standards organisation of nigeria act · pdf file2013 edition for by standards organisation of...
TRANSCRIPT
2013 EDITION
for by
STANDARDS ORGANISATION OF NIGERIA ACT
ARRANGEMENT OF SECTIONS
Standards Organisation of Nigeria
1. Establishment of the Standards Organisation of Nigeria.
2. Power of the Minister to give directives to the Organisation.
3. The Standards Council of Nigeria.
4. Functions of the Council, etc.
5. Functions of the Organisation.
6. Standards library.
7. Power to charge for services.
8. Qualification and experience of Director-General.
9. Director-General to be administrative head of Organisation.
10. Special responsibilities of the Director-General.
11. Number of Directors and their duties.
2013 EDITION
for by
Nigerian Industrial Standards, etc.
12. Procedure for establishment of industrial standards.
13. Standards to be known as Nigerian Industrial Standards.
14. Certification marks.
15. Offences in relation to standards.
16. Power of the Minister to declare established standards as binding.
17. Power of Director-General in relation to hazardous products.
Offences: General
18. Power to enter premises and obtain information.
19. Offences.
20. Offences by bodies corporate.
Miscellaneous and supplementary
21. Reports.
2013 EDITION
for by
22. Power to make test purchases.
23. Power to make rules.
24. Interpretation.
25. Short title.
SCHEDULE Supplementary provisions relating to the Council
STANDARDS ORGANISATION OF NIGERIA ACT An Act to establish the Standards Organisation of Nigeria to standardize methods and products in Nigerian
industries and to provide for other matters connected thereto.
[1st January, 1970] [Commencement.]
Standards Organisation of Nigeria 1. Establishment of the Standards Organisation of Nigeria
(1) There is hereby established a body to be known as the Standards Organisation of Nigeria.
(2) The Organisation shall be a body corporate with perpetual succession and a common seal, and may sue and be sued in its corporate name.
(3) The Organisation shall consist of-
(a) Director-General of Standards;
2013 EDITION
for by
(b) Directors;
(c) Secretary of the Organisation; and
(d) such other staff as may be required to assist the Director-General in the performance of the duties
of the Organisation under this Act.
(4) The Director-General shall be appointed by the President on the recommendation of the Minister.
(5) The appointment, remunerations and other conditions of service of the Directors and other staff of the Organisation shall be as determined or prescribed by the Council after consultation with the
Federal Civil Service Commission.
2. Power of the Minister to give directives to the Organisation
(1) Subject to the provisions of this Act, the Minister may give general or special directives to the
Organisation and it shall be the duty of the Organisation to comply with and give effect to any such directives.
(2) The Organisation shall give to the Minister such information and returns relating to its activities as
the Minister may, from time to time, require.
3. The Standards Council of Nigeria (1) There shall be as the governing body of the Organisation a council to be known as the Standards
Council of Nigeria.
(2) The provisions of the Schedule to this Act shall have effect with respect to the constitution and procedure of the Council and the other matters therein mentioned.
4. Functions of the Council, etc.
2013 EDITION
for by
(1) The functions of the Council shall be-
(a) to advise the Federal Government generally on the national policy on standards, standards specifications, quality control and metrology;
(b) to designate, establish and approve standards in respect of metrology, materials, commodities,
structures and processes for the certification of products in commerce and industry throughout Nigeria;
(c) to provide the necessary measures for quality control of raw materials and products in conformity
with the standard specification;
(d) to determine the overall policy of the Organisation, in particular with regard to the financial, operational, and administrative programmes of the Organisation and to ensure the implementation
of the said policy; and
(e) to carry out other functions imposed on it under this Act or any other written law.
(2) Subject to this Act, the Minister may give the Council directions of a general character or relating
generally to particular matters (but not to any individual or case) with regard to the exercise by the Council of its functions, and it shall be the duty of the Council to comply with the directions.
5. Functions of the Organisation
(1) Subject to subsection (1) of section 4, the Organisation shall carry out the following functions, that
is-
(a) to organise tests and do everything necessary to ensure compliance with standards designated and approved by the Council;
2013 EDITION
for by
(b) to undertake investigations as necessary into the quality of facilities, materials and products in Nigeria, and establish a quality assurance system including certification of factories, products and
laboratories;
(c) to ensure reference standards for calibration and verification of measures and measuring instruments;
(d) to compile an inventory of products requiring standardisation;
(e) to compile Nigerian standards specifications;
(f) to foster interest in the recommendation and maintenance of acceptable standards by industry and
the general public; (
(g) to develop methods for testing of materials, supplies and equipment including items purchased for
use of departments of the Government of the Federation or a State and private establishments;
(h) to register and regulate standards marks and specifications;
(i) to undertake preparation and distribution of standards samples;
(j) to establish and maintain such number of laboratories or other institutions as may be necessary for the performance of its functions under this Act;
(k) to compile and publish general scientific or other data-
(i) resulting from the performance of its functions under this Act; or
2013 EDITION
for by
(ii) from other sources when such data are of importance to scientific or manufacturing interests
or to the general public and are not available elsewhere;
(l) to advise departments of the Government of the Federation or a State on specific problems relative to standards specifications:
(m) to sponsor such national and international conferences as it may consider appropriate;
(n) to co-ordinate all activities relative to its functions throughout Nigeria and to co-operate with
corresponding national or international organisations in such fields of activity as it considers necessary with a view to securing uniformity in standards specifications; and
(0) to undertake any other activity likely to assist in the performance of the functions imposed on it
under this Act.
(2) The Organisation shall undertake such research as may be necessary for the performance of its
functions under this Act and for that purpose it shall have power to make use of research facilities available in other institutions, whether public or private upon such terms and conditions as may be
agreed upon between the Organisation and the institution concerned.
6. Standards library
The Organisation shall assemble, maintain and extend a collection of books and publications and such other matter as it considers appropriate for a standards library of the highest standing and may make the
facilities of the library available to such categories of persons as it thinks fit and upon such terms and conditions as it considers necessary.
7. Power to charge for services
For all comparisons, tests or investigations performed by the Organisation under this Act, except those performed for the Government of the Federation or a State, or such other public bodies or institutions as
2013 EDITION
for by
may be approved by the Council, a fee sufficient in each case to compensate the Organisation for the
entire cost of the service rendered shall be charged according to a scale specified in rules made for that purpose by the Council.
8. Qualification and experience of Director-General
Any person who may be appointed as the Director-General shall have such qualifications and experience
as are appropriate for a person required to perform the functions conferred on the Director-General by or under this Act.
9. Director-General to be administrative head of Organisation
The Director-General shall be the chief executive of the Organisation and, subject to the Council's
directives on financial, operational and administrative programmes, he shall be free to manage the Organisation in accordance with this Act and the Council shall not interfere with his methods or with the
manner in which he employs the material and human resources of the Organisation in order to obtain
results in accordance with this Act.
10. Special responsibilities of the Director-General
Without prejudice to the generality of section 9 of this Act, the Director-General shall have responsibility for-
(a) advising the Council in the formulation, implementation and review of national policies and
programmes pertaining to standardisation, quality control of products, science of measurement and all matters relating to metrology;
(b) co-ordinating the activities of the Directors appointed under this Act;
2013 EDITION
for by
(c) initiating the investigations to be conducted by the Organisation pursuant to the powers conferred
by section 5 (l) (b) of this Act;
(d) representing the Organisation at national and international levels in all maters relating to standardisation, quality control and metrology; and
(e) enforcing standards and discharging the powers and duties of the Organisation.
11. Number of Directors and their duties
The number of Directors to be appointed pursuant to this Act shall be determined by the Council but such Directors shall be responsible to the Director-General and shall carry out such duties as may be
determined by the Director-General.
Nigerian Industrial Standards, etc.
12. Procedure for establishment of industrial standards
(1) Whenever the Council intends to establish industrial standards in pursuance of subsection (1) (b) of
section 4 of this Act, it shall do so in accordance with the provisions of this section.
(2) Before establishing any industrial standard in pursuance of this section, the Council shall-
(a) inform all parties having, in its opinion, substantial interests in the industrial standard in question;
(b) thereafter constitute a committee to inquire into all the relevant aspect of the matter and make a report thereon, and in constituting the said committee, the Council shall ensure as wide a
representation on the committee as possible including, where appropriate, representatives of the parties herein referred to.
2013 EDITION
for by
(3) After considering the report of the committee, the Council may establish the industrial standard if, in
its opinion, that standard is of significance to the national economy and otherwise conforms with the objectives of this Act.
(4) The Council shall, in order to ensure that any industrial standard established under this section is
still appropriate, have it reviewed from time to time and at least not less than once in every three years.
(5) The Council shall have power to revise or revoke any industrial standard established under this
section, and for that purpose, subsections (2) and (3) of this section shall apply in relation to the revision or revocation of an industrial standard as they apply in relation to the establishment
thereof.
13. Standards to be known as Nigerian Industrial Standards
(1) The industrial standards established in pursuance of section 12 of this Act shall be called Nigerian
Industrial Standards.
(2) Industrial standards other than those established in pursuance of section 12 of this Act shall not be called Nigerian Industrial Standards.
14. Certification marks
(1) Where the Council, after the receipt of the report of a committee set up in accordance with the
provisions of subsection (2) of section 12 of this Act, is satisfied that an item of manufacture is of particular importance or significance to the national economy, it may permit the manufacturer
thereof (in this Act referred to as the "permitted manufacturer") to affix a special certification mark showing that the item of manufacture is one of those falling under the Nigerian Industrial Standards.
(2) The Council may charge such fee as it thinks appropriate for every permit issued under this section.
2013 EDITION
for by
(3) The Council may revise, reallocate or revoke any permit issued under subsection (1) of this section in accordance with the procedure laid down in that subsection and the issue, revision, reallocation or
revocation of every such permit shall be notified in the Federal Gazette.
(4) For the purpose of this section, the references to item of manufacture include references to the packages, containers and invoices relative thereto.
15. Offences in relation to standards
(1) Any person, other than the permitted manufacturer, who makes or sells or exposes for sale or uses
for the purpose of advertising any material or document on or in which is portrayed-
(a) an industrial standard in any way resembling or purporting to be any of the Nigerian Industrial Standards established in pursuance of this Act; or
(b) a certification mark resembling or purporting to be a certification mark issued in pursuance of section 14 of this Act, shall be guilty of an offence and on conviction liable to a fine not exceeding NI
,000 or to imprisonment for a term not exceeding one year or to both such fine and imprisonment.
(2) Where a person is convicted under this section, the court may make such order as to the forfeiture or destruction of the material or document in issue at it may think appropriate in the circumstances.
16. Power of the Minister to declare established standards as binding
(1) The Minister may from time to time on the recommendation of the Council by-
(a) Order published in the Federal Gazette; or
(b) publication in any two national dailies having nation-wide circulation; or
2013 EDITION
for by
(c) notice served on any affected manufacturer, declare that an industrial standard established under section 12 of this Act shall be binding.
(2) Any industrial standard declared and published in the Federal Gazette by virtue of subsection (1) of
this section shall be known as "Mandatory Industrial Standard".
(3) It shall be the duty of every manufacturer of any item of manufacture in respect of which a mandatory industrial standard has been declared to ensure that the item complies with (or was
manufactured in accordance with) such standard which is for the time being in force.
(4) If any item of manufacture does not comply with a mandatory industrial standard, and that item is sold or delivered to any person with a view to its being sold to the public-
(a) the manufacturer of the item; and
(b) any person who sells, or is concerned in the sale of, the item knowing that it does not comply with such standard,
shall be guilty of an offence under this Act and shall be liable on conviction-
(i) in the case of the manufacturer, to a fine not less than N 50,000 but not exceeding
N100,000or to imprisonment for a term not exceeding five years or to both such fine and imprisonment;
(ii) in the case of a seller, to a fine not less than N 5,000 but not exceeding N10,000 or to
imprisonment for a term not exceeding two years or to both such fine or imprisonment.
(5) If any item of manufacture does not comply with a mandatory industrial standard, and that item is sold or delivered to any person with a view to its being sold to the public, the manufacturer of that
2013 EDITION
for by
item shall be guilty of an offence under this Act and shall be liable on conviction to a fine not
exceeding NI ,000 or to imprisonment for a term not exceeding one year or to both such fine and imprisonment.
(6) In any criminal proceedings commenced against any person under this section, the production of a
certificate signed by the Director-General or any other person duly authorised by the Director-General stating that an item of manufacture does not comply with the applicable mandatory
industrial standard and describing the nature of the failure to comply with the mandatory industrial standard shall be sufficient evidence of such failure to comply.
(7) For the purposes of the trial of any person charged with an offence under this section, any item of
manufacture bearing the name or mark of that person shall, unless the contrary is proved, be presumed to have been manufactured by that person and the item shall be presumed to have been
produced by him in the form in which it was found offered for sale.
(8) Where any person is convicted of an offence under this section, the court may make such order as
to the forfeiture or destruction of the item of manufacture in question as it may think appropriate in the circumstances.
17. Powers of Director-General in relation to hazardous products
(1) The Director-General may, upon being satisfied that the quality, purity or potency of any product
(whether or not the subject of a mandatory industrial standard) is such as to be detrimental or hazardous to life and property, apply to the magistrate's court having jurisdiction in the area for an
order-
(a) to seize, destroy or prohibit any person from selling or offering for sale such product; or
(b) seal up the premises where such product is manufactured or stored; or
2013 EDITION
for by
(c) direct the manufacturer to rectify the deficiency in the case of low product.
(2) The Court may order that any product seized which in its opinion is hazardous or injurious to life
shall be destroyed or disposed of in such manner as it thinks tit.
Offences: General
18. Power to enter premises and obtain information
(1) For the purposes of carrying out the functions of the Organisation under this Act, the Director-General and any other officer or servant of the Organisation authorised by the Director in writing-
(a) shall have a right of access at all times to any building or other premises where an industrial or commercial undertaking is being carried on; and
(b) may by notice in writing served on any person carrying on an industrial or commercial undertaking
require that person to furnish in such form as he may direct information on such matters as may be
specified by him.
(2) Any article or item seized under this Act shall be kept or stored in such a place as the Director-General may direct and shall be returned to the owner if the court refuses to order forfeiture or
destruction under section 17 (2) of this Act.
(3) A person required to furnish returns pursuant to subsection (1) of this section shall within two months from the notice comply with the notice.
19. Offences
(1) If any person required to furnish returns pursuant to section 18 (1) of this Act fails to furnish those
returns as required under this Act, he shall be guilty of an offence and liable on conviction to a fine not exceeding N400 or imprisonment for a term not exceeding six months or to both.
2013 EDITION
for by
(2) If a person in purported compliance with a requirement to furnish returns as aforesaid knowingly or recklessly makes any statement in the return which is false in a material particular, he shall be
guilty of an offence and liable on conviction to a fine not exceeding N 200 or imprisonment for a term not exceeding three months or to both.
(3) Any person who wilfully obstructs, interferes with, assaults or resists any officer or servant of the
Organisation in the execution of his duty under this Act or who aids, invites, induces or abets any other person to obstruct, interfere with, assault or resist any such officer or servant, shall be guilty
of an offence and liable on conviction to a fine not exceeding N 200 or imprisonment for a period not exceeding three months or to both.
20. Offences by bodies corporate
Where an offence under this Act which has been committed by a body corporate is proved to have been
committed with the consent or connivance of, or to be attributable to any neglect on the part of any
director, manager, secretary or other official of the body corporate, or any person purporting to act in any such capacity, he, as well as the body corporate, shall be deemed to be guilty of that offence and shall be
liable to be proceeded against and punished.
Miscellaneous and supplementary
21. Reports
(1) The Council shall as soon as possible after the end of each year submit to the Minister a report on the activities of the Council and the Organisation during the last preceding year.
(2) The Organisation may from time to time publish reports on any of its activities and when such
reports are published the Organisation shall-
2013 EDITION
for by
(a) distribute copies thereof free to departments of the Government of the Federation or a State and to
such other bodies as may be approved by the Council; and
(b) where appropriate, make copies available for sale to the public and other interested parties, and such reports shall be in addition to any other publication made by it under this Act.
22. Power to make test purchases
The Director-General or any other officer of the Organisation designated in that behalf shall have power to
make such purchases of goods as may appear expedient for the purpose of determining whether or not the provisions of this Act are being complied with.
23. Power to make rules
(1) The Council may make rules, not inconsistent with this Act, for the general and efficient conduct of
the functions of the Organisation.
(2) No rules under subsection (1) of this section shall be made by the Council without the prior approval
of the Minister, and thereafter they shall be published in the Federal Gazette.
24. Interpretation
(1) In this Act, unless the context otherwise requires-
"chairman" means the chairman of the Council;
"Council" means the Standards Council of Nigeria set up under section 3 of this Act;
"certification mark" means the special certification mark issued to a permitted manufacturer;
2013 EDITION
for by
"Director-General" means the Director-General of Standards appointed in pursuance of section 1 of this
Act;
"member" means a member of the Council and includes the chairman;
"Minister" means the Minister for Industries;
"Nigerian Industrial Standards" means the industrial standards established by the Council in pursuance of this Act;
"Organisation" means the Standards Organisation of Nigeria established by section 1 of this Act;
"permitted manufacturer" has the meaning assigned under subsection (1) of section 14 of this Act;
"State" means a State of the Federation.
(2) In this Act a reference to "officer or servant of the Organisation" is a reference to any person appointed in pursuance of section 1 of this Act.
(3) In this Act, unless the context otherwise requires, a reference to a numbered section is a reference
to the section so numbered in this Act.
25. Short title
This Act may be cited as the Standards Organisation of Nigeria Act.
SCHEDULE
2013 EDITION
for by
[Section 3 (2).]
Supplementary provisions relating to the Council
Membership 1. (1) Subject to this Schedule, the Council shall consist of seventeen members to be appointed by the
Minister and, apart from the chairman and the Director, shall comprise the following-
(a) one representative from each of the following, that is-
(i) the Federal Ministry of Agriculture and Rural Development;
(ii) the Ministry of Defence;
(iii) the Federal Ministry of Health;
(iv) the Federal Ministry of Commerce;
(v) the Federal Ministry of Transport; and
(vi) the Federal Ministry of Works and Housing,
so however that when appointing a person to represent a Ministry the Minister may appoint a person from
any statutory corporation for which that Ministry has overall control or responsibility to represent such Ministry;
(b) one representative from each of the following fields of activity appointed by the Minister after
consultation with the appropriate body (if any) in each case, that is-
2013 EDITION
for by
(i) university education and research;
(ii) chambers of commerce, industry and mines;
(iii) engineering and engineering consultancy services;
(iv) processing and manufacturing industry;
(v) construction industry;
(vi) employers' associations;
(vii) consumers' associations; and
(c) one person appearing to the Minister to represent interests or fields of activity not otherwise
represented.
(2) The Director-General shall be a member of the Council and the chairman of the Council shall be the
Director-General of the Federal Ministry of Industry.
(3) The President may by order published in the Federal Gazette increase or reduce or otherwise vary the composition of the membership of the Council.
Terms of service 2. Subject to paragraphs 3 and 4 of this Schedule, a member of the Council shall hold office for a
period of four years from the effective date of the instrument of his appointment or his appointment, as the case may be.
3. Without prejudice to section 11 of the Interpretation Act (which provides, among other things, for
the removal of appointees by the person who appointed them) a member of the Council shall cease to hold office if he resigns his office by a notice in writing signed by him and served on the Minister.
2013 EDITION
for by
4. A person who ceases to hold office as member of the Council shall be eligible for reappointment.
5. References in paragraphs 2 to 4 above to a member of the Council do not include references to the chairman, the Director, or any person appointed under paragraph 1 (1) (a) above.
Proceedings
6. Subject to this Act and section 27 of the Interpretation Act (which provides for decisions of a statutory body to be taken by a majority of its members and for the chairman to have a second or
casting vote), the Council may make standing orders regulating the proceedings of the Council or any committee thereof.
7. The quorum of the Council shall be seven and shall include at least three of the persons mentioned
in paragraph 1 (1 ) (b) to (d) of this Schedule, and the quorum of any committee of the Council shall be determined by the Council.
8. The Council shall elect a member to be deputy-chairman of the Council for such period as the Council may determine, so however that a deputy-chairman who ceases to be a member shall cease
to be deputy-chairman.
9. At any meeting of the Council the chairman or in his absence the deputy-chairman shall preside, but if both are absent the members present at the meeting shall elect one of their number to preside at
the meeting.
10. The Council shall meet not less than once every three months and on such other occasions as may be necessary.
11. Subject to paragraph 10 above and any standing orders of the Council, the Council shall meet
whenever it is summoned by the chairman and before summoning a meeting the chairman shall direct the secretary to give at least fourteen days' notice of the meeting to each member; and if the
2013 EDITION
for by
chairman is required to do so by notice given to him by not less than seven other members, he shall
summon a meeting of the Council in the manner aforesaid but to be held within twenty days from the date on which the notice is so given.
12. Where the Council desires to obtain the advice of any person on a particular matter, the Council may
co-opt him as a member for such period as it thinks fit, but a person who is a member by virtue of this paragraph shall not be entitled to vote at any meeting of the Council and shall not count
towards a quorum.
13. Notwithstanding anything in paragraphs 6 to 12 above, the first meeting of the Council shall be summoned by the Minister, who may give such directions as he thinks fit as to the procedure which
shall be followed at that meeting.
Committees 14. (1)The Council may appoint such technical and project committees as it thinks fit to deal with specific
materials or group of materials or topics or such other tasks as the Council may direct any such
committee to undertake.
(2) Each such committee shall be presided over by a member of the Council and shall be made up of such number of experts, not necessarily members of the Council, as the Council may determine in
each case.
15. Subject to its standing orders, the Council may appoint such other committees as it thinks fit, but the decision of a committee appointed under this paragraph shall be of no effect until it is confirmed
by the Council.
Miscellaneous 16. The validity of any proceedings of the Council or any committee thereof shall not be affected-
(a) by any vacancy in the membership of the Council or any committee; or
2013 EDITION
for by
(b) by any defect in the appointment of any such member; or
(c) by reason that a person not entitled to do so took part in the proceedings. 17. A person shall not by reason only of his membership of the Council be treated as holding an office of
emolument under the Government of the Federation or a State.
SUBSIDIARY LEGISLATION List of Subsidiary Legislation
1. Mandatory Industrial Standards Order (18th April 1978).
2. Mandatory Industrial Standards Order (28th August 1989).
MANDATORY INDUSTRIAL STANDARDS ORDER
[L.N. 21 of 1978.] under section 16
[ 18th April, 1978] [ Commencement.]
1. Declaration of mandatory Industrial Standards
The Industrial standard specified in the second column of the Schedule hereto is hereby declared mandatory industrial standard in respect of the commodity specified in the first column thereof.
2. Short title
This order may be cited as the Mandatory Industrial Standards Order. SCHEDULE
Specification of Mandatory Industrial Standards
NIS 31 : 1974
2013 EDITION
for by
NIS 11 : 1974
MANDATORY INDUSTRIAL STANDARDS ORDER 1989 Under section 12
Commencement: 28th August 1989
1. The industrial standards specified in the second column of the Schedule to this Order are hereby
declared mandatory industrial standards in respect of the commodities or processes specified in the first column thereof.
2. This Order may be cited as the Mandatory Industrial Standards Order.
SCHEDULE OF STANDARDS APPROVED BY THE STANDARDS ORGANIZATION OF NIGERIA
Commodity or Process Specification of Mandatory
Industrial Standards
Toilet Tissue paper NIS : 015 : 1978
UDC : 676 : 43
Method for the determination of Fastness of coloured
Textiles to Rubbing
NIS : 77 : 1978
UDC : 677 : 016 : 622
Method for the determination of Colour Fastness to perspiration
NIS : 51 : 75
UDC : 663.5
PVC-Insulated Cables (Non Armoured) for Electric Power and Lighting
NIS : 172 : 1983
UDC : 621.315.2.61.623
2013 EDITION
for by
Safety Matches NIS : 01 : 1980
UDC : 662.53
Liquified Petroleum Gas Cylinder : Regulators and Valves NIS : 220 : 1985
UDC : 66.076. 621.646.4
Refillable Liquified Petroleum Gas Containers NIS : 69 : 1985
UDC : 66.076.
ADDENDUM
GENERAL INDEX TO THE STANDARDS APPROVED BY THE STANDARDS ORGANIZATION OF
NIGERIA
AGRICULTURE
AGRICULTURAL MACHINES IMPLEMENTS AND EQUIPMENT
1 Standard for Agricultural Engineering Machinery Test Code for Agricultural Tillage Disc
NIS 318 : 1997
2 Standard for Agricultural Engineering Machinery Test Code for Maize Sheller
NIS 319 : 1997
3 Standard for Agricultural Engineering Machinery Test Code
for Grain and seed Cleaner
NIS 320: 1997
4 Standard for agricultural engineering machinery test code
for groundnut Sheller
NIS 321: 1997
5 Standard for agricultural engineering machinery test code
for concave disc (Part 1 & 2)
NIS 322-1.2: 1997
2013 EDITION
for by
FERTILIZERS
1 Specification for fertilizer types, packaging and labelling NIS 106:1078
2 Method of analysis of fertilizers NIS 135:1981
3 Method of Sampling solid and liquid fertilizer NIS 080 : 1980
ANIMAL FEEDING STUFFS
1 Standards on methods of sampling and analysis of animal feds stuff
NIS 173: 1983
2 Specification for bone meal and calcined bone meal as
livestock foodstuff
NIS 264 : 2003
3 Specification for fishmeal as livestock feedstuff NIS 265 : 2003
TOBACCO, TOBACCO PRODUCTS AND RELATED EQUIPMENT
1 Specification for cigarette-tobacco and tobacco products NIS 463:2007
PROCESSES IN THE FOOD INDUSTRY
1 Code of hygienic practise for fast food NCP 014:2004
FOOD PRODUCT IN GENERAL
1 Standard for biscuits NIS 111: 1992
2 Standard for garri NIS 181 : 1983
3 National guidelines/levels for radio-nuclides in foods and food products
NIS 336:1997
2013 EDITION
for by
CEREALS, PULSES AND DERIVED PRODUCTS
1 Standard for wheat flour NIS 121: 1980
2 Standard for sorghum grains NIS 328 : 2003
3 Specification for custard powder NIS 335: 1997
4 Specification for soyabean grain NIS 341: 1997
5 Standard for food grade cassava starch NIS 386:2004
6 Standard for white bread NIS 975:2004
7 Standard for maize grains NIS 253 :2003
8 Standard for foods infants and children: infant formular NIS 255 : 1989
9 Standard for foods infants and children processed cereal-
based foods
NIS 256: 1989
10 Standards on foods for infants and children: canned baby foods
NIS 257: 1989
11 Standard for foods for infants and children canned baby foods
NIS 267: 1989
12 Standard for composite flour NIS 294: 1993
13 Standard for degermed (milled) maize products NIS 395:2000
14 Standard for wheat semolina NIS 396: 2000
15 Standard for rice NIS 440: 1997
16 Standard for cassava roots NIS 459: 2004
17 Standards for yam flour NIS 457: 2003
18 Standard for millet grains NIS 467 : 2003
19 Standard for whole wheat bread NIS 470: 2003
20 Standard for instant noodles NIS 471:2003
21 Standard for corn flakes NIS 472 : 2003
22 Standard for baked beans (in tomato sauce) NIS 474 : 2004
23 Standard for extruded puffed corn snacks NIS 564 : 2007
24 Specification for soyabean flour NIS 343 : 1997
2013 EDITION
for by
FRUITS, VEGETABLES
1 Specification for fresh bananas NIS 507: 2006
2 Specification for pineapples NIS 509: 2006
3 Standard for potatoes NIS 510: 2006
4 Standard for groundnuts NIS 491: 2005
5 Standard for fresh onions NIS 508: 2006
6 Standard for tomato concentrate NIS 182: 1982
7 Specification for cassava chips NIS 343 : 1997
8 Specification for cassava flour NIS 344 : 1997
MILK AND MILK PRODUCTS
1 Standard for methods of tests for milk and milk products (cow)
NIS 140: 1980
2 Standard for milk powder NIS 287:1992
3 Standard for diary cream NIS 340:1997
4 Standard for Skimmed milk NIS 347: 1997
5 Standard for liquid part 1 Cow milk NIS 183: 1984
6 Standard for butter NIS 339:1997
7 Standard for margarine NIS 243: 2000
8 Standard for mayonnaise NIS 513: 2006
9 Standard for cheese NIS 338: 1997
10 Standard for ice-cream NIS 292: 1993
11 Standard for condensed milk NIS 139: 1980
12 Standard for yoghurt NIS 337: 1997
MEAT, MEAT PRODUCTS AND OTHER ANIMAL PRODUCE
1 Standards for specification for poultry feeds NIS 259: 2003
2 Specification for pigs NIS 260: 1989
3 Standard for corn beef NIS 480: 2004
2013 EDITION
for by
4 Standard for luncheon meat NIS 481: 2004
5 Code of hygienic practise for fresh meat NCP 013:2004
6 Code of hygienic practise for vitamin A(fortificant premix) NCP 015: 2004
7 Code of hygienic practise for processed meat and poultry
products
NCP 016: 2004
8 Standard for classification of chicken, eggs and egg product
NIS 512 : 2006
9 Standard for canned fish NIS 279 : 1990
TEA, COFFEE, COCOA
1 Standard for tea NIS 228: 2003
2 Standard for soluble coffee powder NIS 229: 1987
3 Nigerian standard for soluble coffee pwder (Instant Coffee
Powder)
NIS 142: 1980
4 Standard for cocoa press cake NIS 329: 1997
5 Standard for cocoa beans NIS 468:2003
6 Standard for cocoa powder NIS 330: 1997
7 Standard cocoa butter NIS 331: 1997
BEVERAGES
1 Standard for niru NIS 050:1975
2 Standard for cocoa based beverage NIS 221: 1985
3 Standard for beer NIS 219: 2000(NIS 088:1977)
4 Replaced by NIS 235:1998 NIS 377: 1997
5 Standard on fruit drink and flavoured drinks NIS 378:1997
6 Standard for soft drinks NIS 217:1992
7 Standard for malt drinks NIS 290: 1992
8 Specification for malt extract NIS 332: 1997
9 Standard for fruit juices NIS 235: 1987
2013 EDITION
for by
10 Standard for fruit squashes and Cordials NIS 236: 1987
11 Standard for method of analysis for Margarine NIS 244: 1988
SUGAR, SUGAR PRODUCTS, STARCH
1 Standard for refined brown sugar NIS 438:2000
2 Standard for white refined sugar NIS 090:2000
3 Standards for beer NIS 088: 1977
4 Standards for plantation white sugar NIS 383: 2000
5 Standards for honey NIS 473: 2004
6 Standards for ethanol (food grade) NIS 556: 2007
EDIBLE OILS AND FATS, OILSEEDS
1 Standard for cottonseed oil NIS 389: 2000
2 Standard for sunflower oil NIS 390:2000
3 Standard for processed form of of palm oil NIS 230:2000
4 Standard for edible palm kernel oil NIS 289:1992
5 Standard for coconut oil NIS 387:2000
6 Standard for groundnut oil NIS 388: 2000
7 Standard for maize oil NIS 391: 2000
8 Standard for soya beans oil NIS 392: 2000
9 Standard for sesame seed oil NIS 393: 2000
10 Standard for rapeseed oil NIS 394:2000
SPICES AND CONDIMENTS, FOOD ADDITIVES
1 Standard for food grade salt NIS 168: 1992
2 Standard for food bouillon’s seasoning NIS 293: 1993
3 Standard for monosodium glutamate NIS 334: 2000
4 Specification for Cinnamon NIS 397: 2000
5 Specification for chillies and capsicum (whole or ground) NIS 398: 2000
2013 EDITION
for by
6 Specification for dehydrated garlic NIS 399: 2000
7 Specification for curry powder NIS 400: 2000
8 Specification for pimento(whole or ground) NIS 401 : 2000
9 Specification for black pepper (whole or ground) NIS 402: 2000
10 Specification for white pepper(whole or ground) NIS 403: 2000
11 Specification for coriander(whole or ground) NIS 404: 2000
12 Specification for thyme leaves NIS 405:2000
13 Specification for powdered garlic NIS 406 : 2000
14 Specification for dried oregano NIS 407 : 2000
15 Specification for ground nutmeg NIS 408 :2000
16 Specification for ginger NIS 409 : 2000
17 Specification for dried oregano NIS 410 : 2000
18 Methods of test for spices & condiments NIS 411: 2000
19 Standard for vitamin A (fortificant) premix NIS 475: 2004
Standard Titles Codes
ANALYTICAL CHEMISTRY
1. Specification for Water for Laboratory Use NIS 131: 1980
INORGANIC CHEMICALS
2. Specifications for Concentrated Sulphuric Acid NIS 288: 1992
3. Standard for Sodium Hydroxide (Technical Grades) NIS 137: 1982
ORGANIC CHEMICALS
4. Standard for Spirit NIS 346: 1997
5. Standard for Gum Arabic NIS 469: 2003
PRODUCTS OF THE CHEMICAL INDUSTRY
6. Standard Specifications for Aluminum Sulphate NIS 241: 1988
7. Standard for Toilet Bar NIS 516: 2006
2013 EDITION
for by
8. Specification for Toilet Soap NIS 004: 2006
9. Specification for Hard Laundry Soap NIS 005: 2006
10. Specification for Bleaching Solution for Domestic use NIS 150: 1982
11. Test Methods for Soaps (Toilets and Laundry) NIS 187: 1984
12. Test Methods for Synthetic Detergent NIS 188: 1984
13. Method for Test for Water Resistance (State Head Penetration Test)
NIS 143: 1981
14. Specification for Synthetic Detergent Powder for Laundry Purpose
NIS 057: 1974
15. Specification for Nitrocellulose-based Wood Finishes NIS 541: 2006
16. Standard for Toothpaste NIS 125: 2006
17. Standard for Shampoo NIS 305: 2004
18. Guidelines for Classification and Sampling of Cosmetics NIS 379: 1997
19. Standard for Black Soap NIS 490: 2006
20. Standard for Nail Polishing Products NIS 495: 2004
21. Standard for Hair Relaxer NIS 497: 2004
22. Standard for Hair Cream NIS 503: 2004
23. Standard for Laundry Bar NIS 517: 2006
24. Standard for Oral Hygiene Products – Oral Rinses NIS 518: 2006
2013 EDITION
for by
25. Standard for Liquid Detergent for Household Hand Dish
Washing
NIS 519: 2006
26. Standard for Herbal and Herbs Bio-Salt Tooth-Paste NIS 520: 206
27. Standard for Ethanol (Industrial Grade) NIS 521: 2006
Standards Title Codes
1. Specification for Residual Fuel Oils NIS 212: 1985
2. Specifications for Minerals Base Oil NIS 213: 1985
3. Specifications for Glass Funnels NIS 220: 1985
4. Standards for Motor Vehicle Engine Lubricating Oil NIS 370: 1997
5. Standard for Motor Vehicle Lubricating Oil NIS 372: 1997
6. Standard for Industrial Gear Lubricating Oil NIS 373: 1997
7. Standard for Hydraulic Oil NIS 371: 1997
8. Specification for two-stroke Engine Oil NIS 533: 2006
WAXES, BITUMINOUS MATERIALS AND OTHER PETROLEUM
PRODUCTS
9. Specification for Bitumen Road Emulsion (Anionic and Cationic) NIS 211: 1985
10. Specifications for Petroleum Waxes NIS 271: 1989
11. Specification for Industrial Benzene NIS 272: 1989
12. Standard for Petroleum Jellies NIS 371: 1997
13. Standard for Bitumen for Industrial Purposes NIS 523: 2006
14. Standard for Bituminous Roofing Felt NIS: 524: 2006
15. Code of Practice for the use of Bitumen Road NCP 019: 2006
16. Specifications for Bitumen Road Emulsion (Anionic and Cationic) NIS 526: 2006
2013 EDITION
for by
17. Standard for E 10 Automobile Fuel NIS 534: 2006
18. Specification for Gasoline (Petrol) NIS 116: 2006
19. Specification for Kerosene NIS 141: 2006
20. Specification for Gas Oil (Diesel Oil) NIS 149: 2001
21. Specification for Aviation Gasoline NIS 164: 1982
22. Specification Sampling and Analysis of Liquefied Petroleum (LP)
Glasses for Specific Use
NIS 136: 1980
23. Standard for Liquefied Petroleum Gas (LPG) NIS 555: 2007
PETROLEUM PRODUCTS AND NATURAL GAS HANDLING EQUIPMENT
23. Specification and Testing of Unfired Pressure Vessels for the
Storage of Liquefied Petroleum Gas (LPG)
NIS 419: 2000
24. Specification for refillable Liquefied Petroleum Gas (LPG) NIS 530: 2006
25. Specification for Carbon Steel Welded Horizontal Cylindrical Storage Tanks
NIS 531: 2006
26. Standard for Transportable Refillable Welded Steel Cylinder for
LPG-Periodic Qualification
NIS 532: 2006
2013 EDITION
for by
ROAD ENGINEERING
1. Specification for bitumen for road purposes. NIS 171: 1983
DOMESTIC ELECTRICAL APPLIANCIES IN GENERAL
1. Standard for safety of household and similar electrical appliances (Part 1).
NIS 349- 1:1997
2. Household and similar electrical appliance safety-pt1-general
requirement.
NIS /IEC 60335-1:2004
3. Household and similar electrical appliance safefy-pt1-particular
requirements for floor treatment machine and net treatment machines.
NIS/IEC 60335-2-
10:20044
KITCHEN EQUIPMENT
1. Standard for kitchen cabinets and filaments NIS 496: 2004
2. Standards for plastic tableware NIS 540: 2006
3. Specification for non-pressure stove. NIS 413: 2006
4. Specification for aluminum cooking utensil NIS 062: 1980
5. Household micro wave ovens- methods for measuring performance. NIS/IEC 60705: 2006
6. Household and similar electrical appliance safety-pt 2-6-particular requirement for stationary cooking ranges, hobs ovens and similar
appliances.
NIS/IEC 60335-2-6: 2005
7. Household and similar electrical appliance safety-pt 2-9-particular
requirements for grills, toasters and similar portable cooking appliances.
NIS/IEC 60335-2-9
2006
2013 EDITION
for by
8. Household and similar electrical appliance safety-pt-2-25-particular
requirements for microwave ovens, including combination microwave ovens.
NIS/IEC 60335-2-
25:2005
9. Electric cooking ranges, bobs ovens and grills for household use-methods for measuring performance.
NIS/IEC 60335:2006
10 Standards for particular requirements for refrigerators and food
freezers
ICS 361:1997
11. Household and similar electrical appliance safety-pt-2-24-particular
requirements for refrigerating appliances, ice cream appliances and ice makers.
NIS/IEC 60335-2-
24:2005
12. Specification for galvanized steel bucket for general use. NIS 029:1973
13. Specification for matchets for general use. NIS 242; 1988
13 Household and similar electrical appliance safety-pt 2-12-particular
requirements for warming plates and similar.
NIS/IEC 60335-2-
12:2002
14. Household and similar electrical appliance safety-pt 2-13-particular
requirements for kitchen machines.
NIS/IEC 60335-2-
13:2004
15. Household and similar electrical appliance safety-pt-2-14-particular requirements for kitchen machines.
NIS/IEC 60335-2-14:2002
LAUNDRY APPLIANCES
1. Standard for electric iron. NIS 103: 1978
2. Household and similar electrical appliance safety-pt 2-3-particular requirements for electric irons.
NIS/IEC 60335-2-3;2005
3 Electric irons for household or similar use method for measuring performance
NIS/IEC 60311:2006
4. Household And similar electrical appliance safety-pt 2-7-particular NIS/IEC 60335-2-7:
2013 EDITION
for by
requirements for washing machines. 2004
CLEANING APPLIANCES
1. Standard for safety of household and similar electrical appliances-
particular requirements for vacuum cleaners.
NIS 353:1997
2. Household and similar electrical appliance safety-pt 2-2-particular
requirement or vacuum cleaners and water suction cleaning appliances.
NIS/IEC 60335-2-
2:2004
DOMESTIC, COMMERCIAL AND INSUSTRIAL HEATING APPLIANCES
1. Standard for particular requirements for appliances for heating liquids.
NIS/IEC 60335-2-15:2005
2. Household and similar electrical appliance satety-pt-2-15-particular requirements for appliances for heating liquids.
NIS/IEC 60335-2-15:2005
FURNITURE
1. Specification for furniture-synthetic plastic chairs. NIS 464:2004
2.
NON TEXTILES FLOOR COVERING
1. Specification for flexible PVC flooring NIS 023;1973
2013 EDITION
for by
HOPE TEXTILES. LINEN
1. Specification for bed sheet NIS 082: 1980
2. Specifications for woven blanket NIS 563: 2007
BODY CARE EQUIPMENT
1. Standard for nylon tooth brushes. NIS 009:1973
2. Specification for nylon monofilaments used for tooth brushes. NIS 010: 1973
3. Standard for sanitary pads. NIS 291:1992
4. Household and similar electrical appliance safety-pt 2-8-particular requirements for shavers, hair clippers and similar appliances
NIS/IEC 6O335-2-8:2005
MISCELLANEOUS DOMESTIC AND COMMERCIAL EQUIPMENT
1. Standards for safety matches. NIS 01:1992
2. Standard for ball point pens. NIS 024:1979
3. Standard for ball point pens. NIS 037:1974
4. Standards for ball point pen fills. NIS 038:1974
5. Standard for ball point pen ink. NIS 039:1974
6. Standard for glass globes for hurricane lantern NIS 107: 1978
7. Standard for mosquito coils. NIS 286: 1992
8. Specification for hurricane lantern. NIS 412:2000
CONSTRUCTION MATERIALS AND BUILDING
2013 EDITION
for by
ELEMENTS OF BUILDINGS
1. Test method for aluminum roofing sheet for roofing. NIS 487:2004
2. Specification for profile aluminum roofing sheet for roofing. NIS 488:2004
STRUCTURES OF BUILDINGS
1. Loading Part 3 NCP 001-3:1973
2. Air cooled blast furnace slag coarse aggregate for concrete. NIS 158:1982
3. Specification for galvanized corrugated steel sheets. NIS 180:2003
4. Standard specification for high tensile alloy steel bars cold worked for prestnessed.
Nis 096: 1980
5. Specification for bending dimensions and scheduling of bars for the
reinforcement of concrete.
NIS 157: 1982
6. Standard method of testing fresh concrete. NIS 156: 1982
7. Methods of testing concrete NIS 012: 1974
CONSTRUCTION MATERIALS
1. Portland blast furnace cement. NIS 015:1980
2. Standard test methods for the characteristics of cement. (Part 1- Test for physical properties).
NIS 367:1997
3. Standard test methods for the characteristics of cement—part 2- Test for chemical properties.
NIS 368-2:1990
4. Standard on gypsum for industrial use. NIS 426: 2000
5. Code of practice for cement secondary packaging. (NIS 442:2003) NCP 10:2003
6. Code of care labeling of textiles using symbols (NIS 443:2003) NCP 11:2003
7. Cement:-Pt. 1: Composition, specifications and conformity criteria NIS 444-1:2003
2013 EDITION
for by
for common cements.
8. Cement:- Pt 2: Conformity evaluation. NIS 444-2:2003
9. Methods of testing cement- Chemical analysis of cement. NIS 445: 2003
10. Methods of testing cement-determination of strength. NIS 446: 2003
11. Methods of testing cement- Determination of setting time and
soundness.
NIS 447: 2003
12. Methods of testing cement- Determination of fineness NIS 448: 2003
13. Methods of testing cement- Determination of Chloride, carbon dioxide and alkaline content of cement.
NIS 449: 2003
14. Standard for precast concrete paving blocks NIS 451: 2003
15. Standard for pavements constructed with concrete paving blocks. Pt. 1: Guide for the structural design of lightly trafficked pavement.
NIS 451-1:2003
16. Methods of testing fly ash-Determination of Calcium oxide content. NIS 452: 2003
17. Methods of testing cement-pozzolanity test for pozzolanic cement. NIS 453:2003
18. Test for geometric properties of aggregate-Assessment of fineness-
Methylene blue test.
NIS 454: 2003
19. Methods of testing cement- Taking or preparing samples of cement. NIS 455:2003
20. Methods for the sampling and the testing of minerals aggregate,
sand and filler.
NIS 014: 1974
21. Schedule of unit weight of building blocks. NIS 017: 1974
22. Specification for clay bricks and blocks. NIS 018: 1974
23. Standard for asbestos cement products corrugated sheet and fitting
for roofing and cladding.
NIS 262: 1989
24. Specification for PVC vinyl asbestos floor tiles. NIS 035:1989
25. Standard for asbestos cement flat sheets. NIS 363: 1997
26. Standard for fibre reinforced roofing sheets. NIS 366: 11997
27. Standard for stabilized earth bricks. NIS 369: 1997
28. Specification for burnt building units. NIS 074: 1975
29. Standard for sand crete blocks. NIS 087: 2000
30. Concrete roofing tiles and fittings for roof covering and wall NIS BS EN 490:2004
2013 EDITION
for by
claddings-test method NIS 552: 2006
31. Concrete roofing tiles and fittings for roof covering and wall claddings-specification NIS 553:2006
NIS BS EN 491:2004
32. Specification for aggregates from natural sources for concrete. NIS 013: 1974
33. The structural use of concrete in building-part 1 NCP 001-1:1973
34. Fibre cement flat sheet (NIS 549:2006) NIS ISO 8336: 2006)
35. Fibre cement fascia board (NIS 550: 2006) NIS ISO 8336:2006
36. Product in fibre reinforcement cement- long corrugated or a symmetrical sectional sheet and fittings for roofing and claddings.
(NIS 551: 2006)
NIS ISO 390: 2006
37. Specification for bending dimensions and scheduling of bars for the reinforcement of concrete.
(NIS 551; 2006)
PROTECTION OF AND IN BUILDINGS
1. Fire tests on building materials and structures. NIS 30: 1973
INSTALLATIONS IN BUILDING
1. Standard for China wash down WC pans with horizontal outlet. NIS 304: 2004
Standards Title Code
ELECTRICAL ENGINEERING IN GENERAL
2013 EDITION
for by
1. Fire Hazard Testing Part 1-1 Guidance for Accessing the Fire
Hazard of Electro Technical Products – General Guidance
NIS/IEC 60695-1-1- 1999
2. Fire Hazard Testing Pt-1-2 Guidance for Preparation of
Requirements and Test Specifications for Accessing Fire Hazards of Electro Technical Products – Guidance for
Electronic Components
NIS/IEC 60695-1-2: 1982
3. Fire Hazard Testing-Pt-2-10: Glowing Hot Wire Based Test Methods – Glow Wire Apparatus and Common Test Procedure
NIS/IEC 60695-2-11: 2000
4. Fire Hazard Testing-Pt-10-2: Abnormal Heat-Ball Pressure Test
NIS/IEC 60695-10-2: 2003
5. Fire Hazard Testing-Pt-11-10: Test Flames-50w Horizontal and
Vertical Flame Test Methods
NIS/IEC 60695-11-10: 2003
INSULATING MATERIALS
1. Standard for PVC Insulation and Sheath for Electrical Cable NIS 153: 1982
2. Standard for PVC Insulated Cables, Electric Power and Lighting NIS 172: 1983
INSULATING FLUID
1. Standard for Low Voltage PVC Insulated Cables for Motor
Vehicles
NIS 246: 1998
2. Specification for Transformer Oils for Electrical Equipment NIS 270: 1989
3. Standard for High Voltage Ignition Cables for Automotive Use NIS 247: 1988
SUPER CONDUCTIVITY AND CONDUCTING MATERIALS
4. Determination of Resistivity of Metallic Electrical Conductor Material
NIS 114: 1979
5. Standard for Aluminum Conductors in Insulated Electric Cables and Flexible Cords
NIS 155: 1992
6. Standard on Copper Conductors in Insulated Eectric Cables
and Flexible Cords
ELECTRIC WIRES AND CABLES
7. Standard on Resistance for Copper NIS 430: 2000
8. A Guide to Electrical test for Cable Cords and Wires for NIS 356: 1997
2013 EDITION
for by
Voltages up to and Including 459/750
9. Standard for Insulated Flexible Cords and Cables NIS 357: 1997
10. Standard for Insulation Resistance Tester NIS 358: 1997
11. Winding Wires – Test Methods: Pt. 1: General NIS/IEC 60851-1: 1996
12. Winding Wires – Test Methods: Pt. 2: Determination of
Dimension. (Amendment 2006)
NIS/IEC 60851-3: 1997
13. Winding Wires –Test Methods: Pt 3: Mechanical Properties NIS/IEC 60851-3: 1997
14. Winding Wires – Test Methods: Pt-4: Chemical Properties NIS/IEC 60851-4-2005
15. Winding Wires – Test Methods – Pt. 5: Electric Properties: Amendment – 2006
NIS/IEC 60851-5: 2004
16. Winding Wires – Test Methods: Pt-6: Thermal Properties NIS/IEC 60851-6:1996
17. Specification for Particular Types of Winding Wires- Pt-1General Requirement Enameled Round Copper Wire
NIS/IEC 60317-0-2: 2005
18. Specification for Particular Types of Winding Wires – Pt.-1-General Requirement Enameled Rectangular Copper Wire
NIS/IEC 60317-0-: 2005
19. Conduit Systems for Electrical Installations – Pt-1: General
Requirement
NIS/IEC 60227-1: 2003
20. Polyvinyl Chloride Insulated Cables of Rated Voltages Up to
and Including 450/750V- Pt 1: General Requirement
NIS/IEC 60227-1: 2003
21. Wrought Aluminum for Electrical Purposes NIS 089: 1980
22. Electrical Accessories – Cable Reels for Household and Similar
Purposes
NIS/IEC 1242: 1995
23. Flame Retardant Characteristics of Electric Cables NIS 170: 1983
24. Standard for PVC Insulated (Non-Armoured) for Electric Power
and Lighting
NIS 172: 1992
25. Spark Testing of Electric Cables NIS 177: 1983
26. Specification for Galvanized Mild Steel Wire and Tape for
Armouring Cables
NIS 276: 1990
27 Standard for the Guide to the Selection of High Voltage Cables NIS 348: 1997
28. Standard for Fire-Testing Characteristics of Electric Cables NIS 351: 1997
2013 EDITION
for by
29. Standard for Test for Electric cables under Fire Conditions NIS 352: 1997
30. PVC Insulated Cables for Electricity Supply NIS 382: 1997
31. Specification for Low Frequency Cables & Wires with PVC Insulation & PVC Sheath
NIS 428: 2000
32. Specification for low frequency cables & wires with PVC Insulator and Sheath Distribution Wires
NIS 429: 2000
33. Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Pt – 1 – General Requirements
NIS/IEC 60245-1: 1998
34. Rubber Insulated Cables-rated Voltage up to and Including
450/750V – Pt – 2 – Test Method
NIS/IEC 60245-2: 1998
35. Rubber Insulated Cables-rated Voltage up to and Including 450/750V – Pt –3 – Heat Resistance Silicone Insulated Copper
NIS/IEC 60245-3: 1994
36. Rubber Insulated Cables-rated Voltage up to and Including 450/750V – Pt –4- Cords and Flexible Cables
NIS/IEC 60245-4: 2004
37. Rubber Insulated Cables-rated Voltage up to and Including 450/750V – Pt –5- Lift Cables
NIS/IEC 60245-5: 1994
38. Power Cables with Extruded Insulation and their Accessories
for Rated Voltage from IKV (Um=1.2KV) up to 30KV (Um = 36KV) – Pt. 1: Cables for Rated Voltage of 1KV (Um=1.2KV)
and 3 KV (Um = 3.6KV)
NIS/IEC 60502-1: 2004
39. Power Cables with Extruded Insulation and their Accessories
for Rated Voltage from IKV (Um = 1.2KV) up to 30KV (Um =
36KV) – Pt 2: Cables for Rated Voltage of 6KV (Um=7.2KV) up to 30KV (Um = 36KV)
NIS/IEC 60502-2: 2005
40. Power Cables with Extruded Insulation and their Accessories for Rated Voltage fro m 1KV (Um = 1.2KV) up to 30 KV (Um =
36 KV) – Pt 4: Test Requirements on Accessories on Accessories for Cables Rated Voltage from 6KV (Um = 7.2kV)
up to 30KV (Um = 36 KV)
NIS/IEC 60502-4: 2005
41. Standard Specification for Aluminum Stranded Conductor NIS 225: 1986
2013 EDITION
for by
42. Specification for Galvanized Steel Wire for Aluminum
Conductors, Steel Reinforced
NIS 233: 1987
42. Specification for Aluminum Conductors, Steel Reinforced for
Overhead Power Transmission
NIS 234: 1998
43. Standard for Raw Copper for Use for Electrical Purposes NIS 245: 1998
ELECTRICAL ACCESSORIES
44.. Specification for 13 A Switched and Unswitched Socket- Outlet NIS 486: 2004
45. Plug and Socket-Outlets for Household and Similar Properties – Pt – 1: General Requirements
NIS/IEC 60884-1: 2002
46. Plug and Socket-outlets for Household and Similar Properties
– Pt – 2 – 1 – Particular Requirements for Fused Plugs
NIS/IEC 60884 – 2: 1987
47. Plug and Sockets- Outlets for Household and Similar
Properties: Pt-2-2: Particular Requirements for Socket-Outlets for Appliances
NIS/IEC 60884-2-2: 1989
48. Plug and Sockets-Outlets for Household and Similar Properties – Pt – 2 – 3: Particular Requirements for Switched Sockets-
outlets without interlock for Fixed Installations
NIS/IEC 60884-2-3: 1989
49. Plug and Socket-Outlets for Household and similar Properties – Pt – 2 – 4-: Particular Requirements for Plugs and Sockets
for SELV
NIS/IEC 60884-2-4: 1999
50. Plugs and Socket-Outlets for Household and Similar
Properties-Pt-2-5: Particular Requirements for Adaptors
NIS/IEC 60884-2-5: 1995
51. Plugs and Socket-Outlets for Household and Similar Properties-Pt-2-6: Particular Requirements for Switched
Socket-outlets with Interlock for Fixed Electrical Installations
NIS/IEC 60884-2-6:1997
52. IEC System of plugs and socket-outlets for Household and
Similar Purposes-Pt-3: SELV Plugs and Sockets. 16A, 6V,
12V, 24V, 48V AC and DC.
NIS/IEC 60906-3: 1997
53. Switches for Appliances – Pt – 1: General Requirements NIS/IEC 61058-1: 1994
54. Switches for Household and Similar Fixed - Electrical NIS/IEC 60669-1: 2000
2013 EDITION
for by
Installations – Pt-1: 2000: - General Requirements
LAMPS AND RELATED EQUIPMENT
55. Specification for Lamps and Flash Lights NIS 465: 2004
56. Specification for Flash Lights NIS 505: 2004
57. Specification for bayonet Lamp Holder NIS 147: 1982
58. Bayonet Lamp Holders NIS/IEC 61184: 1997
NIS/IEC 60884 – 1: 2002
59. Standard for Ceiling Roses NIS 092: 1978
60. Lamp Holders for Tubular Fluorescent Lamps and Starter
Holder
NIS/IEC 60400: 2004
61. Specification for Tungsten Filament Lamps for General Service NIS 003: 1972
62. Specification for Bi-Pin Lamp Holders for Tubular Fluorescent
Lamp
NIS 218: 2008
TRANSFORMERS. REACTORS
63. Power Transformers NIS/IEC 60076-1: 2003
64. Specification for Power Transformers NIS 500: 2004
RECTIFIERS, CONVERTERS, STABILIZED POWER SUPPLY
65. Stabilized Power Supplies D.C Output – Pt – 4 – Test other
than Radio-Frequency Interference
NIS/IEC 60478-4: 1976
GALVANISED CELLS AND BATTERIES
66. Primary batteries – Pt –1 - General Requirement NIS/IEC 60086-1: 2000
67. Primary Batteries – Pt – 2 – Physical and Electrical Specifications
NIS/IEC 60086-2: 2001
68. Primary batteries – Pt – 3 – Watch Batteries NIS/IEC 60086-3: 2004
69. Primary Batteries – Pt – 4 – Safety of Lithium Batteries NIS/IEC 60086-4: 2000
70. Primary batteries – Pt – 5 – Safety of Battery with Aqueous
Electrolyte
NIS/IEC 60086-5: 2005
71. Primary Batteries – Summary of Research and Actions Limiting Risks to reverse Installations of Primary Batteries
NIS/IEC 61955
2013 EDITION
for by
72. Specification for Dry Cells and Batteries NIS 007: 1973
73. Standard for Lead-Acid Starter Batteries (Electrical Characteristics)
NIS 025: 1973
74. Specification for Distilled Water Suitable for Lead Acid
Batteries used in Motorised Vehicle
NIS 119: 1981
75. Standard for Lead Acid Starter Batteries – General
Requirements and Methods of Test
NIS 350: 1997
76. Standard for Lead-Acid Traction Batteries – General Requirement s and Test Methods
Nis 360: 1997
POWER TRANSMISSION AND DISTRIBUTION NETWORKS
77. Specification for Aluminum Stranded Conductors for Overhead Power Transmission
NIS 231: 1987
78. Specification for Stranded Conductors for over-head Power Transmission
NIS 232: 1987
79. Specification for Wood Poles NIS 006: 1980
Standards Title Code
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC AND
TELECOMMUNICATIONS EQUIPMENT
1. Switches for Household and Similar Fixed-electric Installations –
Pt- 2- 1: 2000: Particular Requirements – Electronic Switch
NIS/IEC 60669-2-1: 2002
2. Switches for Household and Similar Fixed – Electrical Installations – Pt – 2 – 2: 2000: Particular Requirements
Section 2: Remote Control Switches (RCS)
NIS/IEC 60669 – 2-2: 2000
2013 EDITION
for by
Standard Title Code
1. Standard for Vocabulary of Fundamental Concept NIS 385: 1997
2. Standard for Road Vehicles Weights Vocabularies NIS 193: 1984
3. Glossary of Terms for Paper Sack NIS 282: 1990
4. Standard for Agricultural Engineering Machinery Terminology for Tillage and Tillage Equipment
NIS 317: 1997
5. Glossary of terms used in Fertilizer Industry NIS 097: 1978
6. Black Tea-Vocabulary NIS 202: 1985
7. Cereals Vocabulary Part I NIS 295: 1985
8. Oil Code-Nomenclature NIS 208: 1985
9. Fruits Nomenclature-First List NIS 210: 1985
10. Glossary of Terms relating to Iron and Steel Making Industry NIS 109: 1979
11. Nigeria Standard Specification for Glossary of Paper Pulp and
Allied Terms
NIS 109: 1979
12. Standard of Paints and Vanishes – Part 1 – Glossary of Terms
for Paints
NIS 266: 1989
13. Specification for use of Metric Units in Construction Industry NIS 078: 1978
14. Standard for Letters Symbols NIS 384: 1997
15. Standard on Nigerian National Flag NIS 237: 1987
16. Technical Drawing Lettering NIS 120: 1980
Standard Title Code
1. Standard for Rating of Hotels and Serviced Accommodation NIS 489: 2005
2. Tourism Service –Hotels and other types of Tourism
Accommodation – Terminology
NIS ISO 18513: 2003
3. Standard for Product Liability NIS 506: 2006
2013 EDITION
for by
4. Quality Management System – Requirements NIS ISO 9001: 2000
5. Quality Management Systems – Guidelines for Performance Improvements
NIS ISO 9004: 2000
6. Quality Management System – Guidelines for Quality Plans NIS ISO 1005: 1997
7. Quality Management System – Guidelines for Quality in Project Management
NIS ISO 10006: 1997
8. Quality Management Systems – Guidelines for Configuration
Management
NIS ISO 10007: 1997
9. Quality Assurance Requirements for Measuring Equipments.
Part 1: Metrological Confirmation System for Measuring Equipment
NIS ISO 10012-1: 1992
10. Quality Assurance Requirements for Measuring Equipments –
Part 2: Guidelines for Control of Measurement Processes
NIS ISO 10012-2 1997
11. Guidelines for Quality Management System Documentation NIS ISO/TR 10014: 1998
12. Quality Management – Guidelines for Training NIS ISO 10015: 1999
13. Guidelines on the Application of ISO 9001 2000 for the Food and Drink Industry
NIS ISO 15161: 2001
14. Quality Management Systems – Particular Requirements for the Application of ISO: 9001: 2000 for Automotive Production
and Relevant Service Part Organizations
NIS ISO/TS 16949: 2000
15. Environmental Management System – Vocabulary NIS ISO 14050: 2002
16. Information to Assist Forestry Organizations in the Use of
Environmental Management System Standards ISO 14001 14004
NIS ISO/TR 14061: 1998
17. Environmental Management System – Integrating
Environmental Aspect into Product Design
NIS ISO/TR 14062: 1997
18. Guidelines for Developing Quality Manuals NIS ISO 10013: 1995
19. Data Elements and Interchange Formats – Information
Interchange – Representation of Dates and Times
NIS ISO 8601: 1998
20. Environmental Labels and Declarations – Self-Declared NIS ISO 14021: 1998
2013 EDITION
for by
Environmental Claim (Type 11 Environmental labeling)
21. Environmental Labels and Declarations – Type 1 Environmental Labeling – Principles and Procedures
NIS ISO 14024: 1998
22. Guidelines for Drafting of Standards Suitable for use for
Conformity Assessment
NIS ISO/IEC Guide 7: 1994
23. General Criteria for Suppliers Declaration of Conformity NIS ISO/IEC Guide 23: 1982
24. Methods of Indicating Conformity with Standards for Third
Party Certification Systems
NIS ISO/IEC Guide 27: 1983
25. Guidelines for Corrective Action to be taken by a Certification
Body in the Event of Misuse of its Mark of Conformity
NIS ISO/IEC Guide 27: 1983
26. General Rules for a Model Third-Party Certification System for Products 28: 1982
NIS ISO/IEC Guide 28: 1982
27. Proficiency testing by inter-laboratory comparisons Part 1: Development and Operation of Proficiency Testing Schemes
NIS ISO/IEC Guide 43-1: 1997
28. Proficiency Testing by Inter-Laboratory Comparisons Part 2: Selection and use of Proficiency Testing Schemes by
Laboratory Accreditation Bodies
NIS ISO/IEC Guide 43: 2988
29. An Approach to the Utilization of a Supplies Quality System in third-party Product Certification
NIS ISO/IEC Guide 53: 1988
30. Calibration and Testing Laboratory Accreditation System – General Requirements for Operation and Recognition
NIS ISO/IEC Guide 58: 1993
31. ISO/IEC Code of Good Practice for Conformity Assessment NIS ISO/IEC Guide 60: 1994
32. General Requirements for Assessment and Accreditation of Certification/Registration Bodies
IS ISO/IEC Guide 61: 1996
33. General Requirements for Bodies Operating Product
Certification Systems
NIS ISO/IEC Guide 65: 1995
34. Arrangements for the Recognition and Acceptance of
Conformity Assessment Results
NIS ISO/IEC Guide 68: 2000
35. Information Technology – Interpretation of Accreditation Requirements in ISO/IEC Guide 25 – Accreditation of
NIS ISO/IEC TR 13233: 1995
2013 EDITION
for by
Information Technology and Technology and
Telecommunications Testing Laboratories for Software and Protocol Testing Service
36. General Requirements for Bodied Providing Accreditation of Inspections Bodies
NIS ISO/IEC TR 17010: 1998
37. General Criteria for the Operation of various types of Bodies
Performing Inspection
NIS ISO/IEC 17020: 1998
38. General Requirements for the Competence of Testing and
Calibration of Laboratories
NIS ISO/IEC 17025: 1995
Standard Title Code
1. Standard on Hypodermic Syringes NIS 239: 1988
2. Specification for Absorbent Cotton Wool NIS 431: 2000
3. Specification for Mosquito Nets NIS 441: 2003
4. Standard for Medicated Soap NIS 515: 2006
Standard Title Code
1. Specification for Natural Mineral Water NIS 345: 2003
2. Specification for Portable Water NIS 306: 2003
3. Standards for Drinking Water Quality NIS 554: 2007
4. Alarm Systems: Part 1 – General Requirements Section Four-
code of Practice
NIS/IEC 60839-1-4: 1989
5. Specification for Safety Foot Wear NIS 263: 1989
6. Standards for Protective Helmets for Motor Cyclists NIS 068: 1975
7. Specifications for Rubber Examination Gloves NIS 462: 2004
8. Test Methods for Determining Quality Specification of
Examination Rubber Gloves
NIS 462: 2004
2013 EDITION
for by
9. Specification for Lady Black and White Shoe NIS 466: 2006
10. Specification for Nigeria Armed Forces Men’s Brown and Black Shoe
NIS 485: 2004
11. Military Specification for George’s Ceremonial Boot NIS 504: 2004
12. Specification for Bone Meal and Calcined Bone Meal as
Livestock Feedstuff
NIS 264: 2003
Standard Title Code
1. Preferred Number Basic Series more rounded Valves and Guide to their use
NIS 122
2. Code of Practice for Transport and Storage of LPG Cylinder NCP 017: 2006
3. Code of Practice for Used Vehicle Part 1 NCP 018: 2006
4. S.I Units and Recommendations for the Use of their Multiples
and of Certain Units
NIS 189: 1985
5. General Principles Concerning Quantities, Units and Symbols NIS 189: 1985
MEASUREMENT OF VOLUME
6. Dimensionless Parameters Part 12 NIS 190-12: 1985
MEASUREMENT OF TIME, VELOCITY, ACCELERATION AND ANGULAR VELOCITY
7. Quantities and Units of Physical Chemistry and Molecular Physics Part 8
NIS 190-8: 1985
8. Quantities and Units of Periodic and Related Phenomena Part 2 NIS 190-2: 1985
9. Quantities and Units of Space and Time, Part 1 NIS 190-1: 1985
MEASUREMENT OF FORCE, WEIGHT AND PRESSURE
2013 EDITION
for by
10. Quantities and Units of Solid State Physics Part 13 NIS 190-13: 1985
11. Mathematical Signs and Symbols for Use in Physical Sciences
and Technology
NIS 190-2: 1985
ACOUSTICS AND ACOUSTIC MEASUREMENT
12. Quantities and Units of Acoustics Part 7 NIS 190-3: 1985
13. Quantities and Units of Mechanics Part 3 NIS 190-3: 1985
OPTICS AND OPTICAL MEASUREMENT
14. Quantities and Units of Light Related Electric Magnetic
Radiation Part 6
NIS 190-6: 1985
THERMODYNAMICS AND TEMPERATURE MEASUREMENTS
15. Quantities and Units of Heat Part 4 NIS 190-4: 1985
ELECTRICITY, MAGNETISM, ELECTRICAL AND MAGNETIC
MEASUREMENT
16. Quantities and Units of Electricity and Magnetism Part 5 NIS 190-5: 1985
17. Instrument Transformer part 1: Current Transformer NIS/IEC 60044-1: 2003
RADIATION MEASUREMENTS
18. Quantities and Units of Atomic and Nuclear Physics NIS 190-10: 1985
19. Quantities and Units of Nuclear Reaction and Ionizing
Radiation Part 10
NIS 190-10: 1985
2013 EDITION
for by
Standards Title Code
TESTING OF METALS
1. Methods for Tensile Testing of Metals NIS 166: 1982
2. Specification for Liquefied Petroleum Gas NIS 221: 1985
3. Methods of Testing of Steel NIS 199: 1984
4. Method of Conversion of Elongation Valves for Steel Part 1: Carton and Low Alloy Steel
NIS 201: 1984
5. Erichsen Cupping Test for Metallic Sheets and Strips NIS 274: 1990
6. Metallic Materials Tube Flattering Test NIS 275: 1990
7. Reverse Bend Test for Steel Wire- Test Method NIS 280: 1990
8. Wrapping Test for Steel Wires – Test Method NIS 281: 1990
9. Methods for Sample Torsion Tests – Testing of Steel Wires NIS 032: 1973
10. Methods for Testing Galvanized Coating on Iron and Steel
Products
NIS 033: 1975
11. Standards for Iron and Steel NIS 499: 2004
CORROSION OF METALS
12 Standard on Copper Accelerated Acetic Road Spray Test (CASS
TEST)
NIS 178: 1983
13. Metallic and Non-Metallic Coating Definition of terms and
Thickness Tests
NIS 179: 1983
14. Method of Impact Testing of Metals Part 1 (120D) NIS 200: 1984
15. Intergranular Corrosion for Austenitic Stainless Steel NIS 133: 1981
FERROUS METALS
16. Verification of Rockwell B and C Scale Hardness Testing Machines
NIS 216: 1985
17. Specification for Carbon Steel Billets, Blooms and Slabs for Recoiling into Structural Steel
NIS 196: 1984
2013 EDITION
for by
18. Method for Brunell Hardness for Metals PT1 and PT2 NIS 066: 1975
IRON AND STEEL PRODUCTS
19. Standards on Steel Bars for Reinforcement of Concrete NIS 117: 1983
20. Standards for Chain-Link Wire fencing NIS 314: 1997
21. Standards Barbed Wire NIS 315: 1997
22. Standard for Hexagonal Wire Netting NIS 316: 1997
23. Specification for Mild Steel Wire for General Engineering
Purposes
NIS 056: 1973
24. Specification for Small Ropes NIS 415: 2000
25. Specification for Galvanized Steel Wires Ropes for Ships NIS 416: 2000
26. Specification for Stranded Wire Ropes for Mine Hoisting
Winding Purposes
NIS 417: 2000
27. Specification for Wire Ropes, Cranes Excavators for General
Engineering Purposes
NIS 418: 2000
28. Specification for Galvanized Corrugated Roofing Sheets NIS 180: 1989
29. Standard for Barbed Wire NIS 502: 2004
30. Specification for Structural Steel NIS 197: 1984
PRODUCTS OF NON-FERROUS METALS
31. Standard for Adjustable Mild Steel Louver Frame NIS 313: 1997
WOOD TECHNOLOGY
1. Standard for Sawn Timber for Building Construction NIS 527: 2006
2. Standard for Laminated Timber for Furniture NIS 528: 2006
3. The use of Timber for Construction NCP 002: 1973
4. Codes of Practice for the Structural Use of Timber NCP 020: 2006
5. Standard for Wooden Flush Doors NIS 362: 1997
6. Standard for Wooden Flush Doors NIS 365: 1997
2013 EDITION
for by
7. Standard for Ordinary Plywood NIS 483: 2004
8. Standard for Particle Board NIS 482: 2004
GLASS AND CERAMICS INDUSTRIES
1. Specification for Sodium Silicate NIS 380: 1997
EQUIPMENT FOR THE GLASS AND CERAMICS INDUSTRIES
2. Standard for Ceramic Tiles NIS 427: 2000
RUBBER AND PLASTIC INDUSTRIES
RAW MATERIALS FOR RUBBER AND PLASTICS AND PLASTICS INDUSTRIES
1. Standard for Technically Specified Raw Natural Rubber NIS 421: 2000
2. Specification for Male Condoms Made from Natural Latex Pt- 1 NIS 478-1: 2004
3. Test Methods for Determination of Quality of Specification of
Male and Natural Rubber Condoms
NIS 479: 2004
RUBBER
4. Methods of Test for Vulcanized Natural and Synthetic Rubbers NIS 034: 1974
5. Specification for Unplasticized Polyvinyl Chloride (UPVC)
Conduct for Electrical Installation
NIS 036: 1974
6. Method of Measuring Tensile/Strain Properties of Vulcanized
and Synthetic Rubbers
NIS 059: 1975
7. Specification for Inner Tubes of Bicycles NIS 060: 1975
PLASTICS
8. Method of Testing Flexible Urethane Foam NIS 054: 1975
2013 EDITION
for by
9. Standard Atmosphere for Conditioning and Testing Plastics NIS 072: 1975
10. Method of Determining Density and Relating Density (Specific Gravity of Plastics Excluding Cellular)
NIS 073: 1975
11. Method of Measuring Tensile Strength and Elongation at Break
of Flexible Polyurethane Foam
NIS 083: 1979
CELLULAR MATERIALS
12. Method of Test for Flexible Cellular Materials NIS 152: 1982
13. Specification for Flexible Urethane Foam for Loading Application
14. Standard Specifications for flexible polyurethane foam pillows
for domestic use.
NIS 254: 1989
15. Specification for flexible polyurethane foam mattresses. NIS 295:1993
16. Methods of testing flexible polyurethane foam. NIS 053:1975
17. Method of measuring compression set of flexible cellular materials.
NIS 084:1978
18. Method of determining permeability of vulcanized natural and synthetic rubber to gas (Constant).
NIS 084:1979
19. Method of measuring compression of flexible cellular. NIS 094:1978
20. Method of measuring apparent density of textile cellular materials.
NIS 098:1978
21. Determination tear strength of vulcanized natural and synthetic
rubber (test pieces crescent)
NIS 099:1978
.
RUBBER AND PLASTIC PRODUCTS
23. Accelerated ageing or stimulated service tests on vulcanized
natural or synthetic rubbers.
NIS 108: 1979
24. Viscosity and curing characteristics of rubbers (Natural and
Synthetic) by the shearing disc.
NIS 130: 1980
25. Method of determining the tensile properties of plastics films. NIS 071:1975
2013 EDITION
for by
26. Standard on plastic bucket made from polyethylene. NIS 008:1973
27. Standard for plastic melamine tableware. NIS 298:1993
(see also, ICS 55.120) Standard for plastic jerry can NIS 494:2004
TYRES
28. Standard on hew pneumatic passenger car tyres. NIS 252: 1989
29. Specification for rethreaded car and commercial vehicle tyres. NIS 061:1975
30. Nigerian standard on synthetic (Butyl) tubes (inner) for tyres of
automobile.
NIS 058: 1973
ADHESIVES
31. Specification for plastic bowls made from polyethylene. NIS 022: 1973
Standard Title
Code
1. Preferred Number Basic Series more rounded Valves and
Guide to their use
NIS 122
2. Code of Practice for Transport and Storage of LPG Cylinder NCP 017: 2006
3. Code of Practice for Used Vehicle Part 1 NCP 018: 2006
4. S.I Units and Recommendations for the Use of their Multiples
and of Certain Units
NIS 189: 1985
5. General Principles Concerning Quantities, Units and Symbols NIS 189: 1985
MEASUREMENT OF VOLUME
2013 EDITION
for by
6. Dimensionless Parameters Part 12 NIS 190-12: 1985
MEASUREMENT OF TIME, VELOCITY, ACCELERATION AND
ANGULAR VELOCITY
7. Quantities and Units of Physical Chemistry and Molecular
Physics Part 8
NIS 190-8: 1985
8. Quantities and Units of Periodic and Related Phenomena Part 2
NIS 190-2: 1985
9. Quantities and Units of Space and Time, Part 1 NIS 190-1: 1985
MEASUREMENT OF FORCE, WEIGHT AND PRESSURE
10. Quantities and Units of Solid State Physics Part 13 NIS 190-13: 1985
11. Mathematical Signs and Symbols for Use in Physical Sciences
and Technology
NIS 190-2: 1985
ACOUSTIC AND ACOUSTIC MEASUREMENT
12. Quantities and Units of Acoustics Part 7 NIS 190-3: 1985
13. Quantities and Units of Mechanics Part 3 NIS 190-3: 1985
OPTICS AND OPTICAL MEASUREMENT
14. Quantities and Units of Light Related Electric Magnetic
Radiation Part 6
NIS 190-6: 1985
THERMODYNAMICS AND TEMPERATURE MEASUREMENTS
15. Quantities and Units of Heat Part 4 NIS 190-4: 1985
ELECTRICITY, MAGNETISM, ELECTRICAL AND MAGNETIC
2013 EDITION
for by
MEASUREMENT
16. Quantities and Units of Electricity and Magnetism Part 5 NIS 190-5: 1985
17. Instrument Transformer part 1: Current Transformer NIS/IEC 60044-1: 2003
RADIATION MEASUREMENTS
18. Quantities and Units of Atomic and Nuclear Physics NIS 190-10: 1985
19. Quantities and Units of Nuclear Reaction and Ionizing
Radiation Part 10
NIS 190-10: 1985
2013 EDITION
for by
STANDARD TITLE
Code
PAPER PRODUCTION PROCESSES
1. Method for testing of Paper and board for water absorption. NIS 250: 1998
2. Method of determination of bursting strength. NIS 283: 1990
PAPER AND BOARD
1. Method of sampling and conditioning of paper and board for testing. NIS 102: 1978
2. Specification for sizes of poster and bill boards NIS 303: 2004
PAPER PRODUCTS
1. Specification for toilet paper. NIS 105: 1978
2. Standard for exercise book. NIS 461: 2003
3. Method of testing for paper and allied products part 2 NIS 160-2:1978
4. Standard for dimension and page layout pt-1 NIS 498-1:2004
5. Standard for paper and board determination of ash. NIS 249::1988
6. Paper articles of stationary that include detachable sheets. NIS 209:1985
7. Standard for paper and board determination of gram mage or paper
substance.
NIS 248:1988
2013 EDITION
for by
8. Specification for carbon paper. NIS 277:1990
9. Specification for kraft paper NIS 284: 1990
1.. Standard for Paints and Vanishes Part 3. Examination and Preparation of Samples for Testing
NIS 267: 1989
2. Standard for paints and vanishes for gloss paints for
decorative purposes.
NIS 268:1989
3. Specification for emulsion paints. NIS 269:1989
4. Standard panels for testing. Standards for paints
and vanishes.
NIS 273: 1990
5. Standard for paints and vanishes Part 6 Test
methods for paint and vanishes.
NIS 278-6:1990
6. Sampling procedure for paints and vanishes. NIS 285:1990
INKS. PRINTING INKS
7 Standard method for testing printing inks. NIS 424:2000
8. Standard for indelible ink NIS 492:2006
Standard Title Code
ROAD VEHICLES IN GENERAL
1. Standardization of Motor Vehicle Industry NIS 214: 1984
2. Road Vehicles Registration for Government Approval
Inspection Station
NIS 224: 1987
3. Code of Practice for Establishment of Driving Schools in Nigeria
NIS 296: 1993
ROAD VEHICLE SYSTEMS
2013 EDITION
for by
4. Road Vehicle Tyres and Dimensions Terms and Definitions of
Motor Vehicles and Towed Vehicle
NIS 100: 1980
5. Road Vehicles Lighting and Signaling NIS 134: 1980
6. Standard for Road Vehicles: Passenger Car Braking System –
Measurement of Brake Performance
NIS 194: 1984
7. Standard for Brake Pads and Linings NIS 323: 1997
8. Road Vehicles – Requirements for Shock Absorbers for Motor Vehicles
NIS 145: 1985
9. Specifications for Rear View Mirrors NIS 154: 1982
10. Test Method for Laminated Windscreens and Safety Glasses
for Motor Vehicles
NIS 476: 2004
11. Test Methods for Toughened Glass for Rear Windows and Side Doors of Motor Vehicles
NIS 477: 2004
12. Standard for Toughened Glass for Back-Window and Side-Glass for Automobiles
NIS 312: 1997
13. Road Vehicles Requirements for Passenger Cars NIS 127: 1981
INTERNAL COMBUSTION ENGINES FOR ROAD VEHICLES
14. Specification for throw away type oil filters – Road Vehicles NIS 191 – 1984
15. Resistance to High Pressure Drop and Elevated Temperatures NIS 192-2: 1984
16. Standard Test Methods for Throw-away type oil filters for
Automotive Engines Part 1 Proof Pressure
NIS 192-1: !984
COMMERCIAL VEHICLES
17. Road Vehicles Inspections and Testing Procedures for Motor Vehicles and Semi Trailer
NIS 148: 1982
18. Standard for Trailers NIS 301: 2004
2013 EDITION
for by
19. Code of Practice for Trailer and Tanker Driver NCP
20. Specification for Mobile Oil Tankers NIS 302: 2004
21. Specification for Bulk Road Vehicles NIS 529: 2006
MOTOR CYCLES AND MOPEDS
22. Specification for Motor Cycle Claims NIS 414: 2000
Standard Title Code
MATERIAL HANDLING EQUIPMENT
1. Specification for Shovels for General Purposes NIS 215: 1985
Standard Title Code
SACKS AND BAGS
1. Specification for Woven Bags (Polypropylene) NIS 261: 1989
2. Standard for Vest Shaped Carrier Plastic Shipping Bags NIS 422: 2000
3. Specification for B Twill Jute Bag NIS 132: 1981
BOTTLE, POTS AND JARS
4.. Soft Drinks & Beer Glass Bottles NIS 381: 2004
5. Standards for Plastic Jerry Can NIS 423: 2000
AEROSOL CONTAINERS
6. Specification for Household Aerosol Insecticides & Performance
Requirement for Filled & Unfilled Aerosol Insecticides Dispenser
NIS 425: 2000
CASES BOXES AND CRATES
7. Standards for Plastic Cates to Hold NIS 258: 2000
2013 EDITION
for by
8. Boxes and Enclosure for Electrical Accessories for Household
and similar fixed Electrical Installations – Pt. 1 – General
NIS/IEC 60670-1: 2002
9. Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations – Pt – 23: Particular
Requirements for Floor Boxes and Enclosures
NIS/IEC 60670-23: 2006
10. Boxes and Enclosures for Electricity Accessories for Household and Similar Fixed Electrical Installations – Pt – 24: Particular
Requirements for Housing Protective Devices and Similar Power Consuming Devices
NIS/IEC 60670-23: 2005
Standards Title Code
COMPONENTS AND ACCESSORIES FOR TELECOMMUNICATIONS
EQUIPMENT
1. Uninterruptible Power Systems: Pt 1-1: General and Safety Requirements for UPS used in Operator Access Areas
NIS/IEC 62040-1-1: 2002
2. Uninterruptible Power Systems: Pt 1-2: General and Safety Requirements for UPS used in Restricted Access Locations
NIS/IEC 62040-1-2: 2002
3. Uninterruptible Power Systems: Pt -3: Methods of Specifying
the Performance and Test Requirements
NIS/IEC 62040-2: 1999
4. Uninterruptible Power Systems: Pt -2: Electromagnetic Compatibility (EMC) Requirements
NIS/IEC 62030-2: 2002
2013 EDITION
for by
AUDIO, VIDEO AND AUDIOVISUAL ENGINEERING
5. High Fidelity Audio Equipment and Systems: Minimum
Performance Requirements Pt – 12: Sound Output of Television Tuners
NIS/IEC 60581-12: 1988
6. High Fidelity Audio Equipment and Systems: Minimum Performance Requirements – Pt. 13 : High Fidelity Systems for
Use in Vehicles (for example motor cars) FM Radio Tuner Units
NIS/IEC 60581-13: 1988
7. Sound System Equipment-Pt-1-General Requirement NIS/IEC 60286-1: 1985
8. High Fidelity Audio Equipment and Systems: Minimum Performance Requirements – Pt – 10: Headphones
Standard Title Code
INFORMATION TECHNOLOGY
1. Nigerian Standard for Typewriter NIS 067: 1975
2. Standards for Adhesive: Pt. 1 (Bottle Label Adhesive) NIS 310: 1997
3. Specification for Paper Sizes NIS 115: 1979
4. Specification for School Chalk NIS 126: 1981
5. Paper and Board Folders Files Sizes NIS 203: 1985
6. Paper Board and Pulps Unit for Expressing Properties NIS 204: 1985
7. Specification for Paper Holes for General Filling Purposes NIS 206: 1985
8. Paper Internal Diameters of Cover of Reels – Oil Code Nomenclature
2013 EDITION
for by
Standard Title Code
PHOTOGRAPHY
1. Standard on Glossary of Terms for Printing Inks NIS 300: 1993
GRAPHIC TECHNOLOGY
2. Standard for Printing Inks for Numbering NIS 299: 1993
3. Test Method for Specification on Magnetic Ink Character Recognition
Standard Title Code
HOROLOGY
1. Standards for Particular Requirements for Clocks NIS 311: 1997
TESTING
Standards Title Code
1. Natural Salt Spray Test for Coated
MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE
Standards Title Code
2013 EDITION
for by
FASTENERS
1. Mild Steel Wire Nails NIS 118: 1988
FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE
Standards Title Code
FLUID STORAGE DEVICES
1. Standards for Polyethylene Water Storage Water Tanks NIS 535: 2006
2. Specifications for Gas Refillable Liquefied Petroleum Containers NIS 69: 1975
3. Specification for Inspection and Testing of Liquefied Petroleum gas (LPG)
NIS 456: 2003
PIPELINE COMPONENTS AND PIPELINES
4. Specification for Steel Pipe (Welded and Scentless) for Water Pipes
NIS 198: 1995
5. Standard for Welded Black and Galvanized NIS 240: 1998
6. Specification for cast Iron Pressure Pipes for Water Sewage and Gas
NIS 070: 1975
7. Specification for Steel Tubes for Mechanical and General Engineering Purposes
NIS 324: 1997
8. General Requirement for Deep-well Hand-pump (Ruwatsan 1)
for Rural Water Supply
NIS 325: 1997
9. General Requirement for Direct Action Hand-Pump for Rural
Water Supply
NIS 327: 1997
10. Specification for Unplasticised Polyvinyl Chloride Pipes for Cold-Water Services
NIS 076: 1980
11. Unplasticised Polyvinyl Chloride NIS 375: 1997
2013 EDITION
for by
12. Standard for Asbetos Cement Pressure Pipes NIS 364: 1997
VENTILATORS, FANS, AIR CONDITIONERS
13. Specification for Room Air Conditioners NIS 046: 1974
14. Rating and Testing of Room Air Conditioners NIS 047: 1974
15. Specification for Table Fan NIS 063: 1975
16. Specification for Pedestal fans and Regulators NIS 063: 1975
17. Nigerian Specification for Ceiling Fans and Regulator NIS 065: 1975
18. Methods of Determination of K. Values of Tensile Testing
Systems
NIS 176: 1983
VACUUM TECHNOLOGY
19. Standard for Vacuum Flasks NIS 536: 2006
(NIS 493: 2004
MANUFACTURING ENGINEERING
Standards Title Code
MACHINE TOOLS
1. Handheld Motor Operated Electricity Tools Safety – Part 2: Particular Requirements for Drill and Impact Drills
NIS/IEC 60745-2-1: 2003
WELDING BRAZING AND SOLDIERING
2. General Requirements for Oxyacetylene Welding of Mild Steel NIS 020: 1974
3. Specification for Metal Arc Welding of Carbon and carbon
Manganese Steels
NIS 227: 1987
4. Welding Wire Mesh for General Purposes NIS 227: 1987
2013 EDITION
for by
SURFACE TREATMENT AND COATING
5. Metallic Coatings, Coatings other than those anoxic to the Basic Metal Accelerated Corrosion – Test Method for the
Valuation of the Real Results
NIS 123: 1981
6. Specification for Corrosion Protection - Phosphate Treatment of Iron and Steel
NIS 124: 1980
7. Specification for Enamel-ware for Home Use NIS 048: 1974
8. Standard for Processed Disc Records NIS 049: 1975
TEXTILE AND LEATHER TECHNOLOGY
Standard Title Code
PROCESSES OF TEXTILE INDUSTRY
1. Method of Determining Moisture Textiles NIS 91: 1989
2. Textiles-Standards Atmosphere for Conditioning and Testing NIS ISO 139: 1973
TEXTILE FIBRES
3. Code of Care Labeling of Textiles Using Symbols NIS 443: 2003
4. Standard Method for Determination of Colour Fastness to
Perspiration
NIS 051: 1983
5. Standard for Method of Determining of Changes in Dimension of Fabrics
NIS 052: 1975
6. Nigerian Standard Specification for Classification and Grading of Cotton
NIS 055: 1976
7. Specification of Absorbent Cotton Wool NIS 112: 1980
8. General Method for Determining the Dimension/Weight NIS 042: 1980
2013 EDITION
for by
(Mass) of Fabric
9. Standard Method of Conditioning Textiles Materials for Testing
NIS 043: 1980
PRODUCTS OF THE TEXTILE INDUSTRY
10. Specification for Woven & Knitted Fabrics for Upholstery NIS 432: 2000
11. Method for the Determination of Washing Fastness of Coloured Textiles
NIS 002: 1972
12. Colour Fastness for Light and Weathering Colour Fastness to Natural Light
NIS 151: 1982
13. Standard for Method of Determination Colour Fastness to
Wet Cleaning/ Shampooing
NIS 162: 1982
13. Standard for Method of Determination of Colour Fastness to
Dry Cleaning
NIS 163: 1982
14. Standards for Methods of Testing NIS 174: 1983
15. Standards on Methods of Test for Colour Fastness to Water NIS 175: 1983
16. Standard for Method of Determination of Fastness of Coloured Textiles to Rubbing
NIS 077: 1978
17. Method of determination of Breaking Load (Strength) and
Extension of Strips of Woven Fabrics
NIS 079: 1980
18. Standard for Method for the Determination of Colour
Fastness of Textile Materials to Hot Pressing
NIS 093: 1983
19. Textiles – Tests for Colour Fastness – Pt. A01: General Principles of Textiles Testing
NIS ISO 105-CO7: 1994
20. Textile – Tests for Colour Fastness – Pt – C08: Colour Fastness to Domestic and Commercial Laundering using a
non-phosphate reference detergent incorporating a low temperature bleach activator
NIS ISO 105-CO8: 2001
21. Textile Tests for Colour Fastness – Pt. C09: COlour Fastness
to domestic and Commercial laundering-oxidative Bleach Response using a Non-Phosphate Reference Detergent
NIS ISO 105 – CO9: 2001
2013 EDITION
for by
Incorporating a low Temperature Bleach Activator
22. Textile – Tests for Colour Fastness – Pt. X12: Colour Fastness to Rubbing
NIS ISO 105-X12: 2000
23. Standard for Methods of Testing Textiles – Tests for Colour
Fastness – Pt. X16: COlour Fastness to Rubbing-Small Areas
NIS ISO 105 – X16: 2000
24. Specification for Suiting Fabrics NIS 435: 2000
25. Specification for Colour Fastness for Textile Articles NIS 436: 2000
26. Specification for the Grading of Cellulosic and the Blends (Both Gray/Boaft) Furnished States
NIS: 184: 1984
27. Method for Determining the Strength of Yarns from Packages
Part 1: Braking Load
NIS 185: 1985
28. Method for Determining the Snaring Twist in Yarns – Direct
Counting Method
NIS 095: 1988
29. Specification for Cotton Sewing Threads NIS 095: 1988
30. Specification for Socks NIS 557: 2007
31. Specification for Knitting Yarns NIS 561: 2007
32. Standard Methods of Determination of Twist in Yarns – Direct Counting Method
NIS 195: 1984
33. Method for the Determination of Added Matter in Finished Fabric of Cotton and Degenerated Cellulose
NIS 104: 1978
34. Specifications for Terry Towels NIS 110: 1980
35. Specification for Embroidery Dress Fabrics NIS 113: 1980
36. Methods for Determination of Recovery of Fabrics from
Creasing
NIS 028: 1980
37. Specification for African Prints Wax Prints NIS 307: 1997
38. Specification for Guinea NIS 433: 2000
39. Specification for Cotton Drill Fabrics NIS 434: 2000
40. Specification for Suiting Fabrics NIS 435: 2000
41. Specification for Jean Fabrics NIS 437: 2000
42. Specification for Shirting Fabrics NIS 308: 1997
2013 EDITION
for by
43. Specification for Nigerian Armed Forces Drill Fabrics NIS 309: 1997
44. Standard for Tarpaulins NIS 101: 1980
45. Standard for Tufted Carpet and Rugs NIS 511: 2006
46. Standard for Woven Carpets and Rugs NIS 522: 2006
TEXTILE MACHINERY
47. Code of Care Labeling of Textile using Symbols NCP 012: 2003
48. Code of Practice for Posturing of Labels on Garments NCP 023: 2007
49. Codes of Practice for Flaying of Hide and Skin NCP 022: 2006
LEATHER TECHNOLOGY
50. Methods of Sampling and Test for Chrome Tanned Leathers
and Vegetable
NIS 045: 1974
51. Code of practise for preservation of hide and skin by wet salting
NCP 021: 2006
52. Standard for Sole leather NIS 544:2006
53. Standard for insole leather NIS 543:2006
54. Standard for garment leather NIS 546:2006
55. Standard for Shoe upper leather NIS 565:2007
56. Standard for wrist watch leather NIS 558:2007
57. Standard for hat/cap sweatband leather NIS 559: 2007
58. Standard for chamois leather NIS 560:2007
59 Standard for book binding leather NIS 562 : 2006
CLOTHING INDUSTRY
STANDARD TITLE CODE
CLOTHES
1 Specification for uniforms NIS 144: 1981
2013 EDITION
for by
HEADGEAR, CLOTHING ACCESSORIES, FASTENING OF
CLOTH
1 Standard for belt leather NIS 542:2006
2 Standard for bag leather NIS 547: 2006
3 Standard for glove leather NIS 545: 2006
FOOTWEAR
1 Standards for leather shoes NIS 138 : 1981
2 Standard for labelling of footwear NIS 484 : 2004
3 Nigerian standard for footwear NIS 040 : 1975
4 Specification for sole leather NIS 041: 1975
5 Specification for glazed kid for shoe upper NIS 044: 1975
SEWING MACHINES AND OTHER EQUIPMENT FOR THE CLOTHING INDUSTRY
1 Standard for general requirements for straight stitch
sewing machines for domestic purposes
NIS 297: 1993
2 Standard for particular requirements for sewing
machines
NIS 355: 1997
2013 EDITION
for by