standard equipment optional equipment new 7 series hyundai... · technology in cab design...
TRANSCRIPT
Standard Equipment Optional Equipment
ISO standard cabAll-weather steel cab with all-around visibilitySafety glass windowsRaise-up type windshield wiperSliding fold-in front windowSliding side windowLockable doorHot & cool boxAccessory box & Ash-trayAM/FM radio and cassetteRadio remote switch
Computer Aided Power Optimization(New CAPO) system
2-power mode, 3-work mode, 2-user modeAuto deceleration & one touch deceleration systemAuto warm up systemAuto overheat prevention system
Self diagnostic systemCentralized monitoring
LCD displayEngine speedClock & Error code
GaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gauge
WarningFuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner clogging
IndicatorPower boost.Preheat & Engine warming-upOne touch decel
Starting Aid (air gride heater), cold weather
Door and cab locks, one keyTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystick, pilot-operatedConsole box tilting system (LH.)Three front working lightElectric hornBatteries (2 x 12V x 200AH)Battery master switchRemovable reservoir tankAutomatic swing brakeWater separator, fuel lineBoom holding systemArm holding systemCounterweight (9200kg, 20280lb)Boom (7.06m, 23’ 2”)Arm (3.38m, 11’ 1”)Track shoes (600mm, 23.6”)Track rail guardTravel alarm
Sun visor for cabin insideFuel filler pump (35 /min, 9.2 USgpm)Beacon lampSafety lock valve for boom cylinder with overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (cramshell, etc)Accumulator, work equipment lowering12 volt power supply (24V DC-12V DC converter)Electric transducerAir-conditioner(5,000kcal/hr, 20000BTU/hr)Heater (7500kcal/hr, 30000BTU/hr)Heater & Defroster Various optional Arms
Super short arm (2.40m, 7’ 10”)Short arm (2.90m, 9’ 6”)Long arm (4.00m, 13’ 1”)Super long arm (4.50m, 14’ 9”)
Various optional Buckets (SAE heaped)Standard bucket (2.15m3, 2.81yd3)Narrow bucket (1.38m3, 1.80yd3)Light duty bucket (1.84m3, 2.41 yd3)Light duty bucket (2.56m3, 3.35yd3)Light duty bucket (2.79m3, 3.65yd3)Light duty bucket (3.03m3, 3.96yd3)Heavy duty bucket (2.20m3, 2.88yd3)Rock bucket (2.20m3, 2.88yd3)
Cabin anti-vandalism kitCabin lightsFOG (Falling object guard, ISO/DIS 10262)
Track shoesTriple grousers shoe (700mm, 28”)Triple grousers shoe (750mm, 30”)Triple grousers shoe (800mm, 32”)Triple grousers shoe (900mm, 36”)
Lower frame under coverPre heating systemTool kitOperator suitSpecial cowl
Air vent type side door
ROBEX 450LC-7
HEAVY INDUSTRIES CO., LTD.
CUMMINS QSM11-C Engine :263 kW/353 HP
Operating Weight :43,700 ~ 46,500 kg (96,300 ~ 102,500 lb)
Bucket Capacity, SAE :1.38 ~ 3.03 m3 (1.80 ~ 3.96 yd3)
CRAWLER EXCAVATOR
Photo may include optional equipment.
Tier II EngineTier II Engine
NEW 7 SERIES
PLEASE CONTACT
www.hyundai-ce.com 2003. 12 Rev 2.
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurment rounded off to nearest pounds or inches.
HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03
NEW 7 SERIES ROBEX 450LC-7
A new chapter in construction equipmenthas now begun.Making the dream a reality.
Built for Maximum Power, Performance, Reliability.
Photo may include optional equipment.
TECHNOLOGY IN CAB DESIGN 04 / 05Technology in Cab Design
NEW 7 SERIES ROBEX 450LC-7
Operator’s Comfort is Foremost.Wide Cab Exceeds Industry Standards.
VisibilityEven more visibility than before, for safer, more efficient operating.
Excellent VentilationVentilation has been improved by the addition of the larger fresh air intake system,
and by providing additional air flow throughout the cab.
Sliding front and side windows provide improved ventilation.
A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator EnvironmentThe control levers and seat can be adjusted to provide maximum operator comfort.
The seat is fully adjustable for optimum operating position, reducing operator
fatigue.
Console boxes slide forward and backward for improved accessibility.
The proportional pressure controls reduce unnecessary exertion while ensuring
precise operation.
Large windows allow excellent visibility in all directions.
Low noise designThe Robex 7series was designed with low operation noise in mind.
Hyundai engineering helps to keep interior and exterior noise levels to a minimum.
The cab's noise levels have been additionally reduced by improving the door seals
for the cab and engine compartments.
An insulated diesel engine compartment with sound-damping material also reduces
noise.
123
Wide, Comfortable Operating Space Steel Cover Sunroof Dial Type Engine Speed Switch and Key Switch
Centralized control pannelHorn buttonOption buttonRemote Radio control
Travel leverClusterOne touch decel buttonHour meter
Travel pedalFully adjustable suspension seatSafety leverPower boost button
Joystick control leverAir Conditioner and Heater controller
CAB
The best working conditions in a pleasant environment.
CAB
OPERATING ENVIRONMENT 06 / 07Operating Environment
NEW 7 SERIES ROBEX 450LC-7
Minimization of Shock and Vibrationthrough Cab Mounting SystemThe application of Viscous Mounting to thecabin support provides the operator with amuch improved ride. The operator work efficiency will increase asthe shock and noise level in the cabindecreases.
Rear Emergency Exit WindowRear Exit Window is designed with easy
exit foroperator's safety.
Highly Sensitive Joystick andEasy EntranceNew joystick grips for precise controlhave been equiped with double switches.
(Left: Power boost / One touchdeceleration, Right: Horn/Optional)
Wide, Comfortable Operating SpaceAll the controls are designed and positioned according to the latest ergonomicresearch.Reinforced pillars have also been added for greater cab rigidity.
Smooth Travel Pedal and Foot Rests
Improved Intelligent DisplayInstrument Panel is installed in front ofRH console box. It is easy to check all critical systemswith easy-to-read indicators.
Easy-to-Reach Control PanelsSwitches and other essential controls arelocated near the operator. This helps keep operator movement to aminimum, enhancing control with lessoperator fatigue.
Wide Cab with Excellent VisibilityThe cab is roomy and ergonomicallydesigned with low noise level and goodvisibility.A full view front window and large rearand side windows provide excellentvisibility in all directions.
Remote Radio Control andDeluxe Cassette
Raise-up Wiper and Cabin LightsRaise-up wiper has enhanced for thebetter front view. Cabin Lights enhancessafety by brightly lighting thesurroundings during night work(optional)
Storage box and Cup HolderAn Additional storage box and cup holderare located behind operator’s seat, and itkeeps food and beverages cool or hot.
CUMMINS QSM11-C EngineThe six cylinders, turbo-charged, 4 cycle,Charger air cooled engine is built for power,reliability, economy and low emissions.This engine meets Tier emissions regulations.
Setting the standard in clean,efficient power.The QSM uses advanced electronic controls tomeet the toughest emissions standardswithout compromising anything.Exceptional fuel efficiency, durability,dependability and the highest power-to-weightratio in its class are still trademark QSMqualities.Plus, the QSM now runs quieter and cleaner.
The QSM engine comes with powerfulElectronic Control Module (ECM).Using input from sensors located throughoutthe engine, it governs the timing and meteringof fuel to the engine. Fuel is injected into thepower cylinder using Cummins dual-pulsetechnology. This injection method helpsreduce noise levels as it increasesresponsiveness and improves fuel efficiency.
08 / 09Advanced Hydraulic System Increased Higher Performance
NEW 7 SERIES ROBEX 450LC-7
ADVANCED CAPO SYSTEM
Advanced CAPO SystemThe Advanced CAPO(Computer Aided PowerOptimization) system maintains engine andmutual pump power at optimum levels. Modeselections are designed for various work loadsand maintaining high performance whilereducing fuel consumption. Features such as auto deceleration and powerboost are included in the system. The system monitors engine speed, coolanttemperature, and hydraulic oil temperature.Contained within the system are selfdiagnostic capabilities which are displayed byerror codes on the cluster.
Self Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric and hydraulicmalfunctions and displays them on the LCDmonitor of the cluster through error codes.This controller has the capacity to identify 48distinct types of errors. As the informationfrom this device, such as engine rpm, mainpump delivery pressure, battery voltage, hyd.temperature, and the state of all types ofelectric switches, provides the operator with amuch more exact state of machine operatingcondition. This makes the machine easier totroubleshoot when anything does go wrong.
Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.
Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping overan extended period in neutral position.
Auto Deceleration SystemWhen remote-control valves are in neutralposition more than 4 seconds, CPU controllerinstructs to reduce engine speed. This decreases fuel consumption and reducescab noise levels.
One Touch Decel SystemWhen the one touch decel switch is pressed,CPU controller controls the accel actuator toreduce engine speed to low idle rpm. And thenthe one touch decel switch is pressed again,the engine speed recovers.
Max. Flow Cut-off SystemFor precise control and finishing work, theMax. Flow Cut-off System reduces pump flow,thus allowing smooth operation.
Automatic Engine Overheat PreventionIf the engine coolant temperature gets toohigh, the CPU controller lowers the enginespeed and cools the engine.
Anti Restart SystemThe new system protects the starter fromrestarting during engine operation, even if theoperator accidentally turns the start key again.
Power boost control SystemWhen the power boost system is activated,digging power increases about 10%. It isespecially useful when extra power istemporarily needed, for instance, whendigging hard earth and rock, or if the bucketteeth are stopped by a stubborn tree root.
Automatic Warming-up SystemAfter the engine is started, if the enginecoolant temperature is low, the CPU controllerincreases the engine speed and automaticallyincreases the pump flow rate to warm up theengine more effectively.
Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is deliveredto the actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speedcan be proportionally controlled.
Hydraulic Damper in Travel PedalImproved travel controllability & feeling byshock reducing when starting and stopping.
POWER MODEH mode: High power S mode: Standard power
WORK MODE: Heavy duty work: General work: Breaker
USER MODEM mode: Maximum PowerU mode : Memorizing Operator’s Preferable Power Setting
NEW MODE CONTROL SYSTEM
Track Rail Guide & AdjustersDurable track rail guides keep track links in place. Track adjustment is made easy with standardgrease cylinder track adjusters and shock absorbing springs.
Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground andworking on wet sites through high tensile strength steel panels, with highly durable upper andlower rollers and track guards.Long undercarriage incoporates heavy duty excavator style components.X-leg type center frame is integrally welded for maximum strength and durability.
Powerful and PreciserSwing ControlImproved shock absorbingcharacteristics make stopping aprecise and smooth action
Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silent operation.The design includesbucket link durability and anti wearcharacteristics. Additional reinforcementplates on cutting edge section. Reinforcedbucket is made with thicker steel andadditional lateral plate.
RELIABILITY & SERVICEABILITY 10 / 11Reliability & Serviceability
NEW 7 SERIES ROBEX 450LC-7
Centralized Electric Control Box andEasy Change Air Cleaner AssemblyElectric control box and Air cleaner are centralized in one or the samecompartment for easy service.
Highly efficient Hydraulic PumpPump output and Hydraulic tank capacityhave been increased.A pilot pump has been installed resulting in improved control sensitivity.
Large tool box for extra storage
Durability of structure proven through FEM
(Finite Element Method) analysis and long term durability test.
Full open doors and master key systemprovide easy access for servicing.Handrails and foot steps are applied for safety
Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view ofcomponent allows easy maintenance and repair.
Easy to maintain engine componentsThe cooling and preheating system are provided for optimumand immediate operation, guaranteeing longer life for the engineand hydraulic components. Servicing of the engine and hydraulics is considerably simplifieddue to total accessibility.
Photo may include optional equipment.
12 / 13Specifications Backhoe attachment
Engine
Watercooled, 4 cycle Diesel,6-Cylinders in line, direct injection,Turbocharged, Charger air cooled,Low emission
Type
Rated flywheel horse powerJ1995 (gross) 353 (263) / 1900
320 (239) / 1900358 (263) / 1900325 (239) / 1900
182.5 (1320) / 1300125 (4.92) x 147(5.79)
10,800 (659)
Max. torqueBore x strokePiston displacementBatteriesStarting motorAlternator
2 x 12V x 200AH24V, 7.2kw24V, 50Amp
HP(kW)/rpm
PS(kW)/rpm
kgf.m(lbf.ft)/rpmmm (in)cc (in3)
J1349 (net)627 1/1 (gross)627 1/1 (net)
SAE
DIN
Buckets
Backhoe attachment
Digging force
Model
Main pump
Hydraulic motors
Relief valve setting
Hydraulic cylinders
TypeMax. flowSub-pump for pilot circuit
Two variable displacement piston pumps2x380 /min (100.4 US gpm / 83.6 UK gpm)Gear pump
Cummins QSM11-C
Swing system
Swing motorSwing reductionSwing bearing lubricationSwing brakeSwing speed
Axial piston motorPlanetary gear reductionGrease-bathedMulti wet disc10.3 rpm
Coolant & Lubricant capacity
Undercarriage
Operating weight (approximate)
(refilling)Fuel tankEngine coolant Engine oilSwing device(each)Final drive(each)Hydraulic system(including tank)Hydraulic tank
liter61050.037.95.05.0380250
US gal161.213.210.01.31.3
100.466.1
UK gal134.211.08.31.11.1
83.655.0
Center frameTrack frameNo. of shoes on each sideNo. of carrier roller on each sideNo. of track roller on each sideNo. of track guard on each side
600 (24)700 (28)750 (30)800 (32)900 (36)
44,900 (99,000)45,400 (100,100)45,700 (100,800)46,000 (101,400)46,500 (102,500)
0.78 (11.09)
600 (24) 43,700 (96,300) 0.76 (10.81)
0.67 (9.53)0.63 (8.96)0.60 (8.53)0.54 (7.68)
Shoes(Triple grouser)
mm(in)
Operating weightkg(lb)
Ground pressurekgf/cm2(psi)
X - leg typePentagonal box type
R450LC-7 R450-7
53292
49272
Drives & Brakes
Drive methodDrive motorReduction systemMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake
Pilot pressure operated joysticks and pedals with detachable lever providealmost effortless and fatigueless operation.
X-leg type center frame is integrally welded with reinforced box-sectiontrack frames. The undercarriage includes lubricated rollers, idlers, trackadjusters with shock absorbing spring and sprocket, assembled trackchain with triple grouser shoes.
Operating weight
Major component weight
Operating weight, including 7,060mm (23’ 2”) boom, 3,380mm (11’ 1”)arm, SAE heaped 2.15m3 (2.81 yd3) backhoe bucket, lubricant, coolant,full fuel tank, hydraulic tank and the standard equipment.
Hydraulic system
Two speed axial piston motorwith brake valve and parking brake
Axial piston motor with automatic brake
330 kgf/cm2 (4690 psi)345 kgf/cm2 (4910 psi)360 kgf/cm2 (5120 psi)285 kgf/cm2 (3770 psi)35 kgf/cm2 (500 psi)Installed
Boom: 2-170 120 1570 mm (6.7” 4.7” 61.8”)Arm: 1-185 125 1820 mm (7.3” 4.9” 71.7”)
Bucket: 1-160 110 1370 mm (6.3” 4.3” 53.9”)
Cross-sensing and fuel saving pump system
Travel
Swing
Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve
No. of cylinder-bore x rod x stroke
Fully hydrostatic typeAxial piston motor, in-shoe designPlanetary reduction gear37,200 kgf (82,000 lbf)5.3 km/hr (3.3 mph) / 3.2 km/hr (2.0 mph)35 (70 %)Multi wet disc
Traveling and steeringEngine throttleExternal Lights
Pilot controlTwo joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)
Two levers with pedalsElectric, Dial typeTwo lights mounted on the boom one under the battery box
Control
Standard equipment
UpperstructureCounterweightBoom (with Arm cylinder)
8,710kg (19,200lb)9,200kg (20,280lb)3,910kg (8,620lb)
SAEheaped
CECEheaped
Without side cutters
With sidecutters
2400(7’ 10”)Arm
Recommendation mm(ft.in)7060 (23’ 2”)Boom 6550 (21’ 6”)
2900(9’ 6”)
3380(11’ 1”)
4000(13’ 1”)
4500(14’ 9”)
2400(7’ 10”)
Capacity m3 (yd3) Width mm (in)Weightkg(lb)
1.38 (1.80)1.84 (2.41)2.15 (2.81)2.56 (3.35)2.79 (3.65)3.03 (3.96)2.20 (2.88)1.80 (2.35)2.20 (2.88)
1.20 (1.57)1.60 (2.09)1.85 (2.40)2.20 (2.90)2.40 (3.14)2.60 (3.40)1.80 (2.35)1.50 (1.96) 1.80 (2.35)
1,100 (43.3)1,420 (55.9)1,610 (63.4)1,870 (73.6)2,020 (79.5)2,170 (85.4)1,810 (71.3)1,480 (58.3)1,810 (71.3)
1,160 (45.7)1,480 (58.3)1,670 (65.7)1,930 (76.0)2,080 (81.9)2,230 (87.8)
---
1360 (3000)1540 (3400)1620 (3570)1830 (4030)1950 (4300)2020 (4450)2040 (4500)1930 (4250)2200 (4850)
: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less
: Standard backhoe bucket / : Heavy-duty / : Rock bucket-Heavy duty
Boom and arms are of all-welded, low-stress, full-box section design. 7060mm(23’ 2”), 6550mm(21’ 6”)boom and 2400mm(7’ 10”), 2900mm(9’ 6”),3380mm(11’ 1”), 4000mm(13’ 1”), 4500mm(14’ 9”)arms are available. Hyundai Buckets are all-welded, high-strength steel implements.
Bucket digging force
Arm crowdforce
Arm Length Weight
mm(ft.in)kg(lb)
2400 (7’ 10”)2070 (4560)
2900 (9’ 6”)2230 (4920)
3380 (11’ 1”)2100 (4630)
4000 (13’ 1”)2370 (5220)
4500 (14’ 9”)2550 (5620)
Remark
223.6 [243.9]22800 [24870] 50270 [54840]
256.0 [279.2]26100 [28470] 57540 [62770]
256.0 [279.2] 26100 [28470] 57540 [62770]
256.0 [279.2]26100 [28470] 57540 [62770]
256.0 [279.2]26100 [28470] 57540 [62770]
256.0 [279.2]26100 [28470] 57540 [62770]
265.8 [289.9]27100 [29560] 59750 [65180]
215.7 [235.4]22000 [24000] 48500 [52910]
180.4 [196.8]18400 [20070] 40570 [44260]
163.8 [178.7]16700 [18220] 36820 [40170]
153.0 [166.9]15600 [17020] 34390 [37520]
278.5 [303.8]28400 [30980] 62610 [68300]
225.6 [246.1]23000 [25090] 50710 [55320]
187.3 [204.3]19100 [20840] 42110 [45940]
169.7 [185.1]17300 [18870] 38140 [41610]
157.9 [172.2]16100 [17560] 35490 [38720]
223.6 [243.9]22800 [24870] 50270 [54840]
223.6 [243.9]22800 [24870] 50270 [54840]
223.6 [243.9]22800 [24870] 50270 [54840]
223.6 [243.9]22800 [24870] 50270 [54840]
[ ]:Power Boost
kNkgflbfkNkgflbfkNkgflbfkNkgflbf
SAE
ISO
SAE
ISO
Note : Arm weight including bucket cylinder and linkage. Standard arm
1.37 (1.80) 1.84 (2.41)2.15 (2.81)
2.56 (3.35) 2.79 (3.65)3.03 (3.96)
2.20 (2.88)1.80 (2.35)2.20 (2.88)
SAE heaped m3(yd3)
NEW 7 SERIES ROBEX 450LC-7
Model
R450LC-7
R450-7
3380mm (11’ 1”) 4000mm (13’ 1”)4500mm (14’ 9”)
2400mm (7’ 10”)2900mm (9’ 6”)
Description
Dimensions & Working ranges
Dimensions
mm (ft in)
Boom length
Arm length
I Overall length
J Overall height of boom
K Track shoe width
L Overall width
7060 (23’ 2”)2400
(7’ 10”)
12230(40’ 1”)
3820(12’ 6”)
600(24”)
3340(10’ 11”)
700(28”)
3440(11’ 3”)
750(30”)
3490(11’ 5”)
800(32”)
3540(11’ 7”)
900(36”)
3640(11’ 11”)
3380(11’ 1”)
12000(39’ 4”)
3600(11’ 10”)
2900(9’ 6”)
12160(39’ 11”)
3750(12’ 4”)
4000(13’ 1”)
11970(39’ 3”)
4040(13’ 3”)
4500(14’ 9”)
2400(7’ 10”)
11910(39’ 1”)
11730(38’ 6”)
4090(14’ 9”)
4020(13’ 2”)
mm (ft in)
ABCDD’EFGH
Tumbler distanceOverall length of crawlerGround clearance of CWTTail swing radiusRear-end lengthOverall width of upperstructureOverall height of cabMin. ground clearanceTrack gauge
1340 (4’ 5”)3720 (12’ 2”)3665 (12’ 0”)2980 (9’ 9”)3250 (10’ 8”)555 (1’ 10”)2740 (9’ 0”)
4040 (13’ 3”)5032 (16’ 6”)
4470 (14’ 8”)5462(17’ 11”)
mm (ft in)
Boom length
Arm length
A Max.digging reach
A’ Max. digging reach on ground
B Max. digging depth
B’
C
D
E
F
Max. digging depth (8' level)
7060(23’ 2”) 6550(21’ 6”)2400
(7’ 10”)
11160(36’ 7”)
10940(35’ 11”)
6810(22’ 4”)
6620(21’ 9”)
2900(9’ 6”)
11550(37’ 11”)
11340(37’ 2”)
7310(23’ 12”)
7140(23’ 5”)
3380(11’ 1”)
12100(39’ 8”)
11900(39’ 1”)
7790(25’ 7”)
7640(25’ 1”)
4000(13’ 1”)
4500(14’ 9”)
2400(7’ 10”)
12660(41’ 6”)
13150(43’ 2”)
10610(34’ 10”)
12470(40’ 11”)
12960(42’ 6”)
10370(34’ 0”)
8410(27’ 7”)
8910(29’ 3”)
6330(20’ 9”)
8280(27’ 2”)
8790(28’ 10”)
6150(20’ 2”)
Max. vertical walldigging depth
5990(19’ 8”)
5850(19’ 2”)
6560(21’ 6”)
7290(23’ 11”)
7690(25’ 3”)
5430(17’ 10”)
Max. digging height
10600(34’ 9”)
10550(34’ 7”)
11030(36’ 2”)
11250(36’ 11”)
11500(37’ 9”)
10210(33’ 6”)
Max. dumping height
7190(23’ 7”)
7240(23’ 9”)
7660(25’ 2”)
7880(25’ 10”)
8120(26’ 8”)
6810(22’ 4”)
Min. swing radius 5090(16’ 8”)
4900(16’ 1”)
4780(15’ 8”)
4830(15’ 10”)
4870(15’ 12”)
4640(15’ 3”)
Working ranges
Standard Equipment
Standard Equipment
6550 (21’ 6”)
NEW 7 SERIES ROBEX 450LC-7
Lifting capacities
Boom: 6.55 m (21’ 6”) Arm: 2.40 m (7’ 10”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 600mm(24”) triple grouser with 9,200kg(20,280 lb) CWT
Rating over-front Rating over-side or 360 degree
Load radius
*25360*55910*22500*49600
*25360*55910*22500*49600
*18830*41510
*23370*51520*21560*47530*18450*40680*13260*29230
*18830*41510
160203532016060354101632035980
*13260*29230
*12780*28180*14310*31550*15980*35230*17360*38270*17360*38270*16520*36420*14370*31680
1274028090120602659011290248901067023520103202275010220225301035022820
*11340*25000*11990*26430*12790*28200*13390*295201326029230
*12770*28150
8630190308340
183907970
175707630
168207400
163107330
16160
*9810*21630
9350206108850
195108810
194209240
20370*9630
*21230*8790
*19380
6110134705390
118805040
111104980
109805210
114905840
128707250
15980
9.15(30.3)9.65
(31.7)9.86
(32.3)9.80
(32.2)9.47
(31.1)8.83
(29.0)7.80
(25.6)
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) CapacityAt max. reach
Reach
m (ft)
Boom: 7.06 m (23’ 2”) Arm: 2.40 m (7’ 10”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 600mm(24”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*21370*47110
*21370*47110
*20830*45920*18310*40370*14290*31500
15630344601591035080
*14290*31500
*12300*27120*13990*30840*15700*34610*16810*37060*16990*37460*16280*35890*14570*32120*11310*24930
*12300*271201169025770108602394010250226009940
219109880
2178010010220701038022880
*10680*23550*11480*25310*12360*27250*13030*287301298028620
*12760*28130*11280*24870
8520187808150
179707730
170407370
162507140
157407070
155907170
15810
10100222709890
21800
5710125905520
12170
*8940*19710
8360184307960
175507920
174608260
18210*8940
*19710*8410
*18540*6750
*14880
5330117504740
1045044509810439096804580
101005080
112006140
13540 *6750
*14880
9.75(32.0)10.21(33.5)10.41(34.2)10.36(34.0)10.05(33.0)9.46
(31.0)8.51
(27.9)7.04
(23.1)
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) Capacity Reach
m (ft)
At max. reach
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
Lifting Capacities
Boom: 7.06 m (23’ 2”) Arm: 2.90 m (9’ 6”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 600mm(24”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*19180*42280*24800*54670*19830*43720
*19180*42280*24800*54670*19830*43720
*17510*38600*21350*47070*22470*49540*23020*50750*21760*47970*19550*43100*16030*35340
*17510*3860016840371301569034590153603386015380339101559034370
*16030*35340
*13150*28990*15000*33070*16360*36070*16880*37210*16500*36380*15180*33470*12570*27710
1189026210110002425010300227109890
21800 9740
214709810
216301008022220
*10030*22110*10900*24030*11880*26190*12690*2798012930285101278028180
*11820*26060
8630190308230
181407770
171307360
162307080
156106950
153206980
15390
*9570*21100*10050*22160
9860217409680
21340
5950131205710
125905490
121005320
11730
*8310*18320
7830172607460
164507410
163407680
169308400
18520*8390
*18500*7400
*16310
493010870440097004120908040608950420092604620
101905480
12080 7350
16200
10.17(33.4)10.62(34.8)10.80(35.4)10.75(35.3)10.46(34.3)9.89
(32.4)9.00
(29.5)7.65
(25.1)
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) Capacity Reach
m (ft)
At max. reach
R450LC-7Description R450-7
Lifting capacitiesRating over-front Rating over-side or 360 degree
Boom: 7.06 m (23’ 2”) Arm: 4.00 m (13’ 1”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 800mm(32”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*12610*27800*16540*36460*21150*46630*26010*57340*19460*42900
*12610*27800*16540*36460*21150*46630*26010*57340*19460*42900
*18460*40700*21710*47860*23080*50880*22900*50490*21550*47510*19010*41910*14810*32650
184504068016800370401593035120156203444015630344601588035010
*14810*32650
*13420*29590*15260*33640*16410*36180*16700*36820*16100*35490*14470*31900*11280*24870
1171025820108502392010250226009930
218909840
216909950
219401029022690
*9660*21300*10820*23850*11900*26230*12650*27890*12900*28440*12490*27540*11140*24560
8670191108160
179907670
169107280
160507050
155406960
153407040
15520
*7910*17440*8610
*18980*9260
*20410*9870
*217609900
218309730
214509700
21380
6490143106250
137805960
131405670
125005430
119705280
116405250
11570
*4780*10540*6430
*14180*7270
*16030*6780
*14950
459010120444097904290946041609170
*7140*15740
6760149006470
142606420
141506600
145507070
15590*7560
*16670*7220
*15920*6010
*13250
410090403710818035007720344075803530778038008380434095705380
11860*6010
*13250
11.35(37.2)11.75(38.5)11.91(39.1)11.87(38.9)11.61(38.1)11.11(36.5)10.34(33.9)9.21
(30.2)7.55
(24.8)
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) 10.5m (35.0ft) Capacity Reach
m (ft)
At max. reach
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
NEW 7 SERIES ROBEX 450LC-7
LIFTING CAPACITIES 17
Boom: 6.55 m (21’ 6”) Arm: 2.40 m (7’ 10”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 800mm(32”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*25360*55910*22500*49600
*25360*55910*22500*49600
*18830*41510
*23370*51520*21560*47530*18450*40680*13260*29230
*18830*41510
164003616016440362401671036840
*13260*29230
*12780*28180*14310*31550*15980*35230*17140*37790*17360*38270*16520*36420*14370*31680
*12780*28180123202716011550254601093024100105802332010480231001060023370
*11340*25000*11990*26430*12790*28200*13390*29520*13490*29740*12770*28150
8820194408540
188308160
179907820
172407590
167307520
16580
*9810*21630
9590211409090
200409050
199509490
20920*9630
*21230*8790
*19380
6260138005530
121905180
114205120
112905350
117906000
132307430
16380
9.15(30.0)9.65
(31.7)9.86
(32.3)9.80
(32.2)9.47
(31.1)8.83
(29.0)7.80
(25.6)
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) CapacityAt max. reach
Reach
m (ft)
Boom: 7.06 m (23’ 2”) Arm: 3.38 m (11’ 1”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 800mm(32”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*11840*26100*17340*38230*23020*50750*23040*50790
*11840*26100*17340*38230*23020*50750*23040*50790
*20340*44840*22940*50570*23480*51760*22660*49960*20790*45830*17680*38980
179603959016610366201605035380159303512016050353801638036110
*12500*27560*14490*31940*16110*35520*16930*37320*16850*37150*15850*34940*13690*30180
1245027450115702551010820238501035022820101302233010120223101031022730
*9550*21050*10490*23130*11570*25510*12510*27580*13080*28840*13090*28860*12340*27210*10390*22910
9020198908610
189808140
179507710
170007400
163107220
159207200
158707370
16250
*7560*16670*9270
*20440*9840
*21690102302255010020220909910
21850
6450142206250
137806000
132305750
126805560
122605460
12040
*7870*17350
7430163807120
157007070
155907310
161207890
17390*8000
*17640*7330
*16160
46201019041709190394086903890858040108840435095905040
11110 6440
14200
10.76(35.3)11.18(36.7)11.35(37.2)11.30(37.1)11.03(36.2)10.50(34.4)9.67
(31.7)8.44
(27.7)
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) Capacity Reach
m (ft)
At max. reach
*12600*27780
*12600*27780
*9460*20860
*9460*20860
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft-6.0m-20.0ft
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft-6.0m-20.0ft
Lifting Capacities
Lifting capacitiesRating over-front Rating over-side or 360 degree
Boom: 7.06 m (23’ 2”) Arm: 3.38 m (11’ 1”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 600mm(24”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*11840*26100*17340*38230*23020*50750*23040*50790
*11840*26100*17340*38230*23020*50750*23040*50790
*20340*44840*22940*50570*23480*51760*22660*49960*20790*45830*17680*38980*12600*27780
175803876016230357801567034550155503428015670345501600035270
*12600*27780
*12500*27560*14490*31940*16110*35520*16930*37320*16850*37150*15850*34940*13690*30180*9460
*20860
12190268701131024930105702330010090222409870
217609870
217601005022160*9460
*20860
*9550*21050*10490*23130*11570*25510*12510*2758013060287901286028350
*12340*27210*10390*22910
8820194408420
185607950
175307520
165807200
158707030
155007010
154507170
15810
*7560*16670*9270
*20440*9840
*216909970
219809760
215209640
21250
6290138706090
134305840
128705590
123205400
119005300
11680
*7870*17350
7230159406920
152606880
151707100
156507680
16930*8000
*17640*7330
*16160
4500992040608950382084203770831038908580422093004900
10800 6270
13820
10.76(35.3)11.18(36.7)11.35(37.2)11.3
(37.1)11.03(36.2)10.50(34.4)9.67
(31.7)8.44
(27.7)
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft-6.0m-20.0ft
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) Capacity Reach
m (ft)
At max. reach
Boom: 7.06 m (23’ 2”) Arm: 4.00 m (13’ 1”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 600mm(24”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*12610*27800*16540*36460*21150*46630*26010*57340*19460*42900
*12610*27800*16540*36460*21150*46630*26010*57340*19460*42900
*18460*40700*21710*47860*23080*50880*22900*50490*21550*47510*19010*41910*14810*32650
180703984016420362001555034280152403360015250336201546034150
*14810*32650
*13420*29590*15260*33640*16410*36180*16700*36820*16100*35490*14470*31900*11280*24870
114502524010590233509990
220209670
213209580
211209690
213601003022110
*9660*21300*10820*23850*11900*26230*12650*278901269027980
*12490*27540*11140*24560
8480187007970
175707480
164907090
156306850
151006770
149306850
15100
*7910*17440*8610
*18980*9260
*20410*9870
*217609640
212509470
208809430
20790
6330139606100
134505800
127905510
121505280
116405130
113105090
11220
*4780*10540*6430
*14180*7270
*16030*6780
*14950
44609830431095004160917040308880
7120157006570
144806290
138706240
137606410
141306870
15150*7560
*16670*7220
*15920*6010
*13250
399088003600794033907470333073403410752036808110421092805230
11530*6010
*13250
11.35(37.2)11.75(38.5)11.91(39.1)11.87(38.9)11.61(38.1)11.11(36.5)10.34(33.9)9.21
(30.2)7.55
(24.8)
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) 10.5m (35.0ft) Capacity Reach
m (ft)
At max. reach
Boom: 7.06 m (23’ 2”) Arm: 4.50 m (14’ 9”) Bucket: 2.15 m3 (2.81yd3) SAE heaped Shoe : 600mm(24”) triple grouser with 9,200kg(20,280 lb) CWT
Load radius
*12850*28330*15890*35030*19840*43740*24800*54670*22210*48960
*12850*28330*15890*35030*19840*43740*24800*54670*22210*48960
*16930*37320*20590*45390*22550*49710*22900*50490*21990*48480*19900*43870*16320*35980
*16930*37320167003682015580343501509033270149903305015160334201558034350
*12540*27650*14540*32060*15940*35140*16510*36400*16220*35760*14960*32980*12380*27290
116302564010700235909990
220209580
211209420
207709460
208609730
21450
*9010*19860*10220*22530*11390*25110*12280*2707012610278001245027450
*11550*25460*9180
*20240
8580189208030
177007500
165307060
155606770
149306630
146206660
146806900
15210
*7540*16620*8100
*17860*8800
*19400*9490
*209209600
211609380
206809300
20500*8810
*19420
6400141106140
135405820
128305500
121305220
115105030
110904950
109105020
11070
*4390*9680*6150
*13560*7480
*164907600
163607420
163607320
16140
*4390*96804480988043109500412090803960873038608510
6550144006070
133805820
128305760
127005910
130306280
138507010
154506960
153406210
13690
361079603270721030706770301066403070677032907250373082204540
10010*6210
*13690
11.86(38.9)12.24(40.2)12.40(40.7)12.35(40.5)12.10(39.7)11.63(38.2)10.90(35.8)9.85
(32.3)8.34
(27.4)
Load Pointheight m(ft)
3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) 7.5m (25.0ft) 9.0m (30.0ft) 10.5m (35.0ft) Capacity Reach
m (ft)
At max. reach
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft-6.0m-20.0ft
6.0m20.0ft4.5m15.0ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
3.0m10.0ft1.5m5.0ft
GrondLine
-1.5m-5.0ft-3.0m-10.0ft-4.5m-15.0ft-6.0m-20.0ft
LIFTING CAPACITIES 14 / 15 / 16