µstat cable connectors for screen-printed electrodes · µstat cable connectors for screen-printed...

1
www.metrohm-dropsens.com μStat Cable Connectors for Screen-Printed Electrodes Refs. CASTDIR, CAST, BICAST, CAST8X, CAST1X8, CASTLFCL 01 Metrohm DropSens offers connectors that act as an interface between our Screen-Printed Electrodes and Metrohm DropSens potentiostats. μStat Cable Connector for TLFCL format Screen-Printed Electrodes Ref. CASTLFCL Connects TLFCL format SPEs to all Metrohm DropSens instruments unless μStat-i 400 and μStat-i 400s. μStat 8000/P Cable Connector for format 8X Screen-Printed Electrodes Ref. CAST8X Connects 8X format SPEs (array of 8 electrochemical cells) to μStat 8000/P. Recommended when working by placing microvolume drops. μStat Cable Connector for Screen-Printed Electrodes Ref. CASTDIR Connects single (1 WE) SPEs to all Metrohm DropSens instruments unless μStat-i 400 and μStat-i 400s. Recommended when working by placing microvolume drops. μStat Cable Connector for Screen-Printed Electrodes Refs. CAST, CAST-P and BICAST Connects single SPEs (ref.CAST), single plastic substrate SPEs (ref. CAST-P) or dual SPEs (ref. BICAST) to all Metrohm DropSens instruments unless μStat-i 400 and μStat-i 400s. Recommended when using DropSens SPEs in conjunction with Flow-Cells and μStat 8000/P Cable Connector for individual Screen-Printed Electrodes Ref. CAST1X8 Connects up to 8 single (1 WE) SPEs to μStat 8000/P. Recommended when working by placing microvolume drops. i-μStat Cable Connector for Screen-Printed Electrodes Refs. I-CAST and I-BICAST Connects single SPEs (ref.I-CAST) to μStat-i 400s or dual SPEs (ref. I-BICAST) μStat-i 400. Recommended when using SPEs in conjunction with Flow-Cells and Cells, or by dipping the SPEs in solution.

Upload: others

Post on 21-Aug-2020

17 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: µStat Cable Connectors for Screen-Printed Electrodes · µStat Cable Connectors for Screen-Printed Electrodes 01 Refs. CASTDIR, CAST, BICAST, CAST8X, CAST1X8, CASTLFCL Metrohm DropSensoffers

www.metrohm-dropsens.com

µStat Cable Connectors for Screen-Printed ElectrodesRefs. CASTDIR, CAST, BICAST, CAST8X, CAST1X8, CASTLFCL01

Metrohm DropSens offers connectors that act as an interface between our Screen-Printed Electrodes and Metrohm DropSens potentiostats.

µStat Cable Connector for TLFCL format Screen-PrintedElectrodesRef. CASTLFCLConnects TLFCL format SPEs to all Metrohm DropSens instruments unless µStat-i 400 and µStat-i 400s.

µStat 8000/P Cable Connector for format 8X Screen-Printed ElectrodesRef. CAST8XConnects 8X format SPEs (array of 8 electrochemical cells) to µStat 8000/P.

Recommended when working by placing microvolume drops.

µStat Cable Connector for Screen-Printed ElectrodesRef. CASTDIRConnects single (1 WE) SPEs to all Metrohm DropSens instruments unless µStat-i 400 and µStat-i 400s.

Recommended when working by placing microvolume drops.

µStat Cable Connector for Screen-Printed ElectrodesRefs. CAST, CAST-P and BICASTConnects single SPEs (ref.CAST), single plastic substrate SPEs (ref. CAST-P) or dual SPEs (ref. BICAST) to all Metrohm DropSens instruments unless µStat-i 400 and µStat-i 400s.

Recommended when using DropSens SPEs in conjunction with Flow-Cells and

µStat 8000/P Cable Connector for individual Screen-PrintedElectrodesRef. CAST1X8Connects up to 8 single (1 WE) SPEs to µStat 8000/P.

Recommended when working by placing microvolume drops.

i-µStat Cable Connector for Screen-Printed ElectrodesRefs. I-CAST and I-BICASTConnects single SPEs (ref.I-CAST) to µStat-i 400s or dual SPEs (ref. I-BICAST) µStat-i 400.

Recommended when using SPEs in conjunction with Flow-Cells and Cells, or by dipping the SPEs in solution.