step by step installation guide - fitting guttering to a...

2
4 Fix a fascia bracket at the furthest point from the outlet. 4 Use a string line between the bracket and the outlet to determine a straight line (if fitting to a fall, 1:350 is recommended). 4 Fix wooden blocks for fascia and union brackets at required intervals. 1 4 Establish the position of the running outlet and fix the wooden block to the shed. (Wooden blocks are angled dependant on the pitch of your shed roof). 4 Fascia Brackets should be spaced at a maximum of 500mm apart on straight gutter runs. 4 All brackets should be secured with one 25mm x 4mm (1” x 8) screw. 4 Unions should be fixed using a 25mm x 4mm (1” x 8) screw. 4 Outlets and Angles should be fixed using one 25mm x 4mm (1” x 8) screw. 4 Angles and Stopends should have a Fascia Bracket suitably spaced to support them. 4 Lubricate all gutter seals. 2 3 4 5 6 Step by Step Installation Guide - Fitting Guttering to a Shed PVC-UE Roofline, Window & Cladding Systems Rainwater Systems Soil & Waste Systems Underground Drainage Systems MDPE Systems Hot & Cold Plumbing Systems

Upload: others

Post on 05-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Step by Step Installation Guide - Fitting Guttering to a Shedfloplast.co.uk/wp-content/uploads/2018/01/Guttering_on_Shed... · to next gutter length in order to build up a gutter

4 Fix a fascia bracket at the furthest point from the outlet.

4 Use a string line between the bracket and the outlet to determine a straight line (if fitting to a fall, 1:350 is recommended).

4 Fix wooden blocks for fascia and union brackets at required intervals.

1

4 Establish the position of the running outlet and fix the wooden block to the shed. (Wooden blocks are angled dependant on the pitch of your shed roof).

4 Fascia Brackets should be spaced at a maximum of 500mm apart on straight gutter runs.

4 All brackets should be secured with one 25mm x 4mm (1” x 8) screw.

4 Unions should be fixed using a 25mm x 4mm (1” x 8) screw.

4 Outlets and Angles should be fixed using one 25mm x 4mm (1” x 8) screw.

4 Angles and Stopends should have a Fascia Bracket suitably spaced to support them.

4 Lubricate all gutter seals.

2 3

4 5 6

Step by Step Installation Guide - Fitting Guttering to a Shed

PVC-UE Roofline, Window & Cladding Systems

Rainwater Systems

Soil & Waste Systems

Underground Drainage Systems

MDPE Systems

Hot & Cold Plumbing Systems

Page 2: Step by Step Installation Guide - Fitting Guttering to a Shedfloplast.co.uk/wp-content/uploads/2018/01/Guttering_on_Shed... · to next gutter length in order to build up a gutter

4 Use a Union Bracket or Angle to join to next gutter length in order to build up a gutter run. Use a Stopend to complete the run.

4 Downpipe installation starts at the outlet. If an offset is required use two Offset Bends with or without a short piece of pipe.

7

4 Working from the Running Outlet insert the back edge of the gutter under the retaining clip.

4 Using slight downward pressure on the gutter snap the front edge of the retaining clip over the front of the gutter. (Ensure that the marked expansion allowance is kept).

4 Support downpipes below offset and at maximum intervals of 1 metre.

4 A supporting Pipe Clip should be used on Shoes, Bends and Connectors, where necessary.

4 Rainwater downpipe clips should be fixed using one 25mm x 4mm (1“ x 8) screw.

8 9

10 11

Step by Step Installation Guide - Fitting Guttering to a Shed

RECOMMENDED: Use lubricant on all gutter seals

for ease of fitting and for improved performance.

For additional installation advise, please check our website:

www.floplast.co.uk

PVC-UE Roofline, Window & Cladding Systems

Rainwater Systems

Soil & Waste Systems

Underground Drainage Systems

MDPE Systems

Hot & Cold Plumbing Systems