spray vavle catalog
TRANSCRIPT
-
7/26/2019 Spray Vavle Catalog
1/8
SPRAY VAVLE
Plant Engineering Solution & Servi ce Corporation
Double spring
Spray
Valve
PESSCO CO., LTD.
DSV is paten ted item.
(Reg. No. 10-0423264)
-
7/26/2019 Spray Vavle Catalog
2/8
SPRAY VALVE Double spring Spray Valve
PESSCO
Plant Eng ineering Solution & Service Corpor ationRm 617 Byeoksan Digital Valley, 303, Daedong-ro, Sasang-gu, Busan, Korea
TEL
FAX
:
:+82-51-329-7145
+82-51-329-7155
Web
E-mail
:
:www.pessco.com
1
Acco rding to...
the report of spray nozzle troubles in the deaerator of power
plants, the tilting of the valve disc due to perpendicular flow
impingement causes undue ware on disc and seat as well
as non-uniform flow distribution and noise.
Now, after doing our best to solve these problems,
PESSCOhas developed DSV (Double spring Spray Valve)
based on the following design concepts.
For additional technical information or
applications engineering assistance,
please contact www.pessco.com .
1st Conical-parabolic shaped DISC minimizes or prevents
the perpendicular flow impingement and insures uniform
spray pattern.
2nd
Double spring control sudden movement of DISCdue to operation mode changes therefore can prevent
undue wear on DISC and noise.
3rd
4th
5th
6th
7th
8th
Streamlined Leg sections attached to the seat
prevent non-uniform spray pattern broken at the three
points.
DISCmanufactured by pressing work minimizes thick-
ness reduction compared to spinning work.
Movable Non-binding Teflon Sleeve minimizes
frictional resistance and maximizes trouble-free life.
Double spring made of Stainless Steel Grade 631J1because of its standing heat property for high
temperature.
Double spring provides two support points of the
STEM, top and bottom.
New BODY design minimizes fluid flow resistance
through the adapter pipe.
Provides...
Flexible Instal lation
and Best Spray Pattern
DSVis...
DSVs are in stock for immediate delivery.
http://www.pessco.com/mailto:[email protected]://www.pessco.com/mailto:[email protected]:[email protected]://www.pessco.com/ -
7/26/2019 Spray Vavle Catalog
3/8
SPRAY VALVE Double spring Spray Valve
PESSCO
Plant Eng ineering Solution & Service Corpor ationRm 617 Byeoksan Digital Valley, 303, Daedong-ro, Sasang-gu, Busan, Korea
TEL
FAX
:
:+82-51-329-7145
+82-51-329-7155
Web
E-mail
:
:www.pessco.com
2
MAJOR FEATURES
DSVs are constructed of Stainless Steel 316.
Each valve is furnished and secured with a
Teflon Gasket and Elastic Stop Nuts , so no
special tool is required for installation and
removal.
However, it is noted that the Elastic Stop Nut
and Lock Nutare not reusable after removal and
should be replaced with new one.
DSV can be used as a direct replacement for
spray nozzles in all Deaerators. The two-bolting
configuration makes installation and replacement
fast and easy.
DSV comes into the world with the following
features and provides high performance over-
coming the weaknesses of conventional spray
nozzles.
DSV produces a uniform, thin conical hollow
spray patternunder the wide range of flow rates
and rapid load changes.
Unlike the conventional spray nozzle designs,the valve disc maintains a 60 spray angle when
installed on the slant.
The resulting uniform spray pattern of DSV
provides design flexibility of pipe header and isideal for instantaneous heating in deaeration.
STAINLESS STEEL STEMmanufactured with drawing process.
NON-BINDING TEFLON SLEEVEminimizes friction between BODY
and STEMduring normal operating movement of stem and prevents
tilting of the valve disc when installed on the slant.
INNER & OUTER SPRINGS control sudden movement of DISC
under the operation mode changes and provides two support points
of STEM to prevent undue wear on disc.
GASKET RETAINING RING which firmly secures
Teflon Gasket to prevent slip and by pass leakage.
CAST BODY with bolted in design for easy maintenance
and replacement minimizes fluid flow resistance through
the 3 inch adapter pipe.
CONICAL PARABOLIC SHAPED DISC minimizes or prevents
the perpendicular flow impingement and insures uniform spray pattern.
http://www.pessco.com/mailto:[email protected]://www.pessco.com/mailto:[email protected]:[email protected]://www.pessco.com/ -
7/26/2019 Spray Vavle Catalog
4/8
SPRAY VALVE Double spring Spray Valve
PESSCO
Plant Eng ineering Solution & Service Corpor ationRm 617 Byeoksan Digital Valley, 303, Daedong-ro, Sasang-gu, Busan, Korea
TEL
FAX
:
:+82-51-329-7145
+82-51-329-7155
Web
E-mail
:
:www.pessco.com
3
MINIMUM
DESIGN
PESS. DROP @ DESIGN FLOW
WEIGHT
Available MaterialsA743-CF3M(S.S 316L)
1.7
17.0
18.7
0.14
0.75
m3/hr
kg/cm2
kg
m3/hr
m3/hr
D S V Unit
SPECIFICATION
MAXIMUM
FLOW RATE
A743-CF8M(S.S 316 )
LOWER BODY
STEM
OUTER SPRING
INNER SPRING
SPRING RETAINER
LOCK NUT
TEFLON SLEEVE
BODY
DISC (SPREADER)
GASKET
WASHER
ELASTIC STOP NUT
1/2" - 20NF
10
3
12
5
4
11
7
9
6
1
2
8
P.T.F.E
SILVER PLATED
http://www.pessco.com/mailto:[email protected]://www.pessco.com/mailto:[email protected]:[email protected]://www.pessco.com/ -
7/26/2019 Spray Vavle Catalog
5/8
SPRAY VALVE Double spring Spray Valve
PESSCO
Plant Eng ineering Solution & Service Corpor ationRm 617 Byeoksan Digital Valley, 303, Daedong-ro, Sasang-gu, Busan, Korea
TEL
FAX
:
:+82-51-329-7145
+82-51-329-7155
Web
E-mail
:
:www.pessco.com
4
PERFORMANCE
12010080604020
20.417.013.610.23.4 m3/hr
%
0.03
0.17
0.13
0.11
0.09
0.07
10
PRESSURE
DROP,kg/cm
2
FLOW RATE per VALVE (% of Rated Capacity ),m3/hr
1.7
0.05
0.15 DESIGN POINT
6.8
Pressure Drop
in Flow rate
Spray Angle
in Flow rate
1201008060402010
SPRAY
APEX
ANGLE,
FLOW RATE (% of Rated Capacity)
66
64
62
60
5856
54
52
50
48
46
%
http://www.pessco.com/mailto:[email protected]://www.pessco.com/mailto:[email protected]:[email protected]://www.pessco.com/ -
7/26/2019 Spray Vavle Catalog
6/8
SPRAY VALVE Double spring Spray Valve
PESSCO
Plant Eng ineering Solution & Service Corpor ationRm 617 Byeoksan Digital Valley, 303, Daedong-ro, Sasang-gu, Busan, Korea
TEL
FAX
:
:+82-51-329-7145
+82-51-329-7155
Web
E-mail
:
:www.pessco.com
5
SPRAY PATTERN
You can see the Benchmark Test that compared DSVwith Conventional Valve on Our Website.
Unit : m3
/h
6.0
8.0
10.0
12.0
14.0
16.0
18.0
19.0
http://www.pessco.com/mailto:[email protected]://www.pessco.com/mailto:[email protected]:[email protected]://www.pessco.com/ -
7/26/2019 Spray Vavle Catalog
7/8
SPRAY VALVE Double spring Spray Valve
PESSCO
Plant Eng ineering Solution & Service Corpor ationRm 617 Byeoksan Digital Valley, 303, Daedong-ro, Sasang-gu, Busan, Korea
TEL
FAX
:
:+82-51-329-7145
+82-51-329-7155
Web
E-mail
:
:www.pessco.com
6
RELATED PRODUCT
- Tray
Type 430Material
on Stainless Steel
Dimension,
mm
Type 316 & 316L
TRAY
Assembly
16 Gauge Stainless Steel
All Riveted Construction
8 Trays per Assembly
Slots for Hold down Rods
Type 304 & 304L
37
inchSize
30
inch
24
inch
Weight, kg
Height
5.1 4.3 3.5
Width
Length
280
102
940 762 610
37 inch
30 inch
24 inch
102
102
102
http://www.pessco.com/mailto:[email protected]://www.pessco.com/mailto:[email protected]:[email protected]://www.pessco.com/ -
7/26/2019 Spray Vavle Catalog
8/8
Plant Engineering Solution & Service CorporationPESSCO CO., LTD.
PESSCO
Any further information about PESSCO, please visit our website
Rm 617, Byeoksan Digital Valley, 303, Daedong-ro ,
Sasang-gu, Busan,
KOREA
TEL FAX: +82-51-329-7145 +82-51-329-7155
HEAD OFFICE
FACTORY 82, Hwajeon Sandan2-ro,Gangseo-gu, Busan
KOREA
:
www.pessco.com