stotherm date: november 2015 · - refer to stotherm ci system bulletins and specifications, sto...

IMPORTANT: Components not identified as Sto are furnished by other manufacturers and are not necessarily installed by trades who install Sto products. Refer to project specific contract documents. ATTENTION Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the building or its components. S T O C O R P . D I S C L A I M S A L L W A R R A N T I E S E X P R E S S E D O R I M P L I E D E X C E P T F O R E X P L I C I T L I M I T E D W R I T T E N W A R R A N T I E S I S S U E D T O A N D A C C E P T E D B Y B U I L D I N G O W N E R S I N A C C O R D A N C E W I T H S T O ’ S W A R R A N T Y P R O G R A M S W H I C H A R E S U B J E C T T O C H A N G E F R O M T I M E T O T I M E. For the fullest, most current information on proper application, clean-up, mixing and other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com. www.stocorp.com ® N o t e s : 1. Detail applies to Balcony Protected by Balcony Ceiling Above. 2. Underside of balcony may also be finished with Sto Finish or other Sto smooth or textured coatings. - Refer to StoTherm ci System Bulletins and Specifications, Sto Product Bulletins, Tech Hotlines, and Sto Installation and Maintenance Guides for complete information. - Refer to applicable ICC or CCMC Evaluation Reports for building code compliance information. Detail No.: 52s.42B Date: November 2015 StoTherm ® ci Balcony Ceiling/Wall StoGuard ® Transition Membrane Embedded in StoGuard ® Air and Moisture Barrier Sto Primer (Optional) Sto Finish Sto Adhesive (with Sto Mesh Embedded) Sto Base Coat StoGuard ® Air and Moisture Barrier Light Gauge Steel Stud Framing Sheathing Sto EPS Insulation Board, Back-Wrapped or Pre- Wrapped at Termination Sto Mesh Backer Rod Backer Rod and Sealant Balcony Slotted Deflection Track Skim Coat of Sto Base Coat Sto Primer Smooth StoCoat Acryl Plus

Upload: others

Post on 11-Apr-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: StoTherm Date: November 2015 · - Refer to StoTherm ci System Bulletins and Specifications, Sto Product Bulletins, Tech Hotlines, and Sto Installation and Maintenance Guides for complete

IMPORTANT: Components not identified as Sto are furnished by other manufacturers and are not necessarily installed by trades who install Sto products. Refer to project specific contract documents.

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Notes:

1. Detail applies to Balcony Protected by Balcony Ceiling Above.

2. Underside of balcony may also be finished with Sto Finish or other Sto smooth or textured coatings.

- Refer to StoTherm ci System Bulletins and Specifications, Sto Product Bulletins, Tech Hotlines, and Sto Installation and Maintenance Guides for complete information.

- Refer to applicable ICC or CCMC Evaluation Reports for building code compliance information.

Detail No.: 52s.42BDate: November 2015

StoTherm® ciBalcony Ceiling/Wall

StoGuard® Transition Membrane Embedded in StoGuard® Air and Moisture Barrier

Sto Primer (Optional)

Sto Finish

Sto Adhesive

(with Sto Mesh Embedded) Sto Base Coat

StoGuard® Air and Moisture Barrier

Light Gauge Steel Stud Framing

Sheathing

Sto EPS Insulation Board, Back-Wrapped or Pre-Wrapped at Termination