stainless steel sanitary ware combivents stainless ... · [email protected] midtherm...
TRANSCRIPT
Midtherm StainlessShaw Road, DudleyWest Midlands DY2 8TS
Tel: 01384 238 786 Fax: 01384 455 261
Stainless Catering
Food Processing Equipment
Fume Extraction
Stainless Steel Sanitary Ware
Bespoke Fabrications
Windvents
Combivents
Aluminium Fabrications
General Framework
Important Information
Policy Statement
Our Supply only Products
Midtherm Stainless was founded in 1984 to offer a comprehensive range of bespoke and standard stainless steel and aluminium fabrications. We can manufacture items to customers’ exact specification and requirements. All fabrications are manufactured at our own in house facilities.
As a stainless steel fabricator our products can be found in a large range of applications.
Commercial kitchens • Sinks• Tables• Hot Cupboards• Worktops• Trolleys • Cupboards • Baine Maries• Shelves/ Storage Racks • Dishwasher Canopies
Hospitals & Healthcare • Sinks• Slop Hoppers• Scrub Up Troughs
Bars and Restaurants • Back Bars• Under Bar Sinks • Ice Chest • Speed Rails • Shelves /Storage Racks
Washroom and Sanitary Ware • Shower Trays • Urinals • Wash Troughs
Laboratories• Sinks • Tables• Cupboards• Slop Hoppers
Kitchen Canopy and Extraction Systems
Midtherm’s engineers liaise with consulting engineers, architects and mechanical contractors to ensure that an efficient, high performance system is provided, which meets customer requirements and offers a long service life. The Company can provide a total package from initial design through to project completion. Midtherm’s engineers have extensive knowledge and experience designing kitchen canopies and the associated tasks of: -
• Fan selection and attenuation • Ductwork design inc. Fire rating option• Fire suppression • Pollution control• Lighting selection• Inlet/Extract positioning to avoid recirculation• Bespoke units
Heating Industry
We also manufacture combivents and windvents for the heating industry.
Our Supply and Install Products
www.midthermstainless.co.uk
Bespoke Fabrications
We are able to manufacture bespoke commercial kitchen equipment to meet your requirements.
With over 30 years of commercial catering design experience we manufacture bespoke catering equipment to suit commercial kitchens in all different shapes and sizes. We have a highly skilled dedicated team off staff who use their skills and enthusiasm to work closely with customers to ensure you get the best design to suit your requirements.
Using specialist software, we can assist you in achieving accurate drawings, to achieve the product specification that best suits your project. From here the final sketch goes through to our highly skilled team and is produced with modern technologies.
Hot Cupboards
www.midthermstainless.co.uk
Manufactured from 1.2mm thick grade 304, satin polished, stainless steel with sliding doors, fully insulated, adjustable feet, internal shelf and thermostatically-controlled, electric heating.
A thermostatically controlled, electrically heated dry or wet heat Baine Marie well can also be installed. The gastronorm containers and gantries are not supplied standard, as shown, but available as optional extra.
Hot Cupboard with wet heat Baine Marie
Optional Extras
• 600mm to 2400mm long 700mm wide
• 900mm to 2400mm long 700mm wide x 850mm high
• 900mm to 2400mm long 700mm wide
Plain Hot Cupboard
Hot Cupboard with dry heat Baine Marie
Hot Cupboards
OTHER SIZES AVAILABLE
• 600mm to 2400mm long Single or twin gantry with or without illumination,
• 600mm to 2400mm long, solid or triple rail tray slide
heat lamps and glass sneeze screen
• Set of four 100mm castors (two with brake),
• EN631 stainless steel gastronorm containers
corner buffers and push rail
Catering Sinks Manufactured from 1.2mm thick, grade 304, satin polished, stainless steel with 610mm x 455mm x 300mm deep bowls, 11/2” BSP standpipe strainer wastes, grade 430 stainless steel, 30mm square tubular stand, under-shelf and adjustable feet. Alternative bowls and sizes available on request.
Single Bowl, No Drainer• 750mm x 650mm x 850mm high
Double Bowl, No Drainer
Single Bowl, Single Drainer
• 1500mm x 650mm x 850mm high
Single Bowl, Double Drainer
Double Bowl, Single Drainer
• 1800mm x 650mm x 850mm high
• 1800mm x 650mm x 850mm high• 2400mm x 650mm x 850mm high
Double Bowl, Double Drainer• 2400mm x 650mm x 850mm high• 3000mm x 650mm x 850mm high
TablesManufactured from 1.2mm thick grade 304, satin polished, stainless steel with a 430 stainless steel, 30mm square tubular stand, under shelf and adjustable feet.
Wall Table Centre Table
• 600mm x 2400mm long 650mm wide x 850mm high
• 1000mm x 650mm x 850mm high • 1200mm x 650mm x 850mm high • 1500mm x 650mm x 850mm high
Optional Extras
Catering Sinks / Tables
• Additional strengthening (For microwaves etc.)• Cut out • End up-stand • Additional under shelf
• 320mm dia hand wash bowl• Drawer• Drawer with lock • Four 100mm castors (two with brake)
• 600mm to 2400mm long 650mm wide x 850mm high
Manufactured from 1.2mm thick grade 304, satin polished, stainless steel with 430 stainless steel, 30mm square tubular frame, internal shelf and adjustable feet.
Floor Cupboard
Wall Cupboard
Wall Shelves
Storage Racks
Manufactured from 1.2mm thick, grade 430, satin polished stainless steel with brackets.
Standard• 600mm to 2400mm long 300mm wide
Microwave• 600mm wide x 600mm long
Manufactured from 1.2mm thick, grade 304 satin polished stainless steel with grade 430 stainless steel, 30mm square tubular frame with adjustable feet.
Three Shelves• 600mm to 2400mm long, 400mm wide x 1500mm high
Four Shelves• 600mm to 2400mm long, 400mm wide x 1500mm high
Storage
Storage Equipment
Without Doors• 600mm to 2400mm long 650mm wide x 850mm high
Sliding or Hinged Doors• 600mm to 2400mm long 650mm wide x 850mm high
Without Doors• 600mm to 1500mm long 300mm wide x 600mm high
Sliding or Hinged Doors • 600mm to 1500mm long 300mm wide x 600mm high • Hinged door lock
Optional Extra
• Hinged door lock
Optional Extra
Dishwasher Items /Trolleys
01384 238 786
Dishwasher Canopy Manufactured from 1mm thick, grade 304, satin polished stainless steel with drain off and removable baffle plates. All canopies are manufactured to order, therefore alternative sizes and specifications are available on request.
Dishwasher Table
• 1000mm x 1000mm x 500mm deep
Trolleys
Manufactured from grade 304, satin polished, stainless steel removable shelves with grade 430 stainless steel, 30mm square tubular frame and four 100mm castors (two with brake).
• 900 x 450 x 900mm high
Two shelves
• 900 x 450 x 900mm high Three shelves
Manufactured from 1.2mm thick grade 304, satin polished, stainless steel with grade 430, stainless steel, 30mm square tubular stand. Please state the type of dishwasher.
Optional Extras
• 600mm to 2400mm long 610mm wide x 850mm high
• Ductwork and terminals • Valances• Cut outs
Optional Extras
• Three basket runners• Three basket shelves• Rubber scraping ring • 610mm x 455mm x 310mm pre-rinse bowl• Splash back• Single pre-rinse spray assembly • Weld in WDU supplied by others
www.midthermstainless.co.uk
ExtractionCanopies
Extraction canopies are used to extract cooking fumes or steam and to filter any grease, therefore improving the working environment within the kitchen. Canopies are manufactured from 1mm thick grade 304, satin polished, stainless steel with removable, washable, stainless baffle grease filters and a stainless steel drip tray. Standard construction is by welding.
The Compensation Air extraction canopy also allows the input and distribution of fresh external air, which compensates for the considerable loss heated air, normally extracted by a standard extraction canopy and also cools the hot cooking fumes and grease filters. This cost effective alternative, reduces heating costs and improves the overall performance of the canopy.
All canopies are manufactured to order, therefore alternative sizes and specifications are available on request. DW172 complaint, an installation service is available with expert advice from our technical staff.
Optional Extras
• Single or three phase plate or axial fan
• Fan speed controller• Noise attenuation• Internal lighting
• Carbon filters• Ductwork and terminals• Valances• Cut outs • Service spines & risers
Extraction Canopies
CompensAir Extraction Canopy
CompensAir Island Extraction Canopy
Standard Extraction Canopy
Standard Island Extraction Canopy
Established in 2000, Midtherm Laser has grown to be one of the leading subcontract laser cutting companies in Britain. Midtherm Laser is located in the West Midlands; 5 Bystronic lasers and 20,000 square foot of warehouse space allows us to service industry nationwide quickly and efficiently.
Midtherm Flue Systems is a British owned flue manufacturer with 50 years experience in the industry.
We are committed to providing excellence in both the products and the service we offer. With one of the largest flue manufacturing, storage and distribution facilities in the UK, we are able to supply direct from stock and rapidly produce for domestic, commercial and industrial customers worldwide.
Midtherm Powder Coating use an innovative powder coating process to create a visually pleasing, bespoke product. With nearly 40 years of experience all products are pre-treated, painted and cured in large ovens with a capacity of 5.25m x 2.3m x 2.5m at 200 degrees C. Powder coated using any RAL or BS colour, we offer a friendly, professional service and a quick turnaround so you are guaranteed a quality finish.
Other Products & Services
Midtherm Windvents operate on aerodynamic principles. They are driven by the provision of an air thermal effect with the corresponding extraction rate flow and a natural function of balance and equilibrium. To activate the process, the only energy required is for a low voltage controller unit that drives the dampers, modulating the input of natural air.
Schools and commercial buildings where Windvents have been installed have gained from reduced CO2 emissions, energy savings and occupants’ well-being. A fresh cool air supply delivered via natural ventilation has been proven to reduce staff sickness, reduce energy waste and increase occupants’ productivity compared to offices that have no provision to ventilate automatically.
Windvents
Midtherm Laser LimitedSub-Contract Laser CuttingTel: 01384 [email protected]
Midtherm Powder Coating LimitedSub-Contract Powder CoatingTel: 01384 [email protected]
Midtherm Flue Systems LimitedDomestic and Commercial Flue ManufacturerTel: 01384 [email protected]
Midtherm Stainless LimitedTel: 01384 238786 [email protected]
Midtherm Stainless specialises in made to measure stainless steel fabrications, manufactured by a highly skilled workforce. Established for over 30 years, the company (formally known as Alomgate) offers a wide range of catering equipment, kitchen extraction units and stainless steel fabrications.
With dynamic machinery and skilled staff, Midtherm Stainless is a bespoke company able to fabricate almost anything out of stainless steel. All products can be built to your specifications and dimensions with precision. When buying from Midtherm Stainless you are guaranteed loyalty, strength and durability.
The Midtherm Family
www.midthermstainless.co.uk