steps for variant configuration and pricing ss

7/30/2019 Steps for Variant Configuration and Pricing Ss

http://slidepdf.com/reader/full/steps-for-variant-configuration-and-pricing-ss 1/11

Steps for Variant Configuration and Pricing

I want to configure motorcycle having different types of color, each color have

verity of slandered feature as wall as different CC. while want to create sales order I

want motorcycle with specific color, Cc feature. Which is not possible while creating

BOM it will only be configure by materiel Variant Configuration.-------------------------------------Here are the Steps for Variant Configuration

1. Create a Material of your Motor Cycle using Material type KMAT (MM01).

2.Then create a characteristic called ZColour(SAP has a standard Characteristic for this but it has multiple values-i.e you can select more than one color for your Bike.If you donot want that create your own)with character format and assign single value radio buttonon the initial screen. Go to values Tab and give the colours you need. Save thecharacteristic. Similarly repeat for CC (I figure this CC as 100cc & 200cc kind of thing.

If you want these as materials then it is a different story-I am taking this as feature aswell)

3. Create a class called Zbike with the above 2 characteristics.save the class

4. Create a configuration profile Zbikeprof using Cu41 and assign the Kmat material toClass Zbike,

5. Then create the order and enter the Kmat material you want in the Order.

STEP 1: CREATE CONFIGURABLE MATERIAL – KMATT-Code –MM01

CONFIGURABLE MATL: 26000061 – MOTOR CYCLE

of 11



STEP 2: CREATE CHARACTERISTICS

T-code-CT04

STEP 3: CREATE CLASS: ZBIKE AND ASSIGN CHARACTERISTICS TOVARAINT CLASS 300

T-CODE-CL02

STEP 3: CREATE CONFIGURATION PROFILE FOR KMAT MATL AND

ASSIGN KMAT MATL TO VALRIANT CLASS

T-CODE –CU41

of 11

Create Char COLOR with values – RED, BLUE ETC

Assign above char to class ZBIKE



GOTO PROFILE DETAIL:

Configuration profile for material 26000061 created

of 11

SELECT ANDGOTO PROFILEDETAIL

Confign Initialscreen

Select SalesOrder & Bomapplication



STEP 4: CREATE SALES ORDER

ENTER MATL NUMBER, YOU GET CONFIG SCREEN

MAINTAIN VARIANT PRICE VA00

of 11

ENTER

VALUES



Standard Order 1120 2503020047 has been saved

======== =============== ============ =====================++++++++ ========= ++++++ +++++++++++ ============ +++++++++++========== ========== ============ =========== ============

Here my question is with out creating the materials is it possible to get price based on thecharacteristics.

I am working on variant configuration here my product is 9-100. I have created

characteristics for describing colours. These characteristics assigned to class, this class isassigned to 9-100(KMAT type). Here I have not created material to describe each color.

Now how I need to setup my system to calculate the price based on color.

Ugamesh.

-------------------------------------A cool Question. It will really get us into the thick of things in Variant Configuration.

Here are the steps.

T-CODE-CT04

1. Create a Characteristic called ZColour (Standard SAP has a characteristic calledcolour.I did not use it.)

Give your values.Say, Red & Blue

of 11



2. Now create another characteristic called ZCol_surcharge

T-CODE-CT04Give the description and go directly to Addnl Data Tab. Here in the table name Enter "SDCOM" and in the Field Name Enter "VKOND".The system will pick up the format

from the Dictionary.

3. Now go to CT04 and change the Characteristic Zcolour.Go to values tab and select RED.Goto Extras-> Object Dependencies->Editor and thenselect Procedure.

In front of 000010 Enter $self.ZCol_surcharge='RED'.Similarly Select Blue and enter $self.ZCol_surcharge='BLUE'

3. Link both these characteristics to the Class (The class which you have attached theKMAT Material).

4. Go to VK11 and the Enter VA00.Then give the values RED and BLUE and enter thevalues.

5. Go to your order and enter your material.

John Devraj.

STEP 1 : CREATE CHAR : ZCOLOR (CT04)

STEP 2 : CREATE CHAR : ZCOLOR_SURCHARGE (CT04)

(SIMILARLY CREATE CHAR ZCC_SURCHARGE with SDCOM / VKOND in addlvalue tab).

of 11

SDCOMVKOND

In addl value

tab



STEP 3: CREATE DEPENDENCY : (CU01)

STEP 4: LINK CHARACTERISTICS TO CLASS (ZBIKE – VARIANT CLASS –

300), CLASS WHICH IS ATTACHED TO KMAT MATERIAL: (CL02)

of 11

SelectProcedure



STEP 5: GOTO VK11, ENTER CONDITION TYPE: VA00

CREATE NEW CONDITION TYPE ZVA0 FOR CHARACTERISTIC ZCC by

copying VA00.

Include this new pricing condition in your pricing procedure:

of 11

V/06



NOW FOR ANOTHER CHARACTERISTIC – ZCC , MAINTAIN PRICING

CONDITION AT VK11

STEP 6 : CREATE SALES ORDER :

THIS TIME YOU GET ADDITIONAL CHARACTERISTIC ‘VARIANTCONDITION’- WHEN YOU ENTER CHAR –‘RED COLOR’, YOU GET VARIANTCONDITION AS ‘RED’ (THIS VALUE IS SET BY PROCEDURE).

of 11



of 11



Standard Order 1120 2503020051 has been saved

of 11

steps for variant configuration and pricing ss

Documents