Steel Threaded BungsThese weld in bungs are made of solid round stock and drilled and threaded to your specified SAE thread. Bungs come in a few different length

and diameter options depending on thread size. Great for all your fabrication mounting needs.

Part # Thread Pitch Length O.D. Threaded Price Each

TB14C4 1/4" X 20 .400" 5/8" Through $3.00

TB14C75 1/4" X 20 .75" 5/8" Through $3.00

TB14C12 1/4" X 20 1.25" 5/8" Blind $3.25

TB516C4 5/16" X 18 .400" 3/4" Through $3.00

TB516C75 5/16" X 18 .75" 3/4" Through $3.00

TB516C12 5/16" X 18 1.25" 3/4" Blind $3.25

TB38C5 3/8" X 16 .500" 3/4" Through $3.00

TB38C1 3/8" X 16 1.0" 3/4" Through $3.00

TB38C15 3/8" X 16 1.5" 3/4" Blind $3.25

TB38C3 3/8" X 16 3.0" 3/4" Blind $4.00

TB12C1 1/2" X 13 1.0" 7/8" Through $5.00

TB12C2 1/2" X 13 2.0" 7/8" Blind $5.65

Steel Threaded BulletsThese weld on threaded bullet bungs are made of solid cold rolled steel and drilled and tapped to your thread choice. These are blind bungs

(hole does not go all the way through) and are rounded with a full radius at opposite end.

Part# Thread Size Length O.D. Price Each

RTB14C1 1/4" X 20 1.0" 3/4" $3.50

RTB14C15 1/4" X 20 1.5" 3/4" $3.75

RTB516C1 5/16" X 18 1.0" 3/4" $3.50

RTB516C15 5/16" X 18 1.5" 3/4" $3.75

RTB38C1 3/8" X 16 1.0" 3/4" $3.50

RTB38C15 3/8" X 16 1.5" 3/4" $3.75

RTB12C3 1/2" x 13 3.0" 7/8" $8.00

Pointed Threaded BulletsThese are a little different version of our ever popular threaded bullet, the pointed profile is to resemble a true bullet. These, like our others,

make a great looking mount for just about anything.

Part # Thread Size Length O.D. Price Each

PTB14C15 1/4" X 20 1.5" 3/4" $4.25

PTB516C15 5/16" X 18 1.5" 3.4" $4.25

PTH38C15 3/8" X 16 1.5" 3/4" $4.25

Counter Bored BungsThese weld on counter bored bungs are drilled through and counter bored to accept socket head cap screws, AKA Allen bolts,

flush with the top of the bung.

Part# Bolt Size Length O.D. Price Each

CBB1475 1/4" .75" 5/8" $3.00

CBB1412 1/4" 1.25" 5/8" $3.25

CBB51675 5/16" .75" 3/4" $3.00

CBB51612 5/16" 1.25" 3/4" $3.25

CBB3875 3/8" .75" 3/4" $3.00

CBB3812 3/8" 1.25" 3/4" $3.25

CBB7161 7/16" 1.0" 7/8" $4.00

CBB71615 7/16" 1.5" 7/8" $4.50

Standard NPT BungsMade from solid stock, drilled and tapped to accept male npt fittings

Part # Npt Size Length O.D. Material Price Each

NPT186 1/8" .650" 5/8" Steel $3.00

NPT186al 1/8" .650" 3/4" Aluminum $3.75

NPT186ss 1/8" .650" 5/8" Stainless Steel $3.75

NPT147 1/4" .750" 3/4" Steel $3.75

NPT147al 1/4" .750" 3/4" Aluminum $4.75

NPT147ss 1/4" .750" 3/4" Stainless Steel $4.75

NPT381 3/8" 1.0" 7/8" Steel $4.50

NPT381al 3/8" 1.0" 1" Aluminum $5.50

NPT381ss 3/8" 1.0" 7/8" Stainless Steel $5.50

NPT382 3/8" 2.0" 7/8" Steel $5.50

Stepped/Flanged NPT bungsMade from solid mild steel drilled and tapped to accept male NPT fittings, have a larger diameter .200" thick flange machined into them

to stand off the outer surface of your fluid container. The larger weld surface allows more strength, and a smaller hole to drill.

Part # NPT size Flange Dia. Stepped Dia. Length Price Each

SNPT18 1/8 NPT 3/4" 1/2" 1/2" $4.25

SNPT14 1/4 NPT 7/8" 5/8" 1/2" $4.25

SNPT38 3/8 NPT 1" 13/16" .600" $4.75

Coped Threaded BungsThese bungs are made from solid mild steel. One end is coped to fit over a specified tube diameter and the other is drilled

and tapped accept the specified hardware.

Part # Thread Size Cope Dia Stand Off Height Outer Dia. Price Each

SCTB1516C5 5/16 X 18 1" .5" 3/4" $5.25

SCTB1516C1 5/16 X 18 1" 1" 3/4" $5.25

SCTB1516C15 5/16 X 18 1" 1.5" 3/4" $5.25

SCTB12516C5 5/16 X 18 1.25" .5" 3/4" $5.25

SCTB12516C1 5/16 X 18 1.25" 1" 3/4" $5.25

SCTB12516C15 5/16 X 18 1.25" 1.5" 3/4" $5.25

SCTB15516C5 5/16 X 18 1.625" .5" 3/4" $5.25

SCTB15516C1 5/16 X 18 1.625" 1" 3/4" $5.25

SCTB15516C15 5/16 X 18 1.625" 1.5" 3/4" $5.25

SCTB138C5 3/8 X 16 1" .5" 3/4" $5.25

SCTB138C1 3/8 X 16 1" 1" 3/4" $5.25

SCTB138C15 3/8 X 16 1" 1.5" 3/4" $5.25

SCTB1238C5 3/8 X 16 1.25" .5" 3/4" $5.25

SCTB1238C1 3/8 X 16 1.25" 1" 3/4" $5.25

SCTB1238C15 3/8 X 16 1.25" 1.5" 3/4" $5.25

SCTB1538C5 3/8 X 16 1.625" .5" 3/4" $5.25

SCTB1538C1 3/8 X 16 1.625" 1" 3/4" $5.25

SCTB1538C15 3/8 X 16 1.625" 1.25" 3/4" $5.25

CTB138C5 3/8 X 16 1" .5" 1" $6.75

CTB138C1 3/8 X 16 1" 1" 1" $7.00

CTB138C15 3/8 X 16 1" 1.5" 1" $7.25

CTB1238C5 3/8 X 16 1.25" .5" 1" $6.75

CTB1238C1 3/8 X 16 1.25" 1" 1" $7.00

CTB1238C15 3/8 X 16 1.25" 1.5" 1" $7.25

CTB1538C5 3/8 X 16 1.625" .5" 1" $6.75

CTB1538C1 3/8 X 16 1.625" 1" 1" $7.00

CTB1538C15 3/8 X 16 1.625" 1.5" 1" $7.25

CWIRS1 1/2 X 13 1" 1" 1" $7.50

CWIRS12 1/2 X 13 1.250" 1" 1" $7.50

Blind Tank BungsBungs that are threaded blind, not all the way through, make great weld in mounts for fluid containers and many other needs.

Part# Material Thread Pitch O.D. Length Price Each

BTB14C12 Steel 1/4 x 20 5/8" 1.25" $3.25

BTB516C12 Steel 5/16 x 18 3/4" 1.25" $3.25

BTB516C12AL Aluminum 5/16 x 18 3/4" 1.25" $4.00

BTB516C12SS Stainless 5/16 x 18 3/4" 1.25" $4.00

BTB38C15 Steel 3/8 x 16 3/4" 1.50" $3.25

BTB38C15AL Aluminum 3/8 x 16 7/8" 1.25" $4.00

BTB38C15SS Stainless 3/8 x 16 3/4" 1.25" $4.00

Stepped Blind Tank BungThese bungs are made from solid steel, threaded blind to the specified thread pitch, and contain a flange .200 high with a 7/8" OD

and a stepped down dia of 5/8". They make a great mount for any fluid container.

Part # Thread pitch Length Flange Dia Stepped Dia Price Each

SBTB14C 1/4" X 20 1" 7/8" 5/8" $4.25

SBTB516C 5/16" X 18 1" 7/8" 5/8" $4.25

SBTB38C 3/8" X 16 1" 7/8" 5/8" $4.25

Stepped Through BungsThese bungs are threaded through and contain a .200 thick flange on top.

Part # Thread Pitch Flange Dia Stepped Dia Length Price Each

SSTB14C 1/4" X 20 3/4" 1/2" 1/2" $4.25

SSTB516C 5/16" X 18 3/4" 1/2" 1/2" $4.25

SSTB38C 3/8" X 16 3/4" 1/2" 1/2" $4.25

MSTB516C 5/16" X 18 7/8" 5/8" 1/2" $4.25

MSTB38C 3/8" X 16 7/8" 5/8" 1/2" $4.25

Seat Spring PerchesThese are made of mild steel, coped at one end, and contain a 3/8 dia pin at the other. This pin locates the lower

section of the spring on your sprung solo seat.

Part # Cope dia Price per pair

ssp1 1" $19.50

ssp12 1.25" $19.50

Seat Pan BungsThese bungs have a large diameter to help spread the weight over a larger dia of the pan, made very short to keep your seat riding low.

Part# Thread Pitch O.D. Thickness Price Each

spb516c 5/16" x 18 1" .400" $4.25

spb38c 3/8" x 16 1" .400" $4.25

Tapered Seat Pan BungThese bungs are drilled and threaded at one end and cut at a 20 degree tapper at the other to allow better alignment of the seat spring when

the upper mount on your seat pan is toward the rear bent section of the pan.

Part# Thread pitch O.D. Price Per pair

TSPB516C 5/16 X 18 1" $14.50

TSPB38C 3/8" X 16 1" $14.50

Sprung Seat Front PivotsOur front pivot contains stainless shoulder bolts for a snug fit and bronze oilite bushings for trouble free operation. When used

properly these pivots remove most side to side play found in some sprung seats. This is a weld on kit.

2-Waterjet cut weld on mounting tabs

2-stainless shoulder bolts

2-oilite bushings installed in tabs

selective shims for adjustable preload

1.25 long, .750 OD weld on bung

1.75" overall width

Part # Price Per Kit

SSFP $27.00

Handlebar Weld in Riser SpudsThese bungs are drilled and threaded to accept 1/2" hardware. They are meant to be inserted into .120 wall tubing in either 1"

or 1.25" dia. and welded inside the tubing.

Part # Thread Pitch O.D. Length Price Per Pair

WIRS75 1/2" X 13 3/4" 1.5" $12.00

WIRS1 1/2" X 13 1" 1.5" $14.00

Coped Weld on Riser SpudsThese bungs are coped at one end to your desired diameter and drilled and threaded to accept your handle bar riser bolts.

Part # Thread Pitch Cope Dia O.D. Standoff Height Material Price per pair

CWIRS78 1/2" X 13 7/8" 7/8" 1" Mild Steel $14.00

CWIRS1 1/2" X 13 1" 1" 1" Mild Steel $15.00

CWIRS12 1/2" X 13 1.25" 1" 1" Mild Steel $15.00

CWIRS1SS 1/2" X 13 1" 1" 1" Stainless $22.50

CWIRS12SS 1/2" X 13 1.25" 1" 1" Stainless $22.50

Weld on Pivots BushingsThese bushings contain a mild steel ring with a high temp oilite bushing installed in them. This allows for years of trouble free pivoting

great for making your own foot and hand controls.

Part# Hole Dia O.D. Length Price Each

SWOPB 3/8" 7/8" 3/4" $5.50

LWOPB 1/2" 1" 1" $6.50

Petcock BungsThese bungs will work as factory replacement or in use in custom applications, 3/8 npt for early applications and the 22mm for the late style.

Part # Thread type Overall length O.D. Price Each

NPT381 3/8 NPT 1" 7/8" $4.50

NPT382 3/8 NPT 2" 7/8" $5.50

PKB22F 22MM .5" 1 1/8" $9.00

PKB222 22MM 2" 1" $17.50

Filler Caps and Weld In Bungs

Great for all of your fluid container needs, these come in a variety of materials so check the chart accordingly.

Part # Cap Material Bung Material Vented/Non Vented Cap Dia Price per kit

FCB Aluminum Mild Steel Non 1.5" $20.00

FCBAL Aluminum Aluminum Non 1.5" $23.00

FCBSS Aluminum Stainless Non 1.5" $23.00

VFCB Aluminum Mild Steel Vented 1.5" $25.50

VFCBAL Aluminum Aluminum Vented 1.5" $28.50

VFCBSS Aluminum Stainless Vented 1.5" $28.50

BVFCB Brass Mild Steel Vented 1.625" $47.00

BVFCBAL Brass Aluminum Vented 1.625" $50.00

BVFCBSS Brass Stainless Vented 1.625" $50.00

Oil Tank Bung KitThis kit includes all threaded fittings needed for proper function of an oil tank. This kit contains three 1/8 NPT fittings for your oil lines

(feed, vent, and return). It also contains a threaded filler cap and bung. All weld in parts are available in Mild Steel, 6061-t6 Aluminum,

or 304 Stainless Steel with an aluminum screw in cap.

Part # Bung Material Price Per Kit

OTBK STEEL $30.00

OTBKAL ALUMINUM $33.00

OTBKSS STAINLESS $33.00

Pipe Bomb Oil Tank KitAll the parts you need to fabricate your own custom oil tank for your custom motorcycle, this is a weld together kit for those who don't

mind doing a little welding and grinding themselves and saving some money in the process. The tank holds 3 quarts with room for air

for oil expansion.

• one 8" long section of 5" dia, 14ga mild steel tubing

• two 5" dia 14ga steel domes 2.5" tall

•one oil filler cap and bung

• three 1/8npt bungs

Part # Diameter Price Per Kit

PBOTK5 5" $68.00

PBOTK6 6" $75.00

F' Bomb Oil Tank KitThis is a flat side version of our ever popular Pipe Bomb Oil Tank Kit. This tank also holds over 3 quarts of oil and contains all the fittings

you need to make your own oil tank. This kit is available in either flat sides or flanged ones. Both are 5" in Dia.

• one 10" long section of 5" dia, 14ga mild steel tubing

• two 5" dia 14ga steel end caps

•one oil filler cap and bung

• three 1/8npt bungs

Part # Diameter End cap Style Price per kit

FBOTK 5" Flat $55.00

FLFBOTK 5" Flanged $62.50

Oil Tank End CapsThese caps are for those wanting to make their own round oil tank but do not need one of our complete kits. The end caps come in three

different styles and two diameters. The domed end cap's height is half of their diameter.

Part# Diameter Style Thickness Price Per Cap

DOME5 5" Domed 14GA $9.50

DOME6 6" Domed 14GA $11.25

FEC5 5" Flat 14GA $4.00

FEC6 6" Flat 14GA $5.00

FLEC5 5" Flanged 16GA $6.00

FLEC6 6" Flanged 16GA $7.50

Oil Tank TubingWe offer our oil tank tubing cut to your specified length, both sizes are made from 14ga mild steel. All tube is sold by the inch.

Part # Diameter Price Per Inch

OTT5 5" $2.35

OTT6 6" $2.75

Knurled Foot PegsThese are our universal Knurled foot pegs. They are made from 1" dia solid brass or aluminum and are drilled and tapped to fit 3/8 x 16

hardware on one end and domed at the other . Can be used with our pivots for that extra clean look.

1" Dia

4.5" long

Tapped to 3/8 x 16

Part # Material Price per set

KAFB Aluminum $60.00

KBFP Brass $80.00

Knurled Shifter PegMade from solid brass or aluminum, one end is tapped to accept 5/16 x 24 hardware and domed at the other.

3/4" Dia

2.5" long

Tapped to 5/16 x 24

Part # Material Price Each

KASP Aluminum $17.50

KBSP Brass $22.50

Knurled Jockey Shift HandleMade from solid brass or aluminum, one end is tapped to accept 3/8 x 16 hardware and domed at the other.

Makes for a great shifter handle or passenger peg.

1" Dia.

3.5" Long

Tapped to 3/8 x 16

Part # Material Price Each

KAJSH Aluminum $22.50

KBJSH Brass $27.50

Universal Foot Peg PivotsThese work well when making up your own controls or adapting a custom set. Tapped at either end for 3/8 x 16 hardware,

a pressed in 3/8 pin, and polished for clean looks. Made from stainless steel.

Part# Price per Pair

PMPP $50.00

Rear Master Cylinder Universal MountUsed to mount Wagner style master cylinder to the front of a four speed transmission when making custom forward controls.

Made from 1/4" Mild steel

Water jet Cut

Part # Price Each

RMCM $10.50

Stainless Shifter LinkagesThese shifter links are made with a custom threaded stainless rod and come with all stainless hardware. All heims are industrial

strength for long trouble free operation and good looks.

5/16" Dia center stainless rod

Stainless mounting hardware and jam nuts

Heims load rated to 2100 LBS

Custom Lengths available

Part # Eye to Eye Min Price per kit

SSLMCL 4.0" $45.00

SSLMCE 5.5" $45.00

SSLBGR 11.75" $49.00

Heim JointsCan be used for making your own linkage or to update a factory link to stronger joints. Available in either stainless or chrome plated chrome-moly.

Female 5/16 x 24 thread

5/16" dia eyelet

Part # Material Price Each

SSHJ516 Stainless $10.50

CMHJ516 Chrome-moly $9.50

Fender Strut KitsThese kits include everything you need to make your own custom fender struts for the best style and fit. The pre-bent bars are made extra long

so they can be trimmed down to your desired size. Welding is required. Each kit comes with:

A pair of curved (10" Radius) 1/2" x 19" long solid round bar stock for the uprights or 17" long straight bars

2 5/16" x .75 long counter bored bungs

2 threaded bullet bungs

2 Allen bolts and two hex head bolts

Part # Bar Type Price Per Kit

SFSK Straight $27.00

CFSK Curved $30.00

Motor Mount KitThis kit includes all the materials needed to create a custom motor mount for V-twin motorcycles. Made for SAE head bolt sizes 3/8" (evo and TC)

and 7/16" (Pan, Shovel, and Iron head). Each kit contains:

two counter bored bungs of the correct size to bolt to the heads

two pieces of curved 5/8" or 1/2" dia straight solid round stock that can be trimmed to length

3" long round blind threaded bung tapped to 1/2" x 20

all mock up hardware

Part # Mount Type Motor Type Price Per Kit

SMMKPS Straight Pan/Shovel $20.00

SMMKIH Straight Iron Head $20.00

SMMKETC Straight Evo/TC $20.00

CMMKPS Curved Pan/Shovel $25.00

CMMKIH Curved Iron Head $25.00

CMMKETC Curved Evo/TC $25.00

Jockey Shift Motor Mount KitThis is our jockey shift motor mount kit designed for those looking to make a motor mount with an integral pivot for a jockey shift handle. They are

available for all Harley motor types. Each kit includes the following:

2 counter bore bungs of the correct size for your motor type

3" long center mount tapped to 1/2 X 20 on one side to accept bolt from the chassis tab and tapped to accept a shoulder bolt at the other

weld on pivot with a bronze oilite bushing installed

stainless shoulder bolt and wave washer to reduce play

1/2" cold rolled steel to span the gap between the heads and center mount

2 Socket head cap screws for the heads and hex bolt for the center mount

Part # Motor Type Price Per Kit

JSMMKPS Pan/Shovel $37.50

JSMMKIH Iron Head $37.50

JSMMKETC Evo/TC $37.50

Rubber Tank Mount KitThese mounts are most commonly used for mounting gas tanks and oil tanks. The rubber isolators help reduce the risk of cracks developing in your fluid

container. They use the common flat side tank mount rubbers that can be found at any Harley dealer. The I.D. of the sleeves is 5/16". Each kit includes:

(2) 1/4"thick steel mounting tabs

(4) rubber isolators and sleeves included in full kit

Tabs available individual as well with out rubbers

Part # Price Per Kit

RTMK $24.00

Individual Parts

Part # Description Price Each

RI516 rubber isolator with inner sleeve $2.25

RTMT rubber tank mount steel tab $8.50

Thin Universal Mount KitThese are similar to our universal mounts but by utilizing different hardware we are able to shrink down the overall height. These are used anytime

a lower profile mount is desired.

A kit includes:

2ea threaded bung tapped to 5/16x18 that is .400" tall

2ea countersunk bung that is .350" tall

2ea taper head bolt

when bolted together the set measures .750" (or 3/4") overall with an O.D. of 3/4"

Part # Price Per Kit

TUMK $15.00

Universal Mount KitThese universal weld on mounts can be used to mount just about anything. We commonly use them to mount fenders, oil tanks, and exhaust systems.

Each kit includes:

2 counter bored bungs

2 blind tapped bungs

2 Allen bolts

sold in sizes of either 1/4", 5/16" or 3/8

Part # Thread Size Overall Length Outer Diameter Price Per Kit

UMK14 1/4 x 20 2" 5/8" $14.00

UMK516 5/16 x 18 2" 3/4" $14.00

UMK38 3/8 x 16 2.25" 3/4" $14.00

Brake Stay TabA weld on tab to allow a mount for your brake stay rod, available in either standard or with lightening holes for extra style.

• Weld on tab for your rear brake stay and other uses

• Made from 3/16 mild steel

• 3/8 Diameter hole

• Water jet cut

• Sold Each

Part # Style Price Each

BST Standard $8.00

BSTS W/ Lightening Holes $9.00

Frame Tubing CapsWeld on domed end caps help give a clean look for the end of round tube.

• Full half domes

• Made from 10ga mild steel

• Used to clean up tubing ends

• Available in either 1" or 1 1/4" O.D.

• All are weld in style

• Sold Each

Part # Diameter Price Each

FTC1 1" $5.75

FTC125 1 .25" $6.25

Triumph Axle PlatesGreat premade part if you are making your own loop style chassis.

• Made for 3/4" axle

• Made from 5/16" mild steel

• Water jet cut for minimum distortion

• Reliefs for factory triumph axle adjuster

• All are weld in style

• Sold per pair

Part# Price Per Pair

TAP34 $40.00

British Fender Strut KitThis is a weld together kit with all the parts needed to create your own custom fender strut. Made just for those using a smaller 5" wide fender,

common to Triumph and BSA builds.

The kit includes:

2ea 5/8 O.D. counter bored bungs to fit 1/4" hardware

2ea 5/8 O.D. threaded bungs tapped to 1/4x20

3/8" O.D. cold rolled steel hoop pre-bent to fit a 5" wide fender, made extra long so you can trim to fit

2ea socket head cap screws

2ea hex bolts

Part # Price Per Kit

TFSK $30.00

O2 Sensor BungsThese bungs are for adapting your custom exhaust system to work with your fuel injections factory O2 sensors:

Made of 1018 mild steel

Tapped to fit 18mm x 1.5 O2 sensors used by Harley and other OEM applications

1" O.D. and .500" thick

Sold Each

Part # Price Each

O2SB18 $5.50

Trumpet Exhaust Tips

• Used to add a custom touch to the end of your fabricated exhaust

• Made from 16ga mild steel

• Available in either 1 3/4" or 2" O.D.

• All are weld in style

• Sold Per pair

• Sold In a 10" length with a tip formed on either end

Part # Diameter Price Per set

TET175 1.75" $19.50

TET2 2.0" $22.00

Weld Together T-bar KitThis kit contains all the parts you need to make your own 1" dia. set of T-bars. Simply trim the pre-coped uprights to your desired length, weld in the threaded riser

spuds, and weld on the cross bar to your desired angle. The upper bar is made 32" long and is not dimpled so you can trim them down to your desired width.

Pre-bent 1" x .120 wall mild steel tubing 32" wide

2 pre coped uprights 11" long

2 weld in bungs tapered to accept 1/2" coarse thread hardware

Part # Price Per Kit

WTTBK $49.00

Gusseted T-BarsThese T-bars are built with strength and style in mind. We add gussets to our T-bars for the most demanding of riders which gives extra strength for piece of mind

and good looks. We have heard stories of riders going down at freeway speeds and our T-bars have remained arrow straight. We offer

our T-bars in three different heights if you want a different height T-bar than what we carry, we can make a custom height or pullback T-bar for you. Item

ships 2-5 days from ordering due to the amount of options.

1" or 1 1/4" Diameter

8", 10",12" or 14" Height

7" Pullback, 29" Width

Permit use of factory controls, Internally wired

1 1/4 are stepped down to 1" to fit all controls and housings

Available with or without tach/speedo mounts

Available in raw or powder black

Part # Diameter Height Price per Bar

GTB1 1" 8, 10, 12, 14 $135.00

GTB125 1.25" 8, 10, 12, 14 $165.00

Extra Options Upgrade Cost

Speedo Mount $10.00

Black powder coat $35.00

Dyna Tank Lift 2007 and UpThese Dyna Tank Lifts/Mounts are designed for late model Dynas to give their tanks that ever popular Frisco look. They install in a few minutes most of the time

not even having to change the crossover tube.

Fit 2007 to present Dyna

Made of 1018 mild steel

Powder coated in high gloss black to match your OEM chassis

Available in either a 2" or 2 5/8" lifting height

Part # Height Price Per Kit

DTL2 2" $50.00

DTL258 2 5/8" $50.00 2007 and up

Dyna Tank Lift 2006 and earlierThese Dyna Tank Lifts/Mounts are designed for 2006 and earlier Dynas to give their tanks that ever popular Frisco look. Like all of our bolt on products they

are made to last, built form 3/16 and 1/4" thick steel. They install in a few minutes, some models you will need to lengthen the crossover tube:

Fit 2006 and earlier Dyna

Made of 1018 mild steel

Powder coated in high gloss black to match your OEM chassis

Raises the front mount by 2 1/2"

Part # Price Per Kit

DTLE $50.00

49MM Quarter Fairing Adapter BracketsThese are our Quick Release Dyna Quarter Fairing Brackets for 49mm forks. We supply you with the adapter brackets that will let you install your factory

quarter fairing to a late model 49mm front fork. The HD quick releases are not included but are readily available at your local HD dealer. Fairing brackets

are slotted for a large amount of adjustment.

Made of 1018 mild steel

Powder coated in satin black to match your OEM brackets

Hardware and headlight spacers are included

HD part #57192-05 not included need quantity of 4

Part # Price Per Kit

QFB49 $89.00

Drilled Air Cleaner CoversThese drilled air cleaner covers are fully CNC machined from 6061-t6 aircraft quality aluminum and are offered in three different finishes. These air cleaner

covers can be used for most custom and factory Harleys that have already installed a breather kit (stage 1 kit). At a 7" outer diameter, they hold tight to your

air cleaner to help reduce the overall size, to help increase air flow and good looks they are drilled and chamfered all the way around the radius.

The hard black anodized covers will not fade from the sun and turn purple like the standard black anodize that some others use .

Made of 6061-t6 aircraft aluminum

3/16" thickness through the entire shell

7" outer diameter

Drilled and Chamfered 360 degrees around with 5/8 holes

Available in a brushed finish for $139.00

Available in polished or hard black anodize with highlight for $179.00

Part # Finish Price Each

DACC Brushed $135.00

DACCP Polished $179.00

DACCBA Black Anodize $179.00

Fox Suspension Seat

This is our suspension seat equipped wit a Fox Float air shock. The seat suspension allows 2.5" of adjustable dampened travel. Unlike most sprung seats that

tend to buck you off the seat after a big bump, our seat set up with adjustable rebound can be adjusted to slow the seat down so it will feel like you are

riding a bike with rear suspension not a rigid. The shock available now is the Fox Float; the coil over pictured is no longer available. With the air

shock pressure in the shock can be adjusted to adjust for rider weight and greater tuning of the suspension. This is a weld in kit, some modifications

to the frame may have to be made:

Water jet cut weld on mounting tabs

All pivot points are equipped with oilite bushings and stainless shoulder bolts for long life

Kit includes our Front Seat Pivot

Seat pan not included

Fox Float shock

Part# Price per Kit

FSSK $549.00