Version 2.0 1 |2

AIO-STA-12

anchorage point for personal safety (SAP), fastening point for INNOTECH® lifeline and rail systems

optimal end or corner point for INNOTECH® lifeline systems

suitable for abseiling when used with EAP-ABP-10-30 (up to 500 mm)

low force transmission thanks to plastic deformability and high base stability

certifiedaccordingtothestateoftheart:

EN795:2012TYPAandC CEN/TS16415:2013 DIBt allgemeine bauaufsichtliche Zulassung (DIBt general building supervision approval)

AIO-STA-12 is a component of the INNOTECH lifeline systemand can be mounted on a wide range of substructures.

AIO-STA-12 Standard postBASE PLATE 300 X 300 MM IN AIO-LIFELINE SYSTEM (EN 795 C) Mountableon:concrete,hollowconcreteslab,trapezoidalsupportingsheet, steel construction, etc.Postheight:300/400/500/600/700/800mm,Ø48mmBaseplatedimensions:300x300x8mmMaterial:galvanisedsteel

Thermal insulation cover and sealing band can be found under accessories!Be sure to order appropriate fastening sets! (see below)Special lengths upon request!

Standard post AIO-STA-12 EN

Concrete Wood construction Trapezoidal sheet Steel construction

APPROVAL:

Z-14.9-732

INNOTECH® Arbeitsschutz GmbH,Laiz ing10,A-4656KirchhamT:+43761922122-0,F: -147,off ice@innotech.at , www.innotech.at

AIO-STA-12

Version 2.0 2 |2

WOOD CONSTRUCTION

BEF-104CONCRETE (min. C20/25) – cracked and uncrackedMaterial:stainlesssteel(AISI316)Contents:4xanchorbolts,

FISCHERFAZII12/10A4

Boreholedepthmin.105mm(Ø12mm)!

BEF-107HOLLOW CONCRETE SLAB (min. C50/60, B4)Material:galvanisedsteelContents:8xhollowcoreanchor,FISCHERFHY-M10x52

8xhexboltM10x60(DIN933) 8xwasher(M10)

Hollow slab cross-section (concrete thickness) min. 30 mm!

2x BEF-209WOOD – SOLID WOOD (min. 80 mm)Material:galvanisedsteelContents:4xfasteningbolts(8x80mm)

4xwashers(coniform)Minimumthicknessofsolidwoodsurface80mm!

Use2xBEF-209incombinationwiththeAIO-STA-12post!Product:EAP-QUAD-11/AIO-STA-12

BEF-210WOOD – OSB Panel thickness (min. 22 mm)Material:galvanisedsteelContents:48xfasteningbolts(6x50mm)

12xwashers(coniform)OSB-panel thickness min. 22 mmProduct:AIO-STA-12

ADHESIVE ANCHOR4xM12threadedposts4xwashers4xM12lockingnutsor4xnutswithspringwashersPenetrationdepth:min.100mmInjectionmortar:FischerFISSB390S

HiltiHY200

CONCRETE

BEF-303TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial:galvanisedsteelDimensions:840x840x40mmSheetmetalthickness:min.0.6mm

foroptimalloaddistributionontrapezoidalsupporting sheet, widely varied useability

different possibilities to combine withBEF-303-1orBEF-303-3

STEEL CONSTRUCTION

TRAPEZOIDAL SHEET

WELDINGWeldingseammin.A5and80mmlongoneachbaseplateside

Removepowderorzinccoatingproperlybeforewelding.

STEEL SCREWS4xM12steelscrews,steelquality≥5.64xM12lockingnutsor4xnutswithspringwasher

use appropriate washers on the 4 corner boreholes

BEF-401-12STEEL CONSTRUCTION,COUNTER PLATE (150 x 150 x 8 mm) Material:galvanisedsteelMax.widthofsteelconstruction:105mm

BEF-307-1TRAPEZOIDAL SUPPORTING SHEET, STABILISATION BARMaterial:stainlesssteelPackage:2xsupportbar

4xborefastener 4xcentringwasher

Sheetmetalthickness:min.0.63mm

OnlyincombinationwithBEF-307orBEF-404tostabilizecorner-andendpoints!!

BEF-307-2OSB PANEL, SPECIAL ANCHOR BOLTMaterial:stainlesssteel(AISI304),plasticPackage:4xspecialanchorboltOSB-panelthickness:18mm-30mm

BEF-404TRAPEZOIDAL SUPPORTING SHEET, SCREW FASTENERMaterial:galvanisedsteelPackage:4xcounterplateincl.screwmaterial,sealingwasherSheetmetalthickness:min.0.7mmProduct:AIO-STA-12LimiteduseabilityintheAIOlifelinesystem(BEF-307-1)!

C 20/25

BEF-102CONCRETE (min. C20/25) – Solid concrete with evened surfaceMaterial:galvanisedsteelContents:4xanchorbolts,FISCHERFBN12/120+140

Special fastening - product-specific testing required!

APPROVAL:

Z-14.9-732

APPROVAL:

Z-14.9-732

APPROVAL:

Z-14.9-732

Concrete Wood construction Trapezoidal sheet Steel construction

INNOTECH® Arbeitsschutz GmbH,Laiz ing10,A-4656KirchhamT:+43761922122-0,F: -147,off ice@innotech.at , www.innotech.at