standards published - sutniso 27509:2012/cor 1:2013 petroleum and natural gas industries — compact...

Standards published

New International Standards published between 01 September and 30 September 2013

* Available in English only

** French version of standard previously published in English only

Price group

TC 1 Screw threads

ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data

K

TC 2 Fasteners

ISO 14581:2013 Fasteners — Hexalobular socket countersunk flat head screws D

ISO 14582:2013 Fasteners — Hexalobular socket countersunk head screws, high head C

TC 6 Paper, board and pulps

ISO/TR 11371:2013 * Pulps — Basic guidelines for laboratory refining J

ISO 8791-2:2013 * Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method H

TC 20 Aircraft and space vehicles

ISO 14222:2013 * Space environment (natural and artificial) — Earth upper atmosphere R

TC 22 Road vehicles

ISO 6621-5:2013 * Internal combustion engines — Piston rings — Part 5: Quality requirements G

ISO 15118-1:2013 * Road vehicles — Vehicle to grid communication interface — Part 1: General information and use-case definition V

ISO 15170-2:2001/Cor 1:2013 * Road vehicles — Four-pole electrical connectors with pins and twist lock —

Part 2: Tests and requirements — Technical Corrigendum 1 free

ISO/TR 12350:2013 * Road vehicles — Injury risk curves for the evaluation of occupant protection in side impact tests

XA

TC 23 Tractors and machinery for agriculture and forestry

ISO 9912-3:2013 * Agricultural irrigation equipment — Filters for microirrigation — Part 3: Automatic flushing strainer-type filters and disc filters D

ISO 11783-14:2013 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 14: Sequence control V

TC 27 Solid mineral fuels

ISO 23380:2013 * Selection of methods for the determination of trace elements in coal E

TC 29 Small tools

ISO 8405:2013 Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes

B

ISO 6262-1:2013 End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank B

ISO 6262-2:2013 End mills with indexable inserts — Part 2: End mills with Morse taper shank B

ISO 6986:2013 Side and face milling (slotting) cutters with indexable inserts — Dimensions B

TC 39 Machine tools

ISO 28881:2013/Cor 1:2013 * Machine tools — Safety — Electro-discharge machines — Technical

Corrigendum 1 free

TC 42 Photography

ISO 15740:2013 * Photography — Electronic still picture imaging — Picture transfer protocol (PTP) for digital still photography devices XA

TC 43 Acoustics

ISO 1999:2013 * Acoustics — Estimation of noise-induced hearing loss L

TC 44 Welding and allied processes

ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) G

TC 45 Rubber and rubber products

ISO/TS 16097:2013 * Vulcanized crumb rubber — Evaluation procedures D

TC 51 Pallets for unit load method of materials handling

ISO/TS 8611-4:2013 * Pallets for materials handling — Flat pallets — Part 4: Procedure for predicting creep responses in stiffness tests for plastic pallets using regression analyses E

TC 61 Plastics

ISO 30021:2013 * Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites D

TC 67

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 14692-3:2002 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design W

ISO 14692-4:2002 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation U

ISO 27509:2012/Cor 1:2013

Petroleum and natural gas industries — Compact flanged connections with IX seal ring — Technical Corrigendum 1 free

TC 70 Internal combustion engines

ISO 15619:2013 * Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio

Q

TC 72 Textile machinery and accessories

ISO 21485:2013 * Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction A

TC 83 Sports and other recreational facilities and equipment

ISO 20957-1:2013 Stationary training equipment — Part 1: General safety requirements and test methods

H

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 12749-2:2013 * Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection

Q

ISO/ASTM 51539:2013 * Guide for use of radiation-sensitive indicators B

ISO 18589-7:2013 Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitting radionuclides U

ISO 16117:2013 Nuclear criticality safety — Estimation of the number of fissions of a postulated criticality accident P

TC 102 Iron ore and direct reduced iron

ISO 17992:2013 * Iron ores — Determination of arsenic content — Hydride generation atomic absorption spectrometric method J

TC 105 Steel wire ropes

ISO 16839:2013 Steel wire ropes — Determination of the transverse rigidity of steel wire ropes under no axial load condition

C

TC 106 Dentistry

ISO 28888:2013 Dentistry — Screening method for erosion potential of oral rinses on dental hard tissues C

TC 108 Mechanical vibration, shock and condition monitoring

ISO/TR 19201:2013 Mechanical vibration — Methodology for selecting appropriate machinery vibration standards N

TC 123 Plain bearings

ISO 12130-2:2013 * Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings

F

TC 126 Tobacco and tobacco products

ISO 10362-2:2013 Cigarettes — Determination of water in smoke condensates — Part 2: Karl Fischer method

D

ISO/TR 17219:2013 Review of human smoking behaviour and recommendations for a new ISO standard for the machine smoking of cigarettes W

ISO 20773:2013 Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney

M

TC 135 Non-destructive testing

ISO 16810:2012 Non-destructive testing — Ultrasonic testing — General principles E

ISO 16823:2012 Non-destructive testing — Ultrasonic testing — Transmission technique D

ISO 16827:2012 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities

U

ISO 16828:2012 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities K

TC 146 Air quality

ISO 17091:2013 Workplace air — Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide — Method by measurement of corresponding cations by suppressed ion chromatography

N

TC 150 Implants for surgery

ISO 8637:2010 Cardiovascular implants and extracorporeal systems — Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators J

ISO 8638:2010 Cardiovascular implants and extracorporeal systems — Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters G

IEC/TR 62653:2013 * Guidelines for the safe use of medical products in dialysis treatment U

TC 163 Thermal performance and energy use in the built environment

ISO 16346:2013 * Energy performance of buildings — Assessment of overall energy performance

V

TC 164 Mechanical testing of metals

ISO 18265:2013 * Metallic materials — Conversion of hardness values X

ISO 22889:2013 * Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint T

TC 165 Timber structures

ISO 16507:2013 * Timber structures — Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies — Test methods

L

TC 172 Optics and photonics

ISO 10110-12:2007/Amd 1:2013

Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1 XZ

ISO 8255-2:2013 * Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging

E

ISO 12858-2:1999/Amd 1:2013 * Optics and optical instruments — Ancillary devices for geodetic instruments —

Part 2: Tripods — Amendment 1 XZ

ISO 8980-3:2013 Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods P

ISO 14889:2013 Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses C

ISO 15798:2013 Ophthalmic implants — Ophthalmic viscosurgical devices H

TC 173 Assistive products for persons with disability

ISO 10542-1:2012/Cor 1:2013 *

Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems — Technical Corrigendum 1

free

TC 189 Ceramic tile

ISO 13007-4:2013 * Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts L

TC 190 Soil quality

ISO 28258:2013 * Soil quality — Digital exchange of soil-related data V

ISO/TS 16727:2013 * Soil quality — Determination of mercury — Cold vapour atomic fluorescence spectrometry (CVAFS) C

TC 199 Safety of machinery

ISO 14119:2013 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection

V

TC 201 Surface chemical analysis

ISO 13424:2013 * Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis T

TC 213 Dimensional and geometrical product specifications and verification

ISO 286-2:2010/Cor 1:2013

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1

free

ISO 25178-603:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments

N

TC 218 Timber

ISO 24294:2013 * Timber — Round and sawn timber — Vocabulary V

TC 223 Societal security

ISO 22398:2013 * Societal security — Guidelines for exercises Q

CASCO Committee on conformity assessment

ISO/IEC TS 17021-4:2013 *

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management systems

D

JTC 1 Information technology

ISO/IEC 24739-3:2010/Cor 1:2013 *

Information technology — AT Attachment with Packet Interface - 7 — Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3) — Technical Corrigendum 1

free

ISO/IEC 9796-3:2006 * Information technology — Security techniques — Digital signature schemes giving message recovery — Part 3: Discrete logarithm based mechanisms V

ISO/IEC 27001:2013 * Information technology — Security techniques — Information security management systems — Requirements

L

ISO/IEC 27002:2013 * Information technology — Security techniques — Code of practice for information security controls W

ISO/IEC 13818-2:2013 * Information technology — Generic coding of moving pictures and associated

audio information — Part 2: Video XC

ISO/IEC 14496-10:2012/Amd 2:2013 * Information technology — Coding of audio-visual objects — Part 10: Advanced

Video Coding — Amendment 2: MVC extensions for inclusion of depth maps X

ISO/IEC 14496-12:2012/Amd 1:2013

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 1: Various enhancements including support

XZ

for large metadata

ISO/IEC 15444-12:2012/Amd 1:2013

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 1: Various enhancements including support for large metadata

XZ

ISO/IEC 23006-2:2013 * Information technology - Multimedia service platform technologies — Part 2:

MPEG extensible middleware (MXM) API R

ISO/IEC 23006-3:2013 * Information technology - Multimedia service platform technologies — Part 3:

Conformance and reference software N

Standards confirmed

The following International Standards are confimred for a five year period:

TC 17 Steel

ISO 629:1982 (reconfirmed)

ISO 10697-1:1992 (reconfirmed)

TC 20 Aircraft and space vehicles










TC 21 Equipment for fire protection and fire fighting


TC 23 Tractors and machinery for agriculture and forestry


TC 26 Copper and copper alloys









ISO 1554:1976



ISO 1812:1976



ISO 3220:1975


ISO/TR 4745:1978






TC 28 Petroleum products and lubricants


TC 34 Food products







ISO 12099:2010


TC 38 Textiles










TC 54 Essential oils

ISO/TR 210:1999 (reconfirmed)


TC 79 Light metals and their alloys

ISO 3116:2007

TC 87 Cork


TC 92 Fire safety



TC 101 Continuous mechanical handling equipment






















ISO/TR 5045:1979











ISO/TR 8435:1984


ISO/TR 9172:1987




TC 121 Anaesthetic and respiratory equipment

ISO 17510-2:2007

TC 131 Fluid power systems



TC 145 Graphical symbols


TC 163 Thermal performance and energy use in the built environment

ISO 24353:2008

ISO 29467:2008

ISO 29469:2008

ISO 29470:2008

ISO 29471:2008

ISO 29472:2008

ISO 29764:2008

ISO 29765:2008

ISO 29767:2008

ISO 29769:2008

ISO 29771:2008

ISO 13370:2007

TC 164 Mechanical testing of metals

ISO/TR 25679:2005

TC 172 Optics and photonics




ISO 11553-2:2007




TC 218 Timber






ISO/IEC 10373-7:2008

ISO/IEC 11694-3:2008

ISO/IEC 14443-1:2008

ISO/IEC 18013-2:2008


ISO/IEC 10779:2008

Standards withdrawn

Period from 01 September to 30 September 2013

TC 27 Solid mineral fuels

ISO 351:1996 (replaced by )

TC 34 Food products

ISO/TS 10272-3:2010 (replaced by )

TC 218 Timber

ISO 4473:1988 (replaced by ISO 24294:2013)

Meeting calendar

(update at 01 September 2013)

Meetings called for the month of August are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September-October 2013

30-4

Kista (Stockholm) (Sweden)

JTC 1/SC 25

Information technology/Interconnection of information technology equipment

30-4 Stockholm (Sweden) PC 248 Sustainability criteria for bioenergy

30-1

Tampere (Finland) TC 23/SC 17

Tractors and machinery for agriculture and forestry/Manually portable forest machinery

30-2 Berlin (Germany) TC 34/SC

15 Food products/Coffee

October 2013

2-3 Tampere (Finland) TC 23/SC 15

Tractors and machinery for agriculture and forestry/Machinery for forestry

2-3 St. John, Newfoundland (Canada)

TC 67/SC 8

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Arctic operations

3-4 Chantilly (USA) TC 58/SC 2 Gas cylinders/Cylinder fittings

4 Delft (Netherlands) TC 159/SC 3 Ergonomics/Anthropometry and biomechanics

5 Incheon (Korea, Republic of)

TC 106 Dentistry

7 Berlin (Germany) TC 10/SC 10 Technical product documentation/Process plant documentation

7 Istanbul (Turkey) TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

7-8 Milan (Italy) TC 44/SC Welding and allied processes/Equipment for gas welding, cutting and

8 allied processes

7-8 Sparks, Nevada (USA)

TC 209 Cleanrooms and associated controlled environments

7-8 Stockholm (Sweden) TC 238 Solid biofuels

7-9 Istanbul (Turkey) TC 126 Tobacco and tobacco products

7-10 Paris (France) JPC 2 Joint Project Committee - Energy efficiency and renewable energy

sources - Common terminology

7-11 Beijing (China) CASCO Committee on conformity assessment

7-11

Cambridge, Massachusetts (USA)

TC 121/SC 4 Anaesthetic and respiratory equipment/Terminology and semantics

7-11 Oslo (Norway) TC 138 Plastics pipes, fittings and valves for the transport of fluids

7-11

Colorado Springs (USA)

TC 247 Fraud countermeasures and controls

8 Istanbul (Turkey) TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

8 Tokyo (Japan) TC 70/SC 8

Internal combustion engines/Exhaust gas emission measurement

8 Boulder (USA) TC 202/SC 1 Microbeam analysis/Terminology

8-9 Berlin (Germany) TC 263 Coalbed methane (CBM)

8-10 Berlin (Germany) TC 59/SC

8 Buildings and civil engineering works/Sealants

8-10 Boulder (USA) TC 202 Microbeam analysis

8-13 Beijing (China) TC

173/SC 1 Assistive products for persons with disability/Wheelchairs

9 Istanbul (Turkey) TC 38/SC 23

Textiles/Fibres and yarns

9 Tokyo (Japan) TC 70 Internal combustion engines

9 Oslo (Norway) TC 138/SC 2

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies


Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

9 Boulder (USA) TC 202/SC 2 Microbeam analysis/Electron probe microanalysis

9 Boulder (USA) TC 202/SC 3

Microbeam analysis/Analytical electron microscopy

9-10

Seogwipo-si (Korea, Republic of)

TC 159 Ergonomics

10 Lyon (France) TC 22/SC 5 Road vehicles/Engine tests

10 Istanbul (Turkey) TC 38/SC 24

Textiles/Conditioning atmospheres and physical tests for textile fabrics


Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications


Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications


Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials

10 Boulder (USA) TC 202/SC 4

Microbeam analysis/Scanning electron microscopy (SEM)

10-11 Kobe (Japan) TC 204 Intelligent transport systems

11 Istanbul (Turkey) TC 38 Textiles

11 Berlin (Germany) TC 59/SC 13

Buildings and civil engineering works/Organization of information about construction works

11 Garching (Germany) TC 60 Gears

11 Garching (Germany) TC 60/SC 1 Gears/Nomenclature and wormgearing

11 Garching (Germany) TC 60/SC 2

Gears/Gear capacity calculation

11 Venice (Italy) TC 146/SC 2 Air quality/Workplace atmospheres

11 Jeju (Korea, Republic of)

TC 159/SC 5 Ergonomics/Ergonomics of the physical environment

13-17

London (United Kingdom)

TC 59/SC 15

Buildings and civil engineering works/Performance description of houses

14-15 Troy (USA) TC 22/SC

11 Road vehicles/Safety glazing materials

14-15

Frankfurt (Germany) TC 39/SC 10

Machine tools/Safety

14-15 Paris (France) TC 44/SC

10 Welding and allied processes/Unification of requirements in the field of metal welding

14-15 Brussels (Belgium) TC

122/SC 4 Packaging/Packaging and environment

14-17

Charlottenlund (Denmark)

TC 46/SC 8

Information and documentation/Quality - Statistics and performance evaluation

14-17

Stuttgart (Germany) TC 165 Timber structures

14-18 Paris (France) PC 271 Compliance management systems

14-18

Seoul (Korea, Republic of)


14-18 Sydney (Australia) TC 157 Non-systemic contraceptives and STI barrier prophylactics

15 Halifax (Canada) TC 31/SC 6

Tyres, rims and valves/Off-the-road tyres and rims

15 Paris (France) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

15 Paris (France) TC 44/SC 7

Welding and allied processes/Representation and terms

15-16 Paris (France) TC 2/SC 7 Fasteners/Reference standards

15-18 Berlin (Germany) TC

172/SC 7 Optics and photonics/Ophthalmic optics and instruments

16 Paris (France) TC 2/SC 11 Fasteners/Fasteners with metric external thread

16 Halifax (Canada) TC 31/SC 7

Tyres, rims and valves/Industrial tyres and rims

16 Paris (France) TC 44/SC 9 Welding and allied processes/Health and safety


TC 123/SC 2

Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions


TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details

16-18

Munich (Germany) TC 58/SC 3

Gas cylinders/Cylinder design

16-25 Beijing (China) TC

184/SC 2 Automation systems and integration/Robots and robotic devices

17 Paris (France) TC 2/SC 14 Fasteners/Surface coatings

17 Halifax (Canada) TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

17 London (United Kingdom)

TC 59/SC 3

Buildings and civil engineering works/Functional/user requirements and performance in building construction


TC 123/SC 5

Plain bearings/Quality analysis and assurance


TC 123/SC 6 Plain bearings/Terms and common items

17 Milan (Italy) TC 216 Footwear

17-18 Paris (France) TC 44 Welding and allied processes

18 Paris (France) TC 2 Fasteners

18 Paris (France) TC 2/SC 12 Fasteners/Fasteners with metric internal thread


Road vehicles/Injection equipment and filters for use on road vehicles


TC 59/SC 2

Buildings and civil engineering works/Terminology and harmonization of languages


TC 123 Plain bearings


TC 123/SC 7 Plain bearings/Special types of plain bearings

19-20

Jacksonville (USA) TC 24/SC 4

Particle characterization including sieving/Particle characterization

21 Singapore TC 8 Ships and marine technology

(Singapore)

21 Singapore (Singapore)

TC 8/SC 3 Ships and marine technology/Piping and machinery


TC 8/SC 6 Ships and marine technology/Navigation and ship operations


TC 8/SC 7 Ships and marine technology/Inland navigation vessels


TC 8/SC 11 Ships and marine technology/Intermodal and Short Sea Shipping


Water quality/Terminology

21-25


PC 283 Occupational health and safety management systems - Requirements

21-25

Huddersfield (United Kingdom)

TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

21-25 Berlin (Germany) TC 154 Processes, data elements and documents in commerce, industry and

administration

21-25

Sao Paulo (Brazil) TC 181 Safety of toys

21-25 Sydney (Australia) TC 215 Health informatics

22-24 Stockholm (Sweden) TC 20/SC

9 Aircraft and space vehicles/Air cargo and ground equipment

23 Paris (France) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

23 Berlin (Germany) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability


TC 25 Cast irons and pig irons

23 Courbevoie, Paris (France)

TC 111 Round steel link chains, chain slings, components and accessories

23 Berlin (Germany) TC 147/SC 3 Water quality/Radioactivity measurements


Assistive products for persons with disability/Classification and terminology


Assistive products for persons with disability/Accessible design

23 Tokyo (Japan) TC 206 Fine ceramics

24 Paris (France) TC 17/SC 7

Steel/Methods of testing (other than mechanical tests and chemical analysis)

24 Vienna (Austria) TC 83 Sports and other recreational facilities and equipment

24 Berlin (Germany) TC 147/SC 5 Water quality/Biological methods

24 Berlin (Germany) TC 147/SC 6 Water quality/Sampling (general methods)

24-25

Sarajevo (Bosnia and Herzegovina)

TC 34/SC 12

Food products/Sensory analysis

24-25

Berlin (Germany) TC 173 Assistive products for persons with disability

25 Vienna (Austria) TC 22/SC 22 Road vehicles/Motorcycles

25 Vienna (Austria) TC 22/SC 23 Road vehicles/Mopeds

25 Boston (USA) TC 92/SC 4 Fire safety/Fire safety engineering


Air quality/Stationary source emissions

25 Berlin (Germany) TC 147/SC 2 Water quality/Physical, chemical and biochemical methods

25 Berlin (Germany) TC 147/SC 4 Water quality/Microbiological methods

26 Berlin (Germany) TC 147 Water quality

28 Karlsruhe (Germany) TC 117 Fans

28-29

Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

28-31

Bali (Indonesia) TC 45/SC 1

Rubber and rubber products/Hoses (rubber and plastics)

29 Kochi (India) TC 234 Fisheries and aquaculture

30 Prague (Czech Republic)

TC 266 Biomimetics

31 Bali (Indonesia) TC 45/SC 2 Rubber and rubber products/Testing and analysis

31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

October-December 2013

7-11 Oslo (Norway) TC

138/SC 1

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)

October-November 2013

28-1

Bali (Indonesia) TC 45 Rubber and rubber products

28-1

Cambridge, Massachusetts (USA)

TC 121/SC 2

Anaesthetic and respiratory equipment/Airways and related equipment

28-2 Berlin (Germany) TC 130 Graphic technology

November 2013

1 Bali (Indonesia) TC 45/SC 3

Rubber and rubber products/Raw materials (including latex) for use in the rubber industry

2-9 Porto (Portugal) TC 176 Quality management and quality assurance

2-9 Porto (Portugal) TC 176/SC 1

Quality management and quality assurance/Concepts and terminology


Quality management and quality assurance/Supporting technologies

3-8 Gyeongju (Korea, Republic of)

TC 184/SC 4 Automation systems and integration/Industrial data

4 Berlin (Germany) TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts

4-8 Sydney (Australia) TC 34/SC 17 Food products/Management systems for food safety


Quality management and quality assurance/Quality systems

4-8 Bangkok (Thailand) TC 217 Cosmetics

4-8 Nairobi (Kenya) TC 285 Clean cookstoves and clean cooking solutions

4-9 Perros-Guirec (France)


5 Berlin (Germany) TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives

6 Berlin (Germany) TC 41/SC 1 Pulleys and belts (including veebelts)/Friction

6-8 Paris (France) TC 275 Sludge recovery, recycling, treatment and disposal

7 Vienna (Austria) TC 83/SC 4

Sports and other recreational facilities and equipment/Snowsports equipment

7 Okinawa (Japan) TC 201/SC 1 Surface chemical analysis/Terminology

7 Okinawa (Japan) TC 201/SC 2 Surface chemical analysis/General procedures

7 Okinawa (Japan) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy

7-9 Okinawa (Japan) TC 201 Surface chemical analysis

8 Delft (Netherlands) TC 92/SC 1 Fire safety/Fire initiation and growth

8 Shenzen (China) TC 160 Glass in building

8 Shenzen (China) TC 160/SC 1

Glass in building/Product considerations

8 Shenzen (China) TC 160/SC 2 Glass in building/Use considerations

8 Okinawa (Japan) TC 201/SC 3 Surface chemical analysis/Data management and treatment

8 Okinawa (Japan) TC 201/SC 4 Surface chemical analysis/Depth profiling

8 Okinawa (Japan) TC 201/SC 7

Surface chemical analysis/Electron spectroscopies

8 Washington, D.C (USA)

TC 227 Springs

9 Okinawa (Japan) TC 201/SC 8 Surface chemical analysis/Glow discharge spectroscopy

11 Mexico City (Mexico) TC Hydrometry/Velocity area methods

113/SC 1

11-15

Mexico City (Mexico) TC 94/SC 15

Personal safety -- Protective clothing and equipment/Respiratory protective devices

11-15 Tokyo (Japan) TC 98 Bases for design of structures

11-15 Mexico City (Mexico) TC 113 Hydrometry

12-13 Guangzhou (China) TC 137 Footwear sizing designations and marking systems


Industrial trucks/General terminology

13 Mexico City (Mexico) TC 113/SC 2 Hydrometry/Flow measurement structures

14 Tokyo (Japan) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks

14 Mexico City (Mexico) TC 113/SC 5 Hydrometry/Instruments, equipment and data management

14 Mexico City (Mexico) TC 113/SC 6

Hydrometry/Sediment transport

14-15 Redlands (USA) TC 211 Geographic information/Geomatics

15 Tokyo (Japan) TC 110 Industrial trucks

15 Mexico City (Mexico) TC 113/SC 8 Hydrometry/Ground water

15 Belo Horizonte (Brazil)

TC 229 Nanotechnologies

18 Berlin (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

18 Mumbay (India) TC 135/SC 8

Non-destructive testing/Infrared thermography for non-destructive testing

18-20 Berlin (Germany) TC 20 Aircraft and space vehicles

18-21 Exton (USA) TC 84 Devices for administration of medicinal products and intravascular

catheters

19-20 Tokyo (Japan) * TC 31/SC

9 Tyres, rims and valves/Valves for tube and tubeless tyres

19-21

Singapore (Singapore)

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

20-22 Tokyo (Japan) * TC 269 Railway applications

27 Milan (Italy) TC 221 Geosynthetics

30 Miami (USA) TC 44/SC 6

Welding and allied processes/Resistance welding and allied mechanical joining

December 2013

4-5 La Plaine St-Denis (France)

* TC 279 Innovation process: interaction, tools and methods

5 Brussels (Belgium) TC 94/SC 3

Personal safety -- Protective clothing and equipment/Foot protection

5-6 Paris (France) * TC 197 Hydrogen technologies

9-11

Geneva (Switzerland)

PC 284 Management system for quality of private security company (PSC) operations - Requirements with guidance

10 St. Hubert, Quebec (Canada)

TC 20/SC 13

Aircraft and space vehicles/Space data and information transfer systems


Paints and varnishes/Preparation of steel substrates before application of paints and related products

11 Frankfurt (Germany) TC 270 Plastics and rubber machines

11-12

Kyoto (Japan) TC 281 Fine Bubble Technology

12-13 New York (USA) TC

171/SC 2 Document management applications/Application issues

12-13 Berlin (Germany) * TC 276 Biotechnology

16-20

Winterthur (Switzerland) * TC

121/SC 3 Anaesthetic and respiratory equipment/Lung ventilators and related equipment

January 2014

12-17

Cape Town (South Africa)

TC 223 Societal security

13-16 New Delhi (India) * TC 69/SC

4 Applications of statistical methods/Applications of statistical methods in process management

23 Paris (France) TC 17/SC 3 Steel/Steels for structural purposes

28-31

Sydney (Australia) * TC 71 Concrete, reinforced concrete and pre-stressed concrete

February 2014

10-11 Paris (France) * TC 44/SC

3 Welding and allied processes/Welding consumables

10-14 Paris (France) ** TC 58/SC

4 Gas cylinders/Operational requirements for gas cylinders

11-14

Milan (Italy) ** TC 120 Leather

11-14 Milan (Italy) ** TC

120/SC 1 Leather/Raw hides and skins, including pickled pelts


120/SC 2 Leather/Tanned leather


120/SC 3 Leather/Leather products

26-27

Guilin (China) * TMB Technical Management Board

(South America) ** JTC 1/SC 35 Information technology/User interfaces

Stockholm (Sweden) ** TC 213 Dimensional and geometrical product specifications and verification

March 2014

10-14 (Brazil) ** TC 94/SC

13 Personal safety -- Protective clothing and equipment/Protective clothing

11-14


TC 118 Compressors and pneumatic tools, machines and equipment

11-14

London (United Kingdom) * TC

118/SC 3 Compressors and pneumatic tools, machines and equipment/Pneumatic tools and machines

11-14


* TC 118/SC 6

Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems

13 London (United Kingdom) * TC

118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors

13 London (United Kingdom) * TC

118/SC 4

Compressors and pneumatic tools, machines and equipment/Compressed air purity specification and compressed air treatment equipment

23-27

Warsaw (Poland) * TC 107 Metallic and other inorganic coatings

23-27 Warsaw (Poland) * TC

107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes


107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)


107/SC 7 Metallic and other inorganic coatings/Corrosion tests

23-27

Warsaw (Poland) * TC 107/SC 8

Metallic and other inorganic coatings/Chemical conversion coatings

27-28

Geneva (Switzerland) * COUNCIL Council

(Europe) ** TC 134 Fertilizers and soil conditioners

Paris (France) ** TC 274 Light and lighting

March-April 2014

31-4 Vienna (Austria) ** PC 271 Compliance management systems

1st Quarter 2014

(India) ** TC 23/SC 18

Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

(Netherlands) ** TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions

April 2014

7-11

Delft (Netherlands) * TC 6 Paper, board and pulps

7-11 Delft (Netherlands) * TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for

paper and board

7-11 Lund (Sweden) * TC 92 Fire safety

7-11 Vitoria (Brazil) * TC 102 Iron ore and direct reduced iron

7-11

Vitoria (Brazil) * TC 102/SC 1

Iron ore and direct reduced iron/Sampling

7-11 Vitoria (Brazil) * TC

102/SC 2 Iron ore and direct reduced iron/Chemical analysis

7-11 Vitoria (Brazil) * TC

102/SC 3 Iron ore and direct reduced iron/Physical testing

7-11 Bologna (Italy) * TC

110/SC 4 Industrial trucks/Rough-terrain trucks

7-11

Amsterdam (Netherlands)

* TC 161 Control and protective devices for gas and/or oil burners and appliances

8-9 (Japan) ** TC 199 Safety of machinery

8-10 (Brazil) ** TC 67/SC

2

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems

9-11

Jeju (Korea, Republic of) * TC 112 Vacuum technology

14-15

Hong Kong (Hong Kong, China)

* JTC 1/SC 27

Information technology/IT Security techniques

23-24 (Europe) ** TC 167 Steel and aluminium structures

24-25 Bangkok (Thailand) ** TC 34 Food products

Berlin (Germany) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals

Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

May 2014

5-9 Washington, D.C (USA) * TC 46 Information and documentation

5-9 Washington, D.C (USA) * TC 46/SC

9 Information and documentation/Identification and description

5-9 Washington, D.C (USA)

* TC 46/SC 11

Information and documentation/Archives/records management

5-10

St. Petersburg, Florida (USA) * TC 96 Cranes

8 Santa María de Lamas (Portugal) ** TC 87 Cork

8 Wiesbaden (Germany) * TC 226 Materials for the production of primary aluminium

9-16

London (United Kingdom) * TC 10 Technical product documentation

9-16


* TC 10/SC 1

Technical product documentation/Basic conventions

9-16

London (United Kingdom) * TC 10/SC

6 Technical product documentation/Mechanical engineering documentation

12-16 Milan (Italy) ** TC 39/SC

2 Machine tools/Test conditions for metal cutting machine tools

12-16


TC 68/SC 4

Financial services/Securities and related financial instruments

12-16 Zhangjiajie (China) ** TC 195 Building construction machinery and equipment

12-16 Zhangjiajie (China) ** TC

195/SC 1 Building construction machinery and equipment/Machinery and equipment for concrete work

14-16 Rosslyn (USA) ** TC 145 Graphical symbols

14-16

Rosslyn (USA) ** TC 145/SC 1

Graphical symbols/Public information symbols

14-16 Rosslyn (USA) ** TC

145/SC 2 Graphical symbols/Safety identification, signs, shapes, symbols and colours

14-16 Rosslyn (USA) ** TC

145/SC 3 Graphical symbols/Graphical symbols for use on equipment


TC 68 Financial services

15-16

West Conshohocken (Philadelphia) (USA)

* TC 119 Powder metallurgy

15-20 Berlin (Germany) * TC 34/SC

5 Food products/Milk and milk products

19-23 Berlin (Germany) ** TC 43 Acoustics

19-23 Berlin (Germany) ** TC 43/SC

1 Acoustics/Noise

19-23 Berlin (Germany) ** TC 43/SC

2 Acoustics/Building acoustics

19-24

Karuizawa (Japan) ** TC 215 Health informatics

20-21

Prague (Czech Republic) * TC 122 Packaging

21-22 (USA) ** TC 22/SC

3 Road vehicles/Electrical and electronic equipment

23 Toronto (Canada) * TC 268 Sustainable development in communities

23-24 Beijing (China) ** TC 24/SC

4 Particle characterization including sieving/Particle characterization

26-29

Kyoto (Japan) * TC 249 Traditional chinese medicine

27-30 (USA) ** TC 156 Corrosion of metals and alloys

June 2014

1-6 (Sweden) ** TC 127 Earth-moving machinery

4-5 Geneva (Switzerland) * TMB Technical Management Board

5-6 Berlin (Germany) * TC 211 Geographic information/Geomatics

9-14

Moscow (Russian Federation)

* TC 85/SC 2

Nuclear energy, nuclear technologies, and radiological protection/Radiological protection

16-20

Incheon (Korea, Republic of)

* TC 121 Anaesthetic and respiratory equipment

17-18 Stockholm (Sweden) * TC 29/SC

10 Small tools/Assembly tools for screws and nuts, pliers and nippers

17-18 Berlin (Germany) * TC 220 Cryogenic vessels

23-27

Washington, D.C (USA) ** TC 34/SC

9 Food products/Microbiology

23-27


* TC 193 Natural gas

Düsseldorf (Germany) ** TC 17/SC

17 Steel/Steel wire rod and wire products

London (United Kingdom) ** TC

193/SC 1 Natural gas/Analysis of natural gas

July 2014

8-11

Boulder (USA) * REMCO Committee on reference materials

September 2014

8-9 Madrid (Spain) * JTC 1/SC 22

Information technology/Programming languages, their environments and system software interfaces

8-9 Rio de Janeiro (Brazil) * TMB Technical Management Board

8-12

Paris (France) ** TC 108/SC 5

Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems

10-12

Rio de Janeiro (Brazil) * GA General Assembly

13 Rio de Janeiro (Brazil) * COUNCIL Council

18-19

Manchester (United Kingdom) ** TC 24/SC

4 Particle characterization including sieving/Particle characterization

22-26

Honolulu, Hawaii (USA)

** TC 61/SC 10

Plastics/Cellular plastics

22-26

Durban (South Africa) ** TC 146 Air quality

22-26

Durban (South Africa) ** TC

146/SC 1 Air quality/Stationary source emissions

22-26

Durban (South Africa) ** TC

146/SC 6 Air quality/Indoor air

24-25

Geneva (Switzerland)

* CASCO Committee on conformity assessment

25 Chicago (USA) * TC 79/SC 11 Light metals and their alloys/Titanium

Stockholm (Sweden) ** TC 17/SC 11 Steel/Steel castings

(USA) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis

Milan (Italy) ** TC 39/SC 4

Machine tools/Woodworking machines

Seattle (USA) ** TC 89 Wood-based panels

Montreal (Canada) ** TC 213 Dimensional and geometrical product specifications and verification

3rd Quarter 2014

London (United Kingdom) ** TC 48 Laboratory equipment

2nd-3rd Quarter 2014

Ljimuden (Netherlands) ** TC 17/SC

9 Steel/Tinplate and blackplate

October 2014

5-10 Berlin (Germany) ** TC 215 Health informatics

14-16

Suzhou (China) * TC 164/SC 5

Mechanical testing of metals/Fatigue testing

15 Suzhou (China) * TC 164/SC 4

Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

15-16 Suzhou (China) * TC

164/SC 2 Mechanical testing of metals/Ductility testing

16 Suzhou (China) * TC 164/SC 3 Mechanical testing of metals/Hardness testing

17 Suzhou (China) * TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

20-24

Nunspeet (Netherlands)

TC 149/SC 1

Cycles/Cycles and major sub-assemblies

20-24 Berlin (Germany) * TC 190 Soil quality

20-24 Berlin (Germany) * TC

190/SC 1 Soil quality/Evaluation of criteria, terminology and codification


190/SC 2 Soil quality/Sampling

20-24

Berlin (Germany) * TC 190/SC 3

Soil quality/Chemical methods and soil characteristics


190/SC 4 Soil quality/Biological methods


190/SC 5 Soil quality/Physical methods


190/SC 7 Soil quality/Soil and site assessment

22-23

Tokyo (Japan) * TC 79/SC 2

Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

23-24 (South Africa) ** TC 178 Lifts, escalators and moving walks

Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables

Toronto (Canada) ** TC 59 Buildings and civil engineering works

Tokyo (Japan) ** TC 79/SC 5

Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

Prague (Czech Republic) ** TC 135 Non-destructive testing

November 2014

3-7 Cape Town (South Africa) ** TC 45 Rubber and rubber products

4th Quarter 2014

(Portugal) ** TC 34/SC 4 Food products/Cereals and pulses

2nd Semester 2014

Madrid (Spain) ** TC 34/SC 7

Food products/Spices, culinary herbs and condiments

Month unknown 2014

(Australia) ** TC 17/SC 1 Steel/Methods of determination of chemical composition

(Brazil) ** TC 28 Petroleum products and lubricants

Beijing (China) ** TC 36 Cinematography

(Germany) ** TC 37 Terminology and other language and content resources

(Japan) ** TC 44 Welding and allied processes

Nairobi (Kenya) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(United Kingdom) ** TC 142 Cleaning equipment for air and other gases

February 2015

3-13


* TC 213 Dimensional and geometrical product specifications and verification

St. Petersburg, Florida (USA) ** TC 115 Pumps

1st Quarter 2015

Foshan (China) ** TC 107 Metallic and other inorganic coatings

Foshan (China) ** TC 107/SC 3

Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

Foshan (China) ** TC 107/SC 4

Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

April 2015

24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board

25 Atlanta (USA) ** TC 6 Paper, board and pulps

(France) ** TC 29 Small tools

(France) ** TC 29/SC 9

Small tools/Tools with cutting edges made of hard cutting materials

Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances

(Europe) ** TC 215 Health informatics

May 2015

18-22

London (United Kingdom) ** TC 4 Rolling bearings

June 2015

Beijing (China) ** TC 46 Information and documentation

2nd Quarter 2015

(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments

September 2015

14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification

3rd Quarter 2015

Sao Paulo (Brazil) ** TC 215 Health informatics

November 2015

(China) ** JTC 1 Information technology

Month unknown 2015

(South Africa) ** REMCO Committee on reference materials

(Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products

(USA) ** TC 27 Solid mineral fuels

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products

(Russian Federation) ** TC 96 Cranes

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom) ** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

(China) ** TC 274 Light and lighting

February 2016

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

April 2016

Seoul (Korea, Republic of) ** TC 161 Control and protective devices for gas and/or oil burners and

appliances

(Australia) ** TC 178 Lifts, escalators and moving walks

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Russian Federation) ** REMCO Committee on reference materials

(Australia) ** TC 44 Welding and allied processes

standards published - sutniso 27509:2012/cor 1:2013 petroleum and natural gas industries — compact...

Documents