steps to fold te-fs3 & te-fs4 (rd0970090) to fold te-fs3_te-fs4.pdf · new invention from...
TRANSCRIPT
NEW INVENTION FROM PIHSIANGWORLD PAT.STEPS to FOLD TE-FS3 / TE-FS4
3
12 2
4
Pull up the armrest first and thenflip down as shown on both sides.
Disengage the BrakeLever for freewheeling. Pull & GoReference View after folded 1/3
Lift the holder to fold the seatdown to the frame as shown.
Holder
Quick Lever
Fold down the tiller by releasing the Quick Lever locatedat the joint base of the handle and then clamp the QuickLever to secure the tiller at the appropriate position.
Lift the yellow trigger upwardto sideward for locking thesteering and front wheels.
YellowTrigger
Front View
Power off the Main Switch.*Remark: The power switch needs to be off if the Battery Pack has a switch.
After folded
For folding the Front Wire Basket, lift up and fold thebottom side first, then fold right & left side inward, and then use hook to buckle the front side .
1
342
After folded
Stand Upright
*
D.C.No. RD0970090
STEPS to DISMANTLE FRONT & REAR FRAME ASSEMBLY of TE-FS3 / TE-FS4
Remove two Lock Pins onto the rear frame, then fold and pull the seat from the frame as shown.
Reference View of the seat removed
Lock Pin
2. Remove Lock Pins
1. Unplug the connectors of Upper Control Cables.
Reference View after frame dismantled
STEPS to REMOVE THE SEAT of TE-FS3 / TE-FS4
NEW INVENTION FROM PIHSIANGWORLD PAT.
2/3
Can be sat as shown
Reverse the steps to mantle the frames.
D.C.No. RD0970090
NEW INVENTION FROM PIHSIANG
3/3
ON-BOARD CHARGING for TE-FS3 / TE-FS4
Note: 1. Charge the battery pack daily after use. 2. Must use the factory approved and specified charger.
OFF-BOARD CHARGING for TE-FS3 / TE-FS4
Turn off the power switch if the unit equipped withthe LiFePO4 battery pack.
Zoom View
Turn the key to horizontal position and depress the key torelease the lock and then remove the battery pack simultaneously.
Pull the handle out toremove the battery pack
WORLD PAT.
D.C.No. RD0970090