stainless steel sinks - kitchen - acritec industriesstainless steel sinks - kitchen october, 2013...
TRANSCRIPT
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
121001 (PC-U020D) Undermount221015 Undermount
21040 (PC-U080) Undermount21030 (PC-U050) Undermount21021 (PC-U040) Undermount
543
621050 (PC-U090) Undermount721070 (PC-U110) Undermount
21090 (PC-U140) Undermount21081 (PC-U120D) Undermount
109821080 (PC-U120) Undermount
1121101 (PC-U180D) Undermount1221120 (PC-U200) Undermount
21150 (PC-U230) Undermount21140 (PC-U220) Undermount21130 (PC-U210) Undermount
151413
1621155 Undermount1721160 (PC-U240) Undermount
21175 (PC-U250D) Undermount21170 (PC-U250) Undermount
20191821165 Undermount
2121180 (PC-U260) Undermount2221190 (PC-U270) Undermount
21230 (PC-U207) Undermount21220 (PC-U891) Undermount21200 (PC-U320) Undermount
252423
2621251 Undermount2721270 Undermount
25025 (PC-D040) Drop In - Drain Board RH
23020 (PC-K031) Integral Apron
31
292823010 (PC-K021) Integral Apron
3225040 (PC-D061) Drop In
3325060 (PC-D311) Drop In
25100 (PC-D343) Drop In25130 (PC-D/U50) Drop In/ Undermount25140 (PC-D/U255) Drop In/ Undermount
25090 (PC-D341) Drop In 25080 (PC-D331) Drop In
363738
25020 (PC-D040) Drop In - Drain Board LH 30
3534
Section 25Table of Contents
Stainless Steel Sinks - KitchenOctober, 2013
Stainless Steel Sinks - Kitchen
Section 25Page 2
Stainless Steel Sinks-KitchenOctober 2013
7”
14½”
11”13”
12½”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21001PC-U020DUnder-Mount Kitchen Sink
14½" × 13" × 7"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Maximum cabinet size required: 19”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 4 lbs, 1.8 kg
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosnig a sink to fit your cainet
Diagram not to scale
Section 25Page 3
Stainless Steel Sinks-KitchenOctober, 2013
10½”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21015PC-U030Under-Mount Kitchen Sink
19” x 20” x 10½”CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 24”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 18 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
Small radius R20 mm
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
18”
17”
20”
19”
Section 25Page 4
Stainless Steel Sinks-KitchenOctober, 2013
21”
8”
23”
16”18”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21021PC-U040Under-Mount Kitchen Sink
23" × 18" × 8"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 27”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 9 lbs, 4 kg
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 5
Stainless Steel Sinks-KitchenOctober, 2013
10”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21030PC-U050Under-Mount Kitchen Sink
30" × 18" × 10"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 33”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 20 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
16”
28”
30”
18”
Section 25Page 6
Stainless Steel Sinks-KitchenOctober, 2013
9”7”
10 ⅜”
20 ⅝”18 ½”
15 3/4”16”
17 ¾”31 ½”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21040PC-U080Under-Mount Kitchen Sink
31 ½" × 20 ⅝" × 9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 13 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 7
Stainless Steel Sinks-KitchenOctober, 2013
8 ½”
29 ½”13 ⅜” 13 ⅜”
17 ½”15 ¾”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21050PC-U090Under-Mount Kitchen Sink
29½" × 17½" × 8½"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 34”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 20 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 8
Stainless Steel Sinks-KitchenOctober, 2013
33 ½”12 ½”17 ¾”
13”15 ⅛”15 ¾”
18 ”
7”9”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21070PC-U110Under-Mount Kitchen Sink
33½" × 18" x 9"
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 38”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 18 lbs
2 Metal 3 1/2” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 1/2” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 9
Stainless Steel Sinks-KitchenOctober, 2013
8 ½”
19 ¾”
19 ¾”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21080(PC-U120)19¾" x 19¾" x 8½"
Under-Mount Kitchen Sink
19" × 20" × 10"
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 24”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 12 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 10
Stainless Steel Sinks-KitchenOctober, 2013
10”
18”
17”
20”
19”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21081(PC-U120D)19" x 20" x 10"
Under-Mount Kitchen Sink
19" × 20" × 10"
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 24”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 13 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 11
Stainless Steel Sinks-KitchenOctober, 2013
10”
18”
30”
16”
28”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21090PC-U140Under-Mount Kitchen Sink
30" × 18" × 10"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 34”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 18 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 12
Stainless Steel Sinks-KitchenOctober, 2013
21 ¼”
23 ¾”
18 ⅞” 21”
9”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21101PC-U180DUnder-Mount Kitchen Sink
23 ¾" × 21" × 9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 28”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 9 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 13
Stainless Steel Sinks-KitchenOctober, 2013
9½” 7 ½”
17 ¾”
12 ½”
14 ⅞” 17”
32”
20”
16”
1 ½
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21120PC-U200Under-Mount Kitchen Sink
32" × 20" × 9½"
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 19 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 14
Stainless Steel Sinks-KitchenOctober, 2013
8”
34 ¼”15 ¾” 15 ¾”
19 ¼”17 ¾”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 38”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 24 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations
3 ½” drain openings
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet.
21130PC-U210Under-Mount Kitchen Sink
34 ¼"× 19¼"× 8"
Diagram not to scale
Section 25Page 15
Stainless Steel Sinks-KitchenOctober, 2013
8”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 34”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 20 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
21140PC-U220Under-Mount Kitchen Sink
29½" × 19 ¼" × 8"
Diagram not to scale
29 ½”11” 15 ¾”
19 ¼”17 ⅝”
10 ½”
31 ¼”
1 ¼”14” 13 ½”
18”20 ½” 16”
18 ½”
Acri-tec Industries Corp. 32829 London Ave, Mission, B.C. V2V 6M7 | Tel : 1.877.464.3100 Fax : 604.826.3149
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 25 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
21150PC-U230Under-Mount Kitchen Sink
31 ¼" × 20½" × 10½"
Diagram not to scale
Section 25Page 16
Stainless Steel Sinks - KitchenOctober, 2013
Section 25Page 17
Stainless Steel Sinks-KitchenOctober, 2013
9 ½”
32”13 ¾” 13 ¾”
18”15”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21155Under-Mount Kitchen Sink
32" × 18" × 9½" CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 20 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
8”
Acri-tec Industries Corp. 32829 London Ave, Mission, B.C. V2V 6M7 | Tel : 1.877.464.3100 Fax : 604.826.3149
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Maximum cabinet size required: 22”
Fabricated from type 304, 18 gauge stainlesssteel
Net Sink Weight = 10 lbs
Constructed from 18/9 stainless steel fordurability and superior longevity.
Metal 3 ½” stainless steel strainer
Template
Brushed Satin Finish
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
15 ¾”
15 ¾”
17 ¼"
17 ¼"
Section 25Page 18
Stainless Steel Sinks-KitchenOctober, 2013
21160PC-U240Under-Mount Kitchen Sink
17¼" x 17¼" x 8"
Section 25Page 19
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21165Under-Mount Kitchen Sink
23” x 18” x 8 ¾”CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 27”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 9 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
Small radius R20 mm
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
16”
21”
18”
23”
8 ¾”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21170PC-U250Under-Mount Kitchen Sink
31½" × 20½" × 9" CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 28 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
9” 8"
31 ½”14 ⅛” 14 ⅛”
18 ⅜"20 ½" 15 ⅝”18 ”
Section 25Page 20
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21175PC-U250DUnder-Mount Kitchen Sink
31¼" × 20½" × 10¼" CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 28 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
31 ¼”14” 13½”
18"20½" 16” 18 ”
10 ¼” 8"
Section 25Page 21
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 25Page 22
Stainless Steel Sinks-KitchenOctober 2013
9”
23 ¼”
21”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21180PC-U260Under-Mount Kitchen Sink
23 ¼" × 21" ×9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 27”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 14 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 23
Stainless Steel Sinks-KitchenOctober, 2013
9"
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21190PC-U270Under-Mount Kitchen Sink
18" × 20" × 9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Maximum cabinet size required: 22”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 10 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 24
Stainless Steel Sinks-KitchenOctober, 2013
9"
14"
1 ⅛"
31"
15 ½" 18"
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 35”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 12 lbs
2 Metal 3 ½" stainless steel strainers
Template
Brush Satin finish.
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps damper soundand vibrations.
3 ½" drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet.
21200PC-U320Under-Mount Kitchen Sink
31" × 18" × 9"
Diagram not to scale
Section 25Page 25
Stainless Steel Sinks-KitchenOctober, 2013
6 ½”7 ⅝”
16”13 ⅜”
15 ¾” 10 ¼”
29 ¾”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21220PC-U891Under-Mount Kitchen Sink
29 ¾" × 16" × 7 ⅝"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Maximum cabinet size required: 34”
Fabricated from type 304, 19 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 8 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Partition guards against spillovers.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Diagram not to scale
Section 25Page 26
Stainless Steel Sinks-KitchenOctober, 2013
9”
20 ¾”
15 ¾”17 ¾”
18 ¾”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21230PC-U207Under-Mount Kitchen Sink
20 ¾" × 17 ¾" × 9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 24"
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 8 lbs
Metal 3 ½" stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound.
3 ½" drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosnig a sink to fit your cainet
Diagram not to scale
Section 25Page 27
Stainless Steel Sinks-KitchenOctober, 2013
10 ¼”
32”14½” 14½”
19”17”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21251 (PC-U100D)Under-Mount Kitchen Sink
32" × 19" × 10 ¼" CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 29 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 28
Stainless Steel Sinks-KitchenOctober, 2013
7 ¾”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
21270Under-Mount Kitchen Sink
19¼” x 17¼” x 7¾” CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 24”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 10 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain opening.
Small radius R20 mm
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
15 ¾”
17 ¾”
17 ¼”
19 ¼”
Section 25Page 29
Stainless Steel Sinks-KitchenOctober, 2013
9”
31 ½”
15 ½”
14” 14”
18”
1 ¼”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
23010PC-K021Skirted Kitchen Sink
31 ½" × 18" × 9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 35”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless stee fordurability and superior longevity
Net Sink Weight = 25 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 30
Stainless Steel Sinks-KitchenOctober, 2013
17 ½”
12 ½”
14 ¾” 17”
31 ¾”
19 ⅞”
15 ⅞”
9 ¼” 8” 9”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
23020PC-K031Skirted Kitchen Sink
31 ¾" × 19 ¾" × 9"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 16 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 25 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Sink can be installed with reveal, countertop hangover, or flush mounted with countertop.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Allow sufficent space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 31
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25020PC-D040Drop-In Kitchen SinkLeft Hand Drain Board
42 ½" × 19 ½" × 7 ½"
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 46”
Fabricated from type 304, 20 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 13 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Partition guards against spillovers.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Diagram not to scale
10 ¾"15 ½"
19 ½"
14"9 ¼"42 ½"
7 ½"6 ¼"
Section 25Page 32
Stainless Steel Sinks-KitchenOctober, 2013
6 1/4”
10 3/4”
14”
7 ½”
19 ½”15 1/2”
9 1/4”42 1/2”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25025PC-D040Drop-In Kitchen SinkRight Hand Drain Board
42 ½" × 19 ½" × 7 ½"
CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 46”
Fabricated from type 304, 20 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 13 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Partition guards against spillovers.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Diagram not to scale
Section 25Page 33
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25040PC-D061Drop-In Kitchen Sink
27 ¼" × 17 ¾" × 8”CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES
Minimum cabinet size required: 31”
Fabricated from type 304, 19 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 10 lbs
Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
8”7 ¾”
15”
6 ⅝”17”
17 ¾”
27 ¼”
SINK DIMENSIONSDiagram not to scale
Section 25Page 34
Stainless Steel Sinks-KitchenOctober, 2013
20 ½”
7 ¼”5”
15 ¾”12”
13 ⅜”
38”
7”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25060PC-D311Drop-In Kitchen Sink
38" × 20 ½" × 7¼"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURESSINK DIMENSIONS
Minimum cabinet size required: 42”
Fabricated from type 304, 19 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 8 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Partition guards against spillovers.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
Section 25Page 35
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25080PC-D331Drop-In Kitchen Sink
34½" × 20" × 8½"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 38”
Fabricated from type 304, 19 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 11 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Partition guards against spillovers.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Diagram not to scale
8 ½”
34 ½”
20”
Section 25Page 36
Stainless Steel Sinks-KitchenOctober, 2013
7”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25090PC-D341Drop-In Kitchen Sink
31 ½" × 20 ½" × 7"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 35”
Fabricated from type 304, 19 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 18 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Partition guards against spillovers.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
Diagram not to scale
16”
9 ½”
8 ¼”
31 ½”
14”
1 ⅛”
20 ½”
Section 25Page 37
Stainless Steel Sinks-KitchenOctober, 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25100PC-D343Drop-In Kitchen Sink
31¼" × 20½" × 7¾"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES
Minimum cabinet size required: 35”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel for durability and superior longevity
Net Sink Weight = 13 lbs
2 Metal 3 ½” stainless steel strainers
Template
Brushed Satin finish
Raised rim profile provides definition and guards against counter spills.
Recessed spillway guards against accidentaloverflows.
Installation clamps provided for quick & easyinstallation.
Latex based undercoating helps dampersound and vibrations.
3 ½” drain openings.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
7 ¾”
SINK DIMENSIONSDiagram not to scale
15 ¾”
9 ½”
8 1/4”
31 ¼”
14”
1 1/8”
20 ½”
Section 25Page 38
Stainless Steel Sinks-KitchenOctober 2013
10”
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25130(PC-D/U50)Drop-In/Undermount Kitchen Sink
31" × 20" × 10"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES SINK DIMENSIONS
Minimum cabinet size required: 35”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 20 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed as countertop drop-in orflush undermount.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
18”
29”
20”
31”
Section 25Page 39
Stainless Steel Sinks-KitchenOctober 2013
Acri-tec Industries Corp. 27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
This sink complies with CSA Standards
25140(PC-D/U255)Drop-In/Undermount Kitchen Sink
31" × 20" × 10"CABINET SIZE
MATERIAL
INCLUDING
DESIGN FEATURES
SINK DIMENSIONS
Minimum cabinet size required: 36”
Fabricated from type 304, 18 gauge stainlesssteel
Constructed from 18/9 stainless steel fordurability and superior longevity
Net Sink Weight = 20 lbs
Metal 3 ½” stainless steel strainer
Template
Brushed Satin finish
Sink can be installed as countertop drop-in orflush undermount.
Installation clamps provided for quick & easyinstallation.
Large polymer sound deadening pads minimize sound and vibrations.
3 ½” drain opening.
All measurements + 1/4”
*1 year limited manufacturer’s warranty included
*Allow sufficient space for faucet when choosing a sink to fit your cabinet
Diagram not to scale
20”
31”
10”