Spray Polyurethane FoamRoofing System

Carlisle Roof Foam and Coatings’ spray polyurethane foam roof system is a spray-in-place insulation made of rigid, closed-cell spray polyurethane foam (SPF). This fully adhered, self-fl ashing system is seamless and seals all penetrations with no joints or fasteners. SPF can be sprayed in place in a way that builds slope to enhance drainage and minimize ponding water.

SPF roof systems are ideal for re-roofi ng, restoration work, new construction, and deliver the following features and benefi ts:

Superior leak protection

Increased energy savings due to a superior continuous insulation with

minimal thermal bridging

Fully adhered, self-fl ashing system

High compressive strength and exceptional durability

No seams, joints, thermal breaks, or penetrating fasteners

Renewable, sustainable, and low maintenance

Excellent wind uplift performance

Carlisle Roof Foam and Coatings’ SPF is compatible with a variety of roof coatings, including silicone, acrylic, and urethane. These coatings add UV resistance and a second waterproofi ng layer to the SPF roof system.

Sustainable. Seamless. Solutions. 100 Enterprise Drive • Cartersville, GA 30120 • 844.922.2355

www.CarlisleRFC.com

Carlisle, PremiSEAL and PremiR+ are trademarks of Carlisle.

PremiSEAL 40

PremiSEAL 60

PremiSEAL 70

PremiSEAL 80

PremiR+ 40

PremiR+ 60

PremiR+ 70

Available in reactivities of very slow (VS), slow (S), regular (R), fast (F), and very fast (VF). Corresponding SPF number

denotes compressive strength.

with Low Global Warming Potential (LGWP)

05.13.20 © 2020 Carlisle.REPRINT CODE: 611240 CRFC-10208 - “Spray Foam Roofi ng System Brochure”

PremiSEAL™ is a sprayed-in-place, HFC-blown, closed-cell spray polyurethane foam (SPF). Carlisle Roof Foam and Coatings offers the following PremiSEAL products: PremiR+

™ is a sprayed-in-place, HFO-blown, closed-cell spray polyurethane foam (SPF). Carlisle Roof Foam and Coatings offers the following PremiR+ products: