striking/prying - industrial bearing s is 345mm long and used for general carpentry work and nail...
TRANSCRIPT
STRI
KING
/ PR
YING
Kincrome Hammer Range
The Kincrome Hammer Range is a ‘big hit’with the trade!The 20oz (567gm) Hickory Shaft Claw Hammer is 345mm long and used for general
carpentry work and nailpulling. It is the most popular style in the hammer range, ideal forthe trade professionalsand great for the handyman.
The Leather Handle Claw Hammerrange features a 16oz (454gm),20oz (567gm) and a 24oz (680gm). These Hammers are forged one piece construction and include a genuine leather gripwith a laminated finish for durability.
The Ball Pein Hammerwith the classic Hickory Shaft is used for riveting, centre punching and bending or shaping soft metal. It comes in 8oz, 16oz, 24oz, and 32oz sizes.
Features:
• Forged from high carbon steel, hardened
and tempered, precision ground, polished
head with chamfered edges.
• American straight grained hickory handle
with rubber end cap and twin handle
wedges.
The Club Hammers are used for powerful work, such as striking masonry nails, steel chisels and masonry drills. They come in 3lband 4lb sizes, and when extra leverage is needed, the 4lb Club Hammer with a 443mm
long handle is available. Forged from high carbon steel the precision ground head haschamfered edges and is anchored, like otherhammers in the Kincrome range, to Americanstraight grained hickory handle.
The Soft Face & Dead Blow Hammerscomplete the range. The Soft Face Hammer istypically used to form sheet metal or when asofter blow is called for to minimise damage.The Dead Blow Hammer is a specialised mallet
with shot filled nylon heads to control the striking force with minimal rebound.
Centre Punch• For piercing and marking, or for preparing drill spots in metal and other materials.
Finkal Punch Range
Nail Punch• Set nails in hidden and hard to reach places, and recesses nails into timber for a smooth, flush finish.
Pin Punch• For driving out and removing already loosened pins and keys after the initial movement by a starter punch.
Hollow Punch• Create shapes in leather, wood, gaskets and other materials.
Starter Drift Punch• For loosening frozen or tight pins and knocking out rivets. • For installing and removing pins and shafts. • Also used to align holes in two or more pieces.
Cold Chisel• Used for cutting, shaping, chipping or removing metal softer than the
cutting edge of the chisel, such as stone, brick, masonry, concrete, cement, mortar and metal.
• Punches are available individually and in sets. • All punches have knurled grips for easy and sure handling.• The striking end of all Centre Punches and Nail Punches has been tempered to prevent the head from shattering
during striking.
Finkal Punches are manufactured from hardened and tempered top grade carbon alloy steel. This increases strength and durability, and reduces brittleness and tool stress.
Finkal Punches are presented in colourful cylinder packs and wallets specially designed for high impact at the point of sale!
Striking/Prying
182
9
STRI
KING
/ PR
YING
Striking/Prying 9
183
• Curved chisel end with tapered aligner. • 16” long and black finished
Knurled copper body with alloy steel spring loaded point.
Blades hardened & tempered.
Blade lengths (approximately)
200mm, 300mm, 450mm, 600mm
• Chrome Vanadium Steel with phosphate finish.• Extended cap for protection.• Go-through handles for striking.
Size
Extended Pry Bar 600mm (24”)
Elbow Bent Pry Bar 450mm (18”)
Bent Forked Pry Bar 300mm (12”)
Bent Pry Bar 200mm (8”)
Chrome Vanadium Steel with phosphate finish
Size
Extended Bent Pry Bar 450mm (18”)
Bent Pry Bar 200mm (8”)
Inner/outer 6/30
07118 Podgy Bar (Pinch Bar)
125mm (5”)ACP Automatic Centre Punch
Inner/outer 10/40
4 PieceK9050 Pry Bar Set
K090001 Pry Bar Set 4 Piece
K9051 Pry Bar Set 2 Piece
Inner/outer 8/16
Inner/outer 3/12
Inner/outer 6/24
9
184
Striking/Prying
• Forged from high carbon steel, hardened and tempered.• Precision ground, polished head with chamfered edges.• American straight grained hickory handle with rubber
end cap and twin handle wedges.
Hickory Shaft
Part No Size Inner/outer
K090005 8oz (227gm) 6/36
K090006 16oz (454gm) 6/36
K090007 24oz (680gm) 6/36
K090008 32oz (907gm) 6/36
• Forged from high carbon steel, hardened and tempered.• Precision ground, polished head with chamfered edges.• American straight grained hickory handle with rubber
end cap and twin handle wedges.
Part No Size Handle Inner/outer
K090009 3lb (1.35Kg) 265mm 6/12
K090011 4lb (1.8Kg) 275mm 6/12
Long Handle
K090012 4lb (1.8Kg) 450mm 6/12
Part No Size Length Inner/outer
K9101 20oz (567gm) 345mm 6/36
Part No Size Inner/outer
K9032 16oz (454gm) 6/36
K9033 20oz (567gm) 6/36
K9034 24oz (680gm) 6/36
• Fully polished, forged one-piece solid steel construction to eliminate loose heads
• Laminated handle, washers pressed on handle and riveted • Double lacquered finish on grip• Genuine Leather Grip provides comfort & durability • Carbon steel
• Forged from carbon steel, hardened and tempered. • Precision ground, polished head with chamfered edges.• Grained American straight grooved hickory handle.• Rubber end cap reduces slippage from the hand and
provides greater end of swing control.• The seated head and handle joint blocks moisture for
added strength and longevity.• Length 345mm
Hammers Ball Pein
Hickory ShaftClub Hammers
Hickory ShaftK9101 Claw Hammer
Leather HandleClaw Hammers
STRI
KING
/ PR
YING
Striking/Prying 9
185
• Kincrome Soft Face Hammers are generally used when a softer blow is called for than that delivered by a metal hammer
• Soft Face Hammers are typically used to form sheet metal as they generally don’t leave marks
• Available in 3 sizes: 25mm, 38mm and 50mm, in a polythene and nylon head
Features:
• Light weight aluminium die cast handle and head• Polythene and nylon replaceable heads
Part No Size Head Inner/outer
K9015 25mm Polythene 3/6
K9016 25mm Nylon 3/6
K9017 25mm Polythene/Nylon 3/6
K9018 38mm Polythene 3/6
K9019 38mm Nylon 3/6
K9020 38mm Polythene/Nylon 3/6
K9021 50mm Polythene 3/6
K9022 50mm Nylon 3/6
K9023 50mm Polythene/Nylon 3/6
• Kincrome Dead Blow Hammer is a specialised mallet used to minimise damage to the surface and in controlling the striking force with minimal rebound
Features:
• Lightweight aluminium die cast handle and head• Reinforced head• Multi purpose nylon heads
Part No Size Head Inner/outer
K9024 40mm Nylon filled with Shot 3/6
K9025 60mm Nylon filled with Shot 3/6
Part No Head Inner/outer
K9026 2 x 25mm Replacement Nylon Heads 3/6
K9027 2 x 25mm Poly Replacement Heads 3/6
K9028 2 x 38mm Replacement Nylon Heads 3/6
K9029 2 x 38mm Poly Replacement Heads 3/6
K9030 2 x 50mm Replacement Nylon Heads 3/6
K9031 2 x 50mm Poly Replacement Heads 3/6
• 27 Piece A-Z Stamps (Inc Ampersand) • 9 Piece Numeric Stamps (6 is used as 9) • 6mm (1/4") Letters and Numbers • 10mm (3/8") Square Shank• Square Carbon Steel • For Use on Metal Or Wood
Soft Face Hammers
Dead Blow Hammers
Replacement Heads for Soft Face Hammers
36 Piece
K9136 Letter and Number Stamp Set
Inner/outer 12/48
STRI
KING
/ PR
YING
9
186
Striking/Prying
1 x K9041B - Soft Face Hammer Merchandiser Board
Part No Size Head Qty
K9015 25mm Polythene 2
K9016 25mm Nylon 2
K9017 25mm Polythene/Nylon 2
K9018 38mm Polythene 2
K9019 38mm Nylon 2
K9020 38mm Polythene/Nylon 2
K9021 50mm Polythene 2
K9022 50mm Nylon 2
K9023 50mm Polythene/Nylon 2
K9024 40mm Dead Blow Hammer 2
K9025 60mm Dead Blow Hammer 2
900mm x 600mm
22 Piece
K9041 Soft Face Hammers Merchandiser
CCP2 Centre Punch Round - 1.5mm
CCP3 Centre Punch Round - 2.5mm
CCP4 Centre Punch Round - 3mm
CCP5 Centre Punch Round - 4mm
CCP6 Centre Punch Round - 5mm
CCP500 Centre Punch Round - 5mm
CGC70 Centre Punch Round - 5mm
CCP65 Centre Punch - 6.5mm
CCP8 Centre Punch - 8mm
CCP10 Centre Punch - 10mm
CCP12 Centre Punch - 12mm
CNP52 Nail Punch - 1.5mm
CNP53 Nail Punch - 2.5mm
CNP54 Nail Punch - 3mm
CNP55 Nail Punch - 4mm
CNP56 Nail Punch - 5mm
CNP200 Nail Punch - 5mm
CNP570 Nail Punch - 5mm
CSP102 Pin Punch Short - 1.8mm
CSP103 Pin Punch Short - 2.5mm
CSP104 Pin Punch Short - 3mm
CSP105 Pin Punch Short - 4mm
CSP106 Pin Punch Short - 5mm
CSP107 Pin Punch Short - 5.5mm
CSP108 Pin Punch Short - 6.5mm
CLP303 Pin Punch Long - 2.5mm
CLP304 Pin Punch Long - 3mm
CLP305 Pin Punch Long - 4mm
CLP306 Pin Punch Long - 5mm
CLP307 Pin Punch Long - 5.5mm
CLP308 Pin Punch Long - 6.5mm
CLP309 Pin Punch Long - 8mm
CLP310 Pin Punch Long - 9.5mm
CCH861 Cold Chisel - 10mm
CCH862 Cold Chisel - 12mm
CCH863 Cold Chisel - 16mm
CCH864 Cold Chisel - 19mm
CCH865 Cold Chisel - 22mm
CCH866 Cold Chisel - 25mm
CHP704 Hollow Punch - 3mm
CHP705 Hollow Punch - 4mm
CHP706 Hollow Punch - 5mm
CHP708 Hollow Punch - 6.5mm
CHP710 Hollow Punch - 8mm
CHP712 Hollow Punch - 9.5mm
CHP714 Hollow Punch - 12mm
CHP716 Hollow Punch - 13mm
CRP58 Roofing Punch Round - 8mm
CCS850 Cold Chisel Set - 5 Piece
Sizes: 12mm,16mm,19mm, 22mm, 25mm
LPS110
Combination Punch Set - 10 Piece
• 4 Centre Punches - 3, 4, 5, 6.5mm
• 4 Long Pin Punches - 3, 4, 5, 6.5mm
• 2 Starter Drift Punches - 3, 6.5mm
50 PieceF5000 Punches & Chisels Merchandiser
100 PieceF5001 Punches & Chisels Merchandiser
150 PieceF5002 Punches & Chisels Merchandiser
50 Piece
F5000T Tools Only (No Merchandiser)
Includes:• Centre Punches • Nail Punches • Short Pin Punches• Long Pin Punches • Hollow Punches • Roofing Punches• Cold Chisels • Combination Punch Set 10 Pce• Cold Chisel Set 5 Pce • Merchandiser Board & Hooks
Includes:• Centre Punches (x2) • Nail Punches (x2) • Short Pin Punches (x2)• Long Pin Punches (x2) • Hollow Punches (x2) • Roofing Punches (x2) • Cold Chisels (x2)• Combination Punch Set 10 Pce (x2)• Cold Chisel Set 5 Pce (x2) • Merchandiser Board & Hooks
Includes:• Centre Punches (x3) • Nail Punches (x3) • Short Pin Punches (x3)• Long Pin Punches (x3) • Hollow Punches (x3) • Roofing Punches (x3) • Cold Chisels (x3)• Combination Punch Set 10 Pce (x3)• Cold Chisel Set 5 Pce (x3) • Merchandiser Board & Hooks
STRI
KING
/ PR
YING
22 Piece
K9041T Tools Only (No Merchandiser)
900mm x 600mm
The range of FINKAP Striking Tools feature the unique FINKAP Safety ‘KAP’. The ‘KAP’ gives users up to 5 times greater striking surface when compared to conventional chisels and are designed to protect users against hand and wrist injuries.The yellow FINKAP handle absorbs shock andvibration and minimises the hot & cold feeling you get from cold chisels. Manufactured from Thermoplastic Rubber (TPR), the handle is non-slipwith a cushion grip and comfortable to hold.
Striking/Prying 9
187
• Tough reinforced PP (Polymer/Polypropylene) cap• Comfortable TPR (Thermoplastic Rubber) grip• Non-slip grip greatly reduces shock/vibration trauma on
hand/wrist• Striking noise is greatly reduced• 5 times greater striking surface when compared to
conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip reduces hot/cold feel• Eliminates flying chips and mushrooming of chisel heads• Chrome Vanadium, hardened and sandblasted steel
• Tough reinforced PP (Polymer/Polypropylene) cap• Comfortable TPR (Thermoplastic Rubber) grip• Non-slip grip greatly reduces shock/vibration trauma on
hand/wrist• Striking noise is greatly reduced• 5 times greater striking surface when compared to
conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip reduces hot/cold feel• Eliminates flying chips and mushrooming of chisel heads• Chrome Vanadium, hardened and sandblasted steel
Contents: 1 x 19mm (3/4”)
1 x 12mm (1/2”) 1 x 22mm (7/8”)
1 x 16mm (5/8”) 1 x 25mm (1”)
5 PieceF1010 Cold Chisels Set
F1009 Plug Chisel
F1005 Mason’s Bolster
F1007 Brick Bolster
Cold Chisels
F1006 Electrician Bolster
F1008 Brick Bolster
Inner/outer 6/24
Chisels & Bolsters
Part No Description Size Inner/outer
F1000 Cold Chisel 12mm (1/2") 6/24
F1001 Cold Chisel 16mm (5/8") 6/24
F1002 Cold Chisel 19mm (3/4") 6/24
F1003 Cold Chisel 22mm (7/8") 6/24
F1004 Cold Chisel 25mm (1") 6/24
F1005 Mason’s Bolster 50mm (2") 6/24
F1006 Electrician Bolster 60mm (2-3/8") 6/24
F1007 Brick Bolster 75mm (3") 6/24
F1008 Brick Bolster 100mm (4") 6/24
F1009 Plug Chisel 6.35mm (1/4") 6/24
• Tough reinforced PP (Polymer/Polypropylene) cap• Comfortable TPR (Thermoplastic Rubber) grip• Non-slip grip greatly reduces shock/vibration trauma on
hand/wrist• Striking noise is greatly reduced• 5 times greater striking surface when compared to
conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip • Chrome Vanadium (CrV) steel blade• Comes with sharpening stone and hone
Description Size Qty
Wood Chisel 19mm 1
Wood Chisel 25mm 1
Wood Chisel 32mm 1
Wood Chisel 38mm 1
Wood Chisel 50mm 1
Sharpening Hone 1
Sharpening Stone 1
Inner/outer 6/24 Part No Size Length Inner/outer
F1019 19mm 300mm 6/48
F1025 25mm 300mm 6/48
F1032 32mm 300mm 6/48
F1038 38mm 300mm 6/48
F1050 50mm 300mm 6/48
• Tough reinforced PP (Polymer/Polypropylene) cap• Comfortable TPR (Thermoplastic Rubber) grip• Non-slip grip greatly reduces shock/vibration trauma on
hand/wrist• Striking noise is greatly reduced• 5 times greater striking surface when compared to
conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip • Chrome Vanadium (CrV) steel blade
7 PieceF1011 Wood Chisels Set
Wood Chisels
STRI
KING
/ PR
YING
F3003 Star Maul - Wood Splitter4.5lb• Spherical striking face to provide centered & efficient
blow• Notches to prevent pop out from the log being split• Diamond shaped cross section provides splitting of the
log in 4 different directions• Sharp point for easy to start• Carbon Steel drop forged by mould
Inner/outer 8/24
9
188
Striking/Prying
Round HeadIndividual Sizes - Cylinder Pack
Part No Size Inner/outer
CCP2 1.5mm (1/16") 6/24
CCP3 2.5mm (3/32") 6/24
CCP4 3mm (1/8") 6/24
CCP5 4mm (5/32") 6/24
CCP6 5mm (3/16") 6/24
CCP500 Heavy Duty 5mm (3/16") 6/24
CGC70 Industrial 5mm (3/16") 6/24
CCP65 6.5mm (1/4") 6/24
CCP8 8mm (5/16") 6/24
CCP10 10mm (13/32") 6/24
CCP12 12mm (1/2") 6/24
4 Piece Set in WalletSizes:
1.5mm 2.5mm 3.0mm 4.0mm(1/16”) (3/32”) (1/8”) (5/32”)
10 Piece Set in WalletSizes:
4 Centre Punches: 3mm 4mm 5mm 6.5mm
(1/8”) (5/32”) (3/16”) (1/4”)
4 Long Pin Punches: 3mm 4mm 5mm 6.5mm
(1/8”) (5/32”) (3/16”) (1/4”)
2 Starter Drift Punches: 3mm 6.5mm
(1/8”) (1/4”)
5 Piece Set in WalletSizes:
Nail Punch 2.5mm (3/32”)
Centre Punch 3mm (1/8”)
Piercing Punch 5mm (3/16”)
Short Pin Punch 3mm (1/8”)
Hollow Punch 3mm (1/8”)
7 Piece Set in WalletSizes:
2 Centre Punches: 8mm 10mm
(5/16”) (13/32”)
3 Long Pin Punches: 6.5mm 8mm 9.5mm
(1/4”) (5/16”) (3/8”)
2 Starter Drift Punches: 8mm 9.5mm
(5/16”) (3/8”)
Individual Sizes - Cylinder Pack
Part No Size Inner/outer
CNP52 1.5mm (1/16") 6/24
CNP53 2.5mm (3/32") 6/24
CNP54 3mm (1/8") 6/24
CNP55 4mm (5/32") 6/24
CNP56 5mm (3/16") 6/24
CNP200 Floor Punch 5mm (3/16") 6/24
CNP570 Heavy Duty 5mm (3/16") 6/24
5 Piece Set in WalletSizes:
1.5mm 2.5mm 3.0mm 4.0mm 5.0mm
(1/16”) (3/32”) (1/8”) (5/32”) (3/16”)
Individual Sizes - PVC Pouch
Part No Size Inner/outer
CCH861 10mm (3/8") 6/24
CCH862 12mm (1/2") 6/24
CCH863 16mm (5/8") 6/24
CCH864 19mm (3/4") 6/24
CCH865 22mm (7/8") 6/24
CCH866 25mm (1") 6/24
6 Piece Cold Chisel & Punch Set in WalletSizes:
2 Cold Chisels: 16mm (5/8”) 19mm (3/4”)
1 Starter Drift: 6.5mm (1/4”)
2 Pin Punches: 3mm (1/8”) 5mm (3/16”)
1 Centre Punch: 5mm (3/16”)
5 Piece Set in WalletSizes:
12mm 16mm 19mm 22mm 25mm(1/2”) (5/8”) (3/4”) (7/8”) (1”)
3 Piece Set in WalletSizes:
12mm 19mm 25mm(1/2”) (3/4”) (1”)
Centre Punches
4 Piece, Round HeadCPS104 Centre Punch Set
Inner/outer 6/24
4 Piece Set in WalletSizes:
6.5mm 8mm 10mm 12mm(1/4”) (5/16”) (13/32”) (1/2”)
4 Piece, Round HeadCPS204 Centre Punch Set
Inner/outer 6/24
10 PieceLPS110 Combination Punch Set
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/245 PieceCS460 Combination Punch Set
7 PieceLPS107 Combination Punch Set
Round HeadNail Punches
5 Piece Round HeadNPS205 Nail Punch Set
Cold Chisels Hexagonal
3 Piece HexagonalCCS830 Cold Chisel Set
6 PiecePCS960 Cold Chisel & Punch Set
5 Piece HexagonalCCS850 Cold Chisel Set
Inner/outer 6/24
STRI
KING
/ PR
YING
Striking/Prying 9
189
Individual Sizes - Cylinder Pack
Part No Size Inner/outer
CSP102 1.8mm (1/16") 6/24
CSP103 2.5mm (3/32") 6/24
CSP104 3mm (1/8") 6/24
CSP105 4mm (5/32") 6/24
CSP106 5mm (3/16") 6/24
CSP107 5.5mm (7/32") 6/24
CSP108 6.5mm (1/4") 6/24
Individual Sizes - Cylinder Pack
Part No Size Inner/outer
CLP303 2.5mm (3/32") 6/24
CLP304 3mm (1/8") 6/24
CLP305 4mm (5/32") 6/24
CLP306 5mm (3/16") 6/24
CLP307 5.5mm (7/32") 6/24
CLP308 6.5mm (1/4") 6/24
CLP309 8mm (5/16") 6/24
CLP310 9.5mm (3/8") 6/24
7 Piece Set in WalletSizes:
1.8mm 2.5mm 3mm 4mm 5mm 5.5mm 6.5mm
(1/16”) (3/32”) (1/8”) (5/32”) (3/16”) (7/32”) (1/4”)
2.5mm 3mm 4mm 5mm 5.5mm 6.5mm 8mm 9.5mm
(3/32”) (1/8”) (5/32”) (3/16”) (7/32”) (1/4”) (5/16”) (3/8”)
8 Piece Set in WalletSizes:
1.8mm 2.5mm 3mm
(1/16”) (3/32”) (1/8”)
4mm 5mm 5.5mm 6.5mm 8mm 9.5mm
(5/32”) (3/16”) (7/32”) (1/4”) (5/16”) (3/8”)
9 Piece Set in Wallet
Sizes - Short:
Sizes - Long:
Individual Sizes - Cylinder Pack
Part No Size Inner/outer
CHP704 3mm (1/8") 6/24
CHP705 4mm (5/32") 6/24
CHP706 5mm (3/16") 6/24
CHP708 6.5mm (1/4") 6/24
CHP710 8mm (5/16") 6/24
CHP712 9.5mm (3/8") 6/24
CHP714 12mm (7/16") 6/24
CHP716 13mm (1/2") 6/24
6 Piece Set in WalletSizes:
5mm 6.5mm 8mm 9.5mm 12mm 13mm
(3/16”) (1/4”) (5/16”) (3/8”) (7/16”) (1/2”)
6 Piece Set in WalletSizes:
1.5mm 3mm 5mm 6.5mm 8mm 9.5mm
(1/16”) (1/8”) (3/16”) (1/4”) (5/16”) (3/8”)
Part No Size Inner/outer
DP902 114 x 9 x 1.5mm 6/24
DP904 133 x 10 x 3mm 6/24
DP906 153 x 12 x 5mm 6/24
DP908 164 x 13 x 6.5mm 6/24
DP910 178 x 15 x 8mm 6/24
DP912 190 x 15 x 10mm 6/24
6 Piece Set in WalletSizes:
1.5mm 3mm 5mm 6.5mm 8mm 9.5mm(1/16”) (1/8”) (3/16”) (1/4”) (5/16”) (3/8”)
Size (Round) 8.0mm (5/16")
Pin PunchesShort Series
Pin PunchesLong Series
SDP901 Starter Drift Punch Set 6 Piece
7 Piece Short SeriesSPS107 Pin Punch Set
8 Piece Long SeriesLPS108 Pin Punch Set
9 Piece Short & Long SeriesSPS109 Combination Pin Punch Set
Hollow Punches
HPS700 Hollow Punch Set 6 Piece
HPS701 Hollow Punch Set 6 Piece
Starter Drift Punches
CRP58 Roofing Punch
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
Inner/outer 6/24
STRI
KING
/ PR
YING
9
190
Striking/Prying
• Fibreglass handle & rubber grip.• Mirror polished.
• Features a semi-hard rubber head for giving little reboundwith a quality wooden handle.
• Forged Carbon Steel.• Hardened.
Part No Size Inner/outer
09012 300mm (12") 6/12
09018 450mm (18") 6/12
09024 600mm (24") 6/12
09036 900mm (36") 6/12
560gm (20oz)1751 Claw Hammer
907gm (32oz)1736 Rubber Mallet
Wrecking Bars
Inner/outer 6/24
Inner/outer 6/24
STRI
KING
/ PR
YING