Stage Lighting Control Systems

Download Stage Lighting Control Systems

Post on 06-Mar-2015

117 views

Category:

Documents

6 download

Embed Size (px)

TRANSCRIPT

<p>ELECTRONIC GMBH</p> <p>THYRODYNStage and Auditorium Lighting Control Systems, Stage Lights</p> <p>SETTING SCENES ON STAGE AND AUDITORIUM</p> <p>Different colors, brightness or darkness have an effect on our well-being. They convey feelings such as joy, deep emotion, lightness or freedom. Performances in classic cultural areas such as theater, opera and ballet and, to an increasing extent, shows and events in hotels and other event facilities are influenced decisively by the technical light accents as well as the stage adaptation and stage settings. Light supports and accentuates the performance. Optimum use of lights and spots in combination with professional light control systems allow finely matched light scenes as well as light effects which underscore the dynamics of the performance. Sensitive light choreography supports advanced lighting technology, captivates the attention of the audience and heightens the intensity of the performance. The measuring rod for successful light design is not the number of lights but rather the manner in which they are used and how the illumination sequence is organized. Various color layouts (colored light, different light tones), differentiated dimming positions and correct positioning of the lights in the room are important constituents of successful light planning. The use of lights with different optical effects (with more or less sharp contours, closely bundled, scalable or dispersed, with hard core or focused light) are absolutely necessary to handle the many different technical lighting requirements. ALTENBURGER ELECTRONIC offers a complete range for light control with the THYRODYN product line for stages with up to 48 light circuits with integrated auditorium light controls.</p> <p>2</p> <p>3</p> <p>THE THYRODYN CONCEPT</p> <p>Control of stage and auditorium lighting is accomplished using a closed control concept which also includes color changes, curtains, switching operations and other functional sequences. The easy-to-use, programmable stage lighting controls with DMX 512 interface can be combined with the customer's auxiliary control components in a variety of forms whereby conventional controls, European Installation Bus (EIB) Systems or touch panels can be integrated.</p> <p>THYRODYN Controls for Stage and Auditorium Areas Control panel for general functions such as control for auditorium areas.</p> <p>Control panel for stage area</p> <p>4</p> <p>THYRODYN stage lighting controls from ALTENBURGER ELECTRONIC are exceptionally versatile in terms of design, operating convenience and application. The use of various keypads, single keys or switches, EIB control panels, touch panels or installation of controls provided by the customer presents no problems. The systems are available for stationary or mobile use.</p> <p>Programmable Control Panel for Auditorium Area Selection of 12 light scenes and pushbuttons "BRIGHTER/DARKER". In addition "On/Off" key, programming key as well as locking switch for limiting access to controls.</p> <p>5</p> <p>VERSIONS</p> <p>1</p> <p>Stage lighting control unit and separate keypad for variable or stationary operations. Keypad can also be used without stage light control. Stage lighting control unit with keypad at rear. Stage lighting control unit with integrated keypad on left or right side. Stage lighting control unit model SB with individual controls, group controls, if required with fader/mixer controls in conventional design with controls provided by customers. Operation of this version is extremely simple: It is particularly suitable for all situations where the operating personnel change frequently such as in schools and for amateurs performances. Mobile cart with storage compartment. Dimensions according to customer's requirements.</p> <p>2 3</p> <p>4</p> <p>1</p> <p>Stage lighting control unit</p> <p>5</p> <p>2</p> <p>6</p> <p>1</p> <p>Keypad</p> <p>4</p> <p>3</p> <p>5</p> <p>7</p> <p>PROGRAMMABLE LIGHT CONTROLS THYRODYN PL 12 / PL 24The PL 12 and PL 24 programmable controls offer entry into the professional sector in terms of handling and function. Nevertheless, the features are simple and logical. In comparison to conventionally designed controls, they offer significantly more features. Control and output stages are spatially separated so that the output module with uniform design can control spotlights with power ratings of up to 8 kW/circuit with phase control or up to 2 kW/circuit with phase cutoff.</p> <p>The PL 12 and PL 24 programmable controls offer the following features: The basic features with familiar operating functions include 2 preset registers, lightening keys for each circuit as well as fader/mixers are available immediately after switching on the unit. Capability of setting 12 or 24 mood registers on 4 pages (all totaled 48 or 96). The stored moods can be called up, modified and copied at any time. Moods can be selected with the lower circuit controls. A number of light moods can be mixed even when stored on different pages. Individual circuit values and moods can be transferred to the sequence memory. The sequence of the light moods can be assigned specific times. The sequence can be called with the GO key. It is possible to fade from any mood to another during the sequence (manual selection). Seven memory registers are available for programming running lights. Every step in the running light can correspond to the setting of one single circuit or a number of circuits or even entire moods. The speed of the running light can be controlled by an internal clock frequency generator, the speed can be varied. The PL 12 and PL 24 stage light controls are equipped with a DMX 512 output and a MICROPLEX output as standard features. Operation of all types of connections is possible simultaneously. For the DMX mode, the start address for the equipment to be controlled can be between 1 and 96 for the PL 12 and 24 control panel. External power pack for power supply.</p> <p>Technical Data PL 12 Number of circuits: Power supply: Outputs: Analog option: Dimensions: Weight: 12 (96 via crossbars) 12 V/AC 500 mA PL 24 24 (96 via crossbars) 12 V/AC 800 mA</p> <p>DMX 512 via XLR socket (5-pin) MICROPLEX via XLR socket (3-pin) 0-10 V W=391 mm/H=257 mm/D=72 mm 4 kg W=644 mm/H=257 mm/D=72 mm 5 kg</p> <p>8</p> <p>PL 12</p> <p>PL 24</p> <p>9</p> <p>Thyrodyn: PL 1624 / PL 1636 / PL 1648</p> <p>This family of programmable control panels is intended for professional use. They are suitable for control of 24, 36 or 48 circuits and can be expanded to 48, 72 or 96 circuits using crossbars. All functions for storage, running light or sequences are possible simply and clearly with a minimum of keys.</p> <p>Here as well, control stages and output stages are spatially separated from one another completely so that the output module with uniform design can control spotlights with power ratings of up to 8 kW with the phase control mode or up to 2 kW with the phase-interval control mode (for low-voltage halogen lamps with electronic transformers).</p> <p>The PL 1624, PL 1636 and PL 1648 offer the following features: The basic features with familiar operating functions include 2 preset registers, lightening keys for each circuit as well as fader/mixers are available immediately after switching on the unit. Capability of setting 24, 36 or 48 mood registers on 12 pages (all totaled 288, 432 or 576). The stored moods can be called up, modified and copied at any time. Moods can be selected with the lower circuit controls. A number of light moods can be mixed even when stored on different pages. Individual circuit values and moods can be transferred to the sequence memory. The sequence of the light moods can be assigned to specific times. The sequence can be called with the GO key. It is possible to fade from any mood to another during the sequence (manual selection). Eleven memory registers are available for programming running lights. Every step in the running light can correspond to the setting of one single circuit or a number of circuits or even entire moods. The speed of the running light can be controlled by an internal clock frequency generator, the speed can be varied. The PL 1624, PL 1636 and PL 1648 stage light controls are equipped with a DMX 512 output and a MIDI output as standard features. Operation of all types of connections is possible simultaneously. For the DMX mode, the start address for the equipment to be controlled can be between 1 and 512. The PLUS version also has a built-in 3.5" disk drive as well as VGA monitor port. External power pack for power supply.</p> <p>Technical Data</p> <p>PL 1624/48: PL 1636/72: PL 1648/96: Power supply: Outputs: Dimensions:</p> <p>24/48 direct control circuits (512 with crossbars) 36/72 direct control circuits (512 with crossbars) 48/96 direct control circuits (512 with crossbars) +5/+12 V/DC, 20 mA, external DMX 512 via XLR socket (5-pin) MIDI via standard DIN sockets W = PL 1624 766 mm, PL 1636 1007 mm, PL 1648 1250 mm D = 350 mm, H = 99 mm</p> <p>Weight: Options on PL-1600-Plus: Analog option:</p> <p>PL 1624 9 kg, PL 1636 11.7 kg, PL 1648 12.7 kg PC Floppy 3.5" VGA monitor port Analog dimmer control: 0...+10 V</p> <p>10</p> <p>PL 1624</p> <p>PL 1648</p> <p>11</p> <p>DIMMER RACK CABINETS FOR PROGRAMMABLE STAGE LIGHT CONTROLSGeneral technical data Line power connection Efficiency RF suppression Fusing Terminals Execution : 400/230V, 50 Hz : 0,98 : VDE 0875 suppression category N : Input NH fuses as required. Output circuit breakers with G or K characteristics : Inputs and outputs wired to inline terminals. MP to zero conductor terminals. SL inline terminals. : Dimmer Rack cabinets, sheet metal design with vent louvers and single or two-wing door. After opening doors, the circuit breakers and fuses are accessible. Installed equipment protected by cover plates.</p> <p>Depth 260</p> <p>Depth 260</p> <p>Model: GPL 6 Maximum equipment 6 plug-in modules 2 x 2 kW/kVA 2 kW/kVA, 3kW/kVA, 5kW/kVA, 8kW/kVA (phase-control mode) or 2kW-O (phase-interval control mode)</p> <p>Model: GPL 12 Maximum equipment 12 plug-in modules 2 x 2 kW/kVA 2 kW/kVA, 3kW/kVA, 5kW/kVA, 8kW/kVA (phase-control mode) or 2kW-O (phase-interval control mode)</p> <p>Depth 400</p> <p>Depth</p> <p>400</p> <p>Model: GPL 18 Maximum equipment 18 plug-in modules 2 x 2 kW/kVA 2 kW/kVA, 3kW/kVA, 5kW/kVA, 8kW/kVA (phase control mode) or 2kW-O (phase-interval control mode)</p> <p>Model: GPL 24 Maximum equipment 24 plug-in modules 2 x 2 kW/kVA 2 kW/kVA, 3kW/kVA, 5kW/kVA, 8kW/kVA (phase control mode) or 2kW-O (phase-interval control mode)</p> <p>12</p> <p>Color Cable entry MUX box Output modules</p> <p>: RAL 7032 : Incoming and outgoing cables from top through twist nipples : DMX 512, 1-72 circuits : The dimmer rack cabinets can be equipped with various output modules according to customer requirements. Additional equipment with other functions and modules is possible.</p> <p>Depth</p> <p>400</p> <p>Model GPL 36 Maximum equipment 36 plug-in modules 2 x 2 kW/kVA 2 kW/kVA, 3kW/kVA, 5kW/kVA, 8kW/kVA (phase control mode) or 2kW-O (phase-interval control mode) Example of customer system (9 output modules, EIB-European Installation Bus-auditorium control, terminals: Inputs and outputs from bottom).</p> <p>Depth 260 Depth 245</p> <p>Version complete with switch cabinet</p> <p>Version as installation plate in distribution (with or without cover)</p> <p>13</p> <p>STAGE LIGHTING EQUIPMENT</p> <p>Designation Floods and soft light</p> <p>Technical illumination description Less broad beam, predominantly focused light with defined edge, usually multicolored</p> <p>Application Illumination of playing area Overhead light Side light Horizontal light</p> <p>Symbol</p> <p>Fresnel lens spots</p> <p>Soft focusing with optically adjustable light area, with hard core and wide soft edge</p> <p>Proscenium or portal light</p> <p>Top and back light</p> <p>Wider beam, predominantly focused light, however with soft edge, usually multicolored</p> <p>Top light ramp Illumination of playing area</p> <p>Lens spots</p> <p>More or less sharply focused light with optically adjustable, uniformly illuminated area</p> <p>Playing area light for illumination bridges, working galleries, Z bridges</p> <p>Profile spots</p> <p>Sharp light concentration with optically adjustable and uniformly illuminated area, capable of use with templates</p> <p>Bridge lighting, portal light</p> <p>Profile spots</p> <p>Closely bundled with minimum flowing edge</p> <p>Light effect Follower spot Applause spot</p> <p>Follower spot</p> <p>Sharp-light concentration, sharply focused and uniformly illuminated area, capable of use with templates</p> <p>Follower spot</p> <p>Mobile sockets</p> <p>For free availability of various mobile lighting accessories</p> <p>Color changer</p> <p>As color changer or color feeding attachment</p> <p>In combination with spots</p> <p>14</p> <p> AND THEIR USE IN THE STAGE AREA</p> <p>15</p> <p>STAGE LIGHTS</p> <p>Flood Light Ramp 500 W, 1 BulbWith symmetrical aluminum reflector. Supplied with 1 m connection cable with grounded plug, 500 W bulb, filter frame; 4-color filters (yellow, red, blue; green), C hooks, safety cable, protective guard. Weight : Net, 2.2 kg Color foil dimensions : 245 x 155 mm Application distance : 2-5 m Vertical pivot range : +45/-45 Bulb : K1 R7 S 500 W/230 V Accessories : Protective glass, 4, 3, 2 wing aperture shields Photometric data Horizontal dia. m 3.2 Lux 913 m 2 Model AE-Coro S-1 9.7 101 6 16.2 37 10 Vertical dia. Lux m 1.9 1345 2 5.7 9.5 149 54 6 10 H 220 / W 280 / D 144</p> <p>Flood Light Ramp 500 W, 3 BulbsWith symmetrical aluminum reflector. Supplied with 3 x 1 m connection cable with grounded plug, 500 W bulb, filter frame; 4-color filters (yellow, red, blue; green), 2 x C hooks, 2 x safety cable, 3 x protective guard. Weight : Net, 5.1 kg Color foil dimensions : 245 x 165 mm Application distance : 2-5 m Vertical pivot range : +45/-45 Bulb : K1 R7 S 500 W/230 V Accessories : Protective glass, 4, 3, 2 wing aperture shields Photometric data Horizontal dia. m 3.2 Lux 913 m 2 Model AE-Coro S-3 9.7 101 6 16.2 37 10 Vertical dia Lux m 1.9 5.7 9.5 1345 149 54 2 6 10 H 220 / W 780 / D 144</p> <p>Flood Light Ramp 500 W, 4 BulbWith symmetrical aluminum reflector. Supplied with 4 x 1 m connection cable with grounded plug, 500 W bulb, filter frame; 4-color filters (yellow, red, blue; green), 2 x C hooks, safety cable, 4 x protective guards. Weight : Net, 6.6 kg Color foil dimensions : 245 x 165 mm Application distance : 2-5 m Vertical pivot range : +45/-45 Bulb : K1 R7 5 500 W/230 V Accessories : Protective glass, 4, 3, 2 wing aperture shields Photometric data Horizontal dia. m 3.2 Lux 913 m 2 Model AE-Coro S-4 9.7 101 6 16.2 37 10 Vertical dia. Lux m 1.9 5.7 9.5 1345 149 54 2 6 10 H 220 / W 1030 / D 144</p> <p>Fresnel lens spot 650 W / angle 7 60With 120 mm dia. Fresnel lens, glass reflector dia. 55 mm, spindle focusing with two microswitches. Supplied with 1 m connection cable with grounded plug, 650 W bulb, color filter frame, C hooks, safety cable, protective guard. Weight : Net, 4.2 kg Color foil dimensions : 150 x 150 mm Application distance : 2-10 m Bulb : T 26 GY 9.5 650 W Accessories : 4-wing aperture shield, color foils Photometric data Spot dia. m Lux m Model AE-Suono f 0.3 13400 2 650 1.1 838 8 2.1 238 15 Flood dia. Lux m 1.9 7.5 14 2160 1...</p>