standard slurry pump - price pumps australia
TRANSCRIPT
Price Pumps Australia Phone: +61 7 49985070 Mob 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 0
Standard Slurry Pump Model: PPMA, PPMM, PPML, PPMYU
ABN 17 154 031 802 21 Ginger St, Paget Mackay Qld Australia 4740
PO Box 5709, Mackay Mail Centre Qld Australia 4741 Ph: +61 07 4998 5070 Fax: +61 07 4952 1944
Mobile: +61 0409 827 290 Email: [email protected]
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia Phone: +61 7 49985070 Mob +61 0409827290 [email protected] www.pricepumpsaustralia.com.au Page 1
CONTENTS
Section 1 – Standard Slurry Type PPMA, PPMM
1.1 General Introduction 3
1.2 Product Features 4
1.3 Construction Drawing 5
1.4 Construction Drawing for Rubber Lined Pump 6
1.5 Outline Drawing 7
1.6 Outline Dimensions 7
1.7 Selection Chart 9
Section 2 – Standard Slurry Type NO
2.1 General Introduction 12
2.2 Product Features 12
2.3 Construction Drawing 13
2.4 Outline Drawing
2.5 Outline Dimensions
2.6 Selection Chart
Section 3 – High Efficiency Slurry Type NBF
3.1 General Introduction 14
3.2 Product Features 15
3.3 Construction Drawing of Bearing Assembly
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia Phone: +61 7 49985070 Mob +61 0409827290 [email protected] www.pricepumpsaustralia.com.au Page 2
PPMA, PPMM
Section 1 - Standard Slurry Pump Type PPMA, PPMM 1.1 General Introduction Type PPMA and PPMM pumps are cantilevered, horizontal, centrifugal slurry
pumps. They are designed for handling high abrasive, high density slurries in the
metallurgical, mining, power, building and other industrial departments. These
types of slurry pumps are typically used in process plant transfers, wet waste
processes, recycling-washing plants, sand plant duties, heavy minerals
processing, mineral recovery, and chemical process plants.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia Phone: +61 7 49985070 Mob +61 0409827290 [email protected] www.pricepumpsaustralia.com.au Page 3
1.2 Product Features: - Wear resistant metal or rubber wet end parts
- Long service life
- Wide options for impeller
- Various types of pump seals to suit different working condition
- Grease or oil lubrication
- Discharge branch can be positioned at intervals of 45 degree
- Can be installed in multistage series.
- Easy to maintain
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia Phone: +61 7 49985070 Mob +61 0409827290 [email protected] www.pricepumpsaustralia.com.au Page 4
1 Bearing Assembly 11 Packing
2 Base 12 Shaft Sleeve
3 Volute Liner 13 Stuffing Box
4 Throatbush 14 Discharge Joint
5 Cover Plate 15 Suction Joint
6 Frame Plate 16 Gland
7 Impeller 17 Lantern Ring
8 FPL Insert 18 Expeller
9 Shaft Sleeve Spacer 19 Neck Ring
10 Lantern Restrictor 20 Expeller Ring
1.3 Construction Drawing
"
• Beside gland seal and centrifugal seal, Mechanical seal can be supplied also.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia Phone: +61 7 49985070 Mob +61 0409827290 [email protected] www.pricepumpsaustralia.com.au Page 5
1.4 Construction Drawing for Rubber Lined Pump
For type PPMA, PPMM and PPML pumps, there are also rubber wet parts available:
1. Frame Plate Liner
2. Impeller
3. Cover Plate Liner
4. Throatbush
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 6
Type A B C D U E F G H J K L M N
1.5/1B-PPMA 583 295 248 197 28 79 206 181 98 171 46 - 143 254
2/1.5B-PPMA 592 295 248 197 28 79 217 205 114 184 33 - 143 254
3/2C-PPMA 768 406 311 254 42 121 281 238 138 210 71 - 175 356
4/3C-PPMA 843 406 311 254 42 121 354 292 149 262 24 - 175 356
4/3D-PPMA 943 492 364 330 65 164 353 292 149 262 100 - 213 432
6/4D-PPMA 1021 492 364 330 65 164 421 406 229 338 11 - 213 432
6/4E-PPMA 1178 622 448 457 80 222 433 406 229 338 138 - 257 546
8/6E-PPMA 1302 622 448 457 80 222 557 551 318 460 - 62 257 546
8/6R-PPMA 1360 680 590 350 85 215 - 511 318 460 - 170 490 560
10/8E-PPMM 1337 622 448 457 80 222 584 613 381 470 - 83 257 546
10/8R-PPMM 1395 680 590 350 85 215 - 613 381 470 - 190 490 560
10/8ST-PPMA 1748 1150 780 650 120 280 692 673 419 635 27 - 620 900
12/10ST-PPMA 1816 1150 780 650 120 280 762 755 464 674 - 65 620 900
14/12ST-PPMA 1873 1150 780 650 120 280 812 937 629 832 - 224 620 900
16/14TU-PPMA 2320 1460 1050 900 150 350 953 1048 660 889 - 84 860 1200
1.5 Outline Drawing
n-d,
G
II
.....,
Q
Outline Dimensions
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 7
Suction Flange Discharge Flange Pump Weight
Kg V T s n-d Do D1 D2 n-d1 Do D1 D2 n-d2 Metal Rubber
181 38 24 4 - 14 152 38 114 4 - 16 165 25 127 4 - 16 91 77
184 38 24 4 - 14 184 51 146 4 - 19 165 38 127 4 - 19 104 118
233 48 32 4 - 19 216 76 178 4 - 19 184 51 146 4 - 19 191 154
270 48 32 4 - 19 279 102 235 4 - 22 229 76 191 4 - 22 263 236
279 67 38 4 - 22 279 102 235 4 - 22 229 76 191 4 - 22 363 290
318 64 38 4 - 22 337 152 292 4 - 22 279 102 235 4 - 22 626 454
351 76 54 4 - 29 337 152 292 4 - 22 279 102 235 4 - 22 728 635
402 76 54 4 - 29 406 203 356 8 - 22 368 152 324 8 - 21 1473 982
312 70 50 4 - 28 406 203 356 8 - 22 368 152 324 8 - 22 1655 -
403 76 54 4 - 29 502 254 445 8 - 29 432 203 375 8 - 29 1625 1202
314 70 50 4 - 28 502 254 445 8 - 29 432 203 375 8 - 29 1836 -
439 125 80 4 - 48 502 254 445 8 - 29 432 203 375 8 - 29 3750 3130
461 125 80 4 - 48 527 305 470 12 - 25 527 254 470 12 - 25 4318 3357
486 125 80 4 - 48 585 356 521 12 - 25 552 305 495 12 - 25 6409 4672
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 8
1.6 Selection Chart
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 9
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 10
PPML
Section 2 - Standard Slurry Pump Type PPML 2.1 General Introduction: Type PPML pumps are cantilevered, horizontal, centrifugal slurry pump. They is
designed for handling light abrasive, low density slurries in the metallurgical, mining,
power, building and other industrial departments. This type of slurry pump are
typically used in process plant transfers, wet waste processes, recycling-washing
plants, sand plant duties, heavy minerals processing, mineral recovery, and
chemical process plant.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 11
2.2 Product Features: - Wear resistant metal or rubber wet end parts
- Long service life
- Wide options for impeller
- Various types of pump seals to suit different working condition
- Grease or oil lubrication
- Discharge branch can be positioned at intervals of 45 degree
- Can be installed in multistage series.
- Easy to maintain.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 12
2.3 Construction Drawing
1. Bearing Assembly 11.
FPL Insert
2. Base 12.
Stuffing Box
3. Shaft Sleeve 13.
Lantern Restrictor
4. Shaft Spacer 14.
Expeller Ring
5. Volute Liner 15.
Gland
6. Frame Plate 16.
Lantern Ring
7. Impeller 17.
Expeller Ring
8. Cover Plate 18.
Expeller
9. Suction Joint 19.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 13
Neck Ring
10. Discharge Unit
• Beside gland seal and centrifugal seal, Mechanical seal can be supplied also.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 14
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 15
Type A B C D E F G n-d H J K L M
20A-PPML 461 159 241 286 25 210 28 4 - 18 57 20 145 89 90
50B- PPML 624 143 254 295 24 248 38 4 - 14 80 28 197 191 136
75C- PPML 813 175 356 406 32 311 48 4 - 19 120 42 254 253 163
100D- PPML 950 213 432 492 38 364 64 4 - 22 163 65 330 280 187
150E- PPML 1218 257 546 822 54 448 76 4 - 29 220 80 457 376 237
200E- PPML(R) 1334 257 546 622 54 448 76 4 - 29 220 80 457 413 306
250E- PPML 1348 257 546 622 54 448 76 4 - 29 220 80 457 411 324
250R- PPML 1406 490 560 680 50 590 70 4 - 28 216 85 350 322 324
300S- PPML 1720 640 760 920 70 780 90 4 - 35 280 120 450 415 300
350S- PPML 1776 640 760 920 70 780 90 4 - 35 280 120 450 425 340
400ST- PPML 1840 620 900 1150 80 780 125 4 - 48 280 120 650 480 375
450ST- PPML 1875 620 900 1150 80 780 125 4 - 48 280 120 650 500 400
550TU- PPML 2400 860 1200 1460 95 1050 150 4 - 79 350 150 900 625 500
2.4 Outline Drawing
I
H
"I 1 -
f' c
E B L 0
2.5 Outline Dimensions
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 16
2.6 Selection Chart
Pump Head Size Suction Flange Discharge Flange
N S Q R P O. D I. D
C – C
BET.
HOLES
HOLE O. D I. D C – C
BET.
HOLES
HOLES
86 144 - - 128 114 25 83 4 - 14 102 20 73 4 - 14
114 - 155 - 163 184 75 146 4 - 19 165 50 127 4 - 19
146 102 - - 204 229 100 191 4 - 19 203 75 165 4 - 19
190 118 - - 262 305 150 260 4 - 22 229 100 191 4 - 22
248 155 - - 324 368 200 324 8 - 19 305 150 260 8 - 19
292 199 - - 401 445 250 394 8 - 22 382 200 337 8 - 22
438 257 476 603 470 552 305 495 8 - 32 483 254 425 8 - 32
438 257 476 603 470 552 305 495 8 - 32 483 254 425 8 - 32
475 265 599 634 570 560 350 500 12 - 26 530 300 470 12 - 26
530 295 643 691 620 640 400 580 12 - 26 590 350 530 12 - 26
600 343 747 809 740 720 450 650 12 - 33 685 400 615 12 - 33
660 375 814 872 800 770 500 700 12 - 33 740 450 670 12 - 33
860 453 1055 1142 975 975 650 880 12 - 39 900 550 800 12 - 39
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 17
NBF
Section 3 - High Efficiency Slurry Pump Type PPMYU
3.1 Brief Introduction: Type PPMYU is a single casing, horizontal, centrifugal slurry pump. Its
performance is similar to type PPMA, but the efficiency is above 10% higher
than the same size of PPMA type. Considering the flow characteristic of
slurry in the pump chamber, we designed the hydraulic model. Meanwhile
the drive part is oil lubricated, through the circulation of oil decreases
bearing temperature, thus prolonging the pump service life. Due to the single
casing design, this reduces the pump weight, easy for assembly and lower
cost. Suitable for single stage or lower stage in series.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 18
3.2 Product Features:
- Wear resistant metal wet end parts
- Long service life
- Various types of pump seals to suit different working condition
- Oil lubrication
- Discharge branch can be positioned at intervals of 45 degree
- Single casing structure
- Easy to maintain.
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 19
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 20
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 21
3.3 Construction Drawing of Bearing Assembly
• Gland seal, centrifugal seal and mechanical seal are all available.
• Gland seal, centrifugal seal and mechanical seal are all available.
1. Bearing Assembly
2. Casing Bolt
3. Casing Link Bolt
4. Stuffing Box
5. Back Liner
6. Impeller
7. Casing
8. Adaptor Plate
9. Gland
10. Shaft Sleeve
11. Packing
12. Lantern
Restrictor
13. Shaft Spacer
14. Adjusting Screw
The drive part of the slurry pump is lubricated by grease, due to the big loads and harsh
working conditions, easily causes the rolling friction and the generated iron scrap is no easy
education, which results in the bearing wear. Heat is not easy to spread out, bearing
overheating and short service life. This innovative circulation oil lubrication on slurry pump
drive system makes great contribution. Change the grease lubrication to oil lubrication, the
lubricating oil is recycling, which has the effect of lubrication, cooling, cleanness and seal
effect, and solve the problem of bearing overheating and short service life.
1 Base 6 Bearing 11 Bearing Housing
2 Holder Stud 7 Oil Chamber Cover 12 Bearing Gland Seal
3 Labyrinth Locknut 8 Shaft 13 Front Bearing Gland
4 Bearing Sleeve 9 Release Seal 14 Splash Guard
5 Back bearing Gland 10 Bearing Housing Clamp 15 Adjusting Screw
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 22
Heavy Duty Pumps For Mining and Industry
Price Pumps Australia
Phone: +61 7 49985070 Mob +61 0409 827 290 [email protected] www.pricepumpsaustralia.com.au Page 23
Ph: +61 07 4998 5070 Fax: +61 07 4952 1944
Mobile: +61 0409 827 290 Email: [email protected]
www.pricepumpsaustralia.com.au 21 Ginger St, Paget Mackay Qld Australia 4740
PO Box 5709, Mackay Mail Centre Qld Australia 4741
As Price Pumps Australia’s policy is one of constant improvement, we reserve the right to
make specification changes without notice and without incurring liability