STATSHIELD BAG, SHIELDING, METAL-OUT, ?· STATSHIELD® BAG, SHIELDING, METAL-OUT, ZIPPER ... Statshield®…

Download STATSHIELD BAG, SHIELDING, METAL-OUT, ?· STATSHIELD® BAG, SHIELDING, METAL-OUT, ZIPPER ... Statshield®…

Post on 31-Aug-2018

212 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

<ul><li><p>DRAWING NUMBER48770</p><p>DATE:June2016</p><p>STATSHIELD BAG, SHIELDING, METAL-OUT, ZIPPER</p><p> 2016 DESCO INDUSTRIES INC.Employee Owned</p><p>PROTEKTIVE PAK13520 MONTE VISTA AVENUE, CHINO, CA 91710PHONE (909) 627-2578ProtektivePak.com</p><p>Specifications and procedures subject to change without notice.</p><p>Statshield bags are packaged 100 per package in an oversized shielding bag. See Shielding Bag Storage at TB-7057.</p><p>Statshield and Statfree are Registered Trademarks of Desco Industries Inc.See Bag Selection Chart Click HERE.</p><p>ANSI/ESD S541 Section 6.2 Outside an EPATransportation of sensitive products outside of an EPA shall require packaging that provides:1. Low charge generation2. Dissipative or conductive materials for intimate contact3. A structure that provides electrostatic discharge shielding.</p><p> Mixed Unsortable Plastic ScrapMixed unsortable plastic scrap shall contain assorted </p><p>plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable </p><p>into individual grades.</p><p>Protektive Paks bags are recyclable</p><p>7Made in the </p><p>United States of America</p><p>Side Weld Seals 3/8 in. (0.10)</p><p>Low Charging Clear Zipper</p><p>Date &amp; Lot Code Printed for QCTraceablility</p><p>Weld Seal</p><p>Soft Fold Bottom</p><p>STATSHIELD METAL-OUT SERIESSpecifications:</p><p>Standard Document Meets Requirements of: ANSI/ESD S541 (ANSI/ESD S20.20) ESD Protective PackagingANSI/ESD S11.4 Level 3 Technical Requirements</p><p>Electrical Properties Typical Values Test Procedures/MethodSurface Resistance: Outer Surface 1 x 104 to &lt; 1 x 108 ohms ANSI/ESD STM11.11 Inner Surface 1 x 104 to &lt; 1 x 1011 ohms ANSI/ESD STM11.11 Discharge Shielding 10 lbs/in. 375F, 1/2 sec 60 psiNon-corrosive Pass MIL-STD-3010, M3005Silicone Not detected ASTM E168Marking Adhesion Pass IPC-TM-650 2.4.1</p><p>Chemical PropertiesCorrosion No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel</p><p>RoHS 2, REACH and Conflict Minerals StatementNone of the RoHS 2 restricted materials, REACH substances of very high concern as of 2015/12/17, or Conflict Minerals are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See Protektive Paks Limited Warranty at ProtektivePak.com.</p><p>High Performance Static Dissipative Abrasion Resistant Coating</p><p>AluminumShielding Layer</p><p>Low Charging Static Dissipative Proprietary Polyester Layer</p><p>Low Charging Static Dissipative Proprietary Inner Polyethylene Layer</p>http://www.protektivepak.comhttp://www.protektivepak.comhttp://documents.protektivepak.com/pdf/TB-7057.pdfhttp://protektivepak.descoindustries.com/Limited-Warranty.aspx</li></ul>