standards published - unms.sk · new international standards published between 01 june and 30 june...
TRANSCRIPT
Standards published
New International Standards published between 01 June and 30 June 2017
* Available in English only
** French version of standard previously published in English only
Price
group
TC 5 Ferrous metal pipes and metallic fittings
ISO 18468:2017 * Ductile iron fittings, accessories and their joints and valves — Epoxy coating
B
TC 6 Paper, board and pulps
ISO
11093-8:2017 Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural
modulus by experimental modal analysis
B
TC 8 Ships and marine technology
ISO 20438:2017 * Ships and marine technology — Offshore mooring chains
D
TC 17 Steel
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical
testing
D
TC 20 Aircraft and space vehicles
ISO
2635:2003/Amd
1:2017
* Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications —
Dimensions and characteristics — Amendment 1: Correction of table 1
XZ
ISO 17770:2017 * Space systems — Cube satellites (CubeSats)
B
ISO 19923:2017 * Space environment (natural and artificial) — Plasma environments for generation of worst case
electrical potential differences for spacecraft
C
TC 21 Equipment for fire protection and fire fighting
ISO/TS
7240-29:2017
* Fire detection and alarm systems — Part 29: Video fire detectors
H
TC 29 Small tools
ISO/TS
13399-60:2014 Cutting tool data representation and exchange — Part 60: Reference dictionary for connection
systems
H
ISO 2725-1:2017 Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
B
ISO 2725-2:2017 Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets
("impact")
B
ISO 2725-3:2017 Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets
("non-impact")
A
TC 34 Food products
ISO
10272-1:2017 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter
spp. — Part 1: Detection method
D
ISO
10272-2:2017 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter
spp. — Part 2: Colony-count technique
D
ISO 19020:2017 Microbiology of the food chain — Horizontal method for the immunoenzymatic detection of staphy-
lococcal enterotoxins in foodstuffs
D
ISO 19343:2017 Microbiology of the food chain — Detection and quantification of histamine in fish and fishery products
— HPLC method
C
ISO
21528-1:2017 Microbiology of the food chain — Horizontal method for the detection and enumeration of Entero-
bacteriaceae — Part 1: Detection of Enterobacteriaceae
C
ISO
21528-2:2017 Microbiology of the food chain — Horizontal method for the detection and enumeration of Entero-
bacteriaceae — Part 2: Colony-count technique
C
TC 35 Paints and varnishes
ISO
19403-1:2017
* Paints and varnishes — Wettability — Part 1: Terminology and general principles
B
ISO
19403-2:2017
* Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid
surfaces by measuring the contact angle
C
ISO
19403-3:2017
* Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the
pendant drop method
B
ISO
19403-4:2017
* Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of
the surface tension of liquids from an interfacial tension
B
ISO
19403-5:2017
* Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of
the surface tension of liquids from contact angles measurements on a solid with only a disperse
contribution to its surface energy
A
ISO
19403-6:2017
* Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
B
ISO
19403-7:2017
* Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off
angle)
C
TC 43 Acoustics
ISO 532-1:2017 * Acoustics — Methods for calculating loudness — Part 1: Zwicker method
G
ISO 532-2:2017 * Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method
E
TC 45 Rubber and rubber products
ISO 6472:2017 Rubber compounding ingredients — Abbreviated terms
C
ISO 2878:2017 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of
electrical resistance
B
ISO 4662:2017 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
E
ISO 5600:2017 * Rubber — Determination of adhesion to rigid materials using conical shaped parts
B
ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
A
ISO
20299-2:2017 Film for wrapping rubber bales — Part 2: Natural rubber
A
TC 58 Gas cylinders
ISO 13338:2017 * Gas cylinders — Gases and gas mixtures — Determination of tissue corrosiveness for the selection
of cylinder valve outlets
B
TC 61 Plastics
ISO/TS
15791-2:2017
* Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use
of intermediate-scale tests for semi-finished and finished products
C
ISO
22007-4:2017 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
C
ISO 15064:2017 * Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the
isomer ratio in toluenediisocyanate (TDI)
B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO
21809-5:2017 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in
pipeline transportation systems — Part 5: External concrete coatings
E
TC 77 Products in fibre reinforced cement
ISO 8336:2017 * Fibre-cement flat sheets — Product specification and test methods
F
TC 83 Sports and other recreational facilities and equipment
ISO
19202-1:2017 Summer toboggan runs — Part 1: Safety requirements and test methods
F
ISO
19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation
E
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 12800:2017 Nuclear fuel technology — Guidelines on the measurement of the specific surface area of uranium
oxide powders by the BET method
B
TC 92 Fire safety
ISO/TR
16576:2017
* Fire safety engineering — Examples of fire safety objectives, functional requirements and safety
criteria
H
TC 105 Steel wire ropes
ISO 2408:2017 * Steel wire ropes — Requirements
F
TC 106 Dentistry
ISO/TR
18845:2017 Dentistry — Test methods for machining accuracy of computer-aided milling machines
E
TC 113 Hydrometry
ISO
4359:2013/Amd
1:2017
* Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes — Amendment 1
XZ
TC 123 Plain bearings
ISO 4378-1:2017 Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials
and their properties
F
ISO 4378-2:2017 Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear
B
ISO 4378-3:2017 Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication
D
TC 131 Fluid power systems
ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
B
TC 133 Clothing sizing systems - size designation, size measurement methods and digital
fittings
ISO 5971:2017 Size designation of clothes — Tights
B
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 7510:2017 * Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the
amounts of constituents
A
ISO 16611:2017 * Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints
made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP)
— Dimensions, requirements and tests
D
ISO/TS
20656-1:2017
* Plastics piping systems — General rules for structural design of glass-reinforced thermosetting
plastics (GRP) pipes — Part 1: Buried pipes
D
TC 146 Air quality
ISO/TS
20593:2017 Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) —
Pyrolysis-GC-MS method
E
TC 147 Water quality
ISO 13843:2017 Water quality — Requirements for establishing performance characteristics of quantitative microbi-
ological methods
G
ISO 20227:2017 * Water quality — Determination of the growth inhibition effects of waste waters, natural waters and
chemicals on the duckweed Spirodela polyrhiza — Method using a stock culture independent mi-
crobiotest
B
TC 150 Implants for surgery
ISO 7199:2016 Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators)
C
ISO 11491:2017 * Implants for surgery — Determination of impact resistance of ceramic femoral heads for hip joint
prostheses
B
ISO
18192-3:2017
* Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Impinge-
ment-wear testing and corresponding environmental conditions for test of lumbar prostheses under
adverse kinematic conditions
C
TC 155 Nickel and nickel alloys
ISO 9725:2017 Nickel and nickel alloy forgings
C
TC 163 Thermal performance and energy use in the built environment
ISO
17772-1:2017
* Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental
input parameters for the design and assessment of energy performance of buildings
G
ISO
52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and
procedures
H
ISO/TR
52000-2:2017
* Energy performance of buildings — Overarching EPB assessment — Part 2: Explanation and justi-
fication of ISO 52000-1
H
ISO
52003-1:2017 Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1:
General aspects and application to the overall energy performance
E
ISO/TR
52003-2:2017
* Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 2:
Explanation and justification of ISO 52003-1
E
ISO 6946:2017 Building components and building elements — Thermal resistance and thermal transmittance —
Calculation methods
F
ISO Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part
10077-1:2017 1: General F
ISO
10077-2:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part
2: Numerical method for frames
G
ISO 10211:2017 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calcu-
lations
G
ISO 12631:2017 Thermal performance of curtain walling — Calculation of thermal transmittance
F
ISO 13370:2017 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
F
ISO 13786:2017 Thermal performance of building components — Dynamic thermal characteristics — Calculation
methods
D
ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients —
Calculation method
D
ISO 14683:2017 Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and
default values
D
ISO
52010-1:2017 Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data
for energy calculations
E
ISO/TR
52010-2:2017
* Energy performance of buildings - External climatic conditions — Part 2: Explanation and justification
of ISO 52010-1
D
ISO
52016-1:2017 Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and
sensible and latent heat loads — Part 1: Calculation procedures
H
ISO/TR
52016-2:2017
* Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and
sensible and latent heat loads — Part 2: Explanation and justification of ISO 52016-1 and ISO
52017-1
H
ISO
52017-1:2017 Energy performance of buildings — Sensible and latent heat loads and internal temperatures — Part
1: Generic calculation procedures
E
ISO
52018-1:2017 Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy
balance and fabric features — Part 1: Overview of options
F
ISO/TR
52018-2:2017
* Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy
balance and fabric features — Part 2: Explanation and justification of ISO 52018-1
F
ISO/TR
52019-2:2017
* Energy performance of buildings — Hygrothermal performance of building components and building
elements — Part 2: Explanation and justification
G
ISO
52022-1:2017 Energy performance of buildings — Thermal, solar and daylight properties of building components
and elements — Part 1: Simplified calculation method of the solar and daylight characteristics for
solar protection devices combined with glazing
C
ISO/TR
52022-2:2017 Energy performance of buildings — Thermal, solar and daylight properties of building components
and elements — Part 2: Explanation and justification
F
ISO Energy performance of buildings — Thermal, solar and daylight properties of building components
52022-3:2017 and elements — Part 3: Detailed calculation method of the solar and daylight characteristics for solar
protection devices combined with glazing
E
TC 164 Mechanical testing of metals
ISO 24213:2017 * Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
B
ISO 1099:2017 * Metallic materials — Fatigue testing — Axial force-controlled method
D
TC 165 Timber structures
ISO 8375:2017 * Timber structures — Glued laminated timber — Test methods for determination of physical and
mechanical properties
D
TC 168 Prosthetics and orthotics
ISO 8548-5:2003 Prosthetics and orthotics — Limb deficiencies — Part 5: Description of the clinical condition of the
person who has had an amputation
A
TC 171 Document management applications
ISO 18829:2017 * Document management — Assessing ECM/EDRM implementations — Trustworthiness
B
ISO 22938:2017 * Document management — Electronic content/document management (CDM) data interchange
format
C
TC 172 Optics and photonics
ISO 8255-1:2017 * Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties
A
TC 173 Assistive products for persons with disability
ISO 15621:2017 * Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation
B
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 11790:2017 * Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling
systems
C
ISO 11794:2017 * Copper, lead, zinc and nickel concentrates — Sampling of slurries
F
TC 195 Building construction machinery and equipment
ISO
19720-1:2017
* Building construction machinery and equipment — Plants for the preparation of concrete and mortar
— Part 1: Terminology and commercial specifications
D
TC 198 Sterilization of health care products
ISO
11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of
development, validation and routine control
F
TC 204 Intelligent transport systems
ISO
12813:2015/Amd
1:2017
* Electronic fee collection — Compliance check communication for autonomous systems — Amend-
ment 1
XZ
ISO
13111-1:2017
* Intelligent transport systems (ITS) — The use of personal ITS station to support ITS service provision
for travellers — Part 1: General information and use case definitions
E
ISO
13141:2015/Amd
1:2017
* Electronic fee collection — Localisation augmentation communication for autonomous systems —
Amendment 1
XZ
ISO
15638-10:2017
* Intelligent transport systems — Framework for cooperative telematics applications for regulated
commercial freight vehicles (TARV) — Part 10: Emergency messaging system/eCall
F
ISO
15638-18:2017
* Intelligent transport systems — Framework for cooperative telematics applications for regulated
commercial freight vehicles (TARV) — Part 18: ADR (Dangerous Goods)
G
ISO 17361:2017 * Intelligent transport systems — Lane departure warning systems — Performance requirements and
test procedures
B
ISO/TS
21219-7:2017
* Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts
group, generation 2 (TPEG2) — Part 7: Location referencing container (TPEG2-LRC)
C
ISO/TS
21219-22:2017
* Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts
group, generation 2 (TPEG2) — Part 22: OpenLR location referencing (TPEG2-OLR)
G
TC 205 Building environment design
ISO
16484-5:2017
* Building automation and control systems (BACS) — Part 5: Data communication protocol
H
TC 206 Fine ceramics
ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of
ceramic composites — Determination of specific heat capacity
D
TC 207 Environmental management
ISO/TR
14073:2017
* Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046
G
TC 210 Quality management and corresponding general aspects for medical devices
ISO/TR
80002-2:2017
* Medical device software — Part 2: Validation of software for medical device quality systems
H
TC 215 Health informatics
ISO/TR
18638:2017
* Health informatics — Guidance on health information privacy education in healthcare organizations
E
TC 217 Cosmetics
ISO 16212:2017 Cosmetics — Microbiology — Enumeration of yeast and mould
D
ISO/TR
18818:2017
* Cosmetics — Analytical method — Detection and quantitative determination of Diethanolamine
(DEA) by GC/MS
B
TC 219 Floor coverings
ISO
11378-2:2001/A
md 1:2017
Textile floor coverings — Laboratory soiling tests — Part 2: Drum test — Amendment 1
XZ
TC 227 Springs
ISO
26910-1:2009/A
md 1:2017
Springs — Shot peening — Part 1: General procedures — Amendment 1
XZ
TC 229 Nanotechnologies
ISO/TR
19601:2017
* Nanotechnologies — Aerosol generation for air exposure studies of nano-objects and their aggre-
gates and agglomerates (NOAA)
G
ISO/TS
80004-11:2017 Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms
B
TC 281 Fine bubble technology
ISO
20480-1:2017
* Fine bubble technology — General principles for usage and measurement of fine bubbles — Part 1:
Terminology
A
TMBG Technical Management Board - groups
ISO 10377:2013 Consumer product safety — Guidelines for suppliers
F
CASCO Committee on conformity assessment
ISO/IEC TR
17028:2017
* Conformity assessment — Guidelines and examples of a certification scheme for services
E
JTC 1 Information technology
ISO/IEC
29341-1-2:2017
* Information technology — UPnP Device Architecture — Part 1-2: UPnP Device Architecture Version
2.0
H
ISO/IEC
29341-30-1:2017
* Information technology — UPnP Device Architecture — Part 30-1: IoT management and control
device control protocol — IoT management and control architecture overview
F
ISO/IEC
29341-30-2:2017
* Information technology — UPnP Device Architecture — Part 30-2: IoT management and control
device control protocol — IoT management and control device
B
ISO/IEC
29341-30-10:201
7
* Information technology — UPnP Device Architecture — Part 30-10: IoT management and control
device control protocol — Data store service
F
ISO/IEC
29341-30-11:201
7
* Information technology — UPnP Device Architecture — Part 30-11: IoT management and control
device control protocol — IoT management and control data model service
H
ISO/IEC
29341-30-12:201
7
* Information technology — UPnP Device Architecture — Part 30-12: IoT management and control
device control protocol — IoT management and control transport generic service
D
ISO/IEC/IEEE
15289:2017
* Systems and software engineering — Content of life-cycle information items (documentation)
H
ISO/IEC TS * Information technology — Systems and software quality requirements and evaluation (SQuaRE) —
25011:2017 Service quality models D
ISO/IEC
29134:2017
* Information technology — Security techniques — Guidelines for privacy impact assessment
F
ISO/IEC
18477-7:2017
* Information technology — Scalable compression and coding of continuous-tone still images — Part 7:
HDR Floating-Point Coding
F
ISO/IEC
20000-6:2017
* Information technology — Service management — Part 6: Requirements for bodies providing audit
and certification of service management systems
C
Standards confirmed
The following International Standards are confimred for a five year period:
TC 6 Paper, board and pulps
ISO 2470-2:2008 (reconfirmed)
ISO 2471:2008 (reconfirmed)
ISO 22754:2008 (reconfirmed)
TC 17 Steel
ISO 18286:2008 (reconfirmed)
ISO 3763:1976 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 413:1974 (reconfirmed)
ISO 1021:1980 (reconfirmed)
ISO 4153:1981 (reconfirmed)
ISO 11892:2012
ISO 14300-1:2011
ISO 14300-2:2011
ISO 26869:2012
TC 22 Road vehicles
ISO 6722-1:2011
ISO 9534:1989 (reconfirmed)
ISO 14572:2011
ISO 16183:2002 (reconfirmed)
ISO 8715:2001 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 9191:1991 (reconfirmed)
ISO 9192:1991 (reconfirmed)
TC 24 Particle characterization including sieving
ISO 4782:1987 (reconfirmed)
ISO 4783-1:1989 (reconfirmed)
ISO 4783-2:1989 (reconfirmed)
ISO 7805-1:1984 (reconfirmed)
ISO 7805-2:1987 (reconfirmed)
ISO 7806:1983 (reconfirmed)
ISO 10630:1994 (reconfirmed)
ISO 14315:1997 (reconfirmed)
TC 26 Copper and copper alloys
ISO 4741:1984 (reconfirmed)
TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 18132-1:2011
ISO 18132-2:2008 (reconfirmed)
ISO 18132-3:2011
TC 29 Small tools
ISO/TS 13399-2:2014
ISO/TS 13399-3:2014
ISO/TS 13399-4:2014
ISO/TS 13399-5:2014
ISO 3685:1993
ISO 4875-1:2006
ISO 4875-2:2006
ISO 6987:2012
TC 33 Refractories
ISO 14719:2011
ISO 21068-1:2008 (reconfirmed)
ISO 21068-2:2008 (reconfirmed)
ISO 21068-3:2008 (reconfirmed)
TC 34 Food products
ISO 11746:2012
ISO 488:2008 (reconfirmed)
ISO 1736:2008 (reconfirmed)
ISO 1737:2008 (reconfirmed)
ISO 1854:2008 (reconfirmed)
ISO 2446:2008 (reconfirmed)
ISO 2450:2008 (reconfirmed)
ISO 7208:2008 (reconfirmed)
ISO 7328:2008 (reconfirmed)
ISO 8260:2008 (reconfirmed)
ISO 8381:2008 (reconfirmed)
ISO 9231:2008 (reconfirmed)
ISO 20541:2008 (reconfirmed)
ISO 22118:2011
ISO 22119:2011
ISO 6865:2000 (reconfirmed)
ISO/TS 23647:2010 (reconfirmed)
TC 35 Paints and varnishes
ISO 8501-1:2007 (reconfirmed)
ISO 19840:2012
TC 37 Terminology and other language and content resources
ISO 22128:2008 (reconfirmed)
TC 38 Textiles
ISO 105-A06:1995 (reconfirmed)
ISO 105-A08:2001 (reconfirmed)
ISO 105-B08:1995 (reconfirmed)
ISO 105-F01:2001 (reconfirmed)
ISO 105-F03:2001 (reconfirmed)
ISO 105-F04:2001 (reconfirmed)
ISO 105-F05:2001 (reconfirmed)
ISO 105-Z04:1995 (reconfirmed)
ISO 105-Z07:1995 (reconfirmed)
ISO 105-Z08:1995 (reconfirmed)
ISO 105-Z09:1995 (reconfirmed)
TC 42 Photography
ISO 12231:2012
ISO 12234-1:2012
ISO 16067-2:2004 (reconfirmed)
ISO 17321-1:2012
ISO 18903:2002 (reconfirmed)
ISO 18905:2002 (reconfirmed)
ISO 18912:2002 (reconfirmed)
ISO 18913:2012
ISO 18921:2008 (reconfirmed)
ISO 18926:2012
ISO 18929:2012
ISO 18933:2012
ISO 18936:2012
ISO 20462-3:2012
ISO 21550:2004 (reconfirmed)
TC 43 Acoustics
ISO 16:1975 (reconfirmed)
ISO 389-8:2004 (reconfirmed)
ISO 28961:2012
ISO 2923:1996 (reconfirmed)
ISO 3745:2012
ISO 4869-3:2007 (reconfirmed)
ISO/TS 4869-5:2006 (reconfirmed)
ISO 7196:1995 (reconfirmed)
ISO/TS 7849-1:2009 (reconfirmed)
ISO 9613-2:1996 (reconfirmed)
ISO 10302-2:2011
ISO 11205:2003 (reconfirmed)
ISO 11689:1996 (reconfirmed)
ISO 11820:1996 (reconfirmed)
ISO 11957:1996 (reconfirmed)
ISO 13475-1:1999 (reconfirmed)
ISO/TS 13475-2:2000 (reconfirmed)
ISO 14163:1998 (reconfirmed)
ISO 14257:2001 (reconfirmed)
ISO/TS 15666:2003 (reconfirmed)
ISO 17624:2004 (reconfirmed)
ISO 3382-3:2012
ISO 9052-1:1989 (reconfirmed)
TC 44 Welding and allied processes
ISO 7287:2002 (reconfirmed)
ISO 8206:1991 (reconfirmed)
ISO 12170:1996 (reconfirmed)
TC 45 Rubber and rubber products
ISO 127:2012
ISO 248-2:2012
ISO 4652:2012
ISO 4656:2012
ISO 14932:2012
ISO/TS 16095:2014
ISO/TS 16096:2014
ISO/TS 16176:2011 (reconfirmed)
ISO 16564:2004 (reconfirmed)
ISO 21461:2012
TC 48 Laboratory equipment
ISO 648:2008 (reconfirmed)
ISO 24998:2008 (reconfirmed)
TC 58 Gas cylinders
ISO 10692-1:2001 (reconfirmed)
ISO 10692-2:2001 (reconfirmed)
ISO 15245-2:2001 (reconfirmed)
ISO 32:1977 (reconfirmed)
TC 59 Buildings and civil engineering works
ISO/TS 12720:2014
TC 61 Plastics
ISO 295:2004 (reconfirmed)
ISO 584:1982 (reconfirmed)
ISO 2554:1997 (reconfirmed)
ISO 3521:1997 (reconfirmed)
ISO 3671:1976 (reconfirmed)
ISO 3673-2:2012
ISO 8974:2002 (reconfirmed)
ISO 9396:1997 (reconfirmed)
ISO 9944:1990 (reconfirmed)
ISO 11402:2004 (reconfirmed)
ISO 14897:2002 (reconfirmed)
ISO 17710:2002 (reconfirmed)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas in-
dustries
ISO 10426-2:2003
ISO 10431:1993
ISO 13534:2000
ISO 13628-1:2005
ISO 13628-7:2005
TC 69 Applications of statistical methods
ISO 7870-3:2012
ISO 5725-6:1994 (reconfirmed)
ISO 11843-5:2008 (reconfirmed)
TC 72 Textile machinery and accessories
ISO 8116-2:2008 (reconfirmed)
ISO 8116-3:2008 (reconfirmed)
ISO 8116-4:2008 (reconfirmed)
ISO 8116-5:2008 (reconfirmed)
ISO 5249:1988 (reconfirmed)
ISO 9902-1:2001 (reconfirmed)
ISO 9902-2:2001 (reconfirmed)
ISO 9902-3:2001 (reconfirmed)
ISO 9902-4:2001 (reconfirmed)
ISO 9902-5:2001 (reconfirmed)
ISO 9902-7:2001 (reconfirmed)
TC 74 Cement and lime
ISO 863:2008 (reconfirmed)
ISO 9597:2008 (reconfirmed)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 2919:2012
ISO 7212:1986 (reconfirmed)
ISO 8529-1:2001 (reconfirmed)
ISO 11933-4:2001 (reconfirmed)
ISO 11933-5:2001 (reconfirmed)
TC 92 Fire safety
ISO/TS 3814:2014
ISO/TS 5658-1:2006 (reconfirmed)
ISO 5658-4:2001 (reconfirmed)
TC 96 Cranes
ISO 11660-4:2012
ISO 16881-1:2005 (reconfirmed)
TC 102 Iron ore and direct reduced iron
ISO 3852:2007 (reconfirmed)
TC 105 Steel wire ropes
ISO 4346:1977 (reconfirmed)
ISO 8792:1986 (reconfirmed)
TC 106 Dentistry
ISO 6360-5:2007 (reconfirmed)
ISO 6360-7:2006 (reconfirmed)
ISO 21672-1:2012
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10068:2012
ISO/TS 15694:2004 (reconfirmed)
TC 110 Industrial trucks
ISO 15870:2000 (reconfirmed)
ISO 22915-11:2011
TC 113 Hydrometry
ISO/TS 15768:2000 (reconfirmed)
ISO/TS 3716:2006 (reconfirmed)
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 5389:2005 (reconfirmed)
ISO 10440-1:2007 (reconfirmed)
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-13:2011
TC 127 Earth-moving machinery
ISO 3449:2005 (reconfirmed)
TC 130 Graphic technology
ISO 12647-8:2012
ISO 16684-1:2012
TC 131 Fluid power systems
ISO 11500:2008 (reconfirmed)
ISO 16431:2012
ISO 3601-1:2012
TC 135 Non-destructive testing
ISO 16810:2012
ISO 16811:2012
ISO 16823:2012
ISO 16826:2012
ISO 16827:2012
ISO 16828:2012
ISO 16831:2012
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 12176-2:2008 (reconfirmed)
ISO/TS 19911:2010 (reconfirmed)
ISO/TS 26873:2010 (reconfirmed)
ISO/TS 10465-1:2007 (reconfirmed)
TC 145 Graphical symbols
ISO 3864-3:2012
TC 146 Air quality
ISO 13138:2012
ISO 28902-1:2012
TC 154 Processes, data elements and documents in commerce, industry and administration
ISO 6422-1:2010 (reconfirmed)
ISO 8439:1990 (reconfirmed)
ISO 8440:1986 (reconfirmed)
TC 155 Nickel and nickel alloys
ISO 7520:1985 (reconfirmed)
ISO 8343:1985 (reconfirmed)
TC 156 Corrosion of metals and alloys
ISO 9223:2012
ISO 9224:2012
ISO 9225:2012
ISO 9226:2012
ISO 17474:2012
ISO 21608:2012
TC 163 Thermal performance and energy use in the built environment
ISO 21129:2007 (reconfirmed)
TC 164 Mechanical testing of metals
ISO 9513:2012
TC 170 Surgical instruments
ISO 7741:1986 (reconfirmed)
TC 171 Document management applications
ISO 8514-1:2000 (reconfirmed)
ISO 8514-2:2000 (reconfirmed)
ISO 11698-1:2000 (reconfirmed)
ISO 11698-2:2000 (reconfirmed)
ISO 11928-1:2000 (reconfirmed)
ISO 11928-2:2000 (reconfirmed)
ISO 12651-1:2012
ISO 12653-1:2000 (reconfirmed)
ISO 12653-2:2000 (reconfirmed)
ISO 23868:2008 (reconfirmed)
TC 172 Optics and photonics
ISO 11421:1997 (reconfirmed)
ISO/TS 24348:2014
TC 188 Small craft
ISO 4566:1992 (reconfirmed)
ISO 8845:1994 (reconfirmed)
ISO 8847:2004 (reconfirmed)
ISO 8848:1990 (reconfirmed)
TC 190 Soil quality
ISO 12914:2012
ISO 11269-1:2012
ISO 11269-2:2012
TC 192 Gas turbines
ISO 3977-4:2002 (reconfirmed)
ISO 3977-5:2001 (reconfirmed)
ISO 3977-9:1999 (reconfirmed)
ISO 11086:1996 (reconfirmed)
ISO 19860:2005 (reconfirmed)
TC 194 Biological and clinical evaluation of medical devices
ISO 13022:2012
TC 198 Sterilization of health care products
ISO/TS 13004:2013
ISO 13408-1:2008 (reconfirmed)
ISO 14161:2009
ISO/TS 17665-3:2013
TC 206 Fine ceramics
ISO 14703:2008 (reconfirmed)
ISO 26424:2008 (reconfirmed)
TC 213 Dimensional and geometrical product specifications and verification
ISO 1119:2011
ISO 2768-1:1989 (reconfirmed)
ISO 8512-1:1990 (reconfirmed)
ISO 8512-2:1990 (reconfirmed)
ISO 10360-6:2001 (reconfirmed)
ISO 15530-3:2011
ISO/TS 16610-32:2009 (reconfirmed)
ISO 17450-1:2011
ISO 22432:2011
ISO 25178-2:2012
TC 215 Health informatics
ISO/TS 18530:2014
ISO/TS 21547:2010 (reconfirmed)
ISO/TS 22789:2010 (reconfirmed)
ISO/TS 29585:2010 (reconfirmed)
TC 219 Floor coverings
ISO 1765:1986 (reconfirmed)
ISO 2549:1972 (reconfirmed)
ISO 3415:1986 (reconfirmed)
ISO 3416:1986 (reconfirmed)
ISO 5086:1977 (reconfirmed)
ISO 11378-2:2001 (reconfirmed)
ISO 11858:1999 (reconfirmed)
ISO 11859:1999 (reconfirmed)
ISO 11860:1999 (reconfirmed)
ISO 17504:1999 (reconfirmed)
TC 222 Personal financial planning
ISO 22222:2005 (reconfirmed)
TC 228 Tourism and related services
ISO 13289:2011
ISO 13970:2011
TC 229 Nanotechnologies
ISO/TS 12901-2:2014
TC 274 Light and lighting
ISO 30061:2007 (reconfirmed)
TMBG Technical Management Board - groups
ISO 20121:2012
JTC 1 Information technology
ISO/IEC 13250-2:2006 (reconfirmed)
ISO/IEC 24738:2006 (reconfirmed)
Standards withdrawn
Period from 01 June to 30 June 2017
TC 34 Food products
ISO/TS
10272-2:2006
(replaced by ISO 10272-2:2017)
TC 72 Textile machinery and accessories
ISO 2544:1975 (replaced by )
ISO 5247-2:1989 (replaced by )
ISO 6176:1994 (replaced by )
ISO 8116-6:1995 (replaced by )
ISO 8116-7:1995 (replaced by )
ISO 8116-8:1995 (replaced by )
ISO 11677-3:1995 (replaced by )
ISO 11825:1995 (replaced by )
TC 83 Sports and other recreational facilities and equipment
ISO 10966:2011 (replaced by )
TC 147 Water quality
ISO/TR
13843:2000
(replaced by ISO 13843:2017)
TC 163 Thermal performance and energy use in the built environment
ISO 16343:2013 (replaced by ISO 52003-1:2017)
ISO/TR
16344:2012
(replaced by ISO 52000-1:2017)
ISO 16346:2013 (replaced by ISO 52000-1:2017)
ISO 13791:2012 (replaced by ISO 52017-1:2017)
TC 204 Intelligent transport systems
ISO/TS
15638-10:2013
(replaced by ISO 15638-10:2017)
ISO/TS
15638-18:2013
(replaced by ISO 15638-18:2017)
ISO/PAS
17684:2003
(replaced by )
Meeting calendar
The meeting calendar is available at
https://www.iso.org/meeting-calendar.html