stow certified company scaffold couplers name of products · in pairs.bs1139. weight: 1.40kg putlog...
TRANSCRIPT
Name of products:
Double Coupler ( Pressed Type ) The materials employed are principally alloy steel and fittings which are fully tested. The Double Couplers provide a strong positive grip when connecting standards to ledgers at right angles. Robust in both design and construction, these heavy duty couplers provide maximum safety in load bearing situations. Weight: 0.93kg
A. Test for distortion - The coupler shall be capable of
supporting, without distortion, a load of 3048 kgf (6720lbf) applied to horizontal tube. B. Test for slip – The coupler connecting two tubes at
right angles, shall be capable of sustaining a load of 1270kgf (2800 lbf) applied to horizontal tube. During this test the coupler shall not rotate through an angle exceeding 10 degrees from the horizontal.
Swivel Coupler ( Pressed Type ) Designed to provide the same high levels of security and safety to diagonal bracing. The function of the swivel coupler is to connect two scaffold tubes at any angle for ledger, facade or similar bracing. Design for maximum safety in load bearing situations, they are used especially for cross-bracing. Test distortion – The coupler connecting two tubes at 45 degrees is capable of supporting a load of 1523 kgf (3360lbf). Weight:1.10kg
Double Coupler Drop Forged Type The Double Couplers connect two scaffold tubes at right angles. These are important load-bearing components. Tape.
Weight: 48.3mm / 1.30kg
Swivel Coupler ( Drop Forged Type ) The function of the swivel coupler is to connect two scaffold tubes at any angle for ledger, facade or similar bracing. These are important structural components and must be load-bearing. Weight: 48.3mm / 1.30kg
SCAFFOLDING MANUFACTURERS (TRINIDAD) LIMITED Head Office:53 Pacific Avenue Point Lisas Industrial Estate Point Lisas Trinidad. W.I. Tel(868)636 2457 Fax: (868)679 1912
Sales Office: #8 Mucurapo Road St James Port of Spain Trinidad. W.I. Tel(868)622 4588 Tel / Fax (868) 622 4588
Factory: Lot 9D IDC Estate Pointe A Pierre Plaisance Park Trinidad. W.I. Tel(868)659 1912 Tel/Fax(868.1912
Email: [email protected] Website: www.scaffmantt.com
SCAFFOLD COUPLERS
STOW Certified Company
Name of products: Meets BS1139
Sleeve Coupler Sleeve Couplers join two scaffold tubes externally end to end. A steel divider located centrally ensures equal insertion of each tube. They can be employed where tension joints are required and therefore are particularly useful for long bracing and ledger tubes. Features a full diameter central baffle plate, ensuring correct tube positioning. Meets BS1139. Weight: 1.10kg
Gravlock Girder Coupler (Beam Clamp) This is designed to connect tube to beam or girder flange. A unique patented design enabling fast and secure coupling of scaffold tube to an ‘ I ‘ Beam flange. Providing immense grip, Gravlock girder couplers comfortably exceed BS1139 slip requirements. Suitable for use in application with flange thickness of up to 45mm. It is important to note they must always be used in pairs.BS1139. Weight: 1.40kg
Putlog (single) Coupler –MK3 Featuring a one piece ‘wrap-over’ design for greater
convenience. This pressed Putlog Coupler connects
putlog and tubes to ledger tubes in the same way as
the conventional transom fitting, used to fix board
securely to a scaffold standard. BS1139.
It is not a load bearing coupler.
Weight: 0.73kg
Board Retaining Clamp A simple and very secure method of holding down scaffold boards to avoid lifting by unauthorized personal or wind. BS1139 Weight: 1.10kg
SCAFFOLDING MANUFACTURERS (TRINIDAD) LIMITED Head Office:53 Pacific Avenue Point Lisas Industrial Estate Point Lisas Trinidad. W.I. Tel(868)636 2457 Fax: (868)679 1912
Sales Office: #8 Mucurapo Road St James Port of Spain Trinidad. W.I. Tel(868)622 4588 Tel / Fax (868) 622 4588
Factory: Lot 9D IDC Estate Pointe A Pierre Plaisance Park Trinidad. W.I. Tel(868)659 1912 Tel/Fax(868.1912
Email:[email protected] Website: www.scaffmantt.com
SCAFFOLD COUPLERS
STOW Certified Company
SCAFFOLDING MANUFACTURERS (TRINIDAD) LIMITED Head Office:53 Pacific Avenue Point Lisas Industrial Estate Point Lisas Trinidad. W.I. Tel(868)636 2457 Fax: (868)679 1912
Sales Office: #8 Mucurapo Road St James Port of Spain Trinidad. W.I. Tel(868)622 4588 Tel / Fax (868) 622 4588
Factory: Lot 9D IDC Estate Pointe A Pierre Plaisance Park Trinidad. W.I. Tel(868)659 1912 Tel/Fax(868.1912
Email: [email protected] Website: www.scaffmantt.com
SCAFFOLD ACCESSORIES
PRODUCTS:
Scaffold Ladders These are fully welded components in modular lengths which provide clear unobstructed access through the scaffold. The chords are at 300mm centres and are of standard scaffold tube dimension to accept standard fittings. Any sizes are available according to the customer’s request. Available sizes in 3m, 1.52m etc
STOW Certified Company
Head and Base Jack
Developed for use in false work applications,
either as an adjustable base jack or inverted as a
head support in typical drop head applications.
The heavy duty head and base has an SWL of four
or six tones. Weight: 5.10kg
Adjustable Stirrup U-Head
whilst performing the same duties as the stirrup
head, this unit provides up to 150mm of
adjustment.
*We do not supply Doka beams or forms.
Weight: 2.49kg
Scaffold Tubes
U-Heads
Base Jacks
Ladder Access
Steel Galvanize Scaffold Tubes (BS1139)
Outside Diameter: 48.3mm
Wall Thickness: 4.0mm
Calculated Weight: 4.37kg/m
Tension Test : EN10002-1-2001 Pass / Specified in BS
EN39-2001 (S235).
Flattening Test: BS EN10233-1994 Pass / Specified in
BS EN39-2001 (S235).
Scaffold Ladders
Beams
SCAFFOLDING MANUFACTURERS (TRINIDAD) LIMITED Head Office: 53 Pacific Avenue Point Lisas Industrial Estate Point Lisas Trinidad. W.I. Tel (868)636 2457 Fax: (868)679 1912
Sales Office: #8 Mucurapo Road St James Port of Spain Trinidad. W.I. Tel (868)622 4588 Tel / Fax (868) 622 4588
Factory: Lot 9D IDC Estate Pointe - A- Pierre Plaisance Park Trinidad. W.I. Tel (868)659 1912 Tel/Fax(868.1912
Email: [email protected] Website: www.scaffmantt.com
SCAFFOLD COUPLERS
STOW Certified Company
PRESSED STEP COUPLER Meets standards BS1139: Section 1.1 1990
Slipping force: 1500
Types of usage: Temporary Access threader steps
Method for Installation: As see in the photo
below, coupler installed unto diagonal scaffolding
tube. Diagonal elevation
varies according to the
access deck or platform.
SWIVEL GRIDER COUPLER
Meets Standards BS1139: Section 1.1 1990
Slipping force:
Loading:
Types of usage: Bracing and many more applications.
Method for Installation: Bracing of Scaffolding unto
I-Beams structures.
Scaffold Tubes
Scaffold Steel Galvanize Tubes (BS1139)
Outside Diameter: 48.3mm
Wall Thickness: 4.0mm
Calculated Weight: 4.37kg/m
Tension Test : EN10002-1-2001 Pass / Specified in BS
EN39-2001 (S235).
Flattening Test: BS EN10233-1994 Pass / Specified in
BS EN39-2001 (S235).
Scaffold Ladders
Beams