steel and brass grilles 01 - brooke air · brass, aluminium and steel mesh grilles have been...
TRANSCRIPT
![Page 1: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/1.jpg)
PublicationStandardWeather
LOUVRES APRIL 2005
Section
J C V E N T S
Stainless Steel & Brass GrillesArchitectural Mesh
Stainless Steel and BrassGrilles
![Page 2: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/2.jpg)
To compliment the range of air handling grilles and diffusers a full range of brass, aluminium and steel mesh grilles have been intriduced.
Handmade, woven and punched meshes are manufactured to suit designers requirements, standard brass angle, tee; and channel frames plus various inhouse fabricated frames are available for recessed, flanged, or rebated installations.
Apertures are conventionally specified in terms of nominal width (W) x height (H). Maximum panel sizes vary, dependent upon which mesh design is chosen, modular sections are available to create large area requirements. If overall sizes are required, please denote by o/a.
For use with natural, convected or forced ventilation supply or extract. These meshes can be specified to cloak apertures or enhance design schemes.
Solid brass.Solid brass and clear stove lacquer. Aluminium/powder coated, stove enamelled and anodised.Mild steel/powder coated, stove enamelled etc.
25mm 25mm
3mm
3mm
25m
m
25m
m
Mesh Grilles
introduction
description
size
finishes
frames
applications
![Page 3: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/3.jpg)
Square woven Brass Mesh
Diamond woven Brass Mesh
Perforated Aluminium Plate
Small Diamond Regency Brass Mesh
Square woven Aluminium Mesh
Perforated and Woven Mesh Grilles
J C V E N T S
![Page 4: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/4.jpg)
Large Diamond regency grilles are Manufactured from 3mm square brass wire with halved and rivetted joints.
The joints can be plain, riveted or fitted with floral or reeded rosettes which can be fitted to alternate joints or to each joint.
Frame: T = 25x25 T U = 25x25 ChannelRivet: P = Plain rivet U = Floral rosette R = Reeded rosettePosition: H = Half F = FullMesh: M = Mesh
A fine backing mesh can be fitted if required.
options
type LDR
description
Large Diamond Regency Mesh Grilles
LDR/RF/M
ordering details
type positionrivetframe
LDR / T / P / F / M / 300 x 300 / 2
mesh size W & H quantityexample:
![Page 5: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/5.jpg)
Large Diamond Regency Mesh Grilles
LDR/PF/M
LDR/UH
J C V E N T S
![Page 6: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/6.jpg)
Medium diamond regency grilles are manufactured from 3mm square brass wire with halved and riveted joints. The joints can be plain riveted or fitted with floral or reeded rosettes which can be fitted to alternate joints or to each joint. A fine or large backing mesh may be fitted if required.
description
Medium Diamond Regency Mesh Grilles
MDR/UH/M
MDR/RF
MDR/UH/M
![Page 7: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/7.jpg)
Small diamond regency grilles are manufactured from 3mm square brass wire with halved and riveted joints. The joints can be plain riveted or fitted with floral or reeded rosettes which can be fitted to alternate joints or to every joint. A fine or large backing mesh may be fitted if required.
description
Small Diamond Regency Mesh Grilles
SDR/RH/M
SDR/UF
SDR/UH/M
J C V E N T S
![Page 8: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/8.jpg)
Perforated sheet from 0.7mm sheet brass and sold in 1800 x 900mm sheets or cut to size.
Brass perforated punched sheet (0.7mm) Maximum sheet size 1800x900mm (in one panel)
Small Club
description
Perforated Brass Grilles
![Page 9: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/9.jpg)
Large Church
Perforated sheet from 0.7mm sheet brass and sold in 1800 x 900mm sheets or cut to size.
Brass perforated punched sheet (0.7mm) Maximum sheet size 1800x900mm (in one panel)
Perforated Brass Grilles
description
J C V E N T S
![Page 10: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/10.jpg)
description
Perforated Aluminium Grilles
Small Church
Slot and Diamond
![Page 11: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/11.jpg)
Perforated Brass Grilles
descriptionLarge Club
Ring and Square
J C V E N T S
![Page 12: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/12.jpg)
Plain wire, 10mm square4.5mm Brass wire.
Plain wire, 12mm square3mm Brass wire.
Plain wire, 10mm square6mm Brass wire.
description
Square Woven Mesh Grilles
BP 12S 3
BP 10S 5
BP 10S 6
![Page 13: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/13.jpg)
Reeded wire, 19mm square4.5mm Brass wire.
Reeded wire, 10mm square3mm Brass wire.
Reeded wire, 25mm square6mm Brass wire.
description
Square Woven Mesh Grilles
BR 10S 3
BR 19S 5
BR 25S 6
J C V E N T S
![Page 14: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/14.jpg)
Plain wire, 19mm square4.5mm Brass wire.
Plain wire, 6mm square3mm Brass wire.
Plain wire, 12mm square6mm Brass wire.
description
Diamond Woven Mesh Grilles
BP 6D 3
BP 19D 5
BP 12D 6
![Page 15: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/15.jpg)
Reeded wire, 12mm square4.5mm Brass wire.
Reeded wire, 12mm square3mm Brass wire.
Reeded wire, 19mm square6mm Brass wire.
description
Diamond Woven Mesh Grilles
BR 12D 3
BR 12D 5
BR 19D 6
J C V E N T S
![Page 16: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/16.jpg)
Plain wire, alternate double weave3mm and 6mm Brass wire.
Plain wire, 19mm square double weave3mm Brass wire.
Plain wire, rectangular weave3mm Brass wire.
description
Variation of Woven Mesh Grilles
BP 19S 3
BP S 63
BP RW 3
![Page 17: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/17.jpg)
Plain wire, 10mm square6mm Aluminium wire.
Plain wire, 12mm square12mm Brass wire.
Plain wire, 8mm diamond3mm Aluminium wire.
description
Variation of Woven Mesh Grilles
BP 12S 12
AP 10S 6
AP 8D 3
Aluminium Woven Mesh Grilles
J C V E N T S
![Page 18: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/18.jpg)
Linear bar grilles ideally suited for wall, cill or floor applications.Grilles can be supplied in modular units or 2000mm sections for continuous runs.
Manufactured from Brass or stainless steel blades pitched at 12.5mm centres.
options
type F1N - F15N - F1B
description
Linear Grilles
ordering details
type finishmetalflange
F1N / 25S / SB / PL / Width 2000mm / Height 100mm / 6
opening size quantityexample:
STAINLESS STEEL AND BRASS LINEAR BAR GRILLES
F1 N = 0° deflection 3mm bladeF15N = 15° deflection 3mm blade F1B = 0° deflection 6mm blade (suitable for floor use)
SS: Stainless steel DB = 240 grit (dull buff)P = Polished*standard grade 304, 316 available on request:
Brass: SBP = PolishedL = Clear Lacquered
BMA = Bronze Metal Antique CP = Chrome Plated NP = Nickel Plated
finish
![Page 19: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/19.jpg)
25F25mm
25m
m
25mm x 3mm
19F19mm
19m
m
19mm x 3mm
32S32mm
32m
m
32mm x 1.5mm
25S25mm
25m
m
25mm x 1.5mm
19X19mm
19m
m
19mm x 1.5mm
F
25mm
25m
m
25mm x 3mm
NOTE: for floor use 25mm x 25mm x 5mm
Section through Framed Grille
Section through Core Grille
Section through Framed Grille
0O Deflection
F15N 15O Deflection
F1B 0O Deflection
Linear Grilles
F1N/25S
STAINLESS STEEL AND BRASS LINEAR BAR GRILLES
F1N/CO
F15N/25S F15N/CO
F1B/25S F1B/CO
J C V E N T S
![Page 20: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/20.jpg)
Specials and other products available in Stainless Steel and Brass
1: IC4 : 4 Way Diffuser2: E25C : Eggcrate Grille3: DDH : Duble Deflection Grille4: F1N : Linear Bar Grille5: OMF : Louvres6: DJ : Drum Jet Diffuser
1
23
4
NOTE: Stainless steel products can be manufactured to suit offshore specifications.
key
![Page 21: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/21.jpg)
56
J C V E N T S
![Page 22: Steel and Brass grilles 01 - Brooke Air · brass, aluminium and steel mesh grilles have been intriduced. Handmade, woven and punched meshes are manufactured to suit designers requirements,](https://reader033.vdocuments.mx/reader033/viewer/2022060722/60823a700ca2f808390d9c00/html5/thumbnails/22.jpg)
J C Vents Corporate Brochuresection 1
Tel: 01268 561122Fax: 01268 560606
email: [email protected]: www.jcvents.co.uk
Standard Weather Louvressection 2
Self Drain Louvres High Performance
section 3
Penthouse / Turret Louvressection 4
Continuous / Curtain Wall LouvresDoor Assemblies
section 5
Shaped Louvres Specials
section 6
Fabricated Louvres and ProductsAcoustic Louvres
section 7
Solar Shadingsection 8
Back Draught Louvressection 8
J C V E N T S
JC House,Hurricane Way,Wickford Business Park,Wickford,Essex. SS11 8YB
Louvre programme literature