standards for industrial head protection protection.pdfstandards for industrial head protection...

Head, Eye, Face and Hearing Protection

104 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com

Standards for Industrial Head Protection

ANSI/ISEA Z89.1-2009 and CSA Z94.1-2005ANSI/ISEA Z89.1-2009 and CSA Z94.1-2005 are voluntary industry standards that establishthe types and classes of industrial helmets and provide performance and testingrequirements for these helmets. ANSI/ISEA Z89.1-2009 is a revision of the standard coveringindustrial head protection; this revision supplants the 2003 revision. CSA Z94.1-2005 is a revision of the standard covering industrial head protection used in Canada; this revision supplants the 1992 revision. These standards include specifications for helmetsdesigned to offer protection from top and/or lateral impact.

The three classes included in these standards indicate the helmet’s electrical insulation rating:

Class E (Electrical) – Helmets intended to reduce the danger of exposure to high-voltageelectrical conductors, proof-tested at 20,000 volts

Class G (General) – Helmets intended to reduce the danger of exposure to low-voltageelectrical conductors, proof-tested at 2,200 volts

Class C (Conductive) – Helmets do not provide protection from electrical conductors

The test requirements for Industrial Head Protection per ANSI/ISEA Z89.1-2009 and CSA Z94.1-2005 are separated by helmet type: Type I helmets protect the wearer from top impact, while Type II helmets protect the wearer from top and lateral impact. The test requirements for ANSI/ISEA Z89.1-2009 and CSA Z94.1-2005 are available from the Industrial Safety Equipment Association and www.CSA.ca, respectively.

105


Standards for Industrial Head Protection

Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com

All MSA helmets have been tested per the mandatory and non-mandatory ANSI/ISEA Z89.1-2009 and CSA Z94.1-2005 requirements.MSA offerings include:

MSA Helmet Standard(s) Type Class /LT/HV

V-Gard Cap/Hat ANSI/ISEA Z89.1-2009 CSA Z94.1-2005 Type I Class E /LT/HV

Advance Vented Cap ANSI/ISEA Z89.1-2009 Type I Class C /LT/HV

Advance Non-Vented Cap ANSI/ISEA Z89.1-2009 Type I Class E /LT/HV

SmoothDome Cap ANSI/ISEA Z89.1-2009 CSA Z94.1-2005 Type I Class E /LT/HV

Topgard Cap/Hat ANSI/ISEA Z89.1-2009 CSA Z94.1-2005 Type I Class E /LT/HV

Thermalgard Cap ANSI/ISEA Z89.1-2009 CSA Z94.1-2005 Type I Class G /LT/HV

Skullgard Cap/Hat ANSI/ISEA Z89.1-2009 Type I Class G /LT/HV

Super-V Cap *ANSI/ISEA Z89.1-2009 Type I Class E LT/HV

CSA Z94.1-2005 Type II Class E LT/HV

Vanguard Cap ** ANSI/ISEA Z89.1-2009 CSA Z94.1-2005 Type II Class E LT/HV

Comfo Cap ANSI/ISEA Z89.1-2009 Type I Class G LT

*Super-V Cap meets all applicable requirements for a Type II helmet as outlined in CSA Z94.1-2005 and a Type I helmet as outlined in ANSI/ISEA Z89.1-2009.

**Vanguard Cap meets all applicable requirements for a Type II helmet as outlined in CSA Z94.1-2005 and ANSI/ISEA Z89.1-2009.

2009 Additions to ANSI/ISEA Z89.1-2009Three non-mandatory tests have been added to the updated ANSI/ISEA Z89.1 standard. Manufacturers who want to claim one or more of these features can test theirhelmets according to the new procedures and mark their product accordingly. These tests are as follows:

1 – Reverse Donning [ ]In order for a helmet to be worn in reverse or a swing ratchet suspension to be used in a helmet,that particular helmet must be marked with the“double-arrowed circle” to indicate that it meetsthe new ANSI/ISEA Z89.1-2009 non-mandatory

reverse donning test.

2 – Lower Temperature [LT]The traditional low temperature test for a helmet is -18°C or 0°F. Helmets that meet ANSI Z89.1 requirements for LOWER temperatures (-30°C or -22°F) can be marked with “LT” by themanufacturer.

3 – High-Visibility [HV]Helmets that meet the non-mandatoryrequirements for high-visibility, including specialtests for Chromaticity and Luminescence for added visibility, can be marked with “HV” by themanufacturer.

MSA University, MSA’s premieronline training center,

offers a wide range of trainingand informational materials.

Register today atwww.MSAnet.com/MSAU


V-Gard® Protective Caps and Hats


white blue yellow orange red

green gray hi-viz orange hi-viz yellow-green bright lime green

dark blue gold robin’s egg blue brown silver

tan black light buff purple pink

white blue yellow orange red

green gray hi-viz orange hi-viz yellow-green bright lime green

CAPS

HATS

107


V-Gard Protective Caps and Hats


MSA V-Gard Slotted Caps and Non-Slotted Hats meet all applicable requirements for a Type I (top impact)helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E) and certified to CSA Z94.1-2005 (Class E) with 1-Touchand Fas-Trac suspensions only. V-Gard Caps and Hats meet the voluntary standard for low temperature [LT]and reverse donning as prescribed by ANSI/ISEA Z89.1-2009. Look for the official reverse donning logoto determine if your hard hat may be worn backwards without voiding approvals.

Third-partycertified by:

V-Gard Complete AssembliesSmall V-Gard

Slotted CapStandard V-Gard

Slotted CapLarge V-Gard

Slotted CapV-Gard Hat Non-Slotted

Color w/ Staz-OnSuspension

w/ Fas-TracSuspension*

w/ Staz-OnSuspension

w/ 1-TouchSuspension*


w/ Uni-ProSuspension




w/ 1-TouchSuspension*


White 466354 477477 463942 10057441 475358 10004760 473284 477482 454733 10058321 475369

Blue 466355 477478 463943 10057442 475359 10004762 476928 477483 454732 10058320 475368

Yellow 466356 477479 463944 10057443 475360 10004761 473285 477484 454730 10058318 475366

Orange • • 463945 10057444 475361 10004767 • See Note 454734 10058322 496075

Red • • 463947 10057446 475363 10004763 • See Note 454736 10058324 475371

Green • • 463946 10057445 475362 10004765 • See Note 454735 10058323 475370

Gray (navy) • • 463948 10057447 475364 10004766 • See Note 454731 10058319 475367

Hi-Viz® Orange** • 489368 488148 10057420 488146 10004764 • 489364 489360 10058326 10021292

Hi-Viz Yellow-Green • • • 10061514 10061512 • • See Note • 10061516 10061515

Bright Lime Green • • 815558 • 815565 10017732 • • 815562 • 815570

Dark (Canadian) Blue • • • • 802972 • • • • • 802975

Gold • • 464852 • 475365 10004768 • See Note • • •

Robin’s Egg Blue • • 463111 • 495853 • • • • • •

Brown • • 464658 • 495854 • • • • • •

Silver • • 484340 • 495855 • • See Note • • •

Tan • • 461180 • • • • • • • •

Black • • 475235 • 492559 • • See Note • • •

Light Buff • • 478237 • 495856 • • • • • •

Purple • • 488398 • 495858 • • • • • •

Pink • • • • 495862 • • • • • •

Special V-Gard Assemblies

Hi-Viz® Orange w/Yellow-Green Stripe** • • • 10102195 10102193 • • • • • •

Hi-Viz® Yellow-Green w/Red-Orange Stripe** • • • 10102234 10102233 • • • • • •

Hi-Viz® Yellow-Green w/Silver Stripe** • • • 10102196 10102194 • • • • • •

White, w/Lamp Bracket &Cord Holder (Class C) • • 460018 • • • • • 460069 • 815009

White, w/American Flag • • 474159 • • • • • • • •

V-Gard Assembly with Swing-Ratchet Suspension

White standard-size V-Gard Cap, w/Swing-Ratchet Suspension 10004689

Note: These colors are available with a minimum quantity of 20 helmets per color.* Certified to CSA.** V-Gard Cap/Hat meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEAZ89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Do not mix sus pen sion and helmet sizes. Make sure the sizes match (example: standard-size suspension with standard-size helmet). Use only MSA suspensions in an MSAhelmet. Failure to comply with the above will reduce the energy-absorbing ability of thepro tec tive helmet, which can result in serious injury or death.

• Available in slotted cap and non-slotted hat style

• Three size options: small (6-71/8), standard (61/2 - 8), large (7 – 81/2)

ForCap &Hat Accessories, see pp. 117–127

Our Hard Hat Accessories Compatibility Chart can help you select the right MSAaccessories to customize your cap or hat. For more information, see pp.117–118.

Customize to Make it Yours! MSA Logo Express can customize your helmets with your companylogo and choice of reflective striping. For more information, see p.108.



Fas-Trac® Ratchet Suspension

1-Touch™ Suspension

Swing-RatchetSuspension

Replacement Suspensions for V-Gard Caps and HatsFas-Trac SuspensionSmall (6–71/8) 492567

Standard (61/2–8) 10087220

Large (7–81/2) 492568

1-Touch SuspensionFor standard size V-Gard Cap or Hat (61/2–8) 10061123

Staz-On SuspensionSmall (6–71/8) 467386

Standard (61/2–8) 10087218

Large (7–81/2) 492566

UniPro SuspensionFor standard size V-Gard Cap or Hat (61/2–8) 10004788

Replacement sweatbands, for Uni-Pro only, pkg. of 5 10004786

Swing-Ratchet SuspensionSwing-Ratchet for standard size V-Gard Cap or Hat (61/2–75/8) 816645

V-Gard Protective Caps and Hats

Staz-On® Suspension

Uni-ProSuspension

A variety of MSA helmets are available can be customized with your logo,slogan, or striping imprinted on the headwear. You can select the colors andthe areas to be im print ed. based on available options per our guidelines.MSA uses both single and multi-color imprinting tech niques to provide achoice of up to four colors.

Image 2000SM

MSA offers the Image 2000 Service, which uses a photographic process toreproduce images. Available on white MSA helmets only.

Ordering InformationA minimum quantity of 20 custom-imprinted caps or hats (of the same sizeand model) is required for initial and repeat orders.

See Bulletin ID 0617-03-MC for more information.

If you have any questions, please call your local MSA distributor or MSA Logo Express1-800-MSA-LOGO (1-800-672-5646).

More details are also on our LogoExpress Web site:

www.MSAnet.com/logoexpress

Custom Imprinting and StripingLogo Express® Service for MSA Helmets

Customize to Make it Yours!

109



NFL V-Gard Protective Caps

NFL Properties, the NFL, and its Member Clubs make no express or implied claims with respect to the effectiveness and safety of these products and have not manufactured or endorsed these products in any way.

NFL V-Gard Caps NOTE: These styles are not packaged in a display box.

NFL V-Gard AssembliesV-Card Cap (Standard Size) Part No. V-Card Cap (Standard Size) Part No. V-Card Cap (Standard Size) Part No. V-Card Cap (Standard Size) Part No.

Arizona Cardinals 818384 Dallas Cowboys 818392 Miami Dolphins 818399 Pittsburgh Steelers 818407

Atlanta Falcons 818385 Denver Broncos 818393 Minnesota Vikings 818400 San Diego Chargers 818408

Baltimore Ravens 818386 Detroit Lions 818394 New England Patriots 818401 San Francisco 49ers 818409

Buffalo Bills 818387 Green Bay Packers 818395 New Orleans Saints 818402 Seattle Seahawks 818410

Carolina Panthers 818388 Houston Texans 10031348 New York Giants 818403 St. Louis Rams 818411

Chicago Bears 818389 Indianapolis Colts 818396 New York Jets 818404 Tampa Bay Buccaneers 818412

Cincinnati Bengals 818390 Jacksonville Jaguars 818397 Oakland Raiders 818405 Tennessee Titans 818413

Cleveland Browns 818391 Kansas City Chiefs 818398 Philadelphia Eagles 818406 Washington Redskins 818414

New Style NFL V-Gard AssembliesV-Card Cap (Standard Size) Part No. V-Card Cap (Standard Size) Part No. V-Card Cap (Standard Size) Part No. V-Card Cap (Standard Size) Part No.

Arizona Cardinals 10098024 Dallas Cowboys 10098072 Miami Dolphins* 10098080 Pittsburgh Steelers 10098088

Atlanta Falcons* 10098025 Denver Broncos 10098073 Minnesota Vikings* 10098081 San Diego Chargers* 10098089

Baltimore Ravens* 10098026 Detroit Lions* 10098074 New England Patriots 10098082 San Francisco 49ers 10098090

Buffalo Bills* 10098027 Green Bay Packers 10098075 New Orleans Saints* 10098083 Seattle Seahawks 10098091

Carolina Panthers* 10098028 Houston Texans* 10098076 New York Giants 10098084 St. Louis Rams* 10098092

Chicago Bears 10098029 Indianapolis Colts 10098077 New York Jets* 10098085 Tampa Bay Buccaneers* 10098093

Cincinnati Bengals* 10098030 Jacksonville Jaguars* 10098078 Oakland Raiders 10098086 Tennessee Titans* 10098094

Cleveland Browns* 10098071 Kansas City Chiefs* 10098079 Philadelphia Eagles* 10098087 Washington Redskins 10098095

* Available September 2009.

Come individually packaged in a display box!

Support Your Team!

More Options!

New Style!NFL V-Gard Slotted Caps

The entire line of NFL V-Gard Caps come equipped with the strap-adjustable 1-Touch® suspension. MSA V-Gard Caps meet all applicable requirements for a Type I(top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E). These caps also meet the voluntary standard for reverse donning asprescribed by ANSI/ISEA Z89.1-2009. Look for the official reverse donning logo to determine if you hard hat may be worn backwards without voidingapprovals. These new styles including the Steelers Super Bowl "Six-Pack" V-Gard Caps come individually packaged in a display box.

“Six-Pack” Steelers V-Gard AssembliesV-Card Cap (Standard Size) Part No.

Black Steelers "Six-Pack" V-Gard Cap 10102205

Gold Steelers "Six-Pack" V-Gard Cap 10102206



Freedom Series™ V-Gard Protective Caps and Hats

American Freedom Series Assemblies

Full Decoration V-Card Cap (Standard Size)

V-Card Hat (Standard Size)

American Eagle 10079479 •

American Stars and Stripes 10052945 10071157

American Flag with 2 Eagles 10052947 10071159

Camouflage 10104254 10103908

Dual American Flag 10050611 •

Front Logo OnlyUnited We Stand 10034263 •

Canadian Freedom Series Assemblies

Full Decoration V-Card Cap (Standard Size)

V-Card Hat (Standard Size)

White with Red Maple Leaf 10050613 10082234

Black with Red Maple Leaf 10082233 •

Camouflage w/Canadian Flag on front* 10104925 •

Show Your Pride!

American Flag with 2 Eagles

American Stars and Stripes

Dual American Flag United We Stand

Camouflage

Black with Red Maple Leaf

White with Red Maple Leaf

American Eagle

Stay compliant while protecting your head andexpressing your patriotism with MSA's FreedomSeries V-Gard Slotted Caps and Non-SlottedHats.The bright designs are unique, with a superiorshiny finish over the V-Gard Cap and Hat.

Freedom Series Caps come equipped with MSA'sFas-Trac® Suspension and meet all applicablerequirements for a Type I (top impact) helmet asoutlined in ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E).

MSA V-Gard Caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning. Look for the official reverse donning logo to determine if your hard hat may be wornbackwards without voiding approvals.


Our Hard Hat Accessories Compatibility Chart can help you select the right MSA accessories tocustomize your cap or hat. For more information, see pp.117–118.

Customize to Make it Yours! MSA can customize your helmets with your company logo and choice of reflectivestriping. For more information, see p.108.

New!

* not pictured

111



Specialty V-Gard Caps

V-Gard Caps with “Painted Look” FinishSpecialty V-Gard Caps are equipped with MSA's Fas-Trac suspension andslots to accept all MSA V-Gard accessories. Meet all applicablerequirements for a Type I helmet as outlined in ANSI/ISEA Z89.1-2009(Class E) and CSA Z94.1-2005 (Class E). These caps also meet the ANSI/ISEAZ89.1-2009 voluntary standard for reverse donning. Look for the officialreverse donning logo to determine if your hard hat may be wornbackwards without voiding approvals.

Specialty HelmetsFull Decoration V-Gard Cap with Fas-Trac

Rally Cap 10101535

Metallic Gold 10101854

Black Fire 10092015

Ceremonial Gold HelmetCommemorate your special occassion with this gold-coated V-Gard Cap. Equipped with MSA's Fas-Tracsuspension to wear during a groundbreaking ceremony. Not to be worn for safety purposes.

Does Not Meet Any Safety StandardsFull Decoration V-Gard Cap with Fas-Trac

Ceremonial Gold Helmet 10061550

New!

Black Fire

Rally Cap Metallic Gold

Ceremonial Gold

Vented Advance Caps provide cooling vents for improved air circulation and comfort, while theNon-Vented Advance Caps provide users with dielectric head protection. Features include:• Optional 4- or 6-point Fas-Trac suspension • Lateral contours above the ear for easy integration of hearing protection• Glaregard® underbrim to reduce reflective glare

Advance Caps meet all applicable requirements for a Type I helmet (top impact) as outlined inANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E). These caps also meet theANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning. Look forthe official reverse donning logo to determine if your hard hat may be worn backwardswithout voiding approvals.

Replacement Suspensions4-Point Fas-Trac Suspension (61/2–8) 10034966

6-Point Fas-Trac Suspension (61/2–8) 10034967

Advance Cap AssembliesColor Style 4-Point Fas-Trac

(Standard Size)6-Point Fas-Trac

(Standard Size)

White Vented 10034018 10034027

Blue Vented 10034019 10034028

Yellow Vented 10034020 10034029

Red Vented 10034022 10034031

Green Vented 10034023 10034032

Hi-Viz Orangez* Vented 10034026 10034035

Hi-Viz Yellow-Green* Vented 10074819 10074820

White Non-Vented 10034088 10034097

Non-Vented Advance Cap

* Advance Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009.Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Vented Advance Cap

Advance® Cap: Vented and Non-Vented Styles



SmoothDome™ Slotted Cap

MSA's SmoothDome Slotted Caps are welcomed by welders,especially those in shipbuilding and general construction, for its smooth crown and light weight. These caps meet allapplicable requirements for a Type I (top impact) helmet asoutlined in ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005(Class E).

SmoothDome Caps also meet the ANSI/ISEA Z89.1-2009voluntary standard for low temperature [LT] and reversedonning. Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

SmoothDome Cap AssembliesColor 4-Point Fas-Trac

(Standard Size)6-Point Fas-Trac

(Standard Size)

White 10074067 10084078

Blue 10074068 10084079

Yellow 10074069 10084080

Orange 10074070 10084081

Red 10074071 10084082

Green 10074072 10084083

Gray 10074073 10084084

Hi-Viz Orange* 10074077 10084088

Hi-Viz Yellow-Green* 10074084 10084095

Hi-Viz Orange w/Yellow-Green Stripe* 10095987 10095988

Hi-Viz Yellow-Green w/Orange Stripe* 10095989 10095990

Hi-Viz Orange w/Silver Stripe* 10096141 •

Hi-Viz Yellow-Green w/Silver Stripe* 10096142 •

Replacement Suspension4-Point Fas-Trac Suspension 10087220

6-Point Fas-Trac Suspension 10092163

Swing-Ratchet Suspension 816645

SmoothDomeProtective Cap

Topgard® Slotted Caps and Non-Slotted Hats are built for use by utilities and other industries where headprotection with dielectric properties is necessary. Limited resistance to top impact or penetration is retained overa wide range of temperatures.

Topgard Caps and Hats meet all applicable requirements for a Type I helmet (top impact) as outlined in ANSI/ISEAZ89.1-2009 (Class E) and CSA Z94.1-2005 (Class E). These caps and hats also meet the ANSI/ISEA Z89.1-2009voluntary standard for low temperature [LT] and reverse donning. Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Topgard®

Protective Hat

Replacement Suspensions1-Touch Suspension (61/2–8) 10061127

Fas-Trac Suspension (61/2–8) 473333

Swing-Ratchet Suspension (61/2–75/8) 816648

Topgard AssembliesTopgard Slotted Cap Topgard Non-slotted Hat

Color w/ 1-Touch w/ Fas-Trac w/ 1-Touch w/ Fas-Trac

White 454728 475385 454719 475393

Yellow 454721 475378 454712 475387

Gray 454722 475379 454713 •

Blue 454723 475380 • •

Orange 454725 475382 • •

Green 454726 475383 • •

Red 454727 475384 • •

Bright Orange • 804396 • 804397

White w/lamp bracket and cord holder 448914 • • •

Topgard®

Protective CapThird-partycertified by:

* SmoothDome Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Topgard® Protective Caps and Hats

113


Thermalgard® Protective Caps



OurHard Hat Accessories Compatibility Chart can help you select the right MSAaccessories to customize your cap or hat. For more information, see pp.117–118.

Customize to Make it Yours! MSA can customize your helmets with your company logo and choiceof reflective striping. For more information, see p.108.

Thermalgard Slotted Caps are intended for use where workers may need a helmet withelevated temperature capability. The glass-reinforced nylon shell has a beaded edge forimproved rigidity.

Thermalgard Caps meet all applicable requirements for a Type I (top impact) helmet asoutlined in ANSI/ISEA Z89.1-2009 (Class G) and CSA Z94.1-2005 (Class G). These caps alsomeet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reversedonning. Look for the official reverse donning logo to determine if your hard hatmay be worn backwards without voiding approvals.

ThermalgardProtective Cap

Thermalgard with Swing-Ratchet SuspensionThird-party

certified by:

Replacement Suspensions1-Touch Suspension (61/2–8) 10061127

Fas-Trac Suspension (61/2–8) 473333

Swing-Ratchet Suspension (61/2–75/8) 816648

Thermalgard Assemblies Color w/ 1-Touch w/Fas-Trac

Yellow 486964 486959

White 486965 486960

Red • 486961

Orange 486967 486962

Blue 486968 486963

Bright Orange 800359 800360

Green 487399 814343

Steel Gray • 10095325

Thermal-E™ Protective CapsThermal-E Caps are manufactured for workers in industries where elevated temperatureand Class E protection are required. These caps are offered in five colors: white, yellow, red,dark gray, and orange.

Thermal-E Caps meet all applicable requirements for a Type I (top impact) helmet asoutlined in ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E). These caps alsomeet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reversedonning. Look for the official reverse donning logo to determine if your hard hatmay be worn backwards without voiding approvals.

Thermal-E Assemblies Color w/Fas-Trac

White 10100626

Yellow 10100625

Red 10100627

Dark Gray 10100629

Orange 10100628

Replacement SuspensionFas-Trac Suspension (61/2–8) for Thermal-E Cap ONLY 10073406

Use only MSA’s Fas-Trac Suspension designed for Thermal-E Helmets.Use of any other suspension will reduce the energy-absorbing ability ofthe pro tec tive helmet, which can result in serious injury or death.

Thermal-EProtective Cap

New!



Skullgard® Protective Caps and Hats

Replacement SuspensionsSize Staz-On Fas-Trac Swing-Ratchet 1-Touch

Std (61/2–8) 454231 473334 816654 (61/2–75/8) 10061128

Large (7–81/2) 468096 478454 • •

Skullgard Caps and Hats feature heavy-duty con struc tion for use in steel mills and other heavyindustries where elevated tem per a tures are common. Skullgard Caps and Hats meet all applicablerequirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class G). These capsand hats also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT].

Skullgard with Swing-Ratchet Suspension

Skullgard Protective Cap

Skullgard Protective Hat

Third-partycertified by:

Skullgard AssembliesSkullgard Cap Skullgard Hat

w/Staz-On w/Fas-Trac w/Swing-Ratchet w/Staz-On w/Fas-Trac

Natural Tan 454617 475395 816651 454664 475407

White 454618 475396 • 454665 475408

Yellow 454619 475397 • 454666 •

Red 454620 • • • •

Green 454621 • • 454668 •

Grey 454622 • • • •

Blue 454623 • • • •

Orange 454626 • • 454673 •

Hi-Viz Red-Orange* 458702 • • • •

Alternative Skullgard AssembliesLarge Skullgard Cap with Staz-On suspension, natural tan 82018

Large Skullgard Cap with Fas-Trac suspension, natural tan 475405

Standard Skullgard Cap with Staz-On suspension, lamp bracket and cord holder, natural tan 460409

Skullgard Hat with Staz-On suspension, lamp bracket and cord holder, natural tan 460389

Skullgard Cap with Fas-Trac suspension, welder’s lugs, natural tan 482002

* Skullgard Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009.Look for the official hi-visibility marking [HV] on the helmet's ANSI label.




115



Super-V™ Protective Caps

Use only MSA’s Fas-Trac Sus pen sion designed for Vanguard Helmets. Use of any othersuspension will reduce the energy-absorbing ability of the protective helmet, whichcan result in serious personal injury or death.

Vanguard Caps are designed to provide limited impact and penetration protectionin the event of a top or lateral blow to the head. Vanguard Caps meet all applicablerequirements for a Type I and II (top and lateral impact) helmet as outlined inANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E).

Vanguard Cap with striping

Replacement SuspensionFas-Trac Suspension for Vanguard Caps only (61/2–8) 804631

Vanguard Protective Cap

Vanguard Assemblies Color w/Fas-Trac

White 804940

Yellow 804939

Red 804944

Hi-Viz Orange* 804947

Blue 804946

Vanguard™ Protective Caps




* Vanguard Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009.Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Super-V Caps consist of a shell, foam liner, and suspension system that work together to provide limitedimpact and penetration protection in the event of a top or lateral blow to the head, as well as limitedprotection against contact with high-voltage conductors.

Super-V Caps meet all applicable requirements for a Type I and II (top and lateral impact) helmet as outlinedin CSA Z94.1-2005 (Class E) and a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E).

These caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT].

Replacement SuspensionFas-Trac Suspension for Super-V Caps only (61/2-8) 818276

Super-V Protective Cap Super-V Assemblies Color w/Fas-Trac

White C217091

Yellow C217093

Red C217095

Orange C217094

Blue C217092

Navy Gray C217097

Hi-Viz Orange* C217100

Green C217096

Gold C217098

Black C217140

Silver C217099

* Super-V Cap meets the voluntary standard for hi-visibilityas prescribed by ANSI/ISEA Z89.1-2009. Look for the officialhi-visibility marking [HV] on the helmet's ANSI label.



Bump CapsBump Caps protect the scalp by reducing exposure to abrasions and lacerations causedby minor bumps to the head. The key word is “minor” bumps. Designed for work in areassuch as pest control, meter reading, food/beverage processing, meat packing, and auto repair.

Bump Caps feature perforated sides for increased ventilation, an inner foam pad foradded comfort, and an adjustable suspension (61/2 - 8). Bump Caps are appropriate ONLYfor work areas that do NOT require ANSI-compliant head protection.

Bump Caps are NOT safety helmets and do NOT meet OSHA nor ANSI requirements for head protection. DO NOT USE as sport safety helmet. DO NOT USE when ANSI-compliant head protectionis required or needed.

Bump Cap

Designed for work in low-ceiling areasThe Comfo Cap Protective Cap is widely used in the mining industry for head protection.Made of light weight, tough polycarbonate plastic, the shell helps resist top impacts.Molded cross ridges on the crown provide increased strength and rigidity.

Comfo Caps meet all applicable requirements for a Type I (top impact) helmet as outlinedin ANSI/ISEA Z89.1-2009 (Class G). These caps also meet the ANSI/ISEA Z89.1-2009voluntary standard for low temperature [LT].

Replacement SuspensionsStaz-On Suspension (61/2 – 8) 454231

Fas-Trac Suspension (61/2 – 8) 473334

1-Touch Suspension (61/2 – 8) 10061128

Comfo Cap with Lamp Bracketand Cord Holder




Comfo Cap® Protective Caps

Comfo Cap Assemblies Color w/ Staz-On w/Fas-Trac

White 91522 475336

Blue 91586 •

Yellow 91585 •

Orange 91589 •

Red 91590 •

Green 91584 •

Black 82769 •

Bump Cap Assemblies Color w/Fas-Trac Suspension

Blue 10033650

Yellow 10033651

White 10033652

Red 10033653

Orange 10033654

Green 10033655


Custom

er Service

Center: 1-800-MSA-2222 • W

ebsite:

www.MSAnet.com

MS

A H

ard

Hat

Acc

esso

ries C

ompa

tibili

ty C

hart

*Meets

CSA

Z94.3.

**

For

use

with

welding

shields

Prod

uct

Part

No.

V-G

ard®

Sl

otte

d Ca

p

V-G

ard

Non

-Slo

tted

H

at

Smoo

thDo

me®

Slot

ted

Cap

Adva

nce®

Sl

otte

d Ca

p

Topg

ard®

Sl

otte

d Ca

p

Topg

ard

Non

-Slo

tted

H

at

Ther

mal

-E™

/Th

erm

alga

rd®

Slot

ted

Cap

Skul

lgar

d®

Non

-Slo

tted

Ca

p

Skul

lgar

d N

on-S

lott

ed

Hat

Vang

uard

™

Slot

ted

Cap

Supe

r-V®

/La

rge

V-G

ard

Slot

ted

Cap

Bum

pCa

p

Face

shie

ld F

ram

es (v

isor

not

incl

uded

)

Defender®

+ Fa

ceshield

Frame with

lockdo

wn

10021614*

Defender +

Faceshield

Frame with

out lockdow

n10021616

Defender +

Faceshield

Frame with

lockdo

wn

10021615

Tempgard®Defender

+ Faceshield

Fram

e for

elevated

temperatures, w/o

lockdown

10031191

Defender +

Easy Release

Frame with

lockdo

wn (black)

10080783

Defender +

Easy Release

Frame with

lockdo

wn (black)

10080784

Defender +

Easy Release Fram

e with

out lockdow

n10080785

Defender +

Easy Release Fram

e with

lockdo

wn (brig

ht orang

e)10080786

Slot

adapter

(for

Defender +

Easy Release fra

me)

10090221

Defender +

Frame with

Instant R

elease

attachm

ent, with

out lockdow

n10037098

**

Defender +

Universal

Foldb

ack Faceshield

Frame (dielectric

[plastic] for

cap)

10016742

Defender +

Universal

Foldb

ack Faceshield

Frame (dielectric

[plastic] for

hat)

10005383

*

Defender +

Universal

Foldb

ack Faceshield

Frame (m

etal

for cap)

488160

Defender +

Universal

Foldb

ack Faceshield

Frame (m

etal

for h

at)

488159

Defender +

Universal

Foldb

ack Faceshield

Frame (m

etal)

10079072

Face

shie

ld a

nd V

isor

Ass

embl

ies

Tree

Trimmer’s Kit (includ

es orang

e slo

tted

V-Gard Cap)

10090650

Wel

ding

Att

achm

ents

Lugs

only, for instant

release slo

tted

caps

468771

Lugs

only, for instant

release no

n-slo

tted

caps

48733

Instant R

elease

(metal) and

lugs

for slotted

caps

485460

Instant R

elease

(metal

with

stop

) and

lugs

for n

on-slotted

caps

91385

Adapter for

Welding

Helmets a

nd Sparkgards for

slotted caps

488525

EC Adapter

Kit for slotted

caps (po

sitive po

sitioning

type)

806211

Hea

ring

Acce

ssor

ies

Soun

d Co

ntrol™

HPE

for slotted

caps

10061272

Soun

d Co

ntrol E

XC for slotted

caps

10061230

Soun

d Co

ntrol XLS

for slotted

caps

10061535

Soun

d Blocker™

26 (fo

r use

with

Defender +

Faceshield

Frames

ONLY)

10026398

Soun

d Blocker 26 for n

on-slotted

caps

10022021

Soprano™

Muff

for h

ats

10034487

left/RIGH

T™, LOW, w

hite

for slotted

caps

10087439

left/RIGH

T, MED

, blue for slotted

caps

10087429

left/RIGH

T, HIGH

, yellow

for slotted

caps

10087422

standards for industrial head protection protection.pdfstandards for industrial head protection...

Documents