Spy watch camera user guide W1000 5000

Download Spy watch camera user guide W1000 5000

Post on 30-Jun-2015

130 views

Category:

Technology

1 download

Embed Size (px)

DESCRIPTION

www.spycamerabestbuy.com spy watch camera

TRANSCRIPT

<ul><li> 1. 1080P 1 A B C/ DUSB E F G H </li></ul> <p> 2. 3 30 USB 3 USB AMIC1 B-MIC2 USB AMIC1 3. BMIC2 USB 4. 2 1.1 B 5. 1.2 A C . 1.3 USB D . 1.4 G F 1.5 H 3 USB A C PC CAMERA 1 Press the Button,A until the blue light is burning Release the Button. The blue indicator is burning. The blue indicator will be off after it flashes three times within about 4 seconds. It is recording Video with Audio now. A 4 6. C A A A 2 / C 3 C 3 A C A 1 4 A C C A 1 5 U USB 7. U 6 USB Standard Camera 6 -- USB Windows *.txt 2012.01.24 13:30:30 Y time.txt USB 8. WriteTime.exe WriteTime.exe update 7 * _DCIM100DSCIM usb 8 5 9. 5 4 AVI M-JPEG 1920*1080 JPG Windows me/2000/xp/2003/vistaMac os 10.4Linux DC-5V Mini 4 Pin USB TF 5 10. 040C 11. HD IR CAMERA WATCH USERS MANUAL Profile This product is the first wristwatch with HD 720P digital function,camera function,PC Camera.It looks lovely,but a useful wristewatch.The lovely designed wristwatch is easy to operate. Before use please read the following Its the NEW Design waterproof wristwatch with High Resolution(720P),when we started to design it,we consider the workarts of waterproof under 30meters.But because the construction of this product,it can not be used underwater more than 3 meters.It does a good job underwater within 3 meters and weatherproof. The nut,AMIC1 and the nut,B:MIC2 are microphone hole nut,the height of them are same. The nut A,MIC1 is with a hole in the center of the nut(the following picture),it is for transmite the sound.If the environment permit,please use this nut.When you take the video,the equipment also can record the sound. The nut,BMIC2 is without the hole,but it is with a rubber fitting inside which can anti- water,When it is in the humidity or dust environment,please use this nut.But when you use this nut,the equipment can not record the sound. 12. Please tighten the nuts when you use the equipment. Before use the nut,please check if the rubber is inside of the nut.If not,please change the new one. Picture1 THE NUT STRUCTURE SHOWED AS FOLLOWING PICTURE: Picture2 13. The following Spare Parts introduction showed as the picture3 Spare Parts a) Mode Key:No.A.. is for switching between Video,Camera,Playback. b) InterfaceUSBNo.Bis for connecting pc or recharger. c) Operation Key:No.C,it is for Turning on or off,Video,Pause. d) Lence:No.D,Taking in the signal of Video. e) Time Reset:No.E,it is for resetting the time showing on wristewatch. STRUCTURE Picture3 14. AMODE SWITCH BAV OUT/USB INTERFACE CON/OFF DCAMERA ETIME OPERATION KEY FAUDIO HOLE GINDICATOR OPERATION On Press the key,No.C for about two seonds,the red light and bule light will be burnning together,when the red one is off and blue one is burning.The equipment is in the status of standby. Off In the condition of standby or video,press the key,No.C for two secondes, the equipment will be off after the red light is shining for three time.The equipment will be off after three minutes in the condition of standby if it does not receive any order. Video:In the condition of standby,after you click the key No.C,the blue light will flash.It means the equipment is taking video.During the video,if you click the key,No.C,the equipment will stop taking video,after it saves the file,then, it enters into the standby status. Camera:In the condition of standby,after you click the key,No.A for one time.The bule light will be off and red light will be burning,It means its in the status of Camera.Then,if you click the Key,C for one time.The red light will flash one time.It means it takes one picture and saves it as JPG file. 15. Playback:First,turn off the equipment,then,connect the equipment and PC.Second:Change TV to AV status,then turn on the equipment.After it is in the status of standby,please click the Button,A for two times,the red light and blue light will be burning together.It means it is in the status of Playback Standby Status.You can find there is a playback file on the screen of TV,it is the last file you took.If it is the video file,it will play the file,and at the same time,the red light and blue light will flash alternately.If you press the button,C,it will stop playing.If you want to playback the next,please press the button,A for two seconds to choose the next and playback it.If you click the button,A,the equipment will get off from the playback status. Reset:If the system halted,please press the key,No.A and the key,No.C together.It can reset the equipment. Mobile Disc:When it is in the condition of the off or standby status,you can connect the equipment and the PC.The mobile disc sign will show in the screen. Charge:After you connect the equipment and PC or charger,the red light is burning.After it is full,the red light will off. Time Reset: First step:Turn Off the equipment.Second,Connect the equipment and PC;Third:After you open the mobile disc,you can find there is one file named Write Time.exe;Fourth:Click the file,Write Time.exe in the mobile disc,there will be a little window showing in the screen.Press it to update it.Then,disconnect the equipment and PC. FAQ If the capacity is full,the blue light and red light will shine for about five seconds and power off after it stores the file. If the power is low, the equipment will store the file and power off after the blue light and red light will be shine alternately for about five seconds. If the equipment stop responding for unknown reason or wrong operating,please press the mode key and operating key together to reset. Parameter Iterm Parameter VIDEO FORM AVI Video Coding M-JPEG 16. Resolution 1920*1080 Player Software Operating systems or mainstream movie playback software Picture Format JPG Image Scaling 4:3 Suppot System Windows me/2000/xp/2003/vistaMac os 10.4Linux VOL DC-5V Interface-type Mini USB Memory Card Format Nand flash Battery High-capacity polymer lithium battery Notice Work place:It is only for legal place. Battery:You need to charge it after it does not work for long time. File safty:It is not the professional memory card,so it can not instead of professional memory card completely.you need to keep back-up. Video quality:It is not the professinal video equipment,so it can not instead of professional Video Equipment completely. Working tempreture: 045C,it is better to use in the room tempreture. Working humidity:20%-80%,it is with waterproof function.Before you enter into the waterproof status,do not put it into water or humidy place. Illuminance: Please to use it in the luminous place. Cleanliness:it is better not to use it in the dust place. Other iterms:It can not use in the high magnetic fields , uniform electric field.It can not be striked,quick hardly. Notice:Please contact the local selleres if you need any other more inforamtion or help. USER MANUAL 17. (FULL HD,IR NIGHT VISION) 1,Profile A,ON/OFF B,Indicator C,IR/Mode Button D,USB E,IR Indicator F,Lens,G,Mic H,Time Reset Button Introduction 1) A Button It is for turn on/turn off the camera,record video,pause 2) B Button Indicator B Button is MODE Indicator.Blue is for Video Mode Red is for Photo Mode Red light and Blue light are burning at the same time,it is for sound record Mode. 3) C Button It is Mode Button,for switching between recording video,shooting photo,sound record and IR Night vision function. 4) D USB interface It is the data transfer interface slot 5) E IR Indicator It is the working status of IR. 6) F Lens It is the lens to record video 7) G MIC It is for recording the Audio 8) H Time Reset It is for reset the time of watch Notice: It is the first FULL HD IR Night Vision Watch Camera with waterproof in the world. We design this Waterproof Watch,we used some waterproof standard for waterproof 30 meters workarts.But because of the special construction of this IR watch,this watch can not use underwater Picture is only for reference 18. 30 meters. Normaly,you can use it underwater within 3 meters. This manual introduce how to operate correctly.Please be sure you understand it completely before using. Special Parts Construction and Introduction The nut,AMIC1 and the nut,B:MIC2 are microphone hole nut,the height of them are same. The nut A,MIC1 is with a hole in the center of the nut(the following picture),it is for transmite the sound.If the environment permit,please use this nut.When you take the video,the equipment also can record the sound. The nut,BMIC2 is without the hole,but it is with a rubber fitting inside which can anti-water,When it is in the humidity or dust environment,please use this nut.But when you use this nut,the equipment can not record the sound. Please tighten the nuts when you use the equipment. Before use the nut,please check if the rubber is inside of the nut.If not,please change the new one. Picture1 THE NUT STRUCTURE SHOWED AS FOLLOWING PICTURE: Picture2 19. 2,Introduction of Product This product is the first FULL HD IR Night Vision watch camera with shooting photo,recording video,sound recording,IR night vision functions.And,this baby is so practical,just for the users from business,education,editor etc. 3,Operation 1)Video Press the Button,A until the blue light is burning Release the Button. The blue indicator is burning. The blue indicator will be off after it flashes three times within about 4 seconds. It is recording Video with Audio now. 2)IR Function On In the status of recording Video with Audio,press the Button,C for about four seconds,then,release it The red indicator flashes three times. Off 20. Press and release the Button,C for one time The Blue Indicator flashes three times 3)Shooting a Photo In the status of recording Video with Audio,press and release the Button A for two times The Blue Indicator is burning Press and release the Button,C The Red Indicator is Burning Press and Release the Button,A for one time The Red Indicator flahse one time 4)Record Sound In the status of Recording Video with Audio,Press and release the Button A for two times The Blue Indicator is burning Press and release the Button,C for one time The Red Indicator is burning Press and release the Button C again Red and blue Indicators are burning at the same time Press and release the Button,A for one time The Red Indicator and Blue Indicator flashes alternately 5)Movable Disc Turn Off the Camera Connect the Camera and PC with Original Cable There is the sign of Movable Disc in My Computure 6)Web Camera Turn On the Camera Connect the Camera and PC with Original Cable There is the sign of Standard Camera in My Computure Notice: If the computure can not recognize the camera,please try again. 7) Time Reset Handle Reset Turn off Camera Connect Camera and computure with original USB Cable The Movable Disc will be shown on computure Open the Movable Disc Creat a file, *.txt Input 2012.01.24 13:30:30 Y Save the file as time.txt Disconnect the camera and computure Audo Reset Turn off Camera Connect Camera and computure with original USB Cable The Movable Disc will be shown on computure Open the Movable Disc Click the file WriteTime.exe in the folder of Movable Disc two times Click Update 21. 8)Movable Disc Turn off the Camera(or the camera is in the standby status) Connect the watch camera and computure with USB Cable Notice: If the computure can not recognize the movable disc,please try again. 4,FAQ The watch camera is off after the red light and blue light are flashing for 5 seconds. Answer:It is because of there is no enough memory,before the camera is off,it will save the file auto-maticaly. The watch camera is off after the red light and blue light are flashing alternetely for 5 seconds. Answer:No Power What should I do when the camera stuck because of the wrong operation or any other unknown reasons? Answer:Please press the Mode Button and On/Off Button together to reset the camera. 5,Specification Iterm Parameters Video Form AVI Video Code M-JPEG Video 1920*1080@15fps Software Operation system or major audio and video playback software Image JPG System Windows me/2000/xp/2003/vistaMac os 10.4Linux Voltage DC-5V Data Transfer Interface Mini 4 Pin USB Memory TF Battery Li-ion Battery Notice Work place:It is only for legal place. Battery:You need to charge it after it does not work for long time. File safty:It is not the professional memory card,so it can not instead of professional memory card completely.you need to keep back-up. Video quality:It is not the professinal video equipment,so it can not instead of professional Video Equipment completely. Working tempreture: 040C,it is better to use in the room tempreture.It is because of the IR Function if you find the tempreture is rising when you use IR function.The 22. battery working time will drop down at this condition. Working humidity:20%-80%,it is with waterproof function.Before you enter into the waterproof status,do not put it into water or humidy place. Illuminance: Please to use it in the luminous place. Cleanliness:it is better not to use it in the dust place. Other iterms:It can not use in the high magnetic fields , uniform electric field.It can not be striked,quick hardly. Notice:Please contact the local selleres if you need any other more inforamtion or help. </p>