stl boss - led police lights, emergency & warning light … boss wip484262089.pdf · stl boss...
TRANSCRIPT
STL Boss
SUMMARY:
With independent siren tones, the STL Boss siren is ideal for Police, Fire and EMS vehicles.
Powered by 12V
Clear sound frequency
Multi-tone functionality which allows for independent siren tones to each speaker
Amplifier output power of 200-watts
Independent siren tones for easy selection
Siren tones include: Wail, Yelp, Sting, Siren, Horn, Tool, Hi-lo
Includes flat brackets for mounting amplifier
Includes microphone with 2 feet of coiled cable which extends to 6 feet
Includes 8.5 feet of cable to speakers and power
Includes 10 feet of cable from amp to faceplate
Speakers sold separately
Amplifier Dimensions: 5" L x 2.5" H x 6.5" D
Faceplate Dimensions: 5" L x 3" H x 1" D
7 day money back guarantee
2 year warranty*
*Please test all products prior to installation to ensure proper function.
*Please note: Per the limited warranty, accurate installation of STL products requires the
installer to have a good understanding of automotive electronics, procedures, and
systems. STL products are of professional grade and professional installation is highly
encouraged.
Instruction Manual:
1. Please note that the STL Boss siren will require two speakers in order to utilize its
full features. The Boss 200 will require 2x 100watt speakers; the Boss 300 will
require 2x 150watt speakers respectively.
2. The STL Boss siren will come with all cabling needed for installation and use.
3. You will have four main power cables, 2x Red (hot), 2x Black (ground).
4. You will want to connect the power cables directly to your battery for installation.
5. You will want to ensure your grounding cables are taken directly to the negative
terminal of your battery to avoid any feedback which may disrupt your STL product.
6. The harness accompanying the STL Boss siren will feature: 2x Orange (speaker), 2x
Green (speaker), 1x Yellow, and 1x Grey (Yellow and Grey for INTERNATIONAL
use only).
7. Connect your primary phone cable (longer cable) into the adaptor.
8. Connect the phone cable to its corresponding plug on the amp.
9. Connect the other end of the phone cable to your face place.
STL Boss Faceplate:
1. The STL Boss Faceplate will feature multiple tones functionality.
2. The left knob will feature, Aux (off), Wail, Yelp, Sting, Tool, and HI-Lo.
3. The switch labeled 0-3 will mimic the left knob featuring: Off, Wail, Yelp, and
Sting.
4. Volume control will be located in the top right corner.
* Havis
Bracket not included.