step by step tutorial nmm by magie - d cloughdclough.org/hom/pdf/tuts/painting_nmm_wamp.pdfhome...
TRANSCRIPT
Home Tutorials Step by step tutorial NMM by MaGie
Create Article Go
Step by step tutorial NMM by MaGie
Hi everyone,
In this step by step, I want to show you how I usually paint steel NMM. I've triedmaking a picture in between each step, but sometimes hardly anything can be seenon a picture, so those pics are left out.
For this tutorial I painted the halberd staff of the high elf lord Caradryan.
Before I start working with paint, I like to make a simple sketch in which I block inthe shades. After drawing the sketch I slightly squish my eyes and look if theshading/highlighting could look realistic.
For painting metal, I use the following paints:
Log OutSettingsMy ProfileNotificationsWelcome, sippog
Forum Minipainting Wiki Blogs What's New? Portal
GalleryWamp Miniature News Tutorials
Tradepost
Advanced Search
by Published on 22-01-2012 07:58 PM Updated on 24-01-2012 Number ofViews: 291
6 Comments
TweetTweet 0Like
MaGie
Navigation
Miniature News
Wamp Announcements
Portal
Wamp Contests
Reviews
Tutorials
The Hotseat
Tradepost
Using Wamp
Wamp Clothing
Home
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
1 of 9 28/03/2012 00:42
At the strong shades I use black (1 in picture below). For the extreme highlights Iuse pure white (13). The middle colours consist of a slightly blue-ish grey (FrenchMirage Blue by Vallejo)(5) and a grey off-white colour (Pale Grey by Vallejo)(9).On my wet pallette I create mixtures between the colours. This step is the same forall colours, but I describe it only for shades 1 to 5.
Shade 1: pure blackShade 5: French Mirage blueShade 3: is made by mixing colour 1 and colour 5 in a 1:1 ratioShade 2: is made by mixing colour 1 and colour 3 in a 1:1 ratioShade 4: is made by mixing colour 3 and colour 5 in a 1:1 ratio
All the mixed colours are then diluted to 1 part paint, 2 parts water.
Now it's time to start painting. The mini is primed in white.
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
2 of 9 28/03/2012 00:42
Step 1: Paint the whole area in colour 7Step 2: Start by shading the areas with colour 6 and then, in a smaller area colour5. With each darker shade, you should paint a smaller area within the alreadyshaded part. Try to 'push' the paint towards the direction of the darkest shade. Usethis method with every step.
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
3 of 9 28/03/2012 00:42
Step 3: Shade with colour 4Step 4: Shade with colour 3 and then 2.
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
4 of 9 28/03/2012 00:42
Step 5: Shade only the smallest area with colour 1, black.Step 6: In this step I made the shaded are a bit larger, mainly by adding largerareas of colour 5.
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
5 of 9 28/03/2012 00:42
Step 7: Go back to the basecolour (colour 7), try to blend the lightest shades withthis colour.Step 8: Start by highlighting by applying colour 8 in the same manner as youpainted the shades (with decreasing the painted area and by pushing the painttowards the highlights)
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
6 of 9 28/03/2012 00:42
Step 9 (no picture): Highlight with colour 9Step 10: Highlight with colour 11Step 11: Highlight with colour 13, pure white.
As you can see, I did not use colour 10 and 12, because there is not so muchdifference in brightness I don't think it is necessary to use those.
Step 12: Carefully clean up the transitions between the colours. You can make thisstep a bit easier by diluting the paint a bit more. When using very dilute paint, becareful to wipe your brush before applying the paint to the model, you don't wantthe paint to run. Additionally, add a thin line of pure white to the sharp edges on topof the halberd. Applying this with the side of the brush will make it much easier tocontrol.
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
7 of 9 28/03/2012 00:42
Step 13, last step: Make a glaze of Liche Purple (GW), 1 part paint, 5 parts water.Carefully apply this to the darkest shades, for adding a bit of colour. Make the lastclean-ups and the NMM is done!
I hope you enjoyed this step by step. I'm hoping to write some more in the nearfuture, so if you have any suggestions or comments feel free to share them.Categories: Painting Tags : metallic, nmm, tutorial
6 Comments
Ulfgrimr - 23-01-2012, 08:57 AM
Great tutorial MaGie and really nice to see all the step by stepphotos. Really like the idea of sketching the tones out beforehand.
Reply
Vern - 23-01-2012, 04:34 PM
Nice tut, I agree, like the step by step photos
Reply
Darklord - 24-01-2012, 12:52 PM
excellent tutorial I Shall be giving this a go
Reply
Lyn - 24-01-2012, 02:18 PM
I like the idea about sketching first. I just wish I was able to drawlol
Reply
Bloodhowl - 05-02-2012, 06:12 PM
Very nice and easy to follow! I've been meaning to try NMM andthis has given me a nice simple set of instructions to follow!
Reply
Tarty - 14-02-2012, 10:13 PM
Fantasic tutorial, thanks for sharing.....will have to give it a shot .Something simple to start with I think.
Reply
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
8 of 9 28/03/2012 00:42
[More]
Leave Comment
Add Comment
-- BP-Brown Corporate Contact Us Wamp Archive Top
All times are GMT +1. The time now is 12:39 AM.
Powered by vBulletin® Version 4.1.5Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.
Forum Modifications By Marco Mamdouh
vBulletin Skins by Bluepearl Skins
Wamp - Tutorial NMM http://www.wamp-forum.com/content.php?815-Tutorial-NMM
9 of 9 28/03/2012 00:42