ssa configuration guide for mac10.6
TRANSCRIPT
-
8/2/2019 Ssa Configuration Guide for Mac10.6
1/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
Seamless and Secure Access(SSA)
Manual Configuration Guide
for Mac OS X 10.6
Page 1
-
8/2/2019 Ssa Configuration Guide for Mac10.6
2/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
1 Connect to Wireless@SG via SSA
a) Choose Apple > System Preferences > Network. The Network configuration dialog isshown below. Ensure that AirPort is turned on.
Page 2
-
8/2/2019 Ssa Configuration Guide for Mac10.6
3/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
b) Select Airport, and click Advanced button. In the configuration dialog box below,select 802.1X tab for creating the profile.
Page 3
-
8/2/2019 Ssa Configuration Guide for Mac10.6
4/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
c) Click Add (+) at the bottom of the profiles list, and choose Add User Profile.
Page 4
-
8/2/2019 Ssa Configuration Guide for Mac10.6
5/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
d) Name the user profile as Wireless@SGx. Enter your Wireless@SG username followedby @domain format and your Wireless@SG password. Enter Wireless@SGx forWireless Network. The Wireless Network is case-sensitive. Select WPA Enterprisefor Security Type. By default, TTLS and PEAP are selected.
username@domain
Page 5
-
8/2/2019 Ssa Configuration Guide for Mac10.6
6/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
e) Select TTLS in the authentication list and click Configure. In the TTLS configurationdialog, TTLS Inner Authentication must be MSCHAPv2. Click OK to save theconfiguration.
f) To save the profile and apply the configurations, click OK in the 802.1X tab, and thenclick Apply.
Page 6
-
8/2/2019 Ssa Configuration Guide for Mac10.6
7/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
g) In the Network Name list, select Wireless@SGx network, and click Connect. Theauthentication will start.
h) If it is the first time you are connecting to the hotspot, the server certificate will beshown:
Page 7
-
8/2/2019 Ssa Configuration Guide for Mac10.6
8/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
i) Click Show Certificate button, and then the detailed information will be shown asbelow. Change the option for When using this certificate to be Always Trust. Then,click Continue.
j) To change the certificate trust settings, the system pops up the login dialog box to
confirm the changes. Key in the administrators name and password, and click OK tocontinue.
Page 8
-
8/2/2019 Ssa Configuration Guide for Mac10.6
9/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
k) Once the server certificate is accepted, you are connected to the hotspot.
Page 9
-
8/2/2019 Ssa Configuration Guide for Mac10.6
10/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
2 Uninstall SSA profile
a) Choose Apple > System Preferences > Network. Click the Turn AirPort Off buttonto turn off the Airport.
Page 10
-
8/2/2019 Ssa Configuration Guide for Mac10.6
11/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
b) Click Advanced button, in the AirPort tab. The Wireless@SGx hotspot isremembered as the preferred network. Select Wireless@SGx, click Remove (-), andthen click OK to save.
Page 11
-
8/2/2019 Ssa Configuration Guide for Mac10.6
12/12
Seamless and Secure Access (SSA) Manual Configuration Guide for Mac OS X 10.6 (Rev. 1.0)
c) Click Advanced button again. In the 802.1X tab, select the Wireless@SGx profile,and click Remove (-) button at the bottom of the profile list to remove the profile. ClickOK to save.
username@domain
Page 12