TECH BULLETIN T-10016-4

G E N E R A L I N F O R M AT I O N

The STATLOK® 1100 Static Shielding Bag from

ADVANTEK is a 3.0 mil thick transparent buried metal

ESD static shielding bag engineered to protect contents

from electro-static shock. These bags are ideal for

applications in which contents require protection from

static, but not from moisture. STATLOK 1100 meets the

requirements set forth in EIA 541 and MIL-PRF-81705D

Type III, Class 1. The durable construction of this bag

ensures the protection of static sensitive devices

during transport and storage.

STATLOK 1100 bags are available in several standard

sizes designed to contain matrix trays, tubes and 13"

shipping reels. However, ADVANTEK’s state-of-the-art

equipment is capable of manufacturing a custom size

bag to fit the needs of nearly any project.

The STATLOK 1100 Static Shielding Bag provides

superior protection for static sensitive devices.

STATLOK® 1100 Static Shielding BagConstructionSTATLOK 1100 Static Shielding Bags are constructed in three layers. These layers

consist of a static dissipative polyester outer layer and a static dissipative polyethylene

inner layer with a center metallized shield layer.

ConfigurationsSTATLOK 1100 Static Shielding Bags are available in custom sizes or in several industry-

standard sizes designed for 13" reels, matrix trays and tubes. Bags are offered in a 2-seal

configuration with a bottom fold or a 3-seal configuration. Our standard ADVANTEK

hot-stamp or your company’s hot-stamped or flexographically printed logo are available.

The STATLOK 1100 is easily vacuumed

and sealed by most vacuum sealing

equipment. A temperature range of

300°F to 400°F applied to both sides of

the material for up to 4.5 seconds will

yield a strong and consistent seal.

The durable 3.0 mil construction of the

STATLOK 1100 will help prevent punc-

ture and help ensure that vacuum is

maintained and the contents of the bag

are protected. The diagram at right

details the typical configuration of

this product.

Shelf Life / Storage ConditionsIt is recommended that STATLOK 1100 bags be used within 3 years of the date of

manufacture. ADVANTEK recommends storing this product in its original packaging

in a climate controlled environment where temperature ranges from 20° C +/- 16° C

(68° +/- 61°F) and relative humidity is 50% +/- 30%. Exceeding these recommended

storage conditions could result in inconsistent product performance.

© Advantek, Inc. 2004

Typical Bag Configuration

Bag Opening

Bottom Fold or 3rd Seal

Width

Length

3/8” wide seal

3/8”

wid

e se

al

Static Dissipative PolyesterMetallized Shield

Static Dissipative Polyethylene

© Advantek, Inc. 2004SG04-027G 5/04

Physical Properties

Electrical Properties

Property Typical Value Test Method/Standard

Thickness 3 mils +/- 10% N/A

Tensile Strength 25 lbs/in +/- 15% ASTM D 882

Puncture Resistance 12 lbs +/- 10% FTMS 101 MTH 2065

Seam Strength Pass MIL-PRF-81705D

Heat Sealing ConditionsTemperature 300˚F - 400˚F N/ATime 0.6 - 4.5 seconds N/APressure 30 - 70 PSI N/A

Note: The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. However, actual values may vary somewhat from thosedepicted above. Customer should determine product suitability based upon their own internal criteria.

Property Typical Value Test Method/Standard

EMI Attenuation 45dB MIL-PRF-81705D

Surface ResistivityInterior < 1012 ohms/square ASTM D 257Exterior < 1012 ohms/square ASTM D 257

Static Decay < 0.05 seconds FTMS 101 MTH 4046

Static Shielding < 30 volts EIA 541

Charge GenerationTeflon 0.09 n/C sq. in. Modified Incline PlaneQuartz 0.01 n/C sq. in. Modified Incline Plane

Note: The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. However, actual values may vary somewhat from thosedepicted above. Customer should determine product suitability based upon their own internal criteria.

United States Taiwan

China

Singapore

JapanGermany

United Kingdom

Advantek, Inc.

5801 Clearwater Drive

Minnetonka, MN 55343

Tel 952-938-6800

Fax 952-938-1800

Advantek, Inc.

51 Morgan Drive

Norwood, MA 02062

Tel 781-551-9666

Fax 781-551-8630

Advantek Taping Systems

6839 Mowry Avenue

Newark, CA 94560

Tel 510-623-1877

Fax 510-623-1886

Advantek Taping Systems

10610 Metric Drive, Suite 169

Dallas, TX 75243

Tel 214-342-1555

Fax 214-342-1557

Advantek GmbH

Riegeler Str. 4D

D-79111 Freiburg

Germany

Tel 49-(0) 761-45546-0

Fax 49-(0) 761-45546-99

Advantek UK Ltd.

McGregor House

Southbank Business Park

Kirkintilloch

Glasgow, Scotland G66 1XF

Tel 44-(0) 141-578-2231

Fax 44-(0) 141-578-2232

Advantek Taiwan, Inc.

No. 5, Wu-Chuan 6th Road

Wu-Ku Industrial Park

Taipei Hsien 10248

Taiwan, R.O.C.

Tel 886-2-2290-1789

Fax 886-2-2299-6850

Advantek, Inc. China

Room #501, Tian Lin Building

300, Tian Lin Road

Shanghai, China 200233

Tel 86-21-6485-1812

Advantek Products (S) Pte Ltd.

7 Woodlands Terrace

Woodlands East Industrial Estate

Singapore 738432

Tel 65-67596800

Fax 65-67595800

Advantek Dy, Ltd.

17-11-3F, Kita-machi

Tokorozawa, Saitama

Japan 359-1113

Tel 81-42-939-1727

Fax 81-42-939-1728