cross-link or fiberglass jackets.

122356-XX

- Uncoated Blades Available -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

lAKES PRECISION iNC

.

KOMAX GAMMA 255 MACHINE SERIESTANGENT RADIUS “V” STRIP BLADES

CLASS: TA-V

mmDIA SIZE ITEM NUMBER OEM # DESCRIPTION

.14 123727-3 0065331 3V TA-V STRIP

.20 123727-4 0065332 3V TA-V STRIP0.5 123727-1 0065333 3V TA-V STRIP1.0 123727-2 0065334 3V TA-V STRIP

- TC Coating Available -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

123727-XX


The sharp edge is ground to an arc whose radius approximates awg wire size. The entryangle lines meet the arc at a tangent point. This type of blade, when closed, presents a diamondshaped edge profile.

Advantages: by adjusting cutter head shut height, (if insulation material and wall thicknessallow), you can process adjacent wire sizes with the same blade, or you could compensate foroff-center wire extrusions.

Disadvantages: inadequate for processing thin wall and/or hard insulations such as cross-link or fiberglass jackets.

ITEM NUMBER MARK DESCRIPTION ITEM NUMBER MARK DESCRIPTION 122651-031 0.8 TR-V STRIP 122651-078 2.0 TR-V STRIP122651-039 1.0 TR-V STRIP 122651-087 2.2 TR-V STRIP122651-047 1.2 TR-V STRIP 122651-095 2.4 TR-V STRIP122651-051 1.3 TR-V STRIP 122651-102 2.6 TR-V STRIP122651-055 1.4 TR-V STRIP 122651-106 2.7 TR-V STRIP122651-059 1.5 TR-V STRIP 122651-140 3.6 TR-V STRIP122651-067 1.7 TR-V STRIP 122651-165 4.2 TR-V STRIP

lAKES PRECISION iNC

.

KOMAX GAMMA 333 MACHINE SERIESTRU-RADIUS “ V ” STRIP BLADES

CLASS: TR-V

TC COATING AVAILABLE

122651-XX

TRU-RADIUS STRIP BLADEThe sharp edge is ground to a half circle whose radius approximates awg wire size.

The entry angle lines intersect the half circle at the quadrant points.This type of blade, whenclosed, presents a true circle profile.

Advantages: this type of blade is excellent for precise and clean jacket removalbecause it combines the scissor-like shearing action of the by-pass blade with the exacthole profile matching a conductor gauge. Excellent for thin wall cross-link PVC and mostrubbery or elastic insulations (thin or thick wall).

Disadvantages: shut height cannot be modified to process adjacent wire sizes. Offcenter wire condition has to be considered when choosing blade size.

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

mmDIA SIZE ITEM NUMBER OEM # DESCRIPTION CLASS

------ 122357 TC 037943 UPPER REJECT TERM WE-A------ 122241 TC 030297 CUT UPPER TA-V------ 122242 TC 034645 CUT BOTTOM TA-V------ 122243 TC ---------- TOP MKI CUTOFF TA-V------ 122546 TC 041595 CUT TOP UN-V------ 122547 TC 041596 CUT BOTTOM BY-M UN-V------ 122460 TC 037862 BOTTOM REJECT TERM WE-A------ 122821 TC 041597 CUT TOP REJECT TERM UN-V------ 122821 BLT 041558 CUT TOP REJECT TERM UN-V------ 122912 TC ---------- CUT TOP UN-V------ 122912 BLT 041556 CUT TOP UN-V------ 122913 TC ---------- CUT BOTTOM BY-M UN-V------ 122913 BLT 041557 CUT BOTTOM BY-M UN-V------ 122240 TC 040966 CUT / STRIP (VT1A) TA-V------ 122826-1 TC ---------- 20 DEG BY-M UN-V------ 122826-2 TC ---------- 30 DEG BY-M UN-V

lAKES PRECISION iNC

.

KOMAX ALPHA & GAMMA MACHINE SERIESCUT & REJECT BLADES

122546 122241 122826122912 122240

122243

122242 122357

122913

122460 122547

122821


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


lAKES PRECISION iNC

.

KOMAX 433S MACHINE SERIESTANGENT RADIUS STRIP / CUT & REJECT BLADES

CLASS: UN-V

0.2 122800 TC 048492 0.1 RADIUS1.0 122669 TC 045592 0.5 RADIUS1.5 122802 TC 045588 0.75 RADIUS2.0 122674 TC 045589 1.0 RADIUS2.2 123392-1TC ---------- 1.1 RADIUS3.0 122668 TC 045590 1.5 RADIUS4.0 122799 TC 045591 2.0 RADIUS5.0 123372 TC 006222 2.5 RADIUS---- 122889 TC --------- UN-V STRIP

UNIVERSAL ENTRY ANGLEThe sharp edge is ground at an angle that results in a “V” opening of exactly 90 degrees.

Characteristics: 90 degree angle is widely accepted as the best entry angle to use for process-ing a wide range of wire sizes using the same blade setup. Most of the time, this class of bladeincorporates a sharp edge ground to a very small or non-existing radius. It works sufficiently formost standard wall insulations but is marginal for thin wall, cross-linked pvc, very rubbery insu-lations, woven fiber or thin-walled multi-conductors.

KOMAX 433S MACHINE SERIESCUT & REJECT BLADES

122670 122673123804-X

122672123803-X

- Uncoated Blade Available -122671

123802-X

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

ITEM ITEMNUMBER OEM # DESCRIPTION NUMBER OEM # DESCRIPTION 122670 TC 047954 CUT 0.5 REJECT 123802-4 TC 045597 2.0 TOP CUT122671 TC 045593 CUT BLADE 123803-1 TC 045604 0.75 BTM CUT122672 TC 045603 0.5 CUT BOTTOM 123803-2 TC 045605 1.0 BTM CUT122673 TC 045598 CUT BTM BAD WR 123803-3 TC 045606 1.5 BTM CUT123802-1 TC 045594 0.75 TOPCUT 123803-4 TC 045607 2.0 BTM CUT123802-2 TC 045595 1.0 TOP CUT 123804-1 TC 045599 0.75 BTM BAD WR123802-3 TC 045596 1.5 TOP CUT 123804-2 TC 045600 1.0 BTM BAD WR

INCHITEM NUMBER DIA SIZE DESCRIPTION

123088-047 .047 TR-V STRIP123088-055 .055 TR-V STRIP123088-063 .063 TR-V STRIP123088-069 .069 TR-V STRIP123088-078 .078 TR-V STRIP123088-087 .087 TR-V STRIP123088-112 .112 TR-V STRIP123088-130 .130 TR-V STRIP123088-152 .152 TR-V STRIP123088-158 .158 TR- V STRIP


lAKES PRECISION iNC

.

KOMAX ALPHA 477 MACHINE SERIESUNIVERSAL CUT-OFF BLADES

CLASS: UN-V

------ 123109 048875 CUT BLADE------ 123117 048876 LOWER CUT BLADE

123117 - COATED OR UNCOATED BLADES AVAILABLE -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

123109

UNIVERSAL CUT-OFF BLADESThe sharp edge is ground to a radius size. The entry angle lines

meet the radius at a tangent point. This type of blade, when closed,presents a diamond shaped edge profile.

Characteristics: sharp edges cut by slicing, creating a gradualcut. This produces less deformation of the material being cut. Cuttingedges must be able to by-pass each other. This type cut-off is best usedwith circular shaped wire.

KOMAX 433-S ALPHA MACHINE SERIESTRU-RADIUS “V” BLADES

CLASS: TR-V

TRU-RADIUS STRIP BLADEThe sharp edge is ground to a half circle whose radius approximates awg wire

size. The entry angle lines intersect the half circle at the quadrant points. This type ofblade, when closed, presents a true circle profile. Advantages: this type of blade isexcellent for precise and clean jacket removal because it combines the scissor-likeshearing action of the by-pass blade with the exact hole profile matching a conductorgauge. Excellent for thin wall cross-link PVC and most rubbery or elastic insulations(thin or thick wall).Disadvantages: shut height cannot be modified to process adjacentwire sizes. Off center wire condition has to be considered when choosing blade size.

ITEM NUMBER OEM # DESCRIPTION

123191 047636 LOWER UN-V CUT-OFF

lAKES PRECISION iNC

.

KOMAX ALPHA MACHINE SERIESUNIVERSAL CUT-OFF BLADES

CLASS: UN-V


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

UNIVERSAL CUT-OFF BLADESThe sharp edge is ground to a radius size. The entry angle lines meet the

radius at a tangent point. This type of blade, when closed, presents a diamondshaped edge profile.

Characteristics: sharp edges cut by slicing, creating a gradual cut. Thisproduces less deformation of the material being cut. Cutting edges must be ableto by-pass each other. This type cut-off is best used with circular shaped wire.


KOMAX ALPHA 488 MACHINE SERIESCOLLINEAR RADIUS STRIP BLADES

CLASS: CL-Rmm ITEM mm ITEM mm ITEM

DIA SIZE NUMBER DIA SIZE NUMBER DIA SIZE NUMBER 0.4 123210-1 2.1 123210-18 3.9 123210-360.5 123210-2 2.2 123210-19 4.0 123210-370.6 123210-3 2.3 123210-20 4.1 123210-380.7 123210-4 2.4 123210-21 4.2 123210-390.8 123210-5 2.5 123210-22 4.3 123210-400.9 123210-6 2.6 123210-23 4.4 123210-411.0 123210-7 2.7 123210-24 4.5 123210-421.1 123210-8 2.8 123210-25 4.6 123210-431.2 123210-9 2.9 123210-26 4.7 123210-441.3 123210-10 3.0 123210-27 4.8 123210-451.4 123210-11 3.1 123210-28 4.9 123210-461.5 123210-12 3.2 123210-29 5.0 123210-471.55 123210-54 3.3 123210-30 5.1 123210-481.6 123210-13 3.4 123210-31 5.2 123210-491.7 123210-14 3.5 123210-32 5.3 123210-501.8 123210-15 3.6 123210-33 5.4 123210-511.9 123210-16 3.7 123210-34 5.5 123210-522.0 123210-17 3.8 123210-35 5.6 123210-53


<--<--M A I N M E N U

O E M M E N U

M A C H I N E M E N U

N E X T

COLLINEAR RADIUS TYPE

The sharp edge is ground to a half circle whose radius approximatesawg wire size. Shearing edge is ground to a straight edge. This type of blade,when closed to shut height,forms a perfect circle profile. Advantages: this typeof blade is excellent for precise and clean jacket removal because it exactlymatches conductor gauge. Excellent for thin-wall cross-link pvc and mostapplications where precise jacket removal around the conductor is required,especially with layered coverings such as fiber over plastic, plastic overshields, etc.

Disadvantages: shut height cannot be modified to process adjacentwire sizes. Off-center wire condition has to be considered when choosingblade size.


KOMAX ALPHA 488 MACHINE SERIESCOLLINEAR ANGLE BLADES

CLASS: CL-A

123211 0056026 CL-A CUT BLADE123212 0056029 CL-A CUT BLADE



123211 123212

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

COLLINEAR ANGLE CUT-OFF BLADES

Sharp edge is ground to a flat collinear angle.

Characteristics: Sharp edges cut by shearing action. This class ofblade was designed to allow multiple conductor wire to be processed withoutdeforming the wire. The main advantage of this class is the ability to processmany different wire gauges with the same blades.

CL-A CUTBLADES


KOMAX 40’S MACHINE SERIESCOLINEAR RADIUS STRIP BLADES

CLASS: CL-R

122067-XXTYPE: CL-R

COLLINEAR RADIUS TYPEThe sharp edge is ground to a half circle whose radius approximates awg

wire size. Shearing edge is ground to a straight edge. This type of blade, when closed toshut height, forms a perfect circle profile. Advantages: this type of blade is excellent for precise and clean jacket removal because it exactly matches conductor gauge. Excellentfor thin-wall cross-link pvc and most applications where precise jacket removal around theconductor is required, especially with layered coverings such as fiber over plastic, plasticover shields, etc.Disadvantages: shut height cannot be modified to process adjacent wire sizes. Off-centerwire condition has to be considered when choosing blade size.

Choosing the correct part numberWhen choosing the correct size, the blade diameter chosen should be 0.1mm to

0.15mm larger than the measured conductor size. If Titanium Nitrade coating is desired,add “TC” to the end of the part number.

Example; 122067-1 = 1.2mm Diameter non-coated 122067-1 TC = 1.2mm Diameter Titanium Coated

These blades must be used with wire guides.( See part number 122078 )

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


lAKES PRECISION iNC

.

KOMAX 40’S MACHINE SERIESCOLLINEAR RADIUS STRIP BLADES

CLASS: CL-R

mm ITEM mm ITEM mm ITEMDIA SIZE OEM # NUMBER DIA SIZE OEM # NUMBER DIA SIZE OEM # NUMBER

0.25 003034 122067-123 2.55 ---------- 122067-89 6.5 003098 122067-390.30 003035 122067-113 2.6 003059 122067-16 6.6 003099 122067-790.34 003036 122067-90 2.7 003060 122067-22 6.7 003100 122067-700.40 003037 122067-91 2.75 ---------- 122067-116 6.8 003101 122067-530.45 003038 122067-119 2.8 003061 122067-23 6.9 003102 122067-760.5 003039 122067-58 2.9 003062 122067-24 7.0 003103 122067-540.55 010641 122067-92 3.0 003063 122067-9 7.1 003104 122067-710.6 003040 122067-59 3.1 003064 122067-25 7.2 003105 122067-550.65 010642 122067-83 3.2 003065 122067-29 7.3 003106 122067-720.7 003041 122067-32 3.3 003066 122067-30 7.4 003107 122067-610.75 010643 122067-114 3.35 ---------- 122067-124 7.5 003108 122067-650.8 003042 122067-17 3.4 003067 122067-10 7.6 003109 122067-770.85 010644 122067-84 3.5 003068 122067-31 7.7 003110 122067-730.9 003043 122067-18 3.6 003069 122067-26 7.8 003111 122067-780.95 010645 122067-85 3.7 003070 122067-27 7.9 003112 122067-741.0 003044 122067-12 3.8 003071 122067-28 8.0 003113 122067-951.1 003045 122067-19 3.9 003072 122067-40 8.1 003114 122067-751.15 010647 122067-81 4.0 003073 122067-35 8.2 003115 122067-561.2 003046 122067-1 4.1 003074 122067-48 8.3 003116 122067-961.25 010648 122067-93 4.2 003075 122067-64 8.4 003117 122067-971.3 003047 122067-2 4.3 003076 122067-33 8.5 003118 122067-981.35 010649 122067-82 4.4 003077 122067-46 8.6 003119 122067-991.4 003048 122067-11 4.5 003078 122067-50 8.7 003120 122067-1001.45 010650 122067-94 4.6 003079 122067-60 8.8 003121 122067-1011.5 003049 122067-14 4.7 003080 122067-34 8.9 003122 122067-1021.55 010651 122067-80 4.8 003081 122067-47 9.0 003123 122067-631.6 003050 122067-3 4.9 003082 122067-36 9.1 003124 122067-1031.65 010652 122067-86 5.0 003083 122067-51 9.2 003125 122067-1041.7 003021 122067-4 5.1 003084 122067-43 9.3 003126 122067-1051.75 010653 122067-87 5.2 003085 122067-44 9.4 003127 122067-1061.8 003051 122067-20 5.3 003086 122067-37 9.5 003128 122067-1071.85 010654 122067-88 5.4 003087 122067-45 9.6 003129 122067-1081.9 003052 122067-15 5.5 003088 122067-41 9.7 003130 122067-1091.95 010655 122067-121 5.6 003089 122067-62 9.8 003131 122067-1102.0 003053 122067-5 5.7 003090 122067-57 9.9 003132 122067-1112.1 003054 122067-6 5.8 003091 122067-49 10.0 003133 122067-1122.15 ---------- 122067-115 5.9 003092 122067-69 11.3 ---------- 122067-1222.2 003055 122067-7 6.0 003093 122067-38 11.5 ---------- 122067-682.3 003056 122067-21 6.1 003094 122067-42 12.0 ---------- 122067-1172.35 ----------- 122067-120 6.2 003095 122067-66 12.5 ---------- 122067-1182.4 003057 122067-8 6.3 003096 122067-52 ----- ---------- ----------------2.5 003058 122067-13 6.4 003097 122067-67 ----- ---------- ----------------

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX 40’S MACHINE SERIESRADIUS WIRE GUIDES

122078

RADIUS WIRE GUIDE

Wire guides are used in conjunction with collinear radius strip blades to preciselyguide the conductor into the strip area of the blade. This will help prevent the conductorfrom coming in contact with the cutting edges of the strip blades, preventing prematurestrip blade wear.

Choosing the correct part numberWhen choosing the correct size, the guide diameter chosen should be 0.00mm to

0.1mm larger than the measured insulation diameter.Example; 122078-1 = 1.6mm Diameter guide

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

lAKES PRECISION iNC

.

KOMAX 40’S MACHINE SERIESRADIUS WIRE GUIDES

mm ITEM mm ITEM mm ITEMDIA SIZE OEM # NUMBER DIA SIZE OEM # NUMBER DIA SIZE OEM # NUMBER

0.5 003134 122078-87 4.2 003170 122078-22 7.9 003207 122078-820.6 003135 122078-70 4.3 003171 122078-21 8.0 003208 122078-830.7 003136 122078-73 4.4 003172 122078-54 8.1 003209 122078-930.8 003137 122078-76 4.5 003173 122078-18 8.2 003210 122078-890.9 003138 122078-60 4.6 003174 122078-47 8.3 003211 122078-831.0 003139 122078-49 4.7 003175 122078-19 8.4 003212 122078-941.1 003140 122078-57 4.8 003176 122078-32 8.5 003213 122078-721.2 003141 122078-48 4.9 003177 122078-33 8.6 003214 122078-841.3 003142 122078-23 5.0 003178 122078-35 8.7 003215 122078-901.4 003143 122078-34 5.1 003179 122078-15 8.8 003216 122078-851.5 003144 122078-16 5.2 003180 122078-63 8.9 003217 122078-951.6 003145 122078-1 5.3 003181 122078-52 9.0 003218 122078-511.7 003146 122078-17 5.4 003182 122078-59 9.1 003219 122078-961.8 003147 122078-30 5.5 003183 122078-36 9.2 003220 122078-971.9 003148 122078-28 5.6 003184 122078-58 9.3 003221 122078-982.0 003149 122078-2 5.7 003185 122078-43 9.4 003222 122078-992.1 003150 122078-31 5.8 003186 122078-61 9.5 003223 122078-912.2 003151 122078-3 5.9 003187 122078-55 9.6 003224 122078-1002.3 003152 122078-10 6.0 003188 122078-37 9.7 003225 122078-1012.4 003153 122078-25 6.1 003189 122078-74 9.8 003226 122078-462.5 003154 122078-24 6.2 003190 122078-38 9.9 003227 122078-1022.6 003155 122078-4 6.3 003191 122078-39 10.0 003228 122078-712.7 003023 122078-5 6.4 003192 122078-77 10.5 ---------- 122078-922.8 003156 122078-11 6.5 003193 122078-40 10.6 ---------- 122078-532.9 003157 122078-42 6.6 003194 122078-64 12.0 ---------- 122078-863.0 003158 122078-6 6.7 003195 122078-41 12.8 ---------- 122078-883.1 003159 122078-12 6.8 003196 122078-563.2 003160 122078-26 6.9 003197 122078-783.3 003161 122078-7 7.0 003198 122078-443.4 003162 122078-29 7.1 003199 122078-793.5 003163 122078-20 7.2 003200 122078-503.6 003164 122078-27 7.3 003201 122078-753.7 003165 122078-8 7.4 003202 122078-653.8 003166 122078-13 7.5 003203 122078-803.9 003167 122078-9 7.6 003204 122078-454.0 003168 122078-14 7.7 003205 122078-674.1 003169 122078-68 7.8 003206 122078-81

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX 40’S MACHINE SERIESUNIVERSAL STRIP BLADES

CLASS: UN-V

122542-XXUNIVERSAL STRIP BLADES

The sharp edge is ground at an angle that results in a “V ”opening of exactly 90 degrees.

Characteristics: 90 degree angle is widely accepted as thebest entry angle to use for processing a wide range of wire sizesusing the same blade setup. Most of the time, this class of bladeincorporates a sharp edge ground to a very small or non-existingradius. It works sufficiently for most of standard wall insulation but ismarginal for thin wall, cross-linked pvc, very rubbery insulations,woven fiber or thin-walled multi-conductors.

KOMAX 40’S COLLINEAR ANGLE CUT-OFF BLADES

Sharp edge is ground to a collinear angle.

Characteristics: Sharp edges cut by compression.This class of blade was designed to allow positive control of

cutter head closure. It also allows precision processing of specificwire sizes with an inherant blade longevity.

This type of blade is used with collinear radius strip blades.

KOMAX 40’STANGENT ANGLE CUT-OFF BLADES

The sharp edge is ground to a radius size. The entry anglelines meet the radius at a tangent point. This type of blade, whenclosed, presents a diamond shaped edge profile.

Characteristics: sharp edges cut by slicing, creating a gradualcut. This produces less deformation of the material being cut. Cuttingedges must be able to by-pass each other. This type cut-off is bestused with circular shaped wire.

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

lAKES PRECISION iNC

.

KOMAX 40’S UNIVERSAL STRIP BLADES


122542-1 TC 003011 STRIP V1A1122542-2 TC 003017 STRIP V1A2122542-3 TC 003012 STRIP V1B1122542-4 TC 003018 STRIP V1B2

KOMAX 40’S COLLINEAR ANGLE CUT-OFF BLADES

mm THICK ITEM NUMBER OEM # DESCRIPTION

KOMAX 40’S MACHINE SERIES

2.0 122068 TC 003020 CUT CL-A2.0 122068 ---------- CUT CL-A1.0 122533-1 TC ---------- CUT CL-A 1.01.5 122533-2 TC ---------- CUT CL-A 1.51.0 122173-1 ---------- CUT T5 / 1 20 DEG1.0 122173-1 TC 010283 CL-A T5 / 1 20 DEG1.2 122173-4 ---------- CL-A THICK CUT-OFF1.2 122173-4 TC ---------- CL-A THICK CUT-OFF2.0 122173-2 ---------- CL-A T5 45 DEG2.0 122173-2 TC ---------- CL-A T5 45 DEG2.0 122173-3 ---------- CL-A T5 30 DEG2.0 122173-3 TC ---------- CL-A T5 30 DEG

122885 ---------- CL-A HEAVY CUT

KOMAX 40’S TANGENT ANGLE CUT - OFF BLADES


122284-11 TC KWCL122284-16 TC KWCLS122284-17 TC KWDCL122879 TA-V BY-M122202 T1 V TYPE CUT122202 TC 003010 T1 V TYPE CUT

- THESE BLADES ARE SOLD AS A BLADE SET -BLADE SET OEM # - 010285


- Coated OR Uncoated Blades Available -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX 40’S MACHINE SERIESTRU-RADIUS STRIP BLADES

CLASS: TR-V

122777-XXWIDE ENTRY ANGLE

Sharp edge is ground at an angle that results in a “V”opening above 90 degrees.

Characteristics: wide angle is not as effective forgathering wire towards the operating radius. This type workswell for gathering thick, soft insulations, (such as ignitionwire).

122367-XXNARROW ENTRY ANGLE

Sharp edge is ground at an angle that results in a “V”opening up to 60 degrees.

Characteristics: narrow angle assists in wire gathering towards the operating radius, also tends to helpcut insulation closer to conductor size without touching it.Slicing action is better due to the narrow angle.

TRU-RADIUS STRIP BLADEThe sharp edge is ground to a half circle whose radius

approximates awg wire size. The entry angle lines intersectthe half circle at the quadrant points.This type of blade, whenclosed, presents a true circle profile.

Advantages: this type of blade is excellent for preciseand clean jacket removal because it combines the scissor-like shearing action of the by-pass blade with the exact holeprofile matching a conductor gauge. Excellent for thin wallcross-link PVC and most rubbery or elastic insulations (thinor thick wall).

Disadvantages: shut height cannot be modified toprocess adjacent wire sizes. Off center wire condition has tobe considered when choosing blade size.

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

mmDIA SIZE ITEM NUMBER DESCRIPTION CLASS

mmDIA SIZE ITEM NUMBER DESCRIPTION CLASS

lAKES PRECISION iNC

.


WIDE ENTRY ANGLE

1.0 122777-039 TC 123 DEG.WE-A TA-V1.2 122777-047 TC 123 DEG.WE-A TA-V1.4 122777-055 TC 123 DEG.WE-A TA-V1.7 122777-067 TC 123 DEG.WE-A TA-V2.0 122777-079 TC 123 DEG.WE-A TA-V2.6 122777-102 TC 123 DEG.WE-A TA-V3.2 122777-126 TC 123 DEG.WE-A TA-V

1.0 122367-1 SHORT BY-M TR-V1.0 122367-2 LONG BY-M TR-V1.2 122367-3 SHORT BY-M TR-V1.2 122367-4 LONG BY-M TR-V1.4 122367-5 SHORT BY-M TR-V1.4 122367-6 LONG BY-M TR-V1.7 122367-7 SHORT BY-M TR-V1.7 122367-8 LONG BY-M TR-V2.0 122367-9 SHORT BY-M TR-V2.0 122367-10 LONG BY-M TR-V2.6 122367-11 SONG BY-M TR-V2.6 122367-12 LONG BY-M TR-V2.8 122367-15 SHORT BY-M TR-V2.8 122367-16 LONG BY-M TR-V4.5 122367-17 SHORT BY-M TR-V4.5 122367-18 LONG BY-M TR-V4.6 122367-19 SHORT BY-M TR-V4.6 122367-20 LONG BY-M TR-V6.3 122367-13 SHORT BY-M TR-V6.3 122367-14 LONG BY-M TR-V


STANDARD ENTRY ANGLE



<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

mmDIA SIZE STYLE ITEM NUMBER DESCRIPTION CLASS

0.25 -- B -- 122284-12 TC STRIP 0.25 TA-V0.5 -- A -- 122284-13 TC STRIP 0.5 TA-V1.0 -- A -- 122284-1 TC STRIP 1.0 TA-V1.0 -- B -- 122284-14 TC STRIP 1.0S TA-V1.1 -- A -- 122284-2 TC STRIP 1.1 TA-V1.2 -- A -- 122284-3 TC STRIP 1.2 TA-V1.3 -- A -- 122284-4 TC STRIP 1.3 TA-V1.4 -- A -- 122284-5 TC STRIP 1.4 TA-V1.5 -- A -- 122284-6 TC STRIP 1.5 TA-V1.5 -- B -- 122284-15 TC STRIP 1.5S TA-V1.6 -- A -- 122284-7 TC STRIP 1.6 TA-V1.7 -- A -- 122284-8 TC STRIP 1.7 TA-V1.8 -- A -- 122284-9 TC STRIP 1.8 TA-V1.9 -- A -- 122284-10 TC STRIP 1.9 TA-V


KOMAX 40’S MACHINE SERIESTANGENT RADUIS “V” STRIP BLADES

EQUAL LENGTH

TANGENT RADIUS “V” STRIP BLADES122284-XX

The sharp edge is ground to an arc whose radius aproximates awg wire size.The entry angle lines meet the arc at a tangent point. This type of blade, when closed,presents a diamond shaped edge profile.

Advantages: by adjusting cutter head shut height (if insulation material and wallthickness allow), you can process adjacent wire sizes with the same blade, or youcould compensate for off-center wire extrusions.

Disadvantages: inadequate for processing thin wall and/or hard insulations suchas cross-link or fiberglass jackets.

- UNCOATED BLADES AVAILABLE -

STYLEA

STYLEB

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

lAKES PRECISION iNC

.

KOMAX 40’S MACHINE SERIESVARIABLE SPACERS & SPACER SETS

mm SIZE OEM # ITEM NUMBER mm SIZE OEM # ITEM NUMBER.025 ---------- 122102-36 5.7 ---------- 122102-400.4 ---------- 122102-47 6.0 ---------- 122102-100.5 ---------- 122102-1 6.5 ---------- 122102-140.6 ---------- 122102-42 7.0 ---------- 122102-150.7 ---------- 122102-37 7.2 ---------- 122102-410.75 ---------- 122102-43 7.5 ---------- 122102-160.8 ---------- 122102-44 8.0 ---------- 122102-171.0 003139 122102-2 8.5 ---------- 122102-181.1 ---------- 122102-48 9.0 ---------- 122102-191.2 ---------- 122102-35 9.5 ---------- 122102-201.25 ---------- 122102-45 10.0 003029 122102-111.3 ---------- 122102-49 10.5 ---------- 122102-211.4 ---------- 122102-46 11.0 ---------- 122102-221.5 003144 122102-3 11.5 ---------- 122102-232.0 003014 122102-4 12.0 ---------- 122102-242.3 ---------- 122102-38 12.5 ---------- 122102-252.5 ---------- 122102-5 13.0 ---------- 122102-263.0 003013 122102-6 13.5 ---------- 122102-273.5 ---------- 122102-7 14.0 ---------- 122102-283.9 ---------- 122102-39 14.5 ---------- 122102-294.0 ---------- 122102-8 15.0 ---------- 122102-304.5 ---------- 122102-12 15.5 ---------- 122102-315.0 003880 122102-13 16.0 ---------- 122102-325.5 ---------- 122102-9 16.5 ---------- 122102-33

17.0 ---------- 122102-34

VARIABLE SPACERSThe wire end strip dimension is obtained by physically inserting spacers of

different thickness in-between the blade bodies. The assembly is then held in place by set screwsor other fastening devices.

This system involves measurement calculations in order to figure the correct spacer-bladecombinations. Because of its inherent cumbersome nature, it is highly recommended that this setupbe performed in anticipation to a scheduled production run.

To optimize equipment productivity, it is a good idea to have several sets of pre-assembledblade mounts ready for production schedules.

KX 10 - 10 - 5-122134 SPACER SET KX 20 - 20 - 5-122336 SPACER SET

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX 40 / 42 / 43 MACHINE SERIESTOOLHOLDERS

ITEM NO. DESCRIPTION ITEM NO. DESCRIPTION

5-122537 10 / 10 DOUBLE ASSY W / O BLADES 122297 10 / 10 UPPER DOUBLE5-122428 10 / 10 DOUBLE BLADE ASSY 122298 10 / 10 LOWER DOUBLE5-122299 10 / 10 TOP DOUBLE W / SCREWS 122429 20 / 20 UPPER DOUBLE5-122300 10 / 10 LOWER DBL. W / SCREWS 122430 20 / 20 LOWER DOUBLE5-122361 10 / 10 TOP & LOWER W / SPACERS 122285 20 / 20 UPPER5-122133 10 / 10 TOP & LOWER W / SCREWS 122286 20 / 20 LOWER5-122337 20 / 20 TOP & LOWER 122289 20 / 20 SCREW ALIGN5-122288 20 / 20 TOP & LOWER W / O SPACERS 122137-1 10 / 10 SCREW ALIGN

122137-2 10 / 10 & 20 / 20 NUT122135 10 / 10 UPPER122136 10 / 10 LOWER

TOOLHOLDERSPurchase choices range from a complete assembly, with spacers, to a single

toolholder, individual screw or nut. For an assembly with pre-installed blades for yourspecific application, please contact sales for further information.

10 /10122135 UPPER122136 LOWER

10 /10 DOUBLE122297 UPPER122298 LOWER

20 / 20 DOUBLE122429 UPPER122430 LOWER

20 / 20122285 UPPER 122286 LOWER

122137-1

122289

122137-2

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

ITEM NUMBER OEM # MODEL DESCRIPTION CLASS

lAKES PRECISION iNC

.

KOMAX 33 / 34 / 35 / 36 MACHINE SERIESSTANDARD CUT / STRIP BLADES

KOMAX 33 / 34 / 35 / 36 MACHINE SERIESSTANDARD CUT / STRIP BLADES

122436-1 110106 KX33 CUT / STRIP SHORT UN-V122436-2 110106 KX33 CUT / STRIP LONG UN-V122200 016497 KX34 CUT / STRIP BY-M TA-V122309-1 042496 KX34 CUT / STRIP SHORT BY-M CL-A122309-2 042496 KX34 CUT / STRIP LONG BY-M CL-A122206 18810 KX35 CUT / STRIP UN-V122545-1 30892 KX36 CUT / STRIP SHORT UN-V122545-2 30892 KX36 CUT / STRIP LONG UN-V

122309-2KOMAX 34

122206KOMAX 35

122200KOMAX 34

OEM #016498

122436-1 SHORTKOMAX 33

122436-2 LONGKOMAX 33

122545-2LONG

KOMAX 36

122545-1SHORT

KOMAX 36


122309-1

OEM PAIR #042496

OEM PAIR #016497

OEM PAIR #018810

OEM PAIR #030892OEM PAIR #

110106

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX 33 MACHINE SERIESTRU-RADIUS CUT / STRIP BLADES

CLASS: TR-V

mm mm mmDIA SIZE ITEM NUMBER DIA SIZE ITEM NUMBER DIA SIZE ITEM NUMBER

0.4 S 122543-47 1.2 L 122543-12 2.1 S 122543-290.4 L 122543-48 1.3 S 122543-13 2.1 L 122543-300.5 S 122543-49 1.3 L 122543-14 2.2 S 122543-310.5 L 122543-50 1.4 S 122543-15 2.2 L 122543-320.6 S 122543-51 1.4 L 122543-16 2.3 S 122543-330.6 L 122543-52 1.5 S 122543-17 2.3 L 122543-340.7 S 122543-1 1.5 L 122543-18 2.4 S 122543-350.7 L 122543-2 1.6 S 122543-19 2.4 L 122543-360.8 S 122543-3 1.6 L 122543-20 2.5 S 122543-370.8 L 122543-4 1.7 S 122543-21 2.5 L 122543-380.9 S 122543-5 1.7 L 122543-22 2.6 S 122543-390.9 L 122543-6 1.8 S 122543-23 2.6 L 122543-401.0 S 122543-7 1.8 L 122543-24 2.7 S 122543-411.0 L 122543-8 1.9 S 122543-25 2.7 L 122543-421.1 S 122543-9 1.9 L 122543-26 2.8 S 122543-431.1 L 122543-10 2.0 S 122543-27 2.8 L 122543-441.2 S 122543-11 2.0 L 122543-28 5.1 S 122543-45

5.1 L 122543-46

TRU-RADIUS STRIP BLADE122543-XX

The sharp edge is ground to a half circle whose radiusapproximates awg wire size. The entry angle lines intersect the halfcircle at the quadrant points. This type of blade, when closed, pres-ents a true circle profile.

Advantages: this type of blade is excellent for precise andclean jacket removal because it combines the scissor-like shearingaction of the by-pass blade with the exact hole profile matching aconductor gauge. Excellent for thin wall cross-link PVC and mostrubbery or elastic insulations (thin or thick wall).

Disadvantages: shut height cannot be modified to processadjacent wire sizes. Off center wire condition has to be consideredwhen choosing blade size.

S = SHORT BLADE & L = LONG BLADE


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


The sharp edge is ground to a half circle whose radiusapproximates awg wire size. The entry angle lines intersect thehalf circle at the quadrant points. This type of blade, when closed,presents a true circle profile.



lAKES PRECISION iNC

.

KOMAX 34 MACHINE SERIESTRU-RADIUS CUT / STRIP BLADES

CLASS: TR-V


1.0 122535-1 TC 3.1 122535-22 TC 5.2 122535-43 TC1.1 122535-2 TC 3.2 122535-23 TC 5.3 122535-44 TC1.2 122535-3 TC 3.3 122535-24 TC 5.4 122535-45 TC1.3 122535-4 TC 3.4 122535-25 TC 5.5 122535-46 TC1.4 122535-5 TC 3.5 122535-26 TC 5.6 122535-47 TC1.5 122535-6 TC 3.6 122535-27 TC 5.7 122535-48 TC1.6 122535-7 TC 3.7 122535-28 TC 5.8 122535-49 TC1.7 122535-8 TC 3.8 122535-29 TC 5.9 122535-50 TC1.8 122535-9 TC 3.9 122535-30 TC 6.0 122535-51 TC1.9 122535-10 TC 4.0 122535-31 TC 6.1 122535-52 TC2.0 122535-11 TC 4.1 122535-32 TC 6.2 122535-53 TC2.1 122535-12 TC 4.2 122535-33 TC 6.3 122535-54 TC2.2 122535-13 TC 4.3 122535-34 TC 6.4 122535-55 TC2.3 122535-14 TC 4.4 122535-35 TC 6.5 122535-56 TC2.4 122535-15 TC 4.5 122535-36 TC 6.6 122535-57 TC2.5 122535-16 TC 4.6 122535-37 TC 6.7 122535-58 TC2.6 122535-17 TC 4.7 122535-38 TC 6.8 122535-59 TC2.7 122535-18 TC 4.8 122535-39 TC 9.0 122535-60 TC2.8 122535-19 TC 4.9 122535-40 TC 10.0 122535-61 TC2.9 122535-20 TC 5.0 122535-41 TC 11.0 122535-62 TC3.0 122535-21 TC 5.1 122535-42 TC


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

lAKES PRECISION iNC

.

mm ITEM mm ITEMDIA SIZE OEM # NUMBER DESCRIPTION DIA SIZE OEM # NUMBER DESCRIPTION

0.3 ---------- 122253-4 TC CUT / STRIP 4.0 035224 122253-14 TC CUT / STRIP0.5 ---------- 122253-3 TC CUT / STRIP 4.4 ---------- 122253-19 TC CUT / STRIP0.75 ---------- 122253-21 TC CUT / STRIP 4.5 ---------- 122253-10 TC CUT / STRIP1.0 040555 122253-8 TC CUT / STRIP 4.7 ---------- 122253-1 TC CUT / STRIP1.2 ---------- 122253-22 TC CUT / STRIP 5.0 035351 122253-2 TC CUT / STRIP1.3 ---------- 122253-9 TC CUT / STRIP 5.5 ---------- 122253-20 TC CUT / STRIP1.5 ---------- 122253-7 TC CUT / STRIP 6.0 042255 122253-13 TC CUT / STRIP2.0 035220 122253-6 TC CUT / STRIP 6.5 ---------- 122253-12 TC CUT / STRIP2.5 ---------- 122253-16 TC CUT / STRIP 6.7 ---------- 122253-18 TC CUT / STRIP3.0 035222 122253-17 TC CUT / STRIP 8.0 ---------- 122253-5 TC CUT / STRIP3.5 ---------- 122253-11 TC CUT / STRIP 8.5 ---------- 122253-15 TC CUT / STRIP

KOMAX 34 MACHINE SERIESTANGENT-RADIUS “V” CUT / STRIP BLADES

CLASS: TA-V


The sharp edge is ground to an arc whose radius approxi-mates awg wire size. The entry angle lines meet the arc at a tangentpoint. This type of blade, when closed, presents a diamond shapededge profile.

Advantages: by adjusting cutter head shut height, (if insulationmaterial and wall thickness allow), you can process adjacent wiresizes with the same blade, or you could compensate for off-centerwire extrusions.

Disadvantages: inadequate for processing thin wall and/orhard insulations such as cross-link or fiberglass jackets.


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX 34 MACHINE SERIESTANGENT RADIUS “V” CUT / STRIP BLADES

CLASS: TA-V

0.3 123266-4 45 DEGREE TA-V 4.4 123266-19 45 DEGREE TA-V0.5 123266-3 45 DEGREE TA-V 4.5 123266-10 45 DEGREE TA-V1.0 123266-8 45 DEGREE TA-V 4.7 123266-1 45 DEGREE TA-V1.3 123266-9 45 DEGREE TA-V 5.0 123266-2 45 DEGREE TA-V1.5 123266-7 45 DEGREE TA-V 5.5 123266-20 45 DEGREE TA-V2.0 123266-6 45 DEGREE TA-V 6.0 123266-13 45 DEGREE TA-V2.5 123266-16 45 DEGREE TA-V 6.5 123266-12 45 DEGREE TA-V3.0 123266-17 45 DEGREE TA-V 6.7 123266-18 45 DEGREE TA-V3.5 123266-11 45 DEGREE TA-V 8.0 123266-5 45 DEGREE TA-V4.0 123266-14 45 DEGREE TA-V 8.5 123266-15 45 DEGREE TA-V

mm mmDIA SIZE ITEM NUMBER DESCRIPTION DIA SIZE ITEM NUMBER DESCRIPTION

- TC COATING AVAILABLE -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


The sharp edge is ground to an arc whose radius approximates awg wire size. The entryangle lines meet the arc at a tangent point. This type of blade, when closed, presents a diamondshaped edge profile.

Advantages: by adjusting cutter head shut height, (if insulation material and wall thicknessallow), you can process adjacent wire sizes with the same blade, or you could compensate foroff-center wire extrusions.

Disadvantages: inadequate for processing thin wall and/or hard insulations such as cross-link or fiberglass jackets.

123266-XX


KOMAX 34 MACHINE SERIES DUAL UNIVERSAL “V” CUT / STRIP BLADES

CLASS: UN-V


123230 041309 UN-V CUT / STRIP BLADE

123230


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

UNIVERSAL STRIP BLADES

The sharp edge is ground at an angle that results in a “V ” opening ofexactly 90 degrees.

Characteristics: 90 degree angle is widely accepted as the best entry angleto use for processing a wide range of wire sizes using the same blade setup. Mostof the time, this class of blade incorporates a sharp edge ground to a very smallor non-existing radius. It works sufficiently for most of standard wall insulation butis marginal for thin wall, cross-linked pvc, very rubbery insulations, woven fiber orthin-walled multi-conductors.

lAKES PRECISION iNC

.

KOMAX 36 MACHINE SERIESTANGENT-RADIUS “V” CUT / STRIP BLADES

CLASS: TA-V


mm ITEM mm ITEMRADIUS NUMBER OEM # DESCRIPTION RADIUS NUMBER OEM # DESCRIPTION

0.4 122435-23 ---------- CUT / STRIP 0.8S 1.9 122435-20 --------- CUT / STRIP 3.8L0.4 122435-24 ---------- CUT / STRIP 0.8L 2.0 122435-17 035227 CUT / STRIP 4.0S0.55 122435-25 ---------- CUT / STRIP 1.1S 2.0 122435-18 035227 CUT / STRIP 4.0L0.55 122435-26 ---------- CUT / STRIP 1.1L 2.3 122435-21 ---------- CUT / STRIP 4.6S0.8 122435-27 ---------- CUT / STRIP 1.6S 2.3 122435-22 ---------- CUT / STRIP 4.6L0.8 122435-28 ---------- CUT / STRIP 1.6L 2.75 122435-35 ---------- CUT / STRIP 5.5S1.15 122435-29 ---------- CUT / STRIP 2.3S 2.75 122435-36 ---------- CUT / STRIP 5.5L1.15 122435-30 ---------- CUT / STRIP 2.3L 2.8 122435-31 ---------- CUT / STRIP 5.6S1.3 122435-9 ---------- CUT / STRIP 2.6S 2.8 122435-32 ---------- CUT / STRIP 5.6L1.3 122435-10 ---------- CUT / STRIP 2.6L 3.25 122435-7 ---------- CUT / STRIP 6.5S1.5 122435-15 ---------- CUT / STRIP 3.0S 3.25 122435-8 ---------- CUT / STRIP 6.5L1.5 122435-16 ---------- CUT / STRIP 3.0L 3.5 122435-33 ---------- CUT / STRIP 7.0S1.6 122435-11 ---------- CUT / STRIP 3.2S 3.5 122435-34 ---------- CUT / STRIP 7.0L1.6 122435-12 ---------- CUT / STRIP 3.2L 3.55 122435-5 ---------- CUT / STRIP 7.1S1.65 122435-3 ---------- CUT / STRIP 3.3S 3.55 122435-6 ---------- CUT / STRIP 7.1L1.65 122435-4 ---------- CUT / STRIP 3.3L 4.0 122435-13 ---------- CUT / STRIP 8.0S1.75 122435-1 ---------- CUT / STRIP 3.5S 4.0 122435-14 ---------- CUT / STRIP 8.0L1.75 122435-2 ---------- CUT / STRIP 3.5L ----- --------------- ---------- ------------------------1.9 122435-19 ---------- CUT / STRIP 3.8S ----- --------------- ---------- ------------------------

- NOTE: NON-CARBIDE BLADES -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


The sharp edge is ground to an arc whose radius approximatesawg wire size. The entry angle lines meet the arc at a tangent point.This type of blade, when closed, presents a diamond shaped edgeprofile.

Advantages: by adjusting cutter head shut height, (if insulationmaterial and wall thickness allow), you can process adjacent wire sizeswith the same blade, or you could compensate for off-center wireextrusions.

Disadvantages: inadequate for processing thin wall and/or hardinsulations such as cross-link or fiberglass jackets.


KOMAX 34 MACHINE SERIESTRU-RADIUS CUT / STRIP BLADES W/ RELIEF

CLASS: TR-V


1.0 122744-1 2.9 122744-20 4.8 122744-391.1 122744-2 3.0 122744-21 4.9 122744-401.2 122744-3 3.1 122744-22 5.0 122744-411.3 122744-4 3.2 122744-23 5.1 122744-421.4 122744-5 3.3 122744-24 5.2 122744-431.5 122744-6 3.4 122744-25 5.3 122744-441.6 122744-7 3.5 122744-26 5.4 122744-451.7 122744-8 3.6 122744-27 5.5 122744-461.8 122744-9 3.7 122744-28 5.6 122744-471.9 122744-10 3.8 122744-29 5.7 122744-482.0 122744-11 3.9 122744-30 5.8 122744-492.1 122744-12 4.0 122744-31 5.9 122744-502.2 122744-13 4.1 122744-32 6.0 122744-512.3 122744-14 4.2 122744-33 6.1 122744-522.4 122744-15 4.3 122744-34 6.2 122744-532.5 122744-16 4.4 122744-35 6.3 122744-542.6 122744-17 4.5 122744-36 6.4 122744-552.7 122744-18 4.6 122744-37 6.5 122744-562.8 122744-19 4.7 122744-38 6.6 122744-57

6.7 122744-58

TRU-RADIUS STRIP BLADEThe sharp edge is ground to a half circle whose radius approximates awg

wire size. The entry angle lines intersect the half circle at the quadrantpoints.This type of blade, when closed, presents a true circle profile.

Advantages: this type of blade is excellent for precise and clean jacketremoval because it combines the scissor-like shearing action of the by-passblade with the exact hole profile matching a conductor gauge. Excellent for thinwall cross-link PVC and most rubbery or elastic insulations (thin or thick wall).

Disadvantages: shut height cannot be modified to process adjacent wiresizes. Off center wire condition has to be considered when choosing blade size.


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

TRU-RADIUS “V” STRIP BLADE122660-XX

The sharp edge is ground to a half circle whose radiusapproximates awg wire size. The entry angle lines intersect the halfcircle at the quadrant points. This type of blade, when closed, pres-ents a true circle profile.



lAKES PRECISION iNC

.

KOMAX 36 MACHINE SERIESTRU-RADIUS “V” CUT / STRIP BLADES

CLASS : TR-V


1.0 122660-039L 3.5 122660-140S 6.5 122660-255L1.0 122660-039S 3.8 122660-152L 6.5 122660-255S1.2 122660-047L 3.8 122660-152S 6.6 122660-260L1.2 122660-047S 4.0 122660-160L 6.6 122660-260S1.4 122660-055L 4.0 122660-160S 7.1 122660-280L1.4 122660-055S 4.4 122660-175L 7.1 122660-280S1.7 122660-067L 4.4 122660-175S 7.6 122660-300L1.7 122660-067S 4.8 122660-190L 7.6 122660-300S2.0 122660-078L 4.8 122660-190S 7.9 122660-315L2.0 122660-078S 5.0 122660-200L 7.9 122660-315S2.3 122660-090L 5.0 122660-200S 8.1 122660-320L2.3 122660-090S 5.5 122660-220L 8.1 122660-320S2.6 122660-102L 5.5 122660-220S 8.6 122660-340L2.6 122660-102S 6.0 122660-240L 8.6 122660-340S2.8 122660-112L 6.0 122660-240S 9.1 122660-360L2.8 122660-112S 6.2 122660-245L 9.1 122660-360S3.2 122660-125L 6.2 122660-245S 9.6 122660-380L3.2 122660-125S 6.5 122660-225L 9.6 122660-380S3.5 122660-140L 10.0 122660-395L

10.0 122660-395SS = SHORT BLADEL = LONG BLADE


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

5-122329KOMAX 30

5-122397KOMAX 30/31

5-122339KOMAX 30


KOMAX 30 / 31 MACHINE SERIESSTANDARD / STRAIGHT EDGE / UNIVERSAL

CUT / STRIP BLADES

ITEM NUMBER OEM # MODEL DESCRIPTION CLASS

5-122339 010386 KX30 CUT / STRIP BLADE SET BY-M CL-A5-122329 016532 KX30 CUT / STRIP BLADE SET BY-M CL-A122254-1 ---------- KX31 CUT / STRIP TOP CL-A122254-2 ---------- KX31 CUT / STRIP BOTTOM CL-A5-122254 ---------- KX31 CUT / STRIP SET CL-A5-122397-XX ---------- KX30/31 CUT / STRIP RIBBON CL-A5-122540-XX ---------- KX31 CUT / STRIP .024 RIBBON BY-M CL-A

5-122540-XXKOMAX 31

KOMAX 30 / 31 MACHINE SERIESSTANDARD / STRAIGHT EDGE / UNIVERSAL

CUT / STRIP BLADES

5-122254KOMAX 31


- SEND RIBBON CABLES TO LAKES PRECISION FOR BLADE SIZING -

RIBBON CABLE

RIBBON CABLE

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


The sharp edge is ground to a half circle whose radius approximates awgwire size. The entry angle lines intersect the half circle at the quadrant points. Thistype of blade, when closed, presents a true circle profile.

Advantages: this type of blade is excellent for precise and clean jacketremoval because it combines the scissor-like shearing action of the by-pass bladewith the exact hole profile matching a conductor gauge. Excellent for thin wallcross-link PVC and most rubbery or elastic insulations (thin or thick wall).

Disadvantages: shut height cannot be modified to process adjacent wiresizes. Off center wire condition has to be considered when choosing blade size.

lAKES PRECISION iNC

.

KOMAX 210 / 220 / 230 MACHINE SERIESTRU-RADIUS “V” CUT / STRIP BLADES

CLASS : TR-V


0.5 122538-58 TC 2.8 122538-19 TC 5.0 122538-41 TC 0.7 122538-59 TC 2.9 122538-20 TC 5.1 122538-42 TC0.8 122538-60 TC 3.0 122538-21 TC 5.2 122538-43 TC0.9 122538-61 TC 3.1 122538-22 TC 5.3 122538-44 TC1.0 122538-1 TC 3.2 122538-23 TC 5.4 122538-45 TC1.1 122538-2 TC 3.3 122538-24 TC 5.5 122538-46 TC1.2 122538-3 TC 3.4 122538-25 TC 5.6 122538-47 TC1.3 122538-4 TC 3.5 122538-26 TC 5.7 122538-48 TC1.4 122538-5 TC 3.6 122538-27 TC 5.8 122538-49 TC1.5 122538-6 TC 3.7 122538-28 TC 5.9 122538-50 TC1.6 122538-7 TC 3.8 122538-29 TC 6.0 122538-51 TC1.7 122538-8 TC 3.9 122538-30 TC 6.1 122538-52 TC1.8 122538-9 TC 4.0 122538-31 TC 6.2 122538-53 TC1.9 122538-10 TC 4.1 122538-32 TC 6.3 122538-54 TC2.0 122538-11 TC 4.2 122538-33 TC 6.4 122538-55 TC2.1 122538-12 TC 4.3 122538-34 TC 6.5 122538-56 TC2.2 122538-13 TC 4.4 122538-35 TC 6.6 122538-57 TC2.3 122538-14 TC 4.5 122538-36 TC 6.8 122538-63 TC2.4 122538-15 TC 4.6 122538-37 TC 7.0 122538-62 TC2.5 122538-16 TC 4.7 122538-38 TC 9.0 122538-64 TC2.6 122538-17 TC 4.8 122538-39 TC 10.0 122538-65 TC2.7 122538-18 TC 4.9 122538-40 TC 11.0 122538-66 TC


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

ITEM NUMBER DESCRIPTION

lAKES PRECISION iNC.<--MAIN MENU

OEM MENU

MACHINE MENU

NEXTKOMAX KAPPA 210 / 220 / 225

UNIVERSAL CUT / STRIP BLADESCLASS: UN-V

For more information on these blades, or specific sizes, contactLakes Precision, Inc.


123284 -XX 2 CONDUCTOR UN-V CUT / STRIP

123284-XX


The sharp edge is ground at an angle that results in a “V ” opening of exactly 90degrees.

Characteristics: 90 degree angle is widely accepted as the best entry angle to use forprocessing a wide range of wire sizes using the same blade setup. Most of the time, this classof blade incorporates a sharp edge ground to a very small or non-existing radius. It workssufficiently for most of standard wall insulation but is marginal for thin wall, cross-linked pvc,very rubbery insulations, woven fiber or thin-walled multi-conductors.

lAKES PRECISION iNC

.

KOMAX KAPPA 230 MACHINE SERIESTANGENT ANGLE “V” STRIP BLADES

CLASS: TA-V


0.4 122753-12 ---------- KX KAPPA 230 .20 STRIP0.7 122753-7 ---------- KX KAPPA 230 .35 STRIP1.0 122753-16 ---------- KX KAPPA 230 .50 STRIP1.2 122753-8 ---------- KX KAPPA 230 .60 STRIP2.0 122753-14 ---------- KX KAPPA 230 1.0 STRIP3.0 122753-13 ---------- KX KAPPA 230 1.5 STRIP4.0 122753-1 044211 KX KAPPA 230 2.0 STRIP5.0 122753-2 044212 KX KAPPA 230 2.5 STRIP6.0 122753-3 044213 KX KAPPA 230 3.0 STRIP7.0 122753-11 ---------- KX KAPPA 230 3.5 STRIP7.2 122753-10 ---------- KX KAPPA 230 3.6 STRIP8.0 122753-4 044214 KX KAPPA 230 4.0 STRIP8.6 122753-9 ---------- KX KAPPA 230 4.3 STRIP10.0 122753-5 044215 KX KAPPA 230 5.0 STRIP10.7 122753-15 ---------- KX KAPPA 230 5.35STRIP12.0 122753-6 044216 KX KAPPA 230 6.0 STRIP

TANGENT RADIUS “V” STRIP BLADES 122753-XX

The sharp edge is ground to an arc whose radius approximatesawg wire size. The entry angle lines meet the arc at a tangent point.This type of blade, when closed, presents a diamond shaped edgeprofile.

Advantages: by adjusting cutter head shut height, (if insulationmaterial and wall thickness allow), you can process adjacent wireextrusions.

Disadvantages: inadequate for processing thin wall and/or hardinsulations such as cross-link or fiberglass jackets.


- NON-CARBIDE BLADES -

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

mm mmITEM NUMBER DIA SIZE DESCRIPTION ITEM NUMBER DIA SIZE DESCRIPTION

123205-12 0.4 TA-V CUT / STRIP 123205-3 6.0 TA-V CUT / STRIP123205-7 0.7 TA-V CUT / STRIP 123205-11 7.0 TA-V CUT / STRIP123205-8 1.2 TA-V CUT / STRIP 123205-10 7.2 TA-V CUT / STRIP123205-14 2.0 TA-V CUT / STRIP 123205-4 8.0 TA-V CUT / STRIP123205-13 3.0 TA-V CUT / STRIP 123205-9 8.6 TA-V CUT / STRIP123205-1 4.0 TA-V CUT / STRIP 123205-5 10.0 TA-V CUT / STRIP123205-2 5.0 TA-V CUT / STRIP 123205-15 10.7 TA-V CUT / STRIP

123205-6 12.0 TA-V CUT / STRIP


KOMAX KAPPA 230 MACHINE SERIESTA-V 45 DEGREE CUT/ STRIP BLADES

CLASS: TA-V


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

123205-XX

TANGENT RADIUS “V” CUT / STRIP BLADES

The sharp edge is ground to an arc whose radius approximates awg wire size. The entryangle lines meet the arc at a tangent point. This type of blade, when closed, presents adiamond shaped edge profile.

Advantages: by adjusting cutter head shut height, (if insulation material and wallthickness allow), you can process adjacent wire extrusions.

Disadvantages: inadequate for processing thin wall and/or hard insulations such ascross-link or fiberglass jackets.

lAKES PRECISION iNC

.

KOMAX KAPPA 230 MACHINE SERIESTRU-RADIUS CUT / STRIP BLADES

CLASS: TR-V


0.6 122923-84 3.7 122923-28 6.5 122923-561.0 122923-1 3.8 122923-29 6.6 122923-571.1 122923-2 3.9 122923-30 6.7 122923-581.2 122923-3 4.0 122923-31 6.8 122923-591.3 122923-4 4.1 122923-32 6.9 122923-601.4 122923-5 4.2 122923-33 7.0 122923-611.5 122923-6 4.3 122923-34 7.1 122923-621.6 122923-7 4.4 122923-35 7.2 122923-631.7 122923-8 4.5 122923-36 7.3 122923-641.8 122923-9 4.6 122923-37 7.4 122923-651.9 122923-10 4.7 122923-38 7.5 122923-662.0 122923-11 4.8 122923-39 8.0 122923-672.1 122923-12 4.9 122923-40 8.1 122923-792.2 122923-13 5.0 122923-41 8.2 122923-802.3 122923-14 5.1 122923-42 8.3 122923-812.4 122923-15 5.2 122923-43 8.4 122923-822.5 122923-16 5.3 122923-44 8.5 122923-682.6 122923-17 5.4 122923-45 8.7 122923-782.7 122923-18 5.5 122923-46 9.0 122923-692.8 122923-19 5.6 122923-47 9.5 122923-702.9 122923-20 5.7 122923-48 10.0 122923-713.0 122923-21 5.8 122923-49 10.5 122923-723.1 122923-22 5.9 122923-50 10.7 122923-733.2 122923-23 6.0 122923-51 11.0 122923-743.3 122923-24 6.1 122923-52 11.1 122923-753.4 122923-25 6.2 122923-53 11.5 122923-763.5 122923-26 6.3 122923-54 12.0 122923-773.6 122923-27 6.4 122923-55 13.6 122923-83





Disadvantages: shut height cannot be modified to process adjacent wiresizes. Off center wire condition has to be considered when choosing blade size

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

lAKES PRECISION iNC

.

KOMAX 135 MACHINE GROMMET LOADER

KOMAX 210 / 220 / 230 MACHINE SERIESSTRAIGHT EDGE CUT / STRIP BLADES

0.70 122215-1 031545 GROMMET LOADER BLADE0.80 122215-2 031349 GROMMET LOADER BLADE1.26 122215-3 ---------- GROMMET LOADER BLADE1.56 122215-4 031549 GROMMET LOADER BLADE0.55 122215-5 ---------- GROMMET LOADER BLADE0.90 122215-6 ---------- GROMMET LOADER BLADE0.30 122215-7 ---------- GROMMET LOADER BLADE0.60 122215-8 ---------- GROMMET LOADER BLADE0.50 122215-9 ---------- GROMMET LOADER BLADE0.20 122215-10 ----------

122541 ---------- KX 210 / 20 / 30 CL-A BY-M


mm SIZE ITEM NUMBER OEM # DESCRIPTION

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


KOMAX KAPPA 230TANGENT RADIUS “V” STRIP BLADES

CLASS: TA-V

2.6 123092-1 2 CONDUCTOR TA-V STRIP

mmDIA SIZE ITEM NUMBER DESCRIPTION

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

- FOR MORE INFORMATION AND ADDITIONAL SIZES,PLEASE CONTACT LAKES PRECISION, INC.

- COATED OR UNCOATED BLADES AVAILABLE -


The sharp edge is ground to an arc whose radius approximates awg wiresize. The entry angle lines meet the arc at a tangent point. This type of blade,when closed, presents a diamond shaped edge profile.

Advantages: by adjusting cutter head shut height, (if insulation materialand wall thickness allow), you can process adjacent wire extrusions.

Disadvantages: inadequate for processing thin wall and/or hard insulationssuch as cross-link or fiberglass jackets.

123092


KOMAX KAPPA 235 MACHINE SERIES3 CONDUCTOR UNIVERSAL STRIP BLADES

CLASS: UN-V

1.35 123213-4 3 COND UN-V FOR INNER STRIP OPTION2.0 123213-3 3 COND UN-V FOR INNER STRIP OPTION 2.44 123213-5 3 COND UN-V FOR INNER STRIP OPTION2.54 123213-1 3 COND UN-V FOR INNER STRIP OPTION3.0 123213-2 3 COND UN-V FOR INNER STRIP OPTION

CENTER TO CENTER ITEM NUMBER DESCRIPTION

123213-XX


The sharp edge is ground at an angle that results in a “V ” opening of exactly 90degrees.

Characteristics: 90 degree angle is widely accepted as the best entry angle touse for processing a wide range of wire sizes using the same blade setup. Most of thetime, this class of blade incorporates a sharp edge ground to a very small or non-exist-ing radius. It works sufficiently for most of standard wall insulation but is marginal forthin wall, cross-linked pvc, very rubbery insulations, woven fiber or thin-walled multi-conductors.


<--<--M A I N M E N U

OEM MENU

NEXT

MACHINE MENU

lAKES PRECISION iNC

.

KOMAX KAPPA 240UNIVERSAL CUT / STRIP BLADES

CLASS: UN-V

---- 123097 053884 UN-V CUT / STRIP3.2 123112-1 ------------ CUT / STRIP BLADE4.0 123112-5 ------------ CUT / STRIP BLADE6.0 123112-4 ------------ CUT / STRIP BLADE6.3 123112-2 ------------ CUT / STRIP BLADE8.0 123112-3 ------------ CUT / STRIP BLADE


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


123097 123112-XX

UNIVERSAL CUT-OFF BLADESThe sharp edge is ground to a radius size. The entry angle

lines meet the radius at a tangent point. This type of blade, whenclosed, presents a diamond shaped edge profile.


UN-V CUT / STRIPBLADES


KOMAX KAPPA 240 MACHINE SERIESTRU-RADIUS “V” STRIP BLADES

CLASS: TR-V

mm ITEM mm ITEM mm ITEM mm ITEM DIA SIZE NUMBER DIA SIZE NUMBER DIA SIZE NUMBER DIA SIZE NUMBER





Disadvantages: shut height cannot be modified to process adjacent wiresizes. Off center wire condition has to be considered when choosing blade size

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

1.8 123108-1.8 4.4 123108-4.4 7.0 123108-7.0 9.6 123108-9.61.9 123108-1.9 4.5 123108-4.5 7.1 123108-7.1 9.7 123108-9.72.0 123108-2.0 4.6 123108-4.6 7.2 123108-7.2 9.8 123108-9.82.1 123108-2.1 4.7 123108-4.7 7.3 123108-7.3 9.9 123108-9.92.2 123108-2.2 4.8 123108-4.8 7.4 123108-7.4 10.0 123108-10.02.3 123108-2.3 4.9 123108-4.9 7.5 123108-7.5 10.1 123108-10.12.4 123108-2.4 5.0 123108-5.0 7.6 123108-7.6 10.2 123108-10.22.5 123108-2.5 5.1 123108-5.1 7.7 123108-7.7 10.3 123108-10.32.6 123108-2.6 5.2 123108-5.2 7.8 123108-7.8 10.4 123108-10.42.7 123108-2.7 5.3 123108-5.3 7.9 123108-7.9 10.5 123108-10.52.8 123108-2.8 5.4 123108-5.4 8.0 123108-8.0 10.6 123108-10.62.9 123108-2.9 5.5 123108-5.5 8.1 123108-8.1 10.7 123108-10.73.0 123108-3.0 5.6 123108-5.6 8.2 123108-8.2 10.8 123108-10.83.1 123108-3.1 5.7 123108-5.7 8.3 123108-8.3 10.9 123108-10.93.2 123108-3.2 5.8 123108-5.8 8.4 123108-8.4 11.0 123108-11.03.3 123108-3.3 5.9 123108-5.9 8.5 123108-8.5 11.1 123108-11.13.4 123108-3.4 6.0 123108-6.0 8.6 123108-8.6 11.2 123108-11.23.5 123108-3.5 6.1 123108-6.1 8.7 123108-8.7 11.3 123108-11.33.6 123108-3.6 6.2 123108-6.2 8.8 123108-8.8 11.4 123108-11.43.7 123108-3.7 6.3 123108-6.3 8.9 123108-8.9 11.5 123108-11.53.8 123108-3.8 6.4 123108-6.4 9.0 123108-9.0 11.6 123108-11.63.9 123108-3.9 6.5 123108-6.5 9.1 123108-9.1 11.7 123108-11.74.0 123108-4.0 6.6 123108-6.6 9.2 123108-9.2 11.8 123108-11.84.1 123108-4.1 6.7 123108-6.7 9.3 123108-9.3 11.9 123108-11.94.2 123108-4.2 6.8 123108-6.8 9.4 123108-9.4 12.0 123108-12.04.3 123108-4.3 6.9 123108-6.9 9.5 123108-9.5


KOMAX BT 700 MACHINE SERIESDIE TYPE BLADES

SEND WIRE SAMPLES TO LAKES PRECISION, INC.


<--MAIN MENU

OEM MENU

MACHINE MENU

123096WIRE GUIDE

Wire guides are used in conjunction with collinear radius strip bladesto precisely guide the conductor into the strip area of the blade. This will helpprevent the conductor from coming in contact with the cutting edges of thestrip blades, preventing premature strip blade wear.

123039-XX

123096-1 1.4 DIE TYPE WIRE GUIDE

mmITEM NUMBER DIA SIZE DESCRIPTION

- For a specific blade size or application, contact Lakes Precision, Inc. -

COLLINEAR RADIUS TYPE

The sharp edge is ground to a half circle whose radius approximates awg wiresize. Shearing edge is ground to a straight edge. This type of blade, when closed toshut height,forms a perfect circle profile. Advantages: this type of blade is excellentfor precise and clean jacket removal because it exactly matches conductor gauge.Excellent for thin-wall cross-link pvc and most applications where precise jacketremoval around the conductor is required, especially with layered coverings such asfiber over plastic, plastic over shields, etc.

Disadvantages: shut height cannot be modified to process adjacent wiresizes. Off-center wire condition has to be considered when choosing blade size.

NEXT


KOMAX BT700 MACHINE SERIESWIDE ENTRY/ TANGENT ANGLE “V” BLADES

CLASS: WE-A / TA-V

0.5 123240-1 0048619 WE-A/ TA-V CUT-OFF

mm DIA SIZE ITEM NUMBER MARK DESCRIPTION


123240-XX

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

TANGENT ANGLE CUT-OFF BLADES

The sharp edge is ground to a radius size. The entry angle lines meetthe radius at a tangent point. This type of blade, when closed, presents adiamond shaped edge profile.

Characteristics: sharp edges cut by slicing, creating a gradual cut.This produces less deformation of the material being cut. Cutting edgesmust be able to by-pass each other. This type cut-off is best used with cir-cular shaped wire.


KOMAX 62 MACHINE SERIESPRE-SLITTER NOTCER BLADES

50mm-1mm 123138 0058164 PRE-SLITTER NOTCHER

5mm-1mm 123139-1 0058168 PRE-SLITTER NOTCHER




mmSIZE ITEM NUMBER OEM # DESCRIPTION

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

- FOR MORE INFORMATION ABOUT THESE BLADES, PLEASE CONTACT LAKES PRECISION, INC.


123138 123139-XX

PRE-SLITTER NOTCHERBLADES



KOMAX ARA MACHINE SERIESUNIVERSAL STRIP BLADES

CLASS: UN-V

------ 123009 ------------------ UNIVERSAL STRIP

------ 123114 BZDB55001A UNIVERSAL STRIP

123009


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

123114

UN-VSTRIP BLADES


The sharp edge is ground at an angle that results in a “V ” opening ofexactly 90 degrees.

Characteristics: 90 degree angle is widely accepted as the best entryangle to use for processing a wide range of wire sizes using the same bladesetup. Most of the time, this class of blade incorporates a sharp edge ground toa very small or non-existing radius. It works sufficiently for most of standard wallinsulation but is marginal for thin wall, cross-linked pvc, very rubbery insulations,woven fiber or thin-walled multi-conductors.


KOMAX ARA MACHINE SERIESSTRIP BLADES

0.65 122388-3 ARA STRIP BLADE




mmDIA SIZE ITEM NUMBER DESCRIPTION

<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT


122388-XX

- FOR ALTERNATIVE SIZES, PLEASE SEND WIRE SAMPLESTO LAKES PRECISION, INC.


122725 SEBA01032D SLITTING BLADE


KOMAX ARA MACHINE SERIESSLITTING BLADE & RECUT TAPE BLADE


<--MAIN MENU

OEM MENU

MACHINE MENU

NEXT

122725

- FOR MORE INFORMATION ABOUT THESE BLADES,PLEASE CONTACT LAKES PRECISION, INC.


123110 RBLB01004A CL-A RECUT TAPE BLADE

123110



Characteristics: Sharp edges cut by shearing action. This class ofblade was designed to allow multiple conductor wire to be processed withoutdeforming the wire. The main advantage of this class is the ability to processmany different wire gauges with the same blades.


KOMAX ARA MACHINE SERIESCUT-OFF BLADES

SEND WIRE SAMPLES TO LAKES PRECISION, INC.


<--MAIN MENU

OEM MENU

MACHINE MENU

122583 CRLA01005G CUT-OFF


122587 CRLA01004G-PLNFA01 CUT-OFF


CUT-OFF BLADESThe sharp edge is ground to a radius size. The entry angle

lines meet the radius at a tangent point. This type of blade, whenclosed, presents a diamond shaped edge profile.




Characteristics: Sharp edges cut by shearing action. Thisclass of blade was designed to allow multiple conductor wire to beprocessed without deforming the wire. The main advantage of thisclass is the ability to process many different wire gauges with thesame blades.

strip blades & accessories machine menu · komax lakes precision inc. strip blades &...

Documents