st february 2019 - web.iisermohali.ac.in

भारतीय विज्ञान विक्षा एिं अनसुधंान ससं्थान मोहाली मानि संसाधन विकास मंत्रालय, भारत सरकार द्वारा स्थावित

सकै्टर 81,नॉलजे वसटी,ि॰ओ॰ मनोली, एस॰ ए॰ एस॰ नगर,मोहाली, िजंाब 140306

INDIAN INSTITUTE OF SCIENCE EDUCATION AND RESEARCH MOHALI (Established by Ministry of Human Resource Development, Govt. of India)

Sector-81, Knowledge city, PO-Manauli, SAS Nagar Mohali-140306, Punjab PAN No. - AAAAI1781K TAN NO. PTLI10692D

● Phone : +91-172-2240086 & 2240121 ● Fax : +91-172-2240124, 2240266 ● http://www.iisermohali.ac.in ● Email: [email protected]

CPPP/Institute Website

IISERM (1169)18/19Pur Dated- 1st February 2019

NOTICE INVITING E-TENDER

Online tenders are invited on behalf of Director, IISER Mohali in Two Bid System

{Technical and Commercial separately} for the supply of public health items as per list

enclosed and technical specification given below and BOQ list the original

manufacturer/supplier at CPPP i.e. https://eprocure.gov.in/eprocure/app. Tender

documents may please be downloaded from the E-procurement portal website

https://eprocure.gov.in/eprocure/app& Institute website www.iisermohali.ac.in.

-sd-

(Mukesh Kumar)

Assistant Registrar (S&P)

mailto:[email protected]

https://eprocure.gov.in/eprocure/app


http://www.iisermohali.ac.in/

http://www.etenders.kerala.gov.in/

भारतीय विज्ञान विक्षा एि ंअनसुधंान ससं्थान मोहाली मानि संसाधन विकास मंत्रालय, भारत सरकार द्वारा स्थावित

सकै्टर 81,नॉलजेवसटी,ि॰ ओ॰ मनोली, एस॰ ए॰ एस॰ नगर,मोहाली, िजंाब 140306

INDIAN INSTITUTE OF SCIENCE EDUCATION AND RESEARCH MOHALI (Established by Ministry of Human Resource Development, Govt. of India)

Sector-81, Knowledge city, PO-Manauli, SAS Nagar Mohali-140306, Punjab PAN No. - AAAAI1781K TAN NO. PTLI10692D

● Phone : +91-172-2240086 & 2240121 ● Fax : +91-172-2240124, 2240266 ● http://www.iisermohali.ac.in ● Email: [email protected]

CPPP/Institute Website

E-TENDER NOTICE

Tender Ref.- IISERM(1169)18/19Pur Dated :- 1st February 2019

Critical Date Sections Sr. Description Date Time

1. Tender Publishing Date and time 1st February 2019

07th

December

2016

6pm 2. Tender Document download start Date

/time Time 1st February 2019 6pm

3. Bid Submission start Date &Time 1st February 2019 6pm 4 Bid Submission End date and Time 21st February 2019 Up to 11am 5. Tender opening Date and Time 22nd February 2019 At 11:30am

Online tenders are invited on behalf of Director, IISER Mohali in TWO BID SYSTEM

{Technical and Commercial separate} for following item(s) from the original

manufacturer/supplier at CPPP i.e. https://eprocure.gov.in/eprocure/app. Tender

documents may please be downloaded from the E-procurement portal website

https://eprocure.gov.in/eprocure/app & Institute website http:/www.iisermohali.ac.in.

Tender fee in shape of DD/Banker Cheque of Rs 590/- (Non-refundable) and EMD of Rs

27,000/- should be submitted by DD /Banker Cheque/FDR/ Bank Guarantee in favour of

the Registrar, IISER Mohali payable at Mohali. However, scanned copy of the both

tender fee and EMD should be upload on website along with technical bid part. The hard

copy of the same in original to be send to the address mentioned below duly

superscribing the supply/work name and reference/ tender ID on the envelope and same

must reach before opening the bid and if not received within due date the bid will be

rejected summerly.

The Original EMD and Tender Fee should be sent to Assistant Registrar (S&P) Indian Institute of Science Education and

Research, Mohali Sector 81, SAS Nagar,

Mohali, Punjab, India, Pin: 140306

Non-receipt of original EMD and Tender Fee will lead to rejection of tender.

mailto:[email protected]




http://www.etenders.kerala.gov.in/

Public health Item Details: -

Sr. No. Description of Items Unit Required Qty.

1 PVC connection (1Mtr Length) SS breaded (Make: Viking/Jaquar/Jal) nos 100

2 PVC connection (1.5 Ft Length) SS breaded (Make: Viking/Jaquar/Jal) nos 100

3 PVC connection (2 ft Length) SS breaded (Make: Viking/Jaquar/Jal) nos 100

4 Jet (Make: RADISON/Jaquar/Jal) [(Flat Type) nos 15

5 Jet (Make: RADISON/Jaquar/Jal) (Round Type) nos 15

6 Spindle 3/4” (Make: Jaquar/ESSCO/SEIKO)] nos 25

7 Spindle 1/2” (Make: Jaquar/ESSCO/SEIKO)] nos 25

8 Consield spindle (Make: Jaquar) nos 40

9 Shower with rod (Make: Viking/Jaquar/Jal) nos 10

10 Bottle trap (Make ESCO/Jaquar/Jal)) brass nos 40

11 Sink waste coupling 4" x 1 1/4" (Make: ESSCO/SEIKO) nos 20

12 PVC ball cock with long rod (Make: Cera/Super floor) nos 70

13 Urinal pipe (Make: Viking/SVW/Unik) (1 mtr) nos 40

14 Waste pipe (Make: Viking/SVW/Unik) (1 Mtr) nos 40

15 Hand shower with 1 mtr long PVC tube & wall hook (make: Jaquar / Jal

/ Viking) nos 40

16 Bib cock 1/2" – Small (Make: Viking/Jaquar/Jal) nos 25

17 Bib cock 1/2"- Long (Make: Viking/Jaquar/Jal) nos 30

18 Piller cock 1/2" (Make: Viking/Jaquar/Jal) nos 10

19 Gasket 5mm Black (Standred quality) nos 10

20 Gasket 5mm white (Neopren) (Standred quality) nos 5

21 Angle valve 1/2" (Make: Viking/Jaquar/Jal) nos 35

22 Leg mixture brass (Make: Jaquar) nos 40

23 Extension nipple 1" CP (Make: Viking/SVW/Unik) nos 30

24 Short bend SS breaded 1 1/4”xL2' (Make: Viking/Jaquar/Jal) nos 10

25 Ball valve 1/2"- brass (Make: Zoloto/ Viking/ Jal) nos 25

26 Ball valve 1"- brass (Make: Zoloto/Viking) nos 15

27 Ball valve 1 1/2" - brass (Make: Zoloto) nos 5

28 Ball valve 3/4" - brass (Make: Zoloto) nos 25

29 Ball valve 2" - brass (Make: Zoloto/Jal/Viking) nos 5

30 Ball valve 1 1/4" - brass (Make: Zoloto) nos 5

31 CPVC MTA 3/4"x3/4" (Make: Ajay) nos 10

32 CPVC MTA 2" (Make: Astral/Ajay/Ganga) nos 5

33 CPVC MTA 1" X 1" (Make: Astral/Ajay/Ganga) nos 5

34 CPVC MTA 1/2" (Make: Astral/Ajay/Ganga) nos 5

35 CPVC FTA 1/2" (Make: Astral/Ajay/Ganga) nos 5

36 Screw driver 9" (2-In-1) (Make: TAPARIA/ Pi/ Dorma/Hira) nos 5

37 Screw driver 9" single (Make: TAPARIA/ Pi/ Dorma/Hira) nos 5

38 Screw driver 6" (2-In-1) (Make: TAPARIA/ Pi/ Dorma/Hira) nos 5

39 Screw driver 6" single (Make: TAPARIA/ Pi/ Dorma/Hira) nos 5

40 Chisel -1' (Standred quality) nos 15

41 Hammer- 1kg (Standred quality) nos 10

42 Parrot player (Make: TAPARIA/ Pi/ Dorma) nos 10

43 Tee GI 1/2" (Make: SVW/Unik/Jindal) nos 20

44 Tee GI 3/4” (Make: SVW/Unik/Jindal) nos 15

45 GI Tee 1 1/4" x 1/2" (Make: SVW/Unik/Jindal) nos 5

46 CPVC Tee 3/4" x 1/2" (Make: SVW/Unik/Jindal) nos 10

47 CPVC Tee 3/4" (Make: SVW/Unik/Jindal) nos 5

48 CPVC Tee 1 1/2" x 3/4" (Make: SVW/Unik/Jindal) nos 5

49 CPVC Tee 1 1/2" (Make: SVW/Unik/Jindal) nos 10

50 PVC Tee 2" (Make: SVW/Unik/Jindal) nos 5

51 PVC connection washer pkt 2

52 Spindle washer 1/2" pkt 1

53 CPVC Union 1 1/2"(Make: Astral/Ajay/Ganga) nos 30

54 CPVC union 3/4" (Make: Astral/Ajay/Ganga) nos 10

55 CPVC union 1" (Make: Astral/Ajay/Ganga) nos 10

56 CPVC union 1 1/4" (Make: Astral/Ajay/Ganga) nos 10

57 CPVC Union 2"(Make: Astral/Ajay/Ganga) nos 6

58 CPVC Elbow FTA 3/4" x 1/2" (Make: Astral/Ajay/Ganga)) brass nos 30

59 CPVC elbow 2" (Make: Astral/Ajay/Ganga) nos 20

60 CPVC elbow 1 1/2" (Make: Astral/Ajay/Ganga) nos 30

61 CPVC elbow 1 1/4" (Make: Astral/Ajay/Ganga) nos 20

62 CPVC elbow 1" (Make: Astral/Ajay/Ganga) nos 35

63 CPVC elbow 3/4" (Make: Astral/Ajay/Ganga) nos 35

64 CPVC Elbow 3/4" x 1/2" (Make: Astral/Ajay/Ganga) nos 10

65 CPVC Ball Valve 3/4" (Make: Astral/Ajay/Ganga) nos 20

66 CPVC Ball Valve 1/2" (Make: Astral/Ajay/Ganga) nos 5

67 CPVC socket 2" (Make: Astral/Ajay/Ganga) nos 3

68 CPVC socket 1 1/2" (Make: Astral/Ajay/Ganga) nos 70

69 CPVC socket 1 1/4"(Make: Astral/Ajay/Ganga) nos 25

70 CPVC socket 1" (Make: Astral/Ajay/Ganga) nos 35

71 CPVC socket 3/4" (Make: Astral/Ajay/Ganga) nos 15

72 GI union 2" (Make: SVW/Unik/Jindal) nos 10

73 GI union 1 1/2" (Make: SVW/Unik/Jindal) nos 10

74 GI Socket 1/2" (Make: SVW/Unik/Jindal) nos 20

75 GI socket 2" (Make: SVW/Unik/Jindal) nos 6

76 GI socket 1 1/2" (Make: SVW/Unik/Jindal) nos 20

77 GI socket 1 1/4" (Make: SVW/Unik/Jindal) nos 10

78 GI socket 1" (Make: SVW/Unik/Jindal) nos 10

79 PVC Socket 2" (Make: Astral/Ajay/Ganga) nos 5

80 GI Elbow 2" (Make: SVW/Unik/Jindal) nos 2

81 PVC Elbow 2" (Make: Astral/Ajay/Ganga) nos 5

82 GI Hexa Nipple 1/2" (Make: SVW/Unik/Jindal) nos 100

83 GI Nipple 1/2" X 4" (Make: SVW/Unik/Jindal) nos 25

84 GI Nipple 1/2" X 6" (Make: SVW/Unik/Jindal) nos 10

85 GI Nipple 2"x2" (Make: SVW/Unik/Jindal) nos 5


87 GI Nipple 1 1/2"x4" (Make: SVW/Unik/Jindal) nos 5


89 GI Nipple 3/4"x2" (Make: SVW/Unik/Jindal) nos 5

90 GI Nipple 3/4"x4" (Make: SVW/Unik/Jindal) nos 10

91 GI Hexa Nipple 1" (Make: SVW/Unik/Jindal) nos 10

92 GI Hexa Nipple 1 1/4" x 3" (Make: SVW/Unik/Jindal) nos 10

93 GI Nipple 3/4" x 6" (Make: SVW/Unik/Jindal) nos 10

94 GI Hexa Nipple 1 1/4" x 6" (Make: SVW/Unik/Jindal) nos 10

95 CPVC Nipple 3/4"x4" (Make: Astral/Ajay/Ganga) nos 10

96 GI Reduser 1 1/4" x 1" (Make: SVW/Unik/Jindal) nos 5

97 GI Reduser 1 1/4" x 1" (Make: SVW/Unik/Jindal) nos 5

98 GI Reduser 3/4" x 1/2" (Make: SVW/Unik/Jindal) nos 5

99 GI Reduser 2" x 1" (Make: SVW/Unik/Jindal) nos 5

100 Plastic Hinges for seat cover nos 50

101 Pipe wrench 14” (Make: TAPARIA/ Pi/ Dorma/Hira) nos 10

102 Pipe wrench 18” (Make: TAPARIA/ Pi/ Dorma/Hira) nos 7

103 Raincoat waterproof nature hiking rain jacket (Standred quality) nos 10

104 Gum boot (Standred quality) nos 2

105 Hexa Blade (Single SS cutting side) nos 10

106 Hexa Blade (Double side) (Standered quality) nos 20

107 Stainless Steel Door Stopper (Make: BOSCO) nos 100

108 Looking Mirror size 24"x 18" (HxW) 5mm thick glass with beveled

edge and four holes for screw (Make: Modiguard / Saint Gobinn) nos 50

109 Door Closer (Make: Dorma/Universal) nos 50

110 Slider 18" (Make: SUPREMUS/ SOLITAIRE/ SOFT CLOSE) nos 10

111 Slider 20" (Make: SUPREMUS/ SOLITAIRE/ SOFT CLOSE) nos 10

112 Soap dispenser (Make: Viking) nos 30

113 Door Seal (3 ft length) (Standered quality) pkt 5

114 Earl 8" (Standered quality) nos 10



117

Wall face un-plasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A. 6kg pressure(i) Single socketed 160mm dia pipes.(Make:

Astral/Kisan/Diplast)

mtr 300

118

Wall face un-plasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A. 6kg pressure

(i) Single socketed 110mm dia pipes.

(Make: Astral/Kisan/Diplast)

mtr 250

119 CPVC pipe 3/4" (Make: Astral/Ajay/Supreme) mtr 200

120 Hand grinder (D-Walt/BOSSCH) nos 1

121 Angle MS cutting blade for hand grinder pkt 3

122 UPVC Union 1 1/2" (Make: SVW/Unik/Jindal) nos 10

123 UPVC Union 2" (Make: SVW/Unik/Jindal) nos 10

124 UPVC socket 1 1/2" (Make: SVW/Unik/Jindal) nos 10

125 UPVC Socket 2" (Make: SVW/Unik/Jindal) nos 10

126 UPVC Tee 1 1/2" (Make: SVW/Unik/Jindal) nos 10

127 UPVC Tee 2" (Make: SVW/Unik/Jindal) nos 10

128 UPVC MTA 1 1/2" (Make: SVW/Unik/Jindal) nos 10

129 UPVC MTA 2" (Make: SVW/Unik/Jindal) nos 10

130 UPVC FTA 1 1/2" (Make: SVW/Unik/Jindal) nos 10

131 UPVC FTA 2" (Make: SVW/Unik/Jindal) nos 10

132 UPVC pipe 1 1/2" (Make: SVW/Unik/Jindal) mtr 6

133 UPVC pipe 2" (Make: SVW/Unik/Jindal) mtr 6

134 UPVC Elbow 1 1/2" (Make: SVW/Unik/Jindal) nos 10

135 UPVC Elbow 2" (Make: SVW/Unik/Jindal) nos 10

136 Water meter 1 1/2” (Make: Karanti) (Thread type) nos 5

137 Water meter 1 1/2” (Make: Karanti) (Flange type) nos 3

138 Water meter 2” (Make: Karanti) (Thread type) nos 4

139 Tool kit bags (Standred quality) nos 15

140 Rubber pipe (Standred make) (100 ft x 3) ft 300

141 CPVC pipe 1 1/2" (Make: Ajay/Astral/Kisan/Diplast) mtr 300

142 CPVC Bush 2"x1 1/2" (Make: Astral/Ajay/Ganga) nos 3

143 Bush CPVC 1 1/2"x3/4" (Make: Astral/Ajay/Ganga) nos 10

NB:-

1. The online updated Price BOQ is in INR format. If bidder want to quote other than

INR please specify the quoted currency in the technical bid/part and fill the amount

in same updated BOQ.

2. The bidder/Agency to have local office in Chandigarh/Mohali/Panchkula.

3. The bidder must have executed at least one supply related to public health items of

value ₹ 6 lakh in Govt./Semi Govt./Autonomous bodies/Central PSU/State Govt. or

two supply related to public health items of value ₹ 4.80 lakh, out of which at least

one supply in Govt./Semi Govt./Autonomous bodies/Central PSU/State Government.

SUBMISSION OF TENDER

I. All bid/ tender documents are to be uploaded online at Central Public Procurement portal i.e.

https://eprocure.gov.in/eprocure/app only and in the designated cover/ part on the website

against tender ID. Tenders/ bids shall be accepted only through online mode and no manual

submission of the same shall be entertained except tender fee and EMD. Late tenders will not

be accepted.

II. The online bids shall be opened at the office of the Assistant Registrar (P&S), IISER Mohali,

on above given date and time. If the tender opening date happens to be on a holiday or non-

working day due to any other valid reason, the tender opening process will be attended on the

next working day at same time and place. IISER Mohali will not be responsible for any error

like missing of schedule data while downloading by the Bidder.

III. The bidder shall upload the tender documents duly filled in and stamped by the authorized

signatory on each and every page. Tender not submitted/uploaded in the prescribed form and as

per the tender terms and conditions shall be liable for rejection.

IV. The bidder shall upload scanned copy of the PAN Card, GST number duly signed and stamped.

Also bidders applying against ‘MSME/NSIC Certificate” issued by appropriate Authority,

should ensure that the certificate attached is relevant to the area of service/supply. For

example, If the tender is for “supply & installation of Desktop” the certificate should be

issued for activity/area of “Computer supply and services activities etc” otherwise bid will be

REJECTED without notice.

V. E-procurement system ensures locking on the scheduled date and time. The system will not

accept any bid after the scheduled date and time of submission of bid.

INSTRUCTIONS


1. The Online bids should be submitted directly by the original manufacturer/supplier, If quotation is submitted/filled by any representative/agent/dealer then they must upload a authority certificate from the principal company for quoting the price otherwise such quotation will be rejected.

2. The quantity mentioned in this inquiry is and shall be deemed to be only approximate and will

not in any manner be binding on the Institute. Before the deadline for submission of the online bid, IISER Mohali reserves the right to modify the tender document terms and conditions. Such amendment/modification will be notified on website against said tender ID.

3. The rates offered should be FOR Chandigarh/Mohali in case of firms situated outside

Chandigarh/Mohali, and free delivery at the Institute premises in case of local firms. Supplier from outside India should mention the Ex-works/FOB/FCA/CIF/CIP price clearly. Conditional tenders will be summarily rejected.

4. In case of Ex-godown terms the amount of packaging forwarding freight etc. should clearly be

indicated by percentage or lump sum amount. Institute has policy not to make any advance

payments towards any purchase, Letter of credit can be opened if required.

5. THE INSTITUTE IS EXEMPTED FROM EXCISE AND CUSTOM DUTY under notification no- TU/V/RG/-CDE(1062)/201 CUSTOM DT.30.08.2016.

6. Tax: This Institute is not exempted from the payment of GST. The current rate (i.e. percentage of

GST should be clearly indicated included or excluded) wherever chargeable. Please also provide/upload the copy of PAN card, GST number duly self-attested.

7. Concessional GST is applicable for all the items purchased for Research labs vide Ministry of Finance, notification no. 45/22017 dated 14.11.2017 and 47/2017 dated 14.11.2017.

8. Bidder/s quoting in currency other than Indian Rupee (INR) should explicitly mention the

currency in which tender quoted wherever applicable in Technical Bid along the tender documents.

9. The delivery period should be specifically stated. Earlier delivery will be preferred.

10. The firms are requested to provide/upload detailed description and specifications together with

the detailed drawings, printed leaflets and literature of the article quoted. The name of the manufactures and country of manufacture should also invariably be stated. In the absence of these particulars, the quotation is liable for rejection.

11. Validity of offer: 90 days. The warranty period after satisfactory installation should be mentioned and firm should replace all manufacturing defect parts/ whole item under warranty without any extra cost including clearance, freight, taxes. Security deposit/ Bank Performance Guarantee @ 10 % of the value of supply order as per norms may be sought from the firms.

12. The right to reject all or any of the quotation and to split up the requirements or relax any or all the above conditions without assigning any reason is reserved by the IISER Mohali. For any corrigendum and addendum please be checked the website https://eprocure.gov.in/eprocure/app and http:/www.iisermohali.ac.in

13. Disputes, if any, shall be subject to jurisdiction in the court of Mohali only.

–sd/-

(Mukesh Kumar) Assistant Registrar (S&P)



st february 2019 - web.iisermohali.ac.in

Documents