Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

1TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.comMiddle East & North Africa Office: +971 4816 5800

Dimensions & Weights

Z9801PDominator Peak Pro with PICV & Strainer Drain

Z9801PF Dominator Peak Pro with PICV, Strainer Drain and FMD

Features & Benefits • Compact, pre-fabricated unit – now available with Peak Pro PICV with

a wide range of settable flows to suit all applications• All valves are subject to both a pressure test, in accordance with

BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. This provides reassurance of performance and accuracy within each valve

• Provides accurate flow rates & differential pressure control as well as flow measurement (Z9801PF), system flushing and isolation

• DZR H Body tested to 3.1X Design Working Pressure (DWP)and bronze H Body tested to 3.9 X DWP during development for design robustness and tested to EN12516-2 to comply with the Pressure Equipment Directive (PED)

• Fully assembled & factory tested unit reduces installation time, costs and specification risks

• Can be tailored to suit customer’s specification:• available with extension stems (Z9801PEXT) or without (Z9801P)• add an extra Flow Measurement device for verification of flow rates (Z9801PF & Z9801PFEXT) • Available in 400kPa & 800kPa rated variants

• On-Off, modulating or feedback actuators are available separately to match specification

Dimensional Drawings (Standard configuration shown)

PRESSURE RATING: PN16 TEMPERATURE RATING: -10 to 100°CEND CONNECTIONS: Flushing By-pass body - BSP Taper, Strainers & Tailpieces - BSP Taper

SPECIFICATION Bronze (BS EN 1982 CC491K) fan-coil valve/ terminal unit valve assembly. Preassembled to the requirements of each individual terminal unit to include a flushing by-pass with integral isolation valves, Peak Pro Pressure Independent Control Valve (PICV), with options for low flow to high flow, flow measurement device, strainer, drain and pressure test points as and where specified. Extended handles will be fitted for Chilled Water applications. On-Off or modulating actuator is required to control the PICV. Valve assembly will be labelled to include the terminal unit reference number and flow rate. Generally as Crane FS Z9801P & Z9801PF Dominator Peak Pro system with PICV.

PN16

Materials

NO. PART MATERIAL SPECIFICATION

1A Bypass H-Body DN15 Bronze BS EN 1982 (CC491K)

1BBypass H-Body DN20, DN25

DZR Brass BS EN 12165 (CW602N)

2 D299P Strainer Drain DZR Brass BS EN 12165 (CW602N)

3 D995 PICV DZR Brass BS EN 12165 (CW602N)

4 Tailpiece DZR Brass BS EN 12164 (CW602N)

5 D901/ D902 FMD DZR Brass BS EN 12164 (CW602N)

Z9801P

Z9801PF

Val

id a

s of

220

519

Dominator ®

BA

LAN

CIN

G V

ALV

ES

SIZE (DN) A (mm)

B (mm)

C (mm)

D (mm)

VALVE WEIGHT

(kg)Z9801P 15/15 184 173 76 67 2.54Z9801P 20/15 184 173 76 67 2.54Z9801P 20/20 197 178 82 77 2.91Z9801P 25/20 197 178 82 77 2.91Z9801P 25/25 248 224 89 77 4.22

Z9801PF 15/15 229 173 76 67 2.75Z9801PF 20/15 229 173 76 67 2.75Z9801PF 20/20 241 178 82 77 3.21Z9801PF 25/20 261 198 82 77 3.51Z9801PF 25/25 298 224 89 77 4.55