INSTRUCTIONS

1. Print or stick sheets onto card.

2. Cut out all the parts carefully. Be careful not to cut the wings in half.

3. Bend wing halves A & B together, and glue to make one full wing. The design should now be on the outer sides.

4. Very carefully, cut through the dotted line in the middle of the wing to make a slit. This is how the wings will be attached to the body.

5. To make the body, stick side C & D together but do not glue the flaps together.

6. Cut down the dotted line in the plane's tail to make a slit.

7. Cut out & glue together the two halves of F to make the rudder.

8. Cut down the dotted line to make a slit. This is how the rudder will be attached to the body.

9. Cut out the propeller (E) & snip the dotted line to create a slit.

10.Now you’re ready to colour in & decorate the plane in your own design - it doesn’t have to be camouflage!

11. To attach the wings to the body of the plane, pull the flaps of the body through the slit in the wings and glue them underneath the wings to secure.

12.Now attach the propeller & the rudder by sliding them into place on the plane’s body.

F. Rudder

E. Propeller