standard base lever temp/flow water energy nf ecau … endura.pdf · 2016-06-16 · c2 c3 energy...
TRANSCRIPT
THE RANGE The new ENDURA cartridge range has been designed as a modular system, completely compatible throughout all options*. This feature allows the manufacturer create its own version by simply adding preset standards to the basic cartridge. More than 100 potential combinations makes the ENDURA virtually suitable for any application.*Except for SISO, BISO and SIO bases.
Nut torque/Pitch M1,5 10 – 12 Nm 10 – 12 Nm
Opening angle 25º 25º
Rotation angle 90º 90º
Working pressure (recommended) 1 – 5 bar 1 – 5 bar
Burst pressure >50 bar >50 bar
Life cycle (x2) EN 817 140,000 cycles 140,000 cycles
(x2) ASME 112.18.1 M 1,000,000 cycles 1,000,000 cycles
Sensitivity (r= 46/60 mm.) > 12 mm. > 12 mm.
Fidelity < 2 ºC < 2 ºC
Constant 63ºC & 50°C < 4°C – < 6ºC < 4°C – < 6ºC
(6 l/min-3 l/min)
Max. Hot water 90 ºC 90 ºC
Flow rate at 3 bar Free flow 27,85 – 29,4 l/min 26,6 – 28 l/min
C-Restrictor 20,6 – 21,25 l/min 20,15 – 20,75 l/min
Noise level (C-Restrictor) 22 dB(A) ± 2 (1) 22 dB(A) ± 2 (1)
Operation torqueOpen – close 0,15 ÷ 0,35 Nm 0,15 ÷ 0,35 Nm
Turn left-right 0,25 ÷ 0,35 Nm 0,25 ÷ 0,35 Nm
TECHNICAL SPECIFICATIONS CD (HIGH BASE) SD (LOW BASE)
ENDURA + + + + + +
STANDARD CARTRIDGE
NF ECAUCOMPLIANT
C1
C2
C3
ENERGYSAVING
—
COLD
WATERSAVING
—
DUE
TEMP/FLOWLIMITER
—
TEMP
TEMP+FLOW
LEVERMOTION
—
SN(CLUTCH)
BASE
SISO
CD(HIGH BASE)
SD(LOWBASE)
BISO
SIO
Tested with proprietary fixtures at SEDAL lab. (1) Considering restrictor & faucet body type
(C)
COPY
RIG
HT
SED
AL G
ROU
P 20
15.
ALL
RIG
HTS
RES
ERVE
D.
SED
AL G
ROU
P RE
SERV
ES T
HE
RIG
HT
OF
MO
DIF
YIN
G A
NY
SPEC
IFIC
ATIO
NS,
PIC
TURE
S O
R IN
FORM
ATIO
N O
N T
HIS
BRO
CHU
RE W
ITH
OU
T N
OTI
CE
DIPTICO ENDURA V02.indd 2-3 4/3/15 15:42
New from scratch.When we decided we needed to develop a new 35mm cartridge, we came to the conclusion that it had to be new, completely. And so we did. Our team of engineers and project managers got rid of any previ-ous assumptions and came out with a new set of components after an intensive brainstorming. The result is the newly built ENDURA 35 valve. High precision components, along with excellent performing materials make the new ENDURA suitable for virtually any application.
A bunch of technology.Although it looks like a simple plastic device, there is a huge engi-neering effort in every single detail of the ENDURA 35. A complete set of high tech solutions are packed into the ENDURA design, such Glide Feel Technology for a perfect-ly smooth operation, Ceramic Nano Shelter Technology to provide extra durability, Noise Cancelling Technol-ogy to lower the noise level and Ac-cuDue Technology to deliver high pre-cision water saving value.
SedalOX™ 96 RTP, keystone.The new ENDURA features a high performance ceramic set by Sedal Ceramics, our Technical Ceramics Company, where we developed our SedalOX™ 96 ceramic grade from scratch. This 96% Aluminum Oxide Ready To Press (RTP) powder has been formulated to perform
above the grades from our competi-tors thanks to Sedal’s exclusive Nano Shelter Technology™. NS Technology creates nanometer sized deposits for the grease on the disc surface for an extended life cycling. The result is more than double ASME and EN stan-dard cycles in life tests.
Great range, greater possibilities.The new ENDURA 35 valve range provides the manufacturer with 18 different options to develop his products. Water and energy saving technologies, safety temperature regulation, maximum water flow limiter, as well as standard selections are available and fully compat-ible. C1, C2 and C3 NF ECAU regulation versions are also available.
New SISO, SIO, and BISO options.In an world increasingly concerned about environmental and health is-sues, the sanitary business is facing great challenges. To face lead-free regulation and other upcoming norms that will make more difficult to use certain materials in contact with water, SEDAL offers 3 new interfac-es that help in avoiding this issue: SISO (side in-side out), SIO (side in and out) and BISO (bottom in-side out) base con-figurations with threaded inserts. With this solution, that extends the classic distributor and flat bases set, the ENDU-RA cartridge allows the manufacturer to completely avoid contact between fau-cet and water by plugging the inlet and outlet hoses directly into the cartridge. Lead, what lead?
Engineered in Europe, powered in ChinaJust like our customers do, we think Global. Our engineers and team leaders based in Barcelona, Spain, have been working hard to devel-op this new ENDURA cartridge range with the highest requirements from our customers. European mindset, Asian power, the winning
combination for a Global strategy and for Global customers.
The new ENDURA 35 cartridge sets a new standard in endurance: 2x standard life cycling tests. A complete set of technologies that have been built into this new piece of engineering to go far beyond competition. Featuring a set of SedalOX® ceramics reinforced with our exclusive Nano Shelter Technology in its heart, the ENDURA cartridge range will give the manufacturers all the features that the market is demanding… and more.
DIPTICO ENDURA V02.indd 4-5 4/3/15 15:42