stm group profile - stm ecosystems · stm impianti - italy ‣ supplied the original sodium...
TRANSCRIPT
STM Group Presentation Experience is our Technology℠
1
Innovation is our TechnologySTM Group Mission
‣ Novel approaches to established air pollution control processes.
‣ State-of-the-art new and retrofit technologies at a significant value.
‣ Unique engineering solutions by some of the world’s most innovative engineers.
2
Original STM Bicarb mill for the first Neutrec System
International Headquarters STM Impianti - Italy
‣ Supplied the original sodium bicarbonate mill to Solvay for the first Neutrec system installed at the Reggio Emilia waste incinerator.
‣ With 35 years of air cleaning systems experience, today’s STM is regarded as the premier supplier of milling, dosing and separation system worldwide to the air pollution control industry.
3
US Headquarters for Chemical, Food, Pharma and Other Industrial Applications
STM Micron - NJ USA
‣ One of only a handful of producers of the full line of mills, weigh feeders and separators to the specialty chemicals, food, pharmaceutical, pigments, ceramics and other industrial markets.
4
Evaporative Gas Cooling and Dry Sorbent Air Pollution Control Systems
STM EcoSystems - NJ USA
‣ Dry gas scrubbing and injection systems for acid gas and heavy metals.
‣ Dry bottom evaporative gas cooling systems.
‣ Systems for all heavy industrial pyro-processing applications, including power, cement, lime, steel, primary metals processing, metals recovery, incineration, and biomass.
5
Project Management and Engineering for Air Pollution Control Systems
STM Engineering - WI USA
‣ A team of engineers, project managers and field service personnel with more than 100 years combined experience in industrial process systems engineering.
‣ Engineering capabilities cover all main project engineering functions, including mechanical, electrical, instrumentation, project management and quality control.
6
7
STM Team ApproachTaking Advantage of the Synergies of the Group
• Site surveys • Feasibility studies • Bid preparation • Technical and commercial evaluation of bids
• Basic and detail engineering
• Automation and control
• Civil calculations • Process engineering • Fluid dynamics and computational fluid dynamics (CFD)
• Noise abatement system
ENGINEERING MANUFACTURING ERECTION AFTER MARKET
• Local outsourcing • Quality control and assurance
• Expediting
• Team-up with local partners
• Find spare parts on the market
8
Some of Our CustomersAir Pollution Control OEMs and End Users
Optimal System for Each ApplicationGas Cleaning Systems
9
Combustion ProcessSystem Type and Typical Reagent
Grinding System Dosing and Injection System
Technical Grade Sodium Bicarbonate Trona Activated
Carbon
Ready to Use (Lime,
Limestone, etc.)
Sodium Bicarbonate +
Activated CarbonIndustrial and Hazardous
Waste Incineration • • • •
Biomass • • • •Cement • • •Power • • •
Water Treatment • • •Metals Recovery Furnace • • • •
Cremation • • • •General Combustion: Heavy
Fuel Oil and Natural Gas • • •
Municipal and Hospital Waste Incineration • • • •
Steel and Foundries • • • •Glass • • •
Typical Reductions Possible Using Dry ScrubbingEmissions Reductions
10
Capture Mechanism Pollutant (mg/Nm3) EmissionsFabric Filter Particulate (mg/Nm3) <1
Sodium Bicarbonate
HCl (mg/Nm3) <5
SOx (mg/Nm3) <2
NOx (mg/Nm3) N/A
HF (mg/Nm3) <4
Activated Carbon
Heavy Metals (mg/Nm3) <0.05
Dioxins/Furans (ng/Nm3) <0.05
Cadmium (mg/Nm3) <0.001
Mercury (ng/Nm3) <0.001
Dual Fluid Atomizers for Gas Cooling and Chemical InjectionSTM Atomizing Systems
11
Metering Feeders for Gas Cleaning ApplicationsSTM Dosing Systems
12
MDS AC – 50
Hammermills for Gas Cleaning ApplicationsSTM Milling Systems
13
Typical Multi-Outlet Material Distribution Installation on a Waste Incineration System
Example Installation
14
Typical Dual Weigh-feeder Installation on a Circulating Dry Scrubber System
Example Installation
15
Single Bicarmill Installation on Dry Injection SystemExample Installation
16
Dual Bicarmill Installation on Dry Injection SystemExample Installation
17
Multi-Outlet Bicarmill InstallationExample Installation
18